Search NASA⌕ Search

SEARCH · Search NASA

Results for “Significance Determination Process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Characterization of Infrasonic Signatures of Earth-Grazing Fireballs as Analogues to Hypersonic Vehicles (Final Report)

Accurate detection, discrimination, and characterization of high-altitude hypersonic events using infrasonic monitoring are critical to planetary defense and global strategic surveillance. This report synthesizes recent advances achieved through rigorous analysis of infrasonic signatures from natural meteoroids, emphasizing shallow entry-angle meteoroids as essentially proxies for artificial hypersonic systems. Meteoroids naturally encompass diverse velocities, trajectories, altitudes, and fragmentation behaviors, enabling systematic validation of empirical period–yield relationships, waveform morphology classifiers, and trajectory-induced back-azimuth deviation models. Integration of adaptive array-processing enhancements within Cardinal software further extends infrasonic detection sensitivity and signal classification reliability. Collectively these advances, based solely on infrasonic signatures or limited optical data, offer robust methodologies for distinguishing natural from artificial hypersonic sources, significantly reducing event geolocation uncertainties and refining source-function determination. The outcomes detailed herein lay foundational groundwork for improved global hypersonic event-surveillance frameworks, supporting improved security preparedness and informing strategic monitoring and defense policies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Experimental analysis of conductive drying of paper and board

The primary heat transfer source in the conventional multi-cylinder drying of paper and board is conduction. Conduction is facilitated by high-tension contact with steam-heated cylinders, while convective drying, the main mass transfer source, operates as heated air flows over the paper web in the pockets. This conduction process occurs at elevated temperatures and contact pressures to ensure effective contact between the wet paper web and the heated cylinders. The contact pressures and temperatures of the hot surface significantly influence the conductive drying characteristics. This research paper presents an experimental study that involves designing a simple lab-scale setup with in-situ and continuous sensing capabilities for various commercially available grades of paper and board. Embedded thermocouples measure the temperatures of the heated platen and the sheet, allowing the collection of flux data to determine heat transfer characteristics. Here, the goal of this study is to ascertain the instantaneous contact coefficients for different basis weights as a function of moisture content. The acquired data will provide valuable insights and information towards process development, design and simulation of the paper drying process.

42 ENGINEERING↗
DOE OSTI2026

Mechanistic Studies of an Iron-Catalyzed Intermolecular C–H Amination Reaction under Catalytic Conditions and Having a Large KIE

The conversion of C–H bonds into amines by nitrene insertion is an attractive transformation since it is both atom- and step-economical, and provides a direct route to functionalizing hydrocarbons. Using an iron catalyst [{( tBu pyrr) 2 pyr}Fe(OEt 2 )] (1-OEt 2 ) (( tBu pyrr) 2 pyr 2– = 3,5- t Bu 2 -bis(pyrrolyl)pyridine), we recently demonstrated the catalytic conversion of weak C–H bonds into secondary amines using aryl azides as the nitrene source [Zars, E.; Angew. Chem., Int. Ed. 2023, 62, e202311749]. Here, we describe detailed mechanistic studies of this intermolecular C–H amination reaction under catalytic conditions. We find by Variable Time Normalization Analysis (VTNA) that the conversion of xanthene (2-H 2 ) and 2,4,6-trimethyl-phenyl azide ( Me 3) catalyzed by 1-OEt 2 is an overall 3/2 order process, being 1 st order in 2-H 2 and half order in Me 3. A kinetic isotope effect study (KIE) using 2-d 2 results in a significant decrease in the rate (KIE = 61(15)), which clearly implicates the C–H insertion step as rate-determining. Furthermore, treatment of 1-OEt 2 with one equivalent of N 3 -2,6- i Pr 2 –C 6 H 3 yields the mixed-valence C–N coupled product [( tBu pyrr) 2 pyrFe-N═C(2,6 i Pr 2 –Ph)═N-(2,6 i Pr 2 –Ph))Fe tBu pyrrpyr(2-H-pyrr)] (5 iPr ). Quantum chemical calculations confirm the electronic structure of the mixed-valence dimer in 5 iPr and rationalize the Hammett correlation by a delicate balance in the dinuclearization of the catalytically active monomers. Calculations further indicate significant tunneling for the pivotal H atom abstraction by the iron-imidyl complex. Combining all these results allows us to propose a mechanism consisting of imido formation in equilibrium with a radical-coupled diiron system, followed by stepwise C–H insertion via a linear H atom abstraction transition state and subsequent radical rebound.

