Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solar coronal heating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Role of Small-Scale Impulsive Events in Heating the X-Ray Bright Points of the Quiet Sun

Small-scale impulsive events, known as nanoflares, are thought to be one of the prime candidates that can keep the solar corona hot at its multimillion-Kelvin temperature. Individual nanoflares are difficult to detect with the current generation of instruments; however, their presence can be inferred through indirect techniques such as Differential Emission Measure (DEM) analysis. Here, we employ this technique to investigate the possibility of nanoflare heating of the quiet corona during the minimum of solar cycle 24. We estimate the DEM of disk-integrated quiet Sun and X-ray bright points (XBP) using the observations from XSM on board the Chandrayaan-2 orbiter and AIA on board the Solar Dynamic Observatory. XBPs are found to be the dominant contributor to disk-integrated X-rays, with a radiative flux of ∼2 × 10 5 erg cm −2 s −1 . XBPs consist of small-scale loops associated with bipolar magnetic fields. We simulate such XBP loops using the EBTEL hydrodynamic code. The lengths and magnetic field strengths of these loops are obtained through a potential field extrapolation of the photospheric magnetogram. Each loop is assumed to be heated by random nanoflares having an energy that depends on the loop properties. The composite nanoflare energy distribution for all the loops has a power-law slope close to −2.5. The simulation output is then used to obtain the integrated DEM. It agrees remarkably well with the observed DEM at temperatures above 1 MK, suggesting that the nanoflare distribution, as predicted by our model, can explain the XBP heating.

Solar coronal heating↗

Cross-Scale Coupling in the Solar Atmosphere

For understanding and eventually predicting solar activity, the fundamental question that Solar-C must answer is: How does energy transfer from the large-scales at which it is injected into the solar atmosphere to the small scales at which it is dissipated? We show that this question of cross-scale coupling is fundamental to all activity, ranging from the smallest nanoflares that are postulated to power coronal heating and solar wind acceleration, to the largest coronal mass ejections and eruptive flares. For the solar atmosphere, the most important process that actually dissipates the energy is believed to be magnetic reconnection. We present results on recent calculations of reconnection in a variety of solar contexts and focus on the coupling between kinetic and MHD scales during reconnection. We discuss the implications of our results for present data and for future observations from Solar-C.

Antiochos, Spiro K.↗

Mapping the Solar Wind from its Source Region into the Outer Corona

Knowledge of the radial variation of the plasma conditions in the coronal source region of the solar wind is essential to exploring coronal heating and solar wind acceleration mechanisms. The goal of the proposal was to determine as many plasma parameters in the solar wind acceleration region and beyond as possible by coordinating different observational techniques, such as Interplanetary Scintillation Observations, spectral line intensity observations, polarization brightness measurements and X-ray observations. The inferred plasma parameters were then used to constrain solar wind models.

Esser, Ruth↗

Mapping the Solar Wind from its Source Region into the Outer Corona

Knowledge of the radial variation of the plasma conditions in the coronal source region of the solar wind is essential to exploring coronal heating and solar wind acceleration mechanisms. The goal of the present proposal is to determine as many plasma parameters in that region as possible by coordinating different observational techniques, such as Interplanetary Scintillation Observations, spectral line intensity observations, polarization brightness measurements and X-ray observations. The inferred plasma parameters are then used to constrain solar wind models.

Esser, Ruth↗

The FIELDS Instrument Suite for Solar Probe Plus Measuring the Coronal Plasma and Magnetic Field, Plasma Waves and Turbulence, and Radio Signatures of Solar Transients

NASA's Solar Probe Plus (SPP) mission will make the first in situ measurements of the solar corona and the birthplace of the solar wind. The FIELDS instrument suite on SPP will make direct measurements of electric and magnetic fields, the properties of in situ plasma waves, electron density and temperature profiles, and interplanetary radio emissions, amongst other things. Here, we describe the scientific objectives targeted by the SPP/FIELDS instrument, the instrument design itself, and the instrument concept of operations and planned data products.

Solar Probe Plus↗

On the relation between coronal heating, flux tube divergence, and the solar wind proton flux and flow speed

A one-fluid solar wind model is used to investigate some relations between coronal heating, the flux tube divergence near the Sun, and the solar wind proton flux and flow speed. The effects of energy addition to the supersonic region of the flow are also studied. We allow for a mechanical energy flux that heats the corona, and an Alfven wave energy flux that adds energy, mainly to the supersonic flow, both as momentum and as heat. We find that the mechanical energy flux determines the solar wind mass flux, and in order to keep an almost constant proton flux at the orbit of Earth with changing flow geometry, that the mechanical energy flux must vary linearly with the magnetic field in the inner corona. This thermally driven wind generally has a low asymptotic flow speed. When Alfven waves are added to the thermally driven flow, the asymptotic flow speed is increased and is determined by the ratio of the Alfven wave and the mechanical energy fluxes at the coronal base. Flow speeds characteristic of recurrent high-speed solar wind streams can be obtained only when the Alfven wave energy flux, deposited in the supersonic flow, is larger than the mechanical energy flux heating the corona.

