SEARCH · Search NASA

Results for “Small Core”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Tungsten erosion during L-mode discharges in the DIII-D SAS-VW divertor

A series of L-mode plasma discharges was performed in the DIII-D tokamak to assess the impact of outer strike point (OSP) position and toroidal magnetic field direction on erosion and core contamination potential of the recently-installed, tungsten-coated Small Angle Slot (SAS-VW) divertor. In one discharge, in-slot emission spectroscopy measured an<48 % increase in the W gross erosion rate when the OSP was moved 3 cm outwards, away from the V-shaped vertex of the slot divertor. However, the effective W yield (erosion rate divided by the incident D flux) was, overall, insensitive to changes in OSP location. Consistently low estimates of the effective W yield based on measurements taken a few cm outwards from the vertex suggest potentially significant C surface contamination. No W emission signal was detected when orienting the toroidal magnetic field such that the ion B×∇B drift direction is pointed away from the X-point. However, measurements of W content in the plasma core for both toroidal magnetic field directions suggest the presence of additional, unmeasured sources of erosion. The difference in the measured core W density with OSP position is much greater than the difference in the measured erosion rates, which may suggest that the leakage of eroded impurities out of the divertor is governed primarily through the parallel ion temperature gradient and friction forces.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

Introducing the SLICE Method for estimating pebble-bed reactor inventories at equilibrium operation with SCALE

This paper introduces the SCALE Leap-In method for Cores at Equilibrium (SLICE) for estimating pebble-bed reactor equilibrium core isotopic inventories using capabilities in the SCALE code system, requiring only a small computational cluster and a few days of computation. This method uses an iterative approach that relies on (1) a surrogate spectrum model that captures spatial and time-dependent spectral conditions, (2) a multi-pass model that captures the pebble’s evolving nuclide inventory as a function of location and time in the core, and (3) a full-core model that captures the core’s spatial neutron flux distribution. The SLICE approach is applied to a generic fluoride salt–cooled high-temperature reactor, demonstrating fuel inventory convergence through nuclide concentration inspection across iterations and comparisons for core realizations with varying discretizations. Results agree within ~5% with another state-of-the-art code, with differences attributed to input parameter or modeling assumption variations in the equilibrium generation methods.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2025

High-Fidelity CFD Simulation of Mixed Convection and Forced Convection in a Pebble Bed Test Reactor Core

The Hermes low-power [35-MW(thermal)] reactor will be built and operated by Kairos Power LLC (KP) to demonstrate its fluoride salt-cooled high-temperature reactor (FHR) technology. In the KP FHR, the reactor core is composed of randomly packed pebbles with TRISO fuel particles inside with FLiBe flow upward through the core acting as a coolant. Previous numerical and experimental studies have been limited to either a small-size bed or to a lack of detailed measurements for heat transfer. Here, to address the lack of high-fidelity heat transfer data in a real-size FHR core, in this study, we simulated a pebble bed core with 34 374 pebbles randomly packed, similar to the Hermes reactor's size. The core radius was 14 times that of the pebble diameter, while the core height was 45 times. In this work, we were particularly interested in a mixed convection regime, where buoyancy is important. Therefore, we performed several large-eddy simulations at different Reynolds numbers (160 to 1000) with gravitational force included. The spectral element computational fluid dynamics code NekRS with graphics processing unit acceleration was used for this study. The low-Mach number approximation was applied to address property changes in the FLiBe and to account for buoyancy. A pure hexahedral mesh with 60 million elements was generated by the Voronoi cell method. At the polynomial order of 5, the total degrees of freedom was 7.5 billion. The developed case in this work is the first of its kind in terms of size and complexity. The local numerical data across the domain were obtained and compared with empirical correlations. After examining the data, we found the following conclusions. For pressure drop, the Reger correlation predicted less than a 5% error. On the other hand, for heat transfer, the Wakao correlation outperformed the others. Based on our findings, we recommend the use of the Wakao correlation for the Nusselt number calculation, and for pressure drop, the KTA (Kerntechnischer Ausschuss) correclation, among the available experimental correlations. In conclusion, the Reger direct numerical simulation-driven correlation for pressure drops should also be considered, given its best agreement with our calculations.

