Search NASA⌕ Search

SEARCH · Search NASA

Results for “Small Language Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

61 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Development of an ERT‐Based Framework for Bentonite Buffers Monitoring From Laboratory Tests: 1. Characterizing Thermal–Hydrological–Mechanical Processes

Abstract Bentonite clay is widely used in engineered barrier systems for the permanent disposal of high‐level radioactive waste due to its low permeability, high swelling capacity, and thermal stability. However, the complex thermal‐hydrological‐mechanical (THM) processes induced by heating from decaying radioactive waste and hydration from surrounding rock can lead to heterogeneous changes that are difficult to measure and predict. This study develops an Electrical Resistivity Tomography (ERT)‐based framework for monitoring THM processes, progressing from sample‐scale to bench‐scale tests, to inform field‐scale applications. Sample‐scale tests analyzed small bentonite samples under controlled variations in water content, temperature, and porosity to establish fundamental resistivity relationships. Bench‐scale tests involved larger bentonite columns subjected to heating (up to 200°C) and hydration under controlled pressure, simulating repository conditions. ERT measurements, complemented by X‐ray CT imaging, temperature monitoring, and tracing sensors, revealed coupled THM processes, such as hydration‐induced compression, swelling, and thermal gradients, leading to complex resistivity patterns. The results demonstrate the potential of ERT for capturing THM‐induced resistivity changes, though challenges remain in upscaling and quantitative analysis. This study evaluates laboratory test capabilities and proposes future improvements for understanding THM‐induced resistivity responses. A conceptual framework for ERT implementation in field‐scale monitoring is presented, synthesizing findings from both scales and exploring how ERT data can inform long‐term modeling and reduce prediction uncertainties. Overall, this ERT‐based framework offers a robust method for monitoring bentonite buffers, aiding in early issue detection and supporting the safe long‐term disposal of radioactive waste in geological repositories, while highlighting the need for future development. Plain Language Summary Bentonite clay is crucial in engineered barrier systems (EBS) for containing high‐level radioactive waste due to its ability to absorb water, swell, seal and remain stable under high temperatures. When bentonite absorbs water and heats up from radioactive decay, it experiences complex changes in its physical and mechanical properties. Understanding these changes is important for ensuring the long‐term safety and effectiveness of EBS. This study used Electrical Resistivity Tomography (ERT), a non‐invasive method that measures electrical conductivity to monitor these changes during laboratory experiments. The ERT data revealed significant variations in resistivity corresponding to changes in water content, temperature, and density, providing detailed spatial and temporal insights into the behavior of bentonite. These findings enhance our ability to predict the long‐term performance of bentonite barriers, ensuring the safe containment of radioactive waste. By improving our understanding of bentonite's behavior, this research supports the development of more reliable and effective barrier systems for radioactive waste disposal, protecting the environment and public health. Key Points ERT monitoring was employed to capture resistivity changes in bentonite during controlled heating and hydration experiments, providing insights into THM processes ERT data reveal significant resistivity changes correlated with water content, temperature, and mechanical effects, enhancing the understanding of THM dynamics in bentonite This study explores the potential of the framework for application in field‐scale EBS monitoring, emphasizing the need for integrating additional geophysical methods for comprehensive subsurface imaging

Chen, Hang↗
DOE OSTI2024

Powering Data Centers with Clean Energy: A Techno-Economic Case Study of Nuclear and Renewable Energy Dependability