Sandbaek, Onulf↗

Extreme-Ultraviolet Spectroscopic Observation of Direct Coronal Heating During a C-Class Solar Flare

With the Coronal Diagnostic Spectrometer operating in rapid cadence (9.8 s) stare mode during a C6.6 flare on the solar disk, we observed a sudden brightening of Fe xix line emission (formed at temperature T ≈ 8 MK) above the pre-flare noise without a corresponding brightening of emission from ions formed at lower temperatures, including He i (0.01 MK), Ov (0.25 MK), and Si xii (2 MK). The sudden brightening persisted as a plateau of Fe xix intensity that endured more than 11 minutes. The Fe xix emission at the rise and during the life of the plateau showed no evidence of significant bulk velocity flows, and hence cannot be attributed to chromospheric evaporation. However, the line width showed a significant broadening at the rise of the plateau, corresponding to nonthermal velocities of at least 89 km s−1 due to reconnection outflows or turbulence. During the plateau He i, Ov, and Si xii brightened at successively later times starting about 3.5 minutes after Fe xix, which suggests that these brightenings were produced by thermal conduction from the plasma that produced the Fe xix line emission; however, we cannot rule out the possibility that they were produced by a weak beam of nonthermal particles. We interpret an observed shortening of the Ov wavelength for about 1.5 minutes toward the middle of the plateau to indicate new upward motions driven by the flare, as occurs during gentle chromospheric evaporation; relative to a quiescent interval shortly before the flare, the Ov upward velocity was around −10 km s−1.

Activity↗

The solar wind cycle, the sunspot cycle, and the corona.

Recent theories of the solar cycle and of coronal heating strongly suggest that solar cycle variations of different quantities (i.e., sunspots, coronal green line, etc.) ought not to be expected to be in phase with one another. In agreement with this notion it is noted that the shape of the corona typical of a 'maximum' eclipse occurs 1.5 yr before sunspot maximum, compared with 2 yr as might be expected from Leighton's 'standard' model. Further, it is argued that the phase of the solar wind cycle can be determined from geomagnetic observations. Using this phase, a solar cycle variation of 100 km/sec in the solar wind velocity and 1 gamma in the magnetic field intensity becomes apparent. In general, the solar wind cycle lags behind the coronal-eclipse-form cycle by 3 yr, compared with the 2 yr that might be expected from model calculations.

Hirshberg, J.↗

Spectroscopic diagnostics of extended corona and solar wind with UVCS/Spartan

The primary goal of the Ultraviolet Coronal Spectrometer on Spartan 201 (UVCS/Spartan) is to make spectroscopic diagnostic measurements that can be used to derive plasma parameters in the extended solar corona where it is believed that significant heating of the corona and acceleration of the solar wind take place. Direct and indirect measurements of particle velocity distribution, thermal and non-thermal temperatures, and bulk outflow velocities are crucial to aid in the identification of physical processes that may be responsible for coronal heating and solar wind acceleration. UVCS/Spartan has made two flights in April 1993 and September 1994, the latter coinciding with the South Polar Passage of the Ulysses spacecraft. Observations were made of the large-scale structures and sub-structures of coronal holes and streamers at heliocentric heights between 1.5 solar radii and 3.5 solar radii. Measurements were made of H I Lyman-alpha intensities and profiles, and line intensities of minor ions like O(5+) and Fe(11+). We will present results from the flights and discuss how these measurements are used to constrain values for the proton thermal and non-thermal kinetic temperatures, proton bulk outflow velocities, and minor ion temperatures and bulk outflow velocities. Plans for the upcoming flight in July 1995 will also be discussed.

Strachan, L.↗

Coronal Heating as Determined by the Solar Flare Frequency Distribution Obtained by Aggregating Case Studies

Flare frequency distributions represent a key approach to addressing one of the largest problems in solar and stellar physics: determining the mechanism that counterintuitively heats coronae to temperatures that are orders of magnitude hotter than the corresponding photospheres. It is widely accepted that the magnetic field is responsible for the heating, but there are two competing mechanisms that could explain it: nanoflares or Alfvén waves. To date, neither can be directly observed. Nanoflares are, by definition, extremely small, but their aggregate energy release could represent a substantial heating mechanism, presuming they are sufficiently abundant. One way to test this presumption is via the flare frequency distribution, which describes how often flares of various energies occur. If the slope of the power law fitting the flare frequency distribution is above a critical threshold, α = 2 as established in prior literature, then there should be a sufficient abundance of nanoflares to explain coronal heating. We performed >600 case studies of solar flares, made possible by an unprecedented number of data analysts via three semesters of an undergraduate physics laboratory course. This allowed us to include two crucial, but nontrivial, analysis methods: preflare baseline subtraction and computation of the flare energy, which requires determining flare start and stop times. We aggregated the results of these analyses into a statistical study to determine that α = 1.63 ± 0.03. This is below the critical threshold, suggesting that Alfvén waves are an important driver of coronal heating.