Mixed Convection↗

DOE OSTI2024

Influence of disorder on antidot vortex Majorana states in three-dimensional topological insulators

Topological insulator/superconductor two-dimensional heterostructures are promising candidates for realizing topological superconductivity and Majorana modes. In these systems, a vortex pinned by a prefabricated antidot in the superconductor can host Majorana zero-energy modes (MZMs), which are exotic quasiparticles that may enable quantum information processing. However, a major challenge is to design devices that can manipulate the information encoded in these MZMs. One of the key factors is to create small and clean antidots, so the MZMs, localized in the vortex core, have a large gap to other excitations. If the antidot is too large or too disordered, the level spacing for the subgap vortex states may become smaller than temperature. In this paper, we numerically investigate the effects of disorder, chemical potential, and antidot size on the subgap vortex spectrum, using a two-dimensional effective model of the topological insulator surface. Our model allows us to simulate large system sizes with vortices up to 1.8 µ⁢m in diameter (with a 6 nm lattice constant). We also compare our disorder model with the transport data from existing experiments. As a result, we find that the spectral gap can exhibit a nonmonotonic behavior as a function of disorder strength, and that it can be tuned by applying a gate voltage.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2026

Disentangling multiple gas kinematic drivers in the Perseus galaxy cluster

Galaxy clusters, the Universe’s largest halo structures, are filled with an X-ray-emitting gas with a temperature between 10 million and 100 million degrees. Their evolution is shaped by energetic processes such as feedback from supermassive black holes (SMBHs) and mergers with other cosmic structures. The imprints of these processes on gas kinematics remain largely unknown, restricting our understanding of energy conversion within clusters4. High-resolution spectral mapping with the X-Ray Imaging and Spectroscopy Mission (XRISM) observatory offers a way forward. Here we present XRISM kinematic measurements of the Perseus cluster, radially covering the extent of its cool core. We find direct evidence for at least two dominant drivers of gas motions operating on distinct physical scales: a small-scale driver in the inner approximately 60 kpc, probably associated with the SMBH feedback; and a large-scale driver in the outer core, powered by mergers. This finding suggests that, during the active phase, SMBH feedback drives gas motions, which, if fully dissipated into heat, could have a substantial role in offsetting radiative cooling losses in the Perseus core. Furthermore, our study underscores the necessity of kinematic mapping observations of extended sources to robustly characterize the velocity fields and their role in the evolution of massive halos. It further offers a kinematic diagnostic for SMBH feedback models.

Astronomy and AstroPhysics↗

DOE OSTI2025

Impacts of Small-Scale Heterogeneity on Large-Scale Subsurface Flow

Discussion of NETL's CT scanning and core characterization capabilities, followed by a rapid review of several recent publications that utilize these capabilities to answer reservoir questions at the micro scale with relevance to field scale operations.

core characterization↗

DOE OSTI2026

The effectiveness of D 2 pellet and gas injection in reducing intra-ELM tungsten erosion and heat flux in the DIII-D small angle slot divertor

Edge localized modes (ELMs) in H-mode plasmas can melt and erode plasma-facing components (PFCs) and lead to impurities in the core, reducing confinement. This study analyzes the use of D 2 pellet and gas injection for ELM mitigation on the DIII-D tokamak during the 2022 Small Angle Slot V-shaped Tungsten (W) (SAS-VW) divertor campaign, reducing W erosion and heat flux during ELMs. D α (656 nm) and WI (400.9 nm) filterscopes and Langmuir probes provide photon emission and electron density/temperature to estimate W atom erosion using the S/XB method, while surface eroding thermocouples measured ELM peak heat flux at the outer strike point (OSP). Thomson Scattering measurements of pedestal T e and n e provided input to predict W divertor erosion and heat flux during ELMs via the Free-Streaming plus Recycling Model (FSRM). While a greater D 2 mass injection rate decreased the ELM peak heat flux, the impact on W erosion was not monotonic. The average ‘large’ intra-ELM W erosion was lower for plasma shots with D 2 mass injection compared to the plasma shots without any D 2 mass injection in the SAS-VW divertor. However, plasma shots did not see significant changes in ‘large’ intra-ELM W divertor erosion as the D 2 mass injection rate increased. On average, the FSRM overestimated SAS-VW experimental intra-ELM W erosion by a factor of 6.9, but the overestimation is reduced to a factor of 3.6 with the implication of C deposition effects. Generally, experimentally measured and predicted quantities were worse for plasma shots with a lower D 2 mass injection rate and corresponding higher plasma carbon (C) impurity percentage (f C ). The discrepancies are postulated to be due to C/W material mixing, for which a simple analytic mixed-material model is presented. These results highlight the importance of incorporating and improving the robustness of a mixed-material layer model in the analysis of PFC erosion on present and future tokamak devices.