Rising data demands from artificial intelligence (AI) and large language models (LLMs) generating images, videos, and text have prompted increased need for larger and more robust data centers in the United States. Major companies interested in these larger data centers face the choice of linking them to existing regional grids, building stand-alone power supplies onsite, or a combination of both. The request, review, and approval process for new transmission lines to grids in the United States, however, has grown in recent years to times spans rivaling those of new construction for nuclear power plants. Building an islanded power supply for each data center is therefore becoming a prominent option. In this case study, several technologies are modeled in techno-economic simulations for long-term system costs subject to fixed electricity demand from a singular data center. A 250 MWe data center is assumed with additional 50 MWe for resiliency. Techno-economic simulations are conducted using the Holistic Energy Resource Optimization Network (HERON) software, which is a part of the Framework for Optimization of Resources and Economics (FORCE) tool suite. Technologies considered include solar, wind, lithium-ion batteries, and several types of nuclear reactors: large-scale reactors, small modular reactors, and microreactors. A low- and high-cost estimate for each technology is assumed to develop a range of expected economic performance. Low-cost estimates included several clean energy production tax credits. Different combinations of renewable energy generators with nuclear reactors are considered, ranging from a fully renewable-powered data center to a fully nuclear-powered data center. Historic time series of wind and solar availability from the Texas grid are used to train a reduced order model; this model then generates unique time series with similar characteristics of the training dataset. Multiple scenarios of weather and subsequent operations are simulated for each renewable-nuclear combination to determine total costs throughout the project lifetime. Fully renewable-powered configurations required large amounts of installed capacity (GW scale) in the simulations to meet the fixed demand of the data center. This is due to some scenarios in the historical dataset which captured low-wind and low-solar days, requiring over-building of these technologies as well as batteries to compensate for the low amounts of electricity generation. Fully nuclear-powered configurations outperformed the fully renewable and mixed renewable-nuclear configurations in terms of cost, with ranges between $1B and $10B in 2023 USDs compared to $40B+ for fully renewable configurations. Of the nuclear technologies, small modular reactors performed better economically than large-scale nuclear models due to lower projected capital costs, and both performed better than the microreactor models. These results demonstrate the applicability of firm, dispatchable electricity resources from baseload generators like nuclear power plants for operating facilities that run at constant power without daily variability.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Innovating the next generation of commercial smart building software

Nearly 30% of commercial building energy use is wasted due to equipment faults and HVAC controls problems. The result is increased emissions, compromised comfort and productivity, and less reliable coordination of building power needs with a clean grid. The energy impact alone represents $17 billion in potential savings. Today’s smart building software provides a robust solution to address these operational deficiencies. Energy management and information systems (EMIS) are saving up to 9% on average, with two-year paybacks. They are being incorporated into energy management processes, commissioning services, and utility programs. As effective as they are, two barriers prevent even deeper benefits; limited personnel to fix problems once they are identified, and the expense and time to manually implement changes in control systems. In partnership with the research community, the EMIS industry is developing new capabilities to overcome these barriers. Moving beyond siloed products for either fault detection and diagnostics, or optimal control, these new capabilities empower users to not only automatically identify faults, but also to push corrective action, and control improvements to their buildings. In this paper, several areas for enhancements are documented: ‘one-time’ correction of faults such as setpoints, schedules, and economizer lockouts; short-term active testing for automated proportional integral derivative (PID) loop tuning and functional testing; and continuous supervisory control for demand flexibility and year-round efficiency. Results are presented from a pair of partner implementations out of a dozen providers integrating these enhancements into their products, including field tests from across the country, and insights into operator acceptance and integration into operations and maintenance practices.

Casillas, Armando↗
DOE OSTI2024

Waveguides for neurostimulation in the cochlea

Introduction Optical stimulation has been suggested for neural stimulation to improve cochlear implants. Light allows for more spatially selective activation of neuron populations than electrical current, offering more independent frequency bands along the spiral ganglion. These bands are available to encode acoustic information with anticipated better frequency resolution, improving cochlear implant user performance in noisy listening environments, tonal languages, and music perception. Methods Optical cochlear implants (oCIs) can deliver light either directly via small emitters within the cochlea or via waveguides from external optical sources. We investigated three waveguide designs made from OrmoComp ® , a polymer that cures through ultraviolet (UV) radiation. Waveguides were fabricated via injection molding and coated using dip-coating or thermal reflow, or through aspiration of OrmoComp ® into polyimide tubing that served as the cladding of the waveguide. The choice of fabrication technique directly determined the waveguides' total diameter: thermal reflow yielded ≈940 μm, dip-coating produced ≈306 μm, and aspiration resulted in ≈132 μm core diameter waveguides. Given the human cochlea's small size, we focused on analyzing the 306-μm and 132-μm waveguides, evaluating their optical performance (propagation and bending losses) and mechanical properties (bending stiffness and insertion forces). Furthermore, we evaluated some of these designs in in-vivo guinea pigs experiments. Results For the 100-μm core diameter waveguides, the propagation losses were 12.34 ± 1.26, 1.18 ± 0.88, 1.49 ± 0.58, and 3.43 ± 0.68 dB/cm at 534, 1,375, 1,460, and 1,550 nm, respectively. The respective bending losses at a 2 mm radius of curvature were 5.50 ± 1.32, 0.56 ± 0.26, 0.79 ± 0.18, and 0.64 ± 0.23 dB, and at 1 mm 8.54 ± 1.30, 2.05 ± 0.84, 2.11 ± 0.50, and 1.44 ± 0.37 dB. The bending stiffness of a 1 mm segment of the 100-μm-diameter waveguides was 18.9 ± 2.2 N/m. Insertion forces for the 100-μm-diameter waveguides into an acrylic human-size scala tympani model were < 25 mN. For the waveguides with 306 and 940 μm total diameter, the propagation losses ranged between 0.43 and 2.40 dB/cm at 534, 680, 1,375, and 1,550 nm, between 2.19 and 3.78 dB/cm at 450 and 1,460 nm. Bending losses for 360 degrees at 1,375 nm were 5.0, 2.4, and 0.46 for a bending radius of 2.5-, 3-, and 4-mm. Discussion Our study demonstrated that the polymer OrmoComp ® is suitable for fabricating waveguides to transmit near-infrared radiation. In-vivo experiments showed optically evoked auditory responses originating from optical stimulation in the guinea pigs' first cochlear turn while radiation was delivered. Incoming experiments will focus on evaluating long-term performance of these waveguides in guinea pigs and cats. This study will be designed to provide insights into the waveguides' performance and biocompatibility over extended periods, essential for their potential clinical application in future oCIs.