Astrostatistics distributions↗

The distribution of flare parameters and implications for coronal heating

Assuming that solar hard X-ray flares are caused by bremsstrahlung from a distribution of accelerated electrons impinging on a thick target, we determine the relationship between the total flare energy released in the corona and observable flare parameters. It is shown that for the more numerous smaller flares to be energetically more important than larger ones, there must be an anticorrelation between observed flux and one or more of the photon spectral index, the total flare duration, the ratio of the total energy that goes into heating the corona to the energy that goes into acceleration of electrons, and the reciprocal of the low-energy cutoff of the accelerated electron spectrum. Using a new statistical test which properly takes account of data truncation due to observational selection effects, we find that neither spectral index nor duration show an anticorrelation with flux in ISEE 3/ICE hard X-ray data. Using a nonparametric method, we obtain single distributions of peak flux, spectral index, duration, and fluence, corrected for selection biases. The functional forms of these distributions do not support coronal heating by numerous small flares without very specific behavior by yet unobserved parameters.

Lee, Theodore T.↗

Deciphering the Birth Region, Formation, and Evolution of Ambient and Transient Solar Wind Using Heavy Ion Observations

This paper outlines key scientific topics that are important for the development of solar system physics and how observations of heavy ion composition can address them. The key objectives include, 1) understanding the Sun’s chemical composition by identifying specific mechanisms driving elemental variation in the corona. 2) Disentangling the solar wind birthplace and drivers of release by determining the relative contributions of active regions (ARs), quiet Sun, and coronal hole plasma to the solar wind. 3) Determining the principal mechanisms driving solar wind evolution from the Sun by identifying the importance and interplay of reconnection, waves, and/or turbulence in driving the extended acceleration and heating of solar wind and transient plasma. The paper recommends complementary heavy ion measurements that can be traced from the Sun to the heliosphere to properly connect and study these regions to address these topics. The careful determination of heavy ion and elemental composition of several particle populations, matched at the Sun and in the heliosphere, will permit for a comprehensive examination of fractionation processes, wave-particle interactions, coronal heating, and solar wind release and energization that are key to understanding how the Sun forms and influences the heliosphere.

chemical composition↗

Solar transition region and coronal response to heating rate perturbations

Observations of Doppler shifts in UV emission lines formed in the solar transition region show continual plasma downflows and impulsive plasma upflows. Using numerical simulations, the authors examine the conjecture that areas of downflowing plasma are the base regions of coronal loops in which the heating is gradually decreasing and that areas of upflowing plasma are the base regions of coronal loops in which the heating rate is gradually increasing. Beginning with a coronal loop in equilibrium, the heating rate is reduced on time scales of 100, 1000, and 2000 s to 10 percent and 1 percent of the initial value, and the loop is allowed to evolve to a new equilibrium. The heating rate for the cooled models is then increased back to the initial value on the same time scales. While significant mass motions do develop in the simulations, both the emission measure and the velocity at 100,000 K do not show the characteristics present in UV observations.

Mariska, John T.↗

The Paradox of Filamented Coronal Hole Flow but Uniform High Speed Wind

Plumes and rays in coronal holes are nearly radially aligned density striations that follow the ambient magnetic field. They have long been known, but have gained new interest with growing awareness that coronal hole flow is inherently filamentary. In retrospect, filamentary flow should have been no surprise. This is because,Beta much less than 1 in coronal holes inside approximately 10 Solar radius, allowing the flow to be filamentary down to the smallest scale of photospheric magnetic activity. While the magnetic field itself is locally smooth across any height above ca. 50,000 km, SOHO/MDI has shown that the photospheric magnetic field is a complex array of rapidly evolving small bipoles that are constantly emerging, evolving, and cancelling. The resulting activity is manifested in microflares, concentrated in the magnetic network, that produce Impulsive injections at the footpoints of coronal field lines. The uneven distribution of this activity in space and time is the source of coronal hole filamentation. What is surprising is that the radial flow speed also exhibits filamentary structure. It is not well described as smooth, spherically symmetric, diverging flow, but instead ranges from 300 to over 1000 km/s at 5.5 Solar radius among field-aligned filaments like those seen in plumes and rays [Feldman et al., JGR, Dec. 1997]. This is completely unlike the constant high speed solar wind reported beyond 0.3 AU. Consequently, plumes and filamentary structure must be strongly mixed, and the mixing must be far along by 0.3 AU to be consistent with Helios observations. The paradox is what causes the mixing? Existing models of coronal heating and solar wind acceleration hardly address this issue. One possibility we are investigating is the MHD Kelvin-Helmholtz instability, to which the shear between plumes and interplume corona is expected to become unstable at 5-10 Solar radius. This instability can be simulated and followed far into the nonlinear regime and may lead to Alfvenic fluctuations like those seen at 1 AU.

Suess, Steven T.↗

Episodic coronal heating

A study is made of the observational consequences of the hypothesis that there is no steady coronal heating, the solar corona instead being heated episodically, such that each short burst of heating is followed by a long period of radiative cooling. The form of the resulting contribution to the differential emission measure (DEM), and to a convenient related function (the differential energy flux, DEF) is calculated. Observational data for the quiet solar atmosphere indicate that the upper branch of the DEM, corresponