Search NASA⌕ Search

SEARCH · Search NASA

Results for “Site preference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Pb:Sn Ratio-Driven Polytypism and Band Modulation in Photoresponsive Hexagonal Perovskitoids

Three-dimensional (3D) perovskites of the formula AMX 3 are known for their excellent optoelectronic properties, but their design is limited by the narrow range of A-site cations that can template the 3D corner-sharing structure, and many of the viable options have already been explored. These materials also face structural instability under environmental conditions. In contrast, 3D hexagonal perovskitoids, with the same chemical formula, may offer enhanced stability and richer structural diversity through a range of corner- and face-sharing octahedral configuration options, providing greater opportunities for structural design; however, challenges such as synthesis complexity and wide band gaps have hindered optoelectronic performance achieved to date. Herein, we synthesized a structural homologous series of mixed-metal hexagonal perovskitoids with the formula APb 1-x Sn x I 3 (x = 0, 0.25, 0.50, 0.75, 1; A = ethylammonium, guanidinium) and identified three polytypes (9R, 12R, 6H) using single-crystal X-ray diffraction (SCXRD). These structures exhibited increasing corner-sharing connectivity with higher Sn content, revealing a previously unobserved relationship between metal composition and structural evolution in perovskitoid materials. The incorporation of Sn reduced the band gap (tunable from 2.51 eV to 1.87 eV) and drove structural transformations, a trend seen also in density functional theory (DFT) calculations, which suggest a thermodynamic preference for Pb at face-sharing sites and Sn at corner-sharing sites. DFT band structure calculations and optical spectroscopy also reveal an anomalous behavior in these materials, which we term polytypic band modulation. This phenomenon combines conventional band bowing with the structural transformations that occur as Sn content increases, as observed in the band gap and in photoluminescence spectra. Photodiodes fabricated from thin films of these materials exhibited stable and pronounced photoresponses across various light intensities over time. Furthermore, the combination of templating 3D perovskitoids with multiple cations and alloying Pb and Sn, suggests a vastly underexplored phase space that offers new parameters to tune perovskitoids.

Cations↗
DOE OSTI2026

Upgrading Biogas through in situ Conversion of Carbon Dioxide to Biomethane in Anaerobic Digesters

Organic waste streams generated by wastewater treatment plants, agricultural operations, and food processing industries represent an important yet underutilized opportunity for renewable energy production in the United States. Through anaerobic digestion, these waste streams can produce biogas, a mixture primarily composed of methane (CH4) and carbon dioxide (CO2), that can be upgraded to pipeline-quality natural gas. However, most existing upgrading technologies remove CO2 from biogas rather than utilizing it, leaving a significant portion of the potential energy unused. This project investigates a novel biological upgrading approach that converts CO2 into additional CH4 by supplying hydrogen (H2) to specialized microorganisms capable of performing hydrogenotrophic methanation. The main challenges associated with biological biogas upgrading are related to hydrogen supply, gas-liquid mass transfer, and process stability. First, due to the high cost of hydrogen gas, it is preferable that H2 be produced on-site using renewable energy sources such as wind or solar power. Second, hydrogen has low solubility in liquids, which limits its availability to microorganisms and requires strategies to improve gas dissolution and transfer within the reactor. Third, process inhibition may occur as a result of increased pH caused by CO2 consumption or elevated H2 partial pressure, both of which can negatively affect methanogenic activity. Although research in these areas has advanced during the course of this project, these challenges have not yet been fully resolved. To date, the biological systems that have achieved the highest methane concentrations are typically ex-situ reactors, where operational conditions can be more easily controlled. For this reason, the findings of the present project remain highly relevant. The project goal was to develop an innovative system that can accomplish biogas upgrading via biological conversion of CO2 to CH4, in a novel hybrid approach that combines the advantages of both in-situ and ex-situ systems. The proposed system employs a three-phase upflow anaerobic bioreactor with H2 delivery through a gas-permeable membrane, enabling efficient hydrogen transfer and microbial conversion. Under optimized operating conditions, the system achieved 99% H2 consumption and 90% CO2 conversion. A subsequent gas cleaning stage was implemented to further improve gas quality and meet target purity standards. The upgraded gas composition reached 97.7% CH4, 2.2% CO2, and 0.97% O2, while H2S concentrations remained below detection limits. In addition, a flue gas-driven inorganic thermoelectric generator (TEG) system was designed and experimentally validated as a potential source of electricity for H2 production. The system consisted of six TEG modules connected in series and achieved an open-circuit voltage of 4.5 V and a maximum power output of 224 mW at a temperature difference of approximately 53.5 °C, demonstrating effective conversion of waste heat into electrical power under simulated flue gas conditions. Finally, a comprehensive techno-economic analysis was completed to evaluate the capital and operating costs associated with the proposed system. The results provide important insights to guide future scale-up, optimization, and potential deployment of integrated biological biogas upgrading technologies.