Kim, Matthew↗
DOE OSTI2020

Development of neural network force fields for corrosion studies

To fully understand the chemistry and physics of corrosion, novel methods of simulation must be developed. One approach is designing machine learning (ML) algorithms integrated with density functional theory to develop adaptive force fields to gain insight into corrosion behavior namely at the surface of metal oxides. Current methods of modeling corrosion are slow due to the computational cost of resolving both reaction mechanics and mass transport processes. Machine learning methods can be implemented to obtain structure-activity relationships at both the molecular and bulk scale while still retaining the accuracy of density functional theory (DFT) and significantly decreasing the time needed for simulations of complex chemical processes in the various environments of corrosion. Multiscale models are needed for corrosion studies to fully understand its processes not only at the atomic length scale (chemical bonding, energies, and forces), but also at the nano and meso length scales (solid-state physics and material science processes). Current methods of study include DFT, molecular dynamics, and Monte Carlo. The limitation of DFT is that only a small number of atoms or molecules can be simulated at that level of theory. Density functional theory is used to study the electronic structure of atoms and molecules, and calculate the force component of each atom. However, these calculations are limited to about 1000 atoms. Custom periodic boundary conditions (PBC) can be used to describe the various environments and defects that affect the atomic forces to produce a large data set from which a training set can be derived. Machine learning can be utilized to overcome the barrier of modeling macroscopic and multi-scale processes from ab initio calculations through the development of adaptive force fields. Local environments determine the atomic forces of a given system, therefore adaptive force fields must be created to produce reliable quantum mechanical calculations. This can be achieved by developing a learning algorithm that uses the mapped atomic forces or fingerprint as an input to produce energies and magnetic moments as output. A systematic approach was used to begin to build a data set in order to accurately describe the atomic forces in various environments. In Figure 4 below, a simple PBC cell of Fe{sub 2}O{sub 3} was first optimized. A surface optimization was performed next, followed by a hydroxylated surface optimization. Once this calculation has converged, the adsorption of halide species to the hydroxylated surface will be investigated. TensorFlow is an open source platform for machine learning developed by Google. Using a high level application program interface (API) such as Keras allows for building and training ML models easily in a number of different environments and languages. For this project, a neural network was developed within Anaconda in Python. Future Work: Further development of reference data set; Refining neural network and learning algorithm; Fingerprinting atomic environment to enable mapping of atomic force components; Choosing appropriate training set from reference data; Learning from training set and enabling non-linear mapping of training set fingerprints and the atomic forces; Estimation of uncertainty to identify ranges of outside applicability; Testing and analysis of molecular dynamic simulations.