azides↗
DOE OSTI2025

Self-consistent analysis for the η c → γ γ process

The next-to-next-to-leading-order (NNLO) perturbative QCD (pQCD) predictions for both the decay width and the transition form factor in the η c → γ γ process, based on nonrelativistic QCD (NRQCD), deviate from precise experimental measurements. These significant discrepancies have cast doubt on the applicability of NRQCD to charmonium processes. In this paper, we analyze the η c → γ γ process by applying the principle of maximum conformality (PMC), a systematic method for eliminating renormalization scheme-and-scale ambiguities. The PMC renormalization scales are determined by absorbing the nonconformal β -terms that govern the behavior of the QCD running coupling via the renormalization group equation. We obtain the PMC scale Q ⋆ = 4.49 m c for the η c → γ γ decay width. Even after using the PMC method, the convergence of the pQCD series is still poor, which indicates the importance of uncalculated next-to-next-to-next-to-leading-order and higher-order terms. The resulting value for Γ η c → γ γ is in agreement with the Particle Data Group’s reported value of Γ η c → γ γ = 5.1 ± 0.4 keV within the bounds of uncertainties. Moreover, the transition form factor obtained using the PMC is also in good agreement with precise experimental measurements. The application of the PMC suggests a potential resolution to η c → γ γ puzzle and supports the applicability of NRQCD to charmonium processes. Published by the American Physical Society 2025

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Design and Validation of a Cryogenic Dilatometer

This project focuses on the design and development of a cryogenic dilatometer capable of measuring the thermal expansion of materials at extremely low temperatures. Understanding how materials change dimension with temperature is critical for applications involving cryogenic environments, particularly laminated systems housing superconducting magnets, where small dimensional changes can significantly affect performance and reliability. To address this, a dilatometer system was designed to operate within a liquid nitrogen environment while accurately measuring displacements caused by thermal contraction. The purpose of this device is to determine the coefficient of thermal expansion (CTE) of a material. The design process involved defining functional requirements, developing mechanical and thermal concepts for the measurement apparatus, selecting appropriate materials compatible with cryogenic temperatures, and integrating sensors capable of detecting small dimensional changes. The resulting system aims to provide a practical and repeatable method for evaluating material thermal expansion at cryogenic temperatures, supporting research into composite use in superconducting applications that require accurate characterization of material behavior in low-temperature environments.

Schmitt, Nicholas [Northern Illinois U.]↗
DOE OSTI2024

Nuclear Thermal Energy Storage Configurations for Industrial Combined Heat and Power Supply: Conceptual Study and Engineering Designs