09 BIOMASS FUELS↗
NASA NTRS1991

Monodisperse, polymeric microspheres produced by irradiation of slowly thawing frozen drops

Monodisperse, polymeric microspheres are formed by injecting uniformly shaped droplets of radiation polymerizable monomers, preferably a biocompatible monomer, having covalent binding sites such as hydroxyethylmethacrylate, into a zone, impressing a like charge on the droplet so that they mutually repel each other, spheroidizing the droplets within the zone and collecting the droplets in a pool of cryogenic liquid. As the droplets enter the liquid, they freeze into solid, glassy microspheres, which vaporizes a portion of the cryogenic liquid to form a layer. The like-charged microspheres, suspended within the layer, move to the edge of the vessel holding the pool, are discharged, fall and are collected. The collected microspheres are irradiated while frozen in the cryogenic liquid to form latent free radicals. The frozen microspheres are then slowly thawed to activate the free radicals which polymerize the monomer to form evenly-sized, evenly-shaped, monodisperse polymeric microspheres.

Rhim, Won-Kyu↗
DOE OSTI2025

Evaluation of a high-throughput method for processing sponge-stick samples to detect viable, non-spore-forming biothreat agents

After a bioterrorism incident, surface sampling is often used to determine the extent of contamination and exposure, guiding decontamination efforts and decisions for re-occupancy of affected sites. The sponge-stick (SS) is a preferred and commonly used device for sample collection to detect both spore-forming and non-spore-forming biothreat agents from non-porous surfaces. Here, in this study, a recently developed high-throughput method (HTM) for processing SS samples to detect viable Bacillus anthracis spores was adapted for detection of non-spore-forming biothreat agents, Yersinia pestis and Francisella tularensis. The scalable HTM was used to process up to 20 SS samples simultaneously, compared to the current stomacher-based method which processes one SS at a time. Comparisons of the HTM and the stomacher-based method were statistically indistinguishable for most experiments (P > 0.05) with HTM recoveries of 37–60 % for Y. pestis inoculated at 102–103 cells/SS and held 48 h at 4 °C to mimic sample transport/storage. The HTM was integrated with Rapid Viability-Polymerase Chain Reaction (RV-PCR) analysis to detect viable Y. pestis in the presence of particulate contamination (Arizona Test Dust, ATD). This approach detected Y. pestis inoculated at 20 cells/SS and ATD did not impact detection (P > 0.05). F. tularensis showed significantly lower recoveries between no-hold time and 48-h hold time (4 °C, P < 0.05) using the HTM, which further testing showed could be due to toxicity of the neutralizing buffer used for SS pre-wetting. With modifications, this method could enhance throughput capacity while maintaining similar recovery efficiencies to current methods for other non-spore-forming bacterial pathogens.