Carbon (C)↗

DOE OSTI2025

Integral X-ray diffuse scattering for studying irradiation-induced dislocation loops in single crystals

Numerical diffuse scattering cross-section calculations are used to establish a rigorous basis for determining the concentration and size distribution of dislocation loops in irradiated single crystals from integral X-ray diffuse scattering (XRDS) measurements. Differential XRDS intensities for prismatic {111} type dislocation loops are numerically calculated as a function of loop radius R and wavevectors q relative to Bragg reflections in tungsten. The results show the well known 1/q 2 Huang scattering form at small q that transitions to a ∼1/q 4 dependence associated with the Stokes–Wilson approximation for q ≳ 1/R. More importantly, they show further that the 1/q 4 falloff is not the asymptotic large-q form of the diffuse scattering for small loops (R < 200 Å) as has often been assumed. Rather, for loop sizes as small as R ≃ 5 Å with strong curvature, the calculations show definitively that the scattering transitions to a robust 1/q 5 falloff at larger q that arises due to the local strains near the dislocation core defining the circumference of the dislocation loops. The presence of this 1/q 5 asymptotic form for both small and large loops is experimentally confirmed using an integral XRDS measurement around the 110 reflection on self-ion-irradiated tungsten combined with numerically calculated integral XRDS cross-sections. Accordingly, the historical two-region theoretical treatment of the cross-sections for integral XRDS is extended to a three-region model that has direct sensitivity to the (first-moment) dislocation line lengths of dislocation loops. In conclusion, these developments enable the use of both numerical and analytically modeled cross-sections to make accurate integral XRDS determinations of dislocation loop sizes and concentrations using modest-intensity laboratory X-ray sources.

42 ENGINEERING↗

DOE OSTI2026

Multiresolution Quantum Chemistry: Nonlinear Response Properties at the Basis Set Limit

We benchmark the accuracy of Dunning correlation-consistent Gaussian basis sets for computing frequencydependent second-order hyperpolarizabilities relevant to second-harmonic generation (SHG), using multiresolution analysis (MRA) as a reference. Basis set errors are analyzed using a unit-sphere representation of the effective hyperpolarizability vector, enabling direct assessment of directional error structure. We introduce a relative RMS total error metric that integrates directional deviations over the unit sphere and complement it with signed projection errors that distinguish over- and underestimation. Unsupervised clustering based on these signed directional metrics reveals four distinct convergence behaviors across a set of 68 molecules. Unitsphere visualizations of representative systems show that basis set errors are often highly anisotropic and localized along specific bond directions, even when global error measures appear small. Doubly augmented basis sets consistently outperform singly augmented ones, and core-polarization functions are required for uniform convergence in second-row systems. Overall, this work demonstrates that directional analysis combined with clustering provides a robust framework for understanding basis set convergence in nonlinear optical response properties.

Basis sets↗

DOE OSTI2025

Web-Based Tools for Data-Informed Remedy Optimization: Software Theory and User Guide

This report documents the development and application of two web-based decision-support tools for pump-and-treat (P&T) groundwater remediation systems: PTOLEMY (Pump-and-Treat Optimized Location Evaluation to Maximize Yields) and OPTIMA (Optimization for Pump-and-Treat Implementation, Management, & Assessment). These tools enhance remedy design and management by leveraging advanced computational methods – specifically deep learning and multi-objective optimization – within a user-friendly platform. By integrating data-driven models with established hydrogeological knowledge, PTOLEMY and OPTIMA enable more efficient evaluation of well placement and operational strategies, helping site managers balance multiple remediation objectives under complex conditions. Both tools are implemented as modules within the SOCRATES (Suite Of Comprehensive Rapid Analysis Tools for Environmental Sites) web platform, which provides data access, visualization, and analytics to support remedy optimization across sites in the U.S. Department of Energy Office of Environmental Management complex. PTOLEMY is a rapid screening module designed to identify promising locations for new extraction wells. It employs a multi-channel three-dimensional convolutional neural network (MC3D-CNN) trained on high-fidelity simulation data to predict the relative performance (in terms of contaminant mass recovery) of potential well sites. Through an interactive web interface, PTOLEMY visualizes the probability of high performance across a site, highlighting areas where an extraction well is likely to yield above-threshold contaminant removal over a multi-year period. PTOLEMY’s map-based displays and exportable results support transparent communication of screening analyses. By focusing attention on the most favorable candidate locations, the tool augments traditional engineering judgment and physics-based modeling, providing a data informed basis for subsequent detailed evaluations. OPTIMA is a multi objective optimization module designed to find wellfield layouts and operating schedules that meet various cleanup goals. It quickly evaluates thousands of candidate setups – combinations of well locations, timing, and rates – and returns a small set of best trade-off options for comparison. At its core, OPTIMA uses a U-Net-based surrogate model – a deep-learning emulator of a groundwater flow and transport simulator – to dramatically accelerate scenario evaluations. Coupling this fast surrogate with the NSGA-II (Non-dominated Sorting Genetic Algorithm II) evolutionary algorithm, OPTIMA explores a wide decision space of well locations and schedules to identify Pareto-optimal solutions that trade off key objectives (e.g., minimizing cleanup time, maximizing contaminant mass removal, and minimizing plume extent). The tool outputs a family of optimal configurations and visualizes their trade-offs (Pareto frontiers of cleanup metrics and maps of optimized well placements). Site managers can use these results to understand the range of viable strategies and to select candidate designs for more detailed verification. OPTIMA is currently under active development and not yet fully released; this guide provides early documentation to support planning and gather user feedback.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Surrogate-constructed scalable-circuits adaptive variational quantum eigensolver in the Schwinger model

Inspired by recent advancements in simulating periodic systems on quantum computers, we develop an approach to further advance the simulation of these systems, named (SC) 2 -ADAPT-VQE. Our approach extends the scalable-circuits ADAPT-VQE framework, which builds an ansatz from a pool of coordinate-invariant operators defined for arbitrarily large, though not arbitrarily small, volumes. Our method uses a classically tractable “surrogate constructed” method to remove irrelevant operators from the pool, reducing the minimum size for which the scalable circuits are defined. Bringing together the scalable circuits and the surrogate constructed approaches forms the core of the (SC) 2 methodology. Our approach allows for a wider set of classical computations on small volumes, which can be used for a more robust extrapolation protocol. While developed in the context of lattice models, the surrogate construction portion is applicable to a wide variety of problems where information about the relative importance of operators in the pool is available. As an example, we use it to compute the properties of the Schwinger model—quantum electrodynamics for a single, massive fermion in 1 +1 dimensions—and show that our method can be used to accurately extrapolate to the continuum limit.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2025

Surrogate Constructed Scalable Circuits ADAPT-VQE in the Schwinger model

Inspired by recent advancements of simulating periodic systems on quantum computers, we develop a new approach, (SC)$^2$-ADAPT-VQE, to further advance the simulation of these systems. Our approach extends the scalable circuits ADAPT-VQE framework, which builds an ansatz from a pool of coordinate-invariant operators defined for arbitrarily large, though not arbitrarily small, volumes. Our method uses a classically tractable ``Surrogate Constructed'' method to remove irrelevant operators from the pool, reducing the minimum size for which the scalable circuits are defined. Bringing together the scalable circuits and the surrogate constructed approaches forms the core of the (SC)$^2$ methodology. Our approach allows for a wider set of classical computations, on small volumes, which can be used for a more robust extrapolation protocol. While developed in the context of lattice models, the surrogate construction portion is applicable to a wide variety of problems where information about the relative importance of operators in the pool is available. As an example, we use it to compute properties of the Schwinger model - quantum electrodynamics for a single, massive fermion in $1+1$ dimensions - and show that our method can be used to accurately extrapolate to the continuum limit.

Gustafson, Erik [RIACS, Mtn. View] (ORCID:00000001↗

DOE OSTI2024

Dichroic $K_β$ x-ray emission as a probe of orbital moments

Strong dichroism of the outgoing x rays is demonstrated in $K_β$ x-ray emission. Here, it is shown that while the integrated intensities are zero, the first moments of the dichroic spectra can be directly related to the orbital moments. The first moment is caused by the Coulomb interaction between the 3p core hole and the 3d valence electrons. Contributions from other interactions are negligibly small or zero. Calculations for a divalent cobalt ion in the presence of a Jahn-Teller distortion show strong dependencies of the dichroic $K_β$ emission on the angular momentum and the quadrupolar moment.

van Veenendaal, Michel↗

DOE OSTI2024

Fuel Behavior Implications of Reactor Design Choices in Pressurized Water SMRs

Small pressurized water reactors (PWRs) can feature boron free operation, natural circulation mode, reduced height assemblies and/or long refueling cycles. This paper attempts to explore core design optimization for each of these design evolutions. In consequence, five core design layouts are developed incorporating boron free operation with continuous control rods insertion, natural circulation with low burnup/low power density design, natural circulation with high burnup/low power density design, forced circulation with standard core power density design, and forced circulation with high power density design. These cores’ performance is compared to a standard 4-loop PWR. The design process aims to improve the fuel cycle cost under safety constraints through core design optimization using CASMO4E/SIMULATE3 reactor physics codes and FRAPCON4.1 fuel performance assessment tool. Core modeling assumes standard 17x17 PWR fuel assemblies loaded with low enriched uranium (LEU) up to 5wt% or LEU+ (i.e., below 10wt% enrichment) pellets with gadolinium oxide (Gd2O3) as the burnable poison. Satisfactory core and fuel performances are obtained for all the designed cores under steady state and considered overpower transients. For low power density operation, long cycle lengths are achieved reaching a 2.5- and a 5-year cycles and peak rod-average burnup is pushed to 83 MWd/kgU. Other cycle lengths are maintained at 18 months. Boron free operation exhibits the ability to achieve longer cycle lengths at the cost of higher peaking factors leading to high local power and fuel temperatures which prevents sizable power uprates and is deemed uneconomical. Fuel assembly height reduction allows coolant velocity retrofit which enables higher core power density without violating structural integrity of the fuel assembly. As a result, a core power density of 123 kW/l is reached where total cladding hoop strain becomes the limiting parameter.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2025

Equilibrium Core Model for Micro Pebble Bed Reactors Using OpenMC

Estimating the equilibrium state for pebble bed reactors (PBRs) presents complex challenges as it requires simultaneous consideration of changes in the pebbles’ movement as well as their fuel compositions. Whereas traditional approaches use multigroup diffusion codes for neutronics calculations of PBRs’ equilibrium state, the double-heterogeneity of PBRs complicates neutron cross-section generation. Continuous-energy Monte Carlo (MC) methods are better suited for detailed PBR analysis because of their natural handling of double-heterogeneity, but they demand substantially more computational resources. Here, this study introduces a novel method for efficiently estimating the equilibrium state in small and micro PBRs with reduced computational cost. The method is anticipated to accelerate the processes of core design and performing parametric studies for utilizing advanced fuel and structural materials. The HTR-10 reactor design was used for validating the method’s predictions and evaluating its computational efficiency. When compared to reference calculation values from the literature, criticality (k-effective) was predicted to be approximately within the margin of error of the MC transport calculation, average core power density (in megawatts per cubic meter) was predicted within 2.5% relative error, and maximum thermal flux (10 13 n/cm 2 .s −1 ) was predicted within 1.8% relative error. The calculated inventory of fission products and fuel composition in the equilibrium core were within 15% and 16.6%, respectively, when compared to reported values from the literature. The difference is attributed to variance in the considered values of the core temperature, which was found to significantly affect the depletion analyses.