The industries examined in this report primarily rely on moderate-temperature heat provided by gas- or coal-fired boilers and combined heat and power (CHP) plants, delivered through standard process steam systems. High-temperature energy demands are often industry-specific and typically exceed the capabilities of high-temperature gas-cooled reactors (HTGRs). While it is technically feasible to replace process steam from fossil-based heat sources with nuclear energy, certain industries, such as methanol production and pulp and paper, face technoeconomic challenges in integrating nuclear energy without major changes or a technological shift. This is mainly due to the limited external energy demand remaining after the use of internal byproducts, waste heat recovery, and simple efficiency improvements. Achieving full decarbonization of these processes with nuclear energy would require significant technological advancements, involving experimental technology and substantial investments, making widespread adoption in existing industrial plants unlikely in the near term. This study reviews TES options in the context of enabling a flexible CHP supply while maintaining a steady nuclear heat input. Heat storage systems that interface between the reactor primary fluid and the CHP system offer superior performance and flexibility. Specifically, steam extraction downstream of the reheater with a two-tank molten-salt TES appears as the best solution regarding thermodynamic system benefits and system drawbacks. Using selected system configurations, a conceptual design of an industrial energy park was developed for industries with varying energy demands, such as steel production plants utilizing electric arc furnaces (EAFs) and chemical plants, as well as for those with constant energy demands, like petroleum refineries. This design highlights the capabilities of TES and explores its potential business cases. The study also conceptually develops the potential for integrating additional energy sources with nuclear systems through the implementation of TES. The potential of the HTGR-TES-CHP system was also evaluated considering key uncertainties such as industrial demand profiles, external grid access availability, and eligible tax credit levels, using the Holistic Energy Resource Optimization Network. Sensitivity of net present value to these uncertainties was analyzed to determine the optimal number of nuclear reactors (and CHP systems) and the suitable TES capacity. The results were interpreted from a decision-maker’s perspective, focusing on three key areas: deployment strategy (oversized units vs. undersized units with TES support), industrial process characteristics (thermal-intensive single profiles vs. electricity-intensive combined profiles), and operational goals (maximizing profits vs. minimizing natural gas (NG) consumption or external grid dependence). The optimization results indicate that the HTGR-TES-CHP system significantly reduces reliance on NG boilers for individual industrial processes by 9-60% (in NG capacity factor), with an average reduction of 38%, compared to standalone NG boiler operation case (Business As Usual [BAU]). For combined industrial processes, the reduction ranges from 37-77%, with an average of 60%. Additionally, the system greatly reduces dependence on external grids. In meeting industrial electrical demands, a 33-100% self-sufficient internal electricity supply is achieved for single industrial process, with an average of 74%, compared to the BAU scenario, where 100% of electricity is imported. For combined processes, 35-100% of internal electricity demands are met by the reactor, with an average of 73%. At last, the relative NG price levels at which the proposed HTGR-TES-CHP system can cost-effectively enter the market currently dominated by existing NG boilers were estimated. For a moderate HTGR CAPEX level ($\$$2500/kWth, $\$$6329/kWe), the analysis suggests that NG prices must be 2.5 to 7 times higher than HTGR variable operating and maintenance costs for single industrial process, and 5.5 to 9.5 times higher for a combined process scenario. Tax credit modeling shows that the Investment Tax Credit significantly reduces the price threshold needed to break even, making the system competitive with NG boilers in certain cases.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Surveying Phase Modifier Functional Groups for Applications to Ln(III) Separations

The application of N,N,N',N'-tetraoctyl diglycolamide (TODGA) in solvent extraction systems for lanthanide (Ln) separations is well understood. In these systems, the formation of a third phase has motivated the use of phase modifiers to enable higher concentrations of H + and Ln common to industrial processes. Several different phase modifiers with applications to diglycolamide (DGA) systems have previously been reported, with a focus on tri-n-butyl phosphate (TBP), N,N'-dihexylactanamide (DHOA), N,N-dioctyl-2-hydroxyacetamide (DOHyA), N,N'-dimethyl-N,N'-dioctylhexylethoxy malonamide (DMDOHEMA), and octanol. While the primary utility of phase modifiers is the increased metal loading, they can have significant effects on the metal distribution ratios, which are well described by the energetics of the extraction process itself. However, the mechanisms by which phase modifiers impact distribution ratios are not generally understood. This work considers the ability of phase modifiers to affect Ln distribution ratios by using phase modifiers with two different functional groups (–Cl and –C≡N) and an octyl alkyl chain in a TODGA and n-dodecane system. Determining the effect of chlorooctane and octane nitrile is important for understanding how phase modifier functional groups and their hydrogen bonding interactions affect Ln extraction. Through combining distribution ratio measurements with organic phase spectroscopic investigations, the impact of chlorooctane and octane nitrile on Ln extraction and their inner-sphere complexes is reported. The addition of either chlorooctane or octane nitrile to TODGA in n-dodecane decreases Ln extraction while maintaining the same inner-sphere Ln complex. The lack of change in inner-sphere Ln-TODGA coordination upon incorporation of phase modifiers and the significant impact of these phase modifiers on distribution ratios suggest the importance of a supramolecular structure. Understanding the role of chlorooctane and octane nitrile on the organic phase structure at longer length scales has been identified as an avenue for future investigations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Techno-Economic and Life Cycle Assessment of Chemical Recycling and Upcycling of Mixed Plastics Waste Containing Poly-vinyl-chloride