Biological and medical sciences↗
DOE OSTI2024

Modulating metal-centered dimerization of a lanthanide chaperone protein for separation of light lanthanides

Elucidating details of biology’s selective uptake and trafficking of rare earth elements, particularly the lanthanides, has the potential to inspire sustainable biomolecular separations of these essential metals for myriad modern technologies. Here, we biochemically and structurally characterize Methylobacterium (Methylorubrum) extorquens LanD, a periplasmic protein from a bacterial gene cluster for lanthanide uptake. This protein provides only four ligands at its surface-exposed lanthanide-binding site, allowing for metal-centered protein dimerization that favors the largest lanthanide, La III . However, the monomer prefers Nd III and Sm III , which are disfavored lanthanides for cellular utilization. Structure-guided mutagenesis of a metal-ligand and an outer-sphere residue weakens metal binding to the LanD monomer and enhances dimerization for Pr III and Nd III by 100-fold. Selective dimerization enriches high-value Pr III and Nd III relative to low-value La III and Ce III in an all-aqueous process, achieving higher separation factors than lanmodulins and comparable or better separation factors than common industrial extractants. Finally, we show that LanD interacts with lanmodulin (LanM), a previously characterized periplasmic protein that shares LanD’s preference for Nd III and Sm III . Our results suggest that LanD’s unusual metal-binding site transfers less-desirable lanthanides to LanM to siphon them away from the pathway for cytosolic import. The properties of LanD show how relatively weak chelators can achieve high selectivity, and they form the basis for the design of protein dimers for separation of adjacent lanthanide pairs and other metal ions.

lanthanide biochemistry↗
NASA NTRS1976

Television applications of interline-transfer CCD arrays

The design features and characteristics of interline transfer (ILT) CCD arrays with 190 x 244 and 380 x 488 image elements are reviewed, with emphasis on optional operating modes and system application considerations. It was shown that the observed horizontal resolution for a TV system using an ILT image sensor can approach the aperture response limit determined by photosensor site width, resulting in enhanced resolution for moving images. Preferred camera configurations and read out clocking modes for maximum resolution and low light sensitivity are discussed, including a very low light level intensifier CCD concept. Several camera designs utilizing ILT-CCD arrays are described. These cameras demonstrate feasibility in applications where small size, low-power/low-voltage operation, high sensitivity and extreme ruggedness are either desired or mandatory system requirements.

Hoagland, K. A.↗
NASA NTRS1990

The NASA Environment Remote Sensing Analysis Facility (ERSAF) support for Space Shuttle earth observations

It is shown that dedicated premission, real-time, and postmission support for planning, acquiring, and interpreting remotely sensed data of specific sites in terms of illumination geometry, atmospheric transmissivity, and preferred viewing is required in order to acquire the best possible earth-viewing photography for each Shuttle mission. Mission support has resulted in significant advances for the earth observation activities and other experiments carried out by astronauts. Scientific and mission support are described and equipment and capabilities are reviewed. Future advances listed include improvement of existing data bases, expanding access to climatological databases of atmospheric constituents and aerosols, and expanding access to image data such as the DMSP, while Space Station Freedom will require 24-hour operational support.

Helms, David R.↗
NASA NTRS1973

Major element chemistry of glasses in Apollo 14 soil 14156.

Glasses in a soil sample (14156) from the middle layer of the trench at the Fra Mauro landing site show a wide range of compositions clustered around certain preferred compositions. Ninety per cent of the glasses are of two major types - Fra Mauro basalt (63%) with high K and 17 wt % Al2O3 and Highland basalt or anorthositic gabbro (27%) with low K and 25 to 26 wt % Al2O3. The glass population is almost identical with that of the comprehensive soil 14259.

Reid, A. M.↗
DOE OSTI2026

Structural effects of composition tuning in A-site disordered perovskite La0.5Li0.5−xMxTiO3 (M = Na, K) nanorods for fast interfacial transport for solid composite electrolyte design