36 MATERIALS SCIENCE↗
DOE OSTI2025

CAFE AU LAIT: Compute-Aware Federated Augmented Low-Rank AI Training

Federated finetuning is crucial for unlocking the knowledge embedded in pretrained Large Language Models (LLMs) when data are geographically distributed across clients. Unlike finetuning with data from a single institution, federated finetuning allows collaboration across multiple institutions, enabling the utilization of diverse and decentralized datasets while preserving data privacy. Given the high computing costs of LLM training and the emphasis on energy efficiency in Federated Learning (FL), Low-Rank Adaptation (LoRA) has emerged as a widely adopted algorithm due to its significantly reduced number of trainable parameters. However, this assumes that all data silos have the necessary computing resources to compute local updates of LLMs. Nevertheless, in practice, the computing resources across clients are highly heterogeneous: while some may have access to hundreds of GPUs, others might have limited or no GPU access. Recently, federated finetuning using synthetic data has been proposed, allowing clients to participate in a collaborative training run without training LLMs locally. However, our experimental results reveal a performance gap between models trained using synthetic data and those trained using local updates. Motivated by the observed heterogeneity in computing resources and the performance gap, we propose a novel two-stage algorithm that leverages the storage and computing capabilities of a strong server. In the first stage, under the coordination of the strong server, clients with limited computing resources collaborate to generate synthetic data, which is transferred to and stored on the strong server. In the second stage, the strong server uses this synthetic data on behalf of the resource-constrained clients to perform federated LoRA finetuning alongside clients with sufficient computing resources. This approach ensures that all clients can participate in the finetuning process. Experimental results demonstrate that incorporating local updates from even a small fraction of clients improves performance compared to using synthetic data for all clients. Furthermore, we incorporate the Gaussian mechanism in both stages to guarantee client-level differential privacy.

Wang, Jiayi [ORNL]↗
DOE OSTI2021

Data from: "Warming and provenance limit tree recruitment across and beyond the elevation range of subalpine forest"

This data package contains data used to support conclusions drawn in “Warming and provenance limit tree recruitment across and beyond the elevation range of subalpine forest”, by Kueppers et al. 2017. Data were collected in field sites within the Alpine Treeline Warming Experiment (ATWE), located on Niwot Ridge, on the eastern slope of the Colorado Rocky Mountains, USA. Files containing geospatial data are also included, to provide additional locational context.There are four document formats associated with this archive: three comma-separated values (.csv) files, three Microsoft Excel (.xlsx) files, one .pdf data user’s guide, four keyhole markup language (.kml) files, and a compressed folder containing seven ESRI shapefiles (.shp). The .csv files can be opened using any simple text-editor software, R, or Microsoft Excel. The .xlsx files can only be opened using Microsoft Excel. The .kml file can be opened by Google Earth and Google Maps, and the shapefiles can be opened with any GIS application compatible with the file type, such as ESRI’s ArcGIS, and QGIS.We provide two versions of the seedling data file: “PIEN_PIFLseedlings20150522_20150525rev12222020.csv/.xlsx” (hereafter PIEN_PIFLseedlings2015) and “PIEN_PIFLseedlings20160408rev12222020.csv/.xlsx” (hereafter PIEN_PIFLseedlings2016). PIEN_PIFLseedlings2015 contains the data we used in the paper. PIEN_PIFLseedlings2016 contains an updated version of these data that includes sampling from later years. The main differences between the two files lie in the columns titled “k[YEAR],” which describe the number of seedlings that were killed in a particular year. In PIEN_PIFLseedlings2016, there also is an additional year of data for k2015, and k2014 also has additional data input for the 2014 cohort. Additionally, in years 2010-2014, there are minor differences in the number of seedlings killed -- in as few as 0 plots (in 2011) to as many as 5 plots (in 2014) -- due to errors in data input that were rectified in later years.------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Upslope range shifts by subalpine tree species are a widely anticipated effect of climate change. Climate niche models predict subalpine forests to expand upslope, given more suitable growing conditions for adult trees. However, these models do not take into account climates required for successful seedling recruitment and establishment, an essential element for expansion. Further, localized upper treeline populations are hypothesized to contain favorable traits for colonizing the alpine. To test these expectations and to expand our knowledge of seedling recruitment under climate change, we designed a common garden, climate-warming experiment spread across an elevation gradient at Niwot Ridge in the Colorado Rocky Mountains. We focus on two widespread Western North American species, Engelmann spruce (Picea engelmannii Parry ex. Engelm) and limber pine (Pinus flexilis James), which occur at treeline. While the former is considered a late-seral species more tolerant of shade, limber pine is a shade-intolerant pioneer species able to establish on infertile sites.Every autumn, seeds of the two species were collected from high- (3370 m–3570 m) and low-provenance (2910–3240 m) sources close to the experimental sites and sown in our plots. A subset of plots were heated and another subset watered over the summer months to offset the effects of warming. Across five years, we found that seeds originating from low elevation recruited more strongly for both species, although this provenance difference diminished by the fourth year for Engelmann spruce, likely due to small sample sizes. Despite the recruitment of low-provenance seed, warming treatments decreased recruitment at all elevations. Combining this with the likeliness and availability of lower-quality, high provenance seed moving upslope at the treeline, tree migration into the alpine may be slowed. Overall, our findings suggest that the hardier limber pine is likely to become a more significant species in subalpine forest communities in the future, while the more sensitive Engelmann spruce may experience range contraction.

54 ENVIRONMENTAL SCIENCES↗