Developing technologies that completely remove chlorine from plastic waste can allow its chemical recycling and upcycling with catalytic methods. Here, this study compares eight processes involving different dechlorination methods (absorption columns, adsorption in beds of zeolites, catalytic dechlorination, and dissolution in ionic liquids) and chemical conversion technologies (incineration, pyrolysis, hydrogenolysis) to upgrade mixed plastics waste to various products (e.g., electricity, fuels, virgin polymers, and lubricant oil). The analysis determines that the absorption of chlorine in columns with basic aqueous solutions is limited to plastics waste with PVC concentrations below 0.1%. Dissolution in ionic liquids is not cost-competitive. On the contrary, two-step processes with catalytic dechlorination followed by thermochemical catalytic depolymerization, either pyrolysis or hydrogenolysis, significantly improve process economics and emissions. The most economically viable alternative is hydrogenolysis for producing lubricants, while the technology with the lowest global warming potential is chemical recycling via catalytic pyrolysis.

circular economy↗
DOE OSTI2025

Large radiation back-flux from Monte Carlo simulations of fusion neutron–material interactions

Abstract Fusion power reactors will generate intense neutron fluxes into plasma-facing and structural materials (SMs). Radiation back-fluxes, generated from neutron–material interactions under these fluxes, can dramatically impact the plasma dynamics, e.g. by seeding runaway electrons during disruptions via Compton scattering of background electrons by wall-emitted gamma radiation. Here, we quantify these back-fluxes, including neutrons, gamma rays, and electrons, using Monte Carlo calculations for a range of SM candidates and first wall (FW) thicknesses. The radiation back-flux magnitudes are remarkably large, with neutron and gamma radiation back-fluxes on the same order of magnitude as the incident fusion neutron flux. Electron back-fluxes are two orders of magnitudes lower, but are emitted at sufficiently high energies to impact the sheath and boundary plasma dynamics. Material configuration plays a key role in determining back-flux magnitudes. The SM chiefly determines the neutron back-flux magnitude, while the FW thickness principally attenuates the gamma ray and electron back-fluxes. In addition to prompt back-fluxes, which are emitted immediately after fusion neutrons impact the surface, significant delayed gamma ray and electron back-fluxes arise from nuclear decay processes in the activated materials. These delayed back-flux magnitudes range from 2% to 7% of the prompt back-fluxes, and remain present during transients when fusion no longer occurs. During disruptions, build-up of delayed gamma radiation back-flux represents potential runaway electron seeding mechanisms, posing additional challenges for disruption mitigation in a power reactor compared with non-nuclear plasma operations. This work highlights the impact of these radiation back-fluxes plasma performance and demonstrates the importance of considering back-flux generation in materials selection for fusion power reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Report Summarizing the Mechanical Properties of a Large ODS Ferritic Alloy Ingot by Forging at High Temperatures for Future Mother Tube Production