Polymer-ceramic composite electrolytes (CPE) have emerged as promising replacements for currently used liquid organic electrolytes, which pose as safety hazards, in Li-ion batteries. Limits in conductivity enhancement in CPEs is often attributed to a high resistance for Li-ion transport along the interface due to the incompatibility of the polymer and ceramic phases. A clear understanding of the interfacial structure and how this impacts interfacial Li-ion transport is needed in order to efficiently design a CPE with optimal ionic conductivity. In this study, density functional theory (DFT) calculations, in conjunction with scanning transmission electron microscopy (STEM) and electron energy loss spectroscopy (EELS), are used to unveil the bulk and surface structure of La0.5Li0.5−xMxTiO3 (M = Na, K) (LMTO) nanorods, a newly-reported ceramic system with promising applications in CPEs, and the LMTO interactions with the poly(lithium sulfonyl (trifluoromethane sulfonyl)imide methacrylate) (p(MTFSILi)) polymerized ionic liquid. Substitution of lithium for sodium and potassium onto the A-site perovskite lattice is shown to increase the stability of the preferred pseudocubic perovskite phase because of their increased cation size which allows them to reduce the TiO6 octahedral rotations in the bulk and at the surface. STEM and EELS results show that LMTO nanorods with differing compositions have Ti-enriched (110)-oriented surfaces. Increased sodium and potassium compositions in LMTO is also shown using the DFT calculations to weaken the binding of the lithium atom to the MTFSI unit when LiMTFSI is adsorbed to the LMTO surface. This weakening of lithium binding to the polymer at the LMTO interface indicates that the lithium mobility is increased, correlating to an increase in interfacial Li-ion transport. Overall, this work provides insights into how to tune the interfacial interactions between the polymer (p(MTFSI)) and ceramic (LMTO) for optimal CPE design.

Shepard, Lauren B [Pennsylvania State University, ↗
DOE OSTI2025

Flux-Assisted Boron Chalcogen Mixture (BCM) Method for Synthesizing Mixed Chalcogenide Semiconductors (AkRE 2 Si 2 Se x S 8– x and CaRE 2 Si 2 Se 8 ) ( Ak = Ca and Sr; RE = La, Ce, Pr, Nd, and Sm): Investigation of Their Magnetic and Optical Properties

We report a detailed structural analysis of a series of ten quaternary rare-earth-containing seleno-thiosilicates AkRE 2 Si 2 Se x S 8-x and selenosilicates, CaRE 2 Si 2 Se 8 (Ak = Ca and Sr; RE = La, Ce, Pr, Nd, and Sm). Single crystals were obtained by using the flux-assisted boron chalcogen mixture (BCM) method and single crystal X-ray diffraction was used to determine their structures. All members of the AkRE 2 Si 2 Se x S 8-x and CaRE 2 Si 2 Se 8 series crystallize in the space group R$\bar{3}$c (space group number 167) of the trigonal crystal system. The single-crystal X-ray diffraction analysis revealed a strong preference for Se/S atoms to occupy one vs. the other of the two available sites. Polycrystalline samples were used for magnetic susceptibility and UV–visible diffuse reflectance measurements. Magnetic measurements show that CaCe₂Si₂Se₁.₇₃S₆.₂₇ and CaNd₂Si₂Se₂.₅S₅.₅ are paramagnetic with negative Weiss constants (θ = –60.1 and –26.2). Diffuse reflectance analysis gives optical band gaps of 2.7(1) eV (CaLa₂Si₂Se₂.₃₈S₅.₆₂), 2.2(1) eV (CaCe₂Si₂Se₁.₇₃S₆.₂₇), 2.5(1) eV (CaNd₂Si₂Se₂.₅S₅.₅), and 2.0(1) eV (CaCe₂Si₂Se₈), consistent with density functional theory calculations. By partially or fully replacing S sites with Se it was possible to achieve band gap tuning. Photoluminescence behavior was also investigated for CaCe 2 Si 2 Se 1.73 S 6.27 via irradiation with 375 nm ultraviolet light.

BCM method↗
NASA NTRS1976

A computer analysis of ERTS data of the Lake Gregory area of South Australia with particular emphasis on its role in terrain classification for engineering

A digital computer and multivariate statistical techniques were used to analyze 4-band multispectral data. A representation of the original data for each of the four bands allows a certain degree of terrain interpretation; however, variations in appearance of sites within and between bands, without additional criteria for deciding which representation should be preferred, create difficulties for classification. Investigation of the video data groups produced by principal components analysis and cluster analysis techniques shows that effective correlations with classifications of terrain produced by conventional methods could be carried out. The analyses also highlighted underlying relationships between the various elements. The approach used allows large areas (185 cm by 185 cm) to be classified into fundamental units within a matter of hours and can be applied to those parts of the Earth where facilities for conventional studies are poor or lacking.

Lodwick, G. D.↗
DOE OSTI2025

Unveiling the lithium-ion transport mechanism in Li{sub 2}ZrCl{sub 6} Solid-State Electrolyte {ital via} deep learning-accelerated molecular dynamics simulations.

Lithium zirconium chlorides (LZCs) present a promising class of cost-effective solid electrolytes for next-generation all-solid-state batteries. The unique crystal structure of LZCs plays a crucial role in facilitating lithium-ion mobility, which further affects the electrochemical performance. To understand the underlying mechanism governing ion transport, we employed deep learning-accelerated molecular dynamics simulation on Li2ZrCl6 (trigonal alpha- and monoclinic beta-LZC), focusing specifically on the zirconium coordination environment. Our results reveal that disordered alpha-LZC exhibits the highest ionic conductivity, while beta-LZC demonstrates significantly lower conductivity, closely aligning with experimental findings. The study confirms that across all phases, lithium migration proceeds via the site-to-site hopping mechanism, where variations in site residence times critically impact the overall ionic conductivity. In alpha-LZCs, lithium ions prefer to anisotropically diffuse across interlayers as the result of a lower energy barrier, driven primarily by collective diffusion. In contrast, lithium ions in beta-LZC primarily isotropically diffuse within the intralayer, hindered by higher energy barriers and determined by individual diffusion. The variation in ZrCl6 2- octahedral unit softening, induced by the specific layered arrangement of zirconium atoms, emerges as a critical determinant of the energy barriers across the LZC phases. These atomic-scale insights into the transport processes provide valuable guidance for the rational design and optimization of LZCs-based electrolytes, accelerating their practical application in advanced energy storage technologies.

Guo, Hanzeng↗
DOE OSTI2025

QM Investigation of Rare Earth Ion Interactions with First Hydration Shell Waters and Protein-Based Coordination Models

Here, conventional methods for extracting rare earth metals (REMs) from mined mineral ores are inefficient, expensive, and environmentally damaging. Recent discovery of lanmodulin (LanM), a protein that coordinates REMs with high-affinity and selectivity over competing ions, provides inspiration for new REM refinement methods. Here, we used quantum mechanical (QM) methods to investigate trivalent lanthanide cation (Ln 3+ ) interactions with coordination systems representing bulk solvent water and protein binding sites. Energy decomposition analysis (EDA) showed differences in the energetic components of Ln 3+ interaction with representatives of solvent (water, H 2 O) and protein binding sites (acetate, CH 3 COO – ), highlighting the importance of accurate description of electrostatics and polarization in computational modeling of REM interactions with biological and bioinspired molecules. Relative binding free energies were obtained for Ln 3+ with coordination complexes originating from binding sites in PDB structures of a lanthanum binding peptide (PDB entry 7CCO) and LanM, with explicit consideration of the first hydration shell waters, according to quasi-chemical theory (QCT). Beyond the first shell, the bulk solvent environment was represented with an implicit continuum model. Ln 3+ interactions with (H 2 O) 9 and both binding site models became more favorable, moving down the periodic series. This trend was more pronounced with the protein binding site models than with water, resulting in affinity increasing with periodic number, except for the last REM, Lu 3+ , which bound less favorably than the preceding element, Yb 3+ . Using the truncated 7CCO binding site model, the magnitude and trend of the experimental Ln 3+ relative binding free energies for the whole 7CCO peptide were reproduced. Conversely, the previously reported experimental data for LanM show a preference for the earlier lanthanides; this is likely due to longer-range interactions and cooperative effects, which are not represented by the reduced models. Using the truncated 7CCO binding site model, the magnitude and trend of the experimental Ln 3+ relative binding free energies for the whole 7CCO peptide were reproduced. In contrast to the previously reported experimental data for LanM, the peptide preferentially binds the earlier lanthanides. This difference likely arises due to longer-range interactions and cooperative effects not represented by the peptide. Further investigation of Ln 3+ interactions with whole proteins using polarizable molecular mechanics models with explicit solvent is warranted to understand the influence of longer-ranged interactions, cooperativity, and bulk solvent. Nevertheless, the present work provides new insights into Ln 3+ interactions with biomolecules and presents an effective computational platform for designing specific single-site REM binding peptides more efficiently.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

3D analysis of abnormal grain growth in calcia doped alumina in the presence of large pores

Abnormal grain growth has been previously found to increase with the inclusion of large pores (∼60 µm in diameter) in 80 ppm calcium doped alumina. However, the two-dimensional analysis could not accurately describe the proximity of the abnormal grains and pores to establish a correlation. This study uses laboratory-based diffraction contrast tomography and x-ray computed tomography to spatially map the pores and abnormal grains in 3D. A preference towards the formation of abnormal grains near large pores is found when compared to all potential sites. This finding supports that the pores may be a nucleation site for complexion transitions that promote abnormal grain growth. The growth of the abnormal grains in a subsequent heat treatment at 1600°C for 16 hrs was also studied. The elongation along the principal axes is similar for both small and large grains, again supporting that abnormal grain growth was facilitated by a complexion transition.

Abnormal grain growth↗
DOE OSTI2024

Defect Properties, Anion Ordering, and Photochromic Mechanism in Yttrium Oxyhydride

Yttrium oxyhydride (YHO) undergoes a reversible photochromic transition when exposed to ultraviolet light. However, the mechanism for this transformation is not fully understood, and the structure and precise chemical composition of YHO remain under debate. Here, we use first-principles density functional theory calculations with a hybrid functional to study the structure, chemical stability, and point defect properties of YHO. As experiments have shown, we find that YHO prefers a cubic structure, with H and O anions present in equal concentrations and located on tetrahedral sites. Stoichiometric and ordered YHO is chemically stable, but it has a wide band gap of 5.01 eV, considerably larger than that measured in experiments (2.4–3.8 eV). On the other hand, Y4H10O has a smaller band gap of 2.97 eV and also has a region of chemical stability; thus, the actual material may include some fraction of this H-rich structure. The defect chemistry of YHO is dominated by anionic antisite species (H O and O H ), with hydrogen interstitials (H i ) and vacancies (V H ) also present in reasonably high concentrations. We show that antisite disorder lowers the band gap relative to the perfectly ordered structure, bringing the magnitude of the gap into closer agreement with experiment. Based on our calculations of defect migration and the positions of defect states relative to the band edges, we link the onset of photochromic behavior to the reaction H O – → V O 0 + H i – , which follows photoexcitation of a H O + defect. H i – can subsequently migrate away and be trapped by additional H O + defects, contributing to the persistence of the reaction, while the resultant oxygen vacancy, V O 0 , introduces an occupied defect state that leads to optical absorption at visible wavelengths. Our results can explain reported discrepancies between experimental and computational results for YHO, and they allow us to propose specific atomic-scale processes that can lead to photochromism. In conclusion, understanding these mechanisms is key for unlocking YHO’s application in devices ranging from smart windows and optoelectronics to electrochemical synapses for neural networks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Alkali-Metal Interlocking of 2D V 4 O 10 Sheets Defines Discretized Interlayer Shear Relationships