Equilibrium core↗

DOE OSTI2025

Understanding the formation of a low-pressure pedestal in the presence of a strong internal transport barrier in DIII-D high β p plasmas

As a promising scenario for fusion reactors, the high poloidal-beta (β P ) scenario is characterized by a strong large radius internal transport barrier (ITB), which significantly enhances the overall confinement quality and the bootstrap current fraction for fully non-inductive operation. It is frequently observed that in the presence of a strong ITB, the pedestal height is lower and is accompanied by small edge localized modes (ELMs), which further improves the compatibility of a high performance core with an edge solution. A mechanism for the formation of the low pedestal is proposed in this paper. It is found that the strong ITB creates an off-axis bootstrap current to clamp the local safety factor q, and thus the magnetic shear in the outer core/pedestal region is increased. Gyrokinetic simulations with the CGYRO code show that the higher magnetic shear brings the experimental profiles into the range where the growth rate of drift-wave instabilities and thus transport is higher, and therefore a lower pedestal gradient is expected. Here, the combination of low pedestal and high magnetic shear further enhances the turbulent transport across the whole pedestal, consistent with power balance analysis. Such a positive feedback mechanism ultimately results in a lower pressure pedestal as observed in experiments. Under such a low pedestal, linear simulations with BOUT++ predict the growth rates of peeling–ballooning modes to be lower across the whole toroidal mode number spectra, and the nonlinear BOUT++ simulation exhibits lower saturated fluctuation intensity as well, consistent with the experimentally observed lower ELM size.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

Real-World Cyber Security Demonstration for Networked Electric Drives

In this article, we present the design and implementation of a cyber-physical security testbed for networked electric drive systems, aimed at conducting real-world security demonstrations. To our knowledge, this is one of the first security testbeds for networked electric drives, seamlessly integrating the domains of power electronics and computer science, and cybersecurity. By doing so, the testbed offers a comprehensive platform to explore and understand the intricate and often complex interactions between cyber and physical systems. The core of our testbed consists of four electric machine drives, meticulously configured to emulate small-scale but realistic information technology (IT) and operational technology (OT) networks. This setup both provides a controlled environment for simulating a wide array of cyber-attacks, and mirrors potential real-world attack scenarios with a high degree of fidelity. The testbed serves as an invaluable resource for the study of cyber-physical security, offering a practical and dynamic platform for testing and validating cybersecurity measures in the context of networked electric drive systems. As a concrete example of the testbed's capabilities, we have developed and implemented a Python-based script designed to execute step-stone attacks over a wireless local area network (WLAN). This script leverages a sequence of target IP addresses, simulating a real-world attack vector that could be exploited by adversaries. To counteract such threats, we demonstrate the efficacy of our developed cyber-attack detection algorithms, which are integral to our testbed's security framework. Furthermore, the testbed incorporates a real-time visualization system using InfluxDB and Grafana, providing a dynamic and interactive representation of networked electric drives and their associated security monitoring mechanisms. This visualization component not only enhances the testbed's usability but also offers insightful, real-time data for researchers and practitioners, thereby facilitating a deeper understanding of cyber-physical security dynamics in networked electric drive systems.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2024

Experimental Observation of a New Attenuation Mechanism in hcp ‐Metals That May Operate in the Earth's Inner Core

Abstract Seismic observations show the Earth's inner core has significant and unexplained variation in seismic attenuation with position, depth and direction. Interpreting these observations is difficult without knowledge of the visco‐ or anelastic dissipation processes active in iron under inner core conditions. Here, a previously unconsidered attenuation mechanism is observed in zinc, a low pressure analog ofhcp‐iron, during small strain sinusoidal deformation experiments. The experiments were performed in a deformation‐DIA combined with X‐radiography, at seismic frequencies (∼0.003–0.1 Hz), high pressure and temperatures up to ∼80% of melting temperature. Significant dissipation (0.077 ≤ Q −1 (ω) ≤ 0.488) is observed along with frequency dependent softening of zinc's Young's modulus and an extremely small activation energy for creep (⩽7 kJ mol −1 ). In addition, during sinusoidal deformation the original microstructure is replaced by one with a reduced dislocation density and small, uniform, grain size. This combination of behavior collectively reflects a mode of deformation called “internal stress superplasticity”; this deformation mechanism is unique to anisotropic materials and activated by cyclic loading generating large internal stresses. Here we observe a new form of internal stress superplasticity, which we name as “elastic strain mismatch superplasticity.” In it the large stresses are caused by the compressional anisotropy. If this mechanism is also active inhcp‐iron and the Earth's inner‐core it will be a contributor to inner‐core observed seismic attenuation and constrain the maximum inner‐core grain‐size to ≲10 km.

Geochemistry & Geophysics↗