Oxide dispersion strengthened (ODS) ferritic alloys are considered the benchmark fuel cladding and core structural material in advanced nuclear energy reactors that require high-temperature strength and creep properties and resistance to radiation damage. The ODS ferritic alloys including 14YWT are produced by mechanical alloying (MA), which is time-consuming and is associated with high manufacturing costs that are not beneficial to being used in advanced nuclear energy reactors. This report summarizes the accomplishments in FY24 in the INM program for producing an ODS ferritic alloy by high-deformation, high-temperature processing of reactive and ferritic alloy powders for advanced reactor fuel cladding applications. Following four hot forging experiments, it was concluded that several significant challenges were encountered that were difficult to overcome. These challenges were related to using high annealing temperatures for pressure assisted sintering processes to produce dense microstructures, but the high annealing temperatures result in long range diffusion of Ti through the bcc Fe lattice and react with the YIG particles that are distributed on the prior surfaces of the ferritic alloy powders. In addition, it was determined that the high deformations induced by forging at high temperatures were not very effective for fracturing the reactive YIG particles into smaller particles and distributing them into the interior of the ferritic alloy powders. Spark plasma sintering was attempted for shortening the time at high temperatures, which led to full densification but the microstructure characterization results still showed that Ti atoms diffused over long distances in the bcc Fe lattice and reacted with the YIG particles. Finally, a short 30 minute high intensity ball milling experiment was conducted on blended 14WT and YIG powders for inducing severe deformations that caused the initially spherical powders of 14WT decorated with the YIG particles on the surfaces to transform to flakes and fracturing of YIG particles into smaller particles that were incorporated into the bcc Fe lattice. Two forgings were performed with the high intensity milled powders: first annealing for 20 minutes at 850ºC followed by forging and second annealing for 20 minutes at 1,100ºC followed by forging. At 850ºC, Ti atoms are effectively immobile, thus allowing for densification albeit incomplete. The deformation by forging after annealing for 20 minutes at 1,100ºC favored dynamic recrystallization processes that led to nano-size grains with very high stored energy due to high dislocation density. The corresponding VH data showed significant hardening that correlated with estimated strengthening of ~1650 MPa. This hybrid processing approach combining high intensity ball milling of powder with annealing and forging showed the most promise for producing an oxide dispersing strengthened ferritic alloy.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Deep Learning Approaches for Predicting the Surface Tension of Ionic Liquids

Ionic liquids (ILs) are a novel class of solvents that have attracted significant attention due to their unique and tunable properties. Among their physiochemical characteristics, surface tension plays a critical role in various industrial applications including electrolytes, heat transfer fluids, and separation processes. However, because of the exploratory nature of IL design and the vast combinatorial space of possible anion–cation pairs, the experimental determination of these properties is often impractical, being both time-consuming and costly. To overcome these challenges, computational approaches are increasingly employed to develop accurate predictive models that can accelerate IL discovery and design. In this study, we present two deep learning (DL) models for predicting the surface tension of ILs across a broad temperature range at a constant pressure. The models use simplified molecular input line entry system, SMILES, representations of ILs to extract molecular features as inputs. Both DL models demonstrate excellent agreement with experimental data, achieving an R 2 value of 0.990 and a root-mean-square error of 0.792 mN/m. In conclusion, these results offer valuable insights for the rapid screening and rational design of ILs with tailored surface tension values.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Operando synchrotron X-ray analysis of melt pool dynamics in an Al-Sn immiscible alloy

The melt flow in an Al-50vol.% Sn immiscible alloy, produced by single-track laser melting of Al and Sn elemental powders, was studied in real time. High-speed synchrotron X-ray imaging was used to track Al and Sn liquids’ movements, and also to examine elemental distributions in the laser tracks, complimented by electron microscopy after solidification. Key aspects, including melt pool geometry, keyhole instability, and flow dynamics (flow pattern and velocity), were examined using digital image analysis. Relatively deeper melt pools formed at 400 W and 300 mm/s exhibited greater stability, with smooth surfaces, consistent outward flow, and minor vortices near the keyhole. In contrast, shallower pools produced at higher scanning speeds (>500 mm/s) demonstrated greater instability with increased surface waviness, and stronger velocity fluctuations, leading to numerous micro-vortices and increased Al-Sn heterogeneity. Velocity scale estimations, supported by experimental observations, examined the roles of vapour pressure, Marangoni effect, buoyancy, inertial, and surface tension forces in the flow. The results revealed that vapour pressure and mechanical waves dominated at high scanning speeds (shallow pools), while Marangoni forces were equally significant in deep pools at lower speeds (300 mm/s). Buoyancy was found to have minimal impact in both cases. Furthermore, the interaction between inertial and surface tension forces played a critical role in determining the degree of waviness of the pools’ surfaces. These findings offer valuable insights into melt pool dynamics during laser processing of immiscible alloys and other metallic systems using elemental powders, and provide guidance for developing high-fidelity computational fluid dynamics models.