Low-dimensional materials manifest structural anisotropy, quantum confinement, and tightly bound excitonic states, which make them attractive building blocks that can be assembled within three-dimensional laterally stitched heterostructures, stacked van der Waals solids, and complex moiré superlattices. Ion intercalation in the galleries between layered materials provides a means of modifying interlayer separation and coupling, but it is also known to drive the shearing of the layers. In this article, we explore the distinct ligand coordination environments afforded by vanadyl oxygens of singular [V 4 O 10 ] sheets and examine how the size, polarizability, and stoichiometry of Group I cations sandwiched between such layers determine the interlocking of the sheets in stacked structures. Based on the topochemical insertion of alkali-metal ions into the layered λ-V 2 O 5 , we identify seven types of guest ion coordination sites discretized into four distinct regimes of interlayer shear in units of half octahedral widths. The coordination preferences of intercalated cations govern how they interlock 2D [V 4 O 10 ] sheets and engender specific shear conformations. We present evidence that static and dynamic disorder in guest ion arrangement modulate the magnetic structure of the intercalated compounds based on electrostatic polarization, localization of charge and spin density, and lattice distortion. The results illustrate the use of topochemical ion insertion to modulate stacking relationships and magnetic transition characteristics.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Preliminary Analysis of Nuclear-Powered Data Center Scenarios

This report provides a comprehensive analysis of the potential for nuclear energy to meet the growing energy demands of data centers (DCs). It evaluates the technical, economic, and socio-environmental implications of coupling Nuclear Power Plants (NPPs) with DCs, providing initial responses to several key research questions: What is the potential increased energy demand from DCs in the U.S., in the short, medium and long term? The U.S. is experiencing a rapid increase in energy demand from DCs, with projections indicating a total increase of 24-74 GWy(e) by 2028. Meeting this demand with nuclear energy would require 27–85 GWe of installed capacity. While this surge is expected to slow in the long term, the DC industry needs reliable, scalable, and clean energy sources. How much nuclear capacity can be deployed to meet DC demand and in which timeframe? Several pathways for increasing nuclear capacity were identified, including uprates, restarts of recently retired reactors, power purchase agreements with existing fleet, and new construction. Approximately 20‒28 GWe of nuclear capacity could be dedicated to DCs by the early 2030s. How much High Assay Low Enriched Uranium (HALEU) would be needed to support some nuclear deployment scenarios for DCs? Meeting the deployment targets announced by Google and Amazon for the Kairos Power Fluoride-Salt-Cooled High-Temperature Reactor or KP-FHR (~500 MWe by 2035) and the Xe-100 (~1 GWe by 2040), respectively, requires ramping up 19.75% enriched HALEU production to ~6 t/yr by 2040. What types of nuclear energy/DC coupling options exist, and what are the different benefits/challenges? Five coupling options were analyzed, ranging from grid-connected configurations to colocated, behind-the-meter setups. Key design considerations include the proximity to high- and/or medium-voltage transmission lines, the desired internal fault tolerance, and the sources of alternative/backup power during outages. Each coupling option offers unique benefits and challenges in terms of reliability, system costs, regulation, timeline, etc. A list of NPP/DC deployment scenarios was developed, considering existing or newly built NPP or DC projects. Colocated DCs with new small modular reactors or large reactors on greenfield and brownfield sites are the focus of this report. What types of reactors, especially what size, may be incentivized by DCs? Reactor sizing optimization revealed that the ideal reactor size and number of units depend on DC demand, coupling configurations defined in this report, and other economic factors. Larger reactors are preferred for high-demand DCs and grid-connected systems, while larger number of smaller reactors are better suited for DC configurations without grid backup. Which sites may be compatible with co-located nuclear-powered DCs? Siting those projects is a complicated evaluation factoring local water resources, grid connection availability and reliability, IT infrastructure, local work force, proximity to population zones, etc. For this effort greenfield and brownfield sites such as retired coal-fired plants were used to evaluate this question. This evaluation is not meant to recommend any particular site but it highlights key siting criteria and demonstrates large-scale site availability. What are the socio-economic impacts of co-located nuclear-powered DCs? Those projects generate substantial economic benefits to the local economy, particularly in urban settings. Hyperscale DCs colocated with nuclear power plants (sized around 1 GW of power) can create nearly 1,700 jobs for annual operations and more than 7,300 jobs among the supply chain and local businesses as a result of increased household spending. Rural projects also provide significant benefits, but at lower magnitudes compared to urban deployments.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