immiscible alloys↗
DOE OSTI2024

Experimental validation of a collision-radiation dataset for molecular hydrogen in plasmas

Quantitative spectroscopy of molecular hydrogen has generated substantial demand, leading to the accumulation of diverse elementary process data encompassing radiative transitions, electron-impact transitions, predissociations, and quenching. However, their rates currently available are still sparse, and there are inconsistencies among those proposed by different authors. In this study, we demonstrate an experimental validation of such a molecular dataset by composing a collisional-radiative model (CRM) for molecular hydrogen and comparing experimentally obtained vibronic populations across multiple levels. From the population kinetics of molecular hydrogen, the importance of each elementary process in various parameter space is studied. In low-density plasmas (electron density ne≲1017 m−3) the excitation rates from the ground states and radiative decay rates, both of which have been reported previously, determine the excited state population. The inconsistency in the excitation rates affects the population distribution the most significantly in this parameter space. However, in higher density plasmas (ne≳1018 m−3), the excitation rates from excited states become important, which have never been reported in the literature, and may need to be approximated in some way. In order to validate these molecular datasets and approximated rates, we carried out experimental observations for two different hydrogen plasmas; a low-density radio frequency heated plasma (ne≈1016 m−3) and the Large Helical Device (LHD) divertor plasma (ne≳1018 m−3). The visible emission lines from EF1Σg+, HH¯1Σg+, D1Πu±, GK1Σg+, I1Πg±, J1Δg±, h3Σg+, e3Σu+, d3Πu±,g3Σg+, i3Πg±, and j3Δg± states were observed simultaneously and their population distributions were obtained from their intensities. We compared the observed population distributions with the CRM prediction, in particular the CRM with the rates compiled by Janev et al., Miles et al., and those calculated with the molecular convergent close-coupling (MCCC) method. The MCCC prediction gives the best agreement with the experiment, particularly for the emission from the low-density plasma. However, the population distribution in the LHD divertor shows a worse agreement with the CRM than those from low-density plasma, indicating the necessity of the precise excitation rates from excited states. We also found that the rates for the electron attachment is inconsistent with experimental results. This requires further investigation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Ultimate brightness of a medium-energy synchrotron light source at operational beam intensity

Synchrotron light sources are key instruments of modern science, providing unique opportunities for groundbreaking studies in diverse scientific disciplines and driving innovation in numerous scientific and technological fields. Fourth-generation light sources provide unprecedented capabilities in imaging, spectroscopy and diffraction techniques. Ultimate brightness is the key to advancing to a smaller scale, faster response, and higher data measurement and processing rate. The brightness is primarily determined by the electron beam emittance and energy spread at operational intensity. A common feature of fourth-generation synchrotrons is the short length of the electron bunches combined with a very small transverse beam size. Consequently, the high particle density leads to strong collective effects that significantly increase the emittance and limit the achievable brightness at operational beam intensity. In this article, we summarize our studies of the emittance and brightness scaled with the beam energy and intensity, taking into account the effects of intrabeam scattering, beam-impedance interaction and bunch lengthening provided by higher-harmonic RF systems to identify optimal combinations of machine and beam parameters.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Scatter and Blur Corrections for High-Energy X-Ray Radiography

High-energy X-ray radiography is useful as a highly penetrating method for imaging through dense materials. However, the primary modes of interaction of X-rays at these energies involve scattering or the production of secondary high-energy photons, which can interfere with the image. In addition, detector blurring, often resulting from scatter within the detector, can reduce image sharpness. Both of these processes can be mitigated with the use of convolution kernels, with the main challenge being that the proper kernel to use is not known, particularly for the scatter contribution. By radiographing solid slabs of uniform attenuation, we show that point spread functions and material-specific point scatter functions can be determined to significantly reduce the effect of detector blurring and object scatter. Constraining the fits to the slabs and uniform transmission within the slabs is sufficient to recover these functions. A functional form that reproduces the angular distribution of high-energy bremsstrahlung X-rays is presented for recovering point scatter functions. In conclusion, the method is applied to radiographs of objects from bremsstrahlung X-ray sources operating at 4- and 7.5-MV endpoint energies and a significant increase in sharpness is observed.

Blind deconvolution↗
DOE OSTI2025

The Emergence and Promise of Functional Chemogeography of Organic Matter

Organisms in ecosystems continuously release a myriad of organic matter molecules that undergo microbial and abiotic transformation, processes that critically influence carbon storage and climate feedbacks. Yet, a systematic understanding of what determines the transformation and persistence of organic matter across spatiotemporal scales remains elusive. We propose an emerging framework, termed “functional chemogeography,” to understand transformation and persistence of organic matter based on the chemical traits of molecules. This framework extends beyond a sole focus on intrinsic traits, which remain relatively constant across spatiotemporal scales, to emphasize extrinsic traits such as biochemical transformations and environmental responses, which vary spatiotemporally and are shaped by both intrinsic traits and the environment. When upscaled to the assemblage level using functional diversity indices, these extrinsic traits reveal a significant, and in some cases superior, capacity than intrinsic traits to explain biogeochemical processes, as demonstrated through a case study of dissolved organic matter in China's lakes. In conclusion, by integrating trait-based perspectives into predictive models, this framework helps bridge chemical complexity with ecosystem biogeochemistry, thereby advancing our ability to predict the fate of global organic carbon under environmental change.

chemical traits↗
DOE OSTI2024

Dark matter relic density in strongly interacting dark sectors with light vector mesons

Stable dark matter particles may arise as pseudo-Goldstone bosons from the confinement of dark quarks interacting via a non-Abelian gauge force. Their relic abundance is determined not by annihilations into visible particles but by dark pion number-changing processes within the dark sector, such as 3 π D → 2 π D . However, if the dark vector mesons ρ D are light enough for 3 π D → π D ρ D annihilations to be kinematically allowed, this process dominates and significantly delays freeze-out. As a result, the preferred dark matter mass scale increases and bounds from the Bullet Cluster can be evaded. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

A green degumming approach for lignocellulosic kenaf bast using ethanolamine deep eutectic solvent

Traditional chemical degumming methods for lignocellulosic bast fibers pose substantial challenges, especially when dealing with kenaf bast, which has a high lignin content. Here, these challenges include severe pollution and low efficiency, etc. Therefore, this study developed a novel, green, and efficient degumming approach for lignocellulosic kenaf bast, leveraging choline chloride-ethanolamine (ChCl-ETA) alkaline deep eutectic solvent (DES). The efficacy of the ChCl-ETA DES based degumming method was validated through comprehensive chemical composition analysis, scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TG), and two-dimensional (2D) nuclear magnetic resonance (NMR) spectroscopy. Subsequently, the optimal degumming conditions, with a choline chloride to ethanolamine ratio of 1:6 and a degumming temperature of 120 °C, were determined based on the results of the residual gum content. Significantly, the recycled ChCl-ETA DES mixtures could maintain a degumming capacity (revealed by the residual gum content of degummed fibers) comparable to that of the conventional double-boiling method for at least five degumming cycles without purification. Given its low-pollution process and high efficiency, this developed method holds great potential for industrial-scale applications of lignocellulosic bast fibers.

Choline chloride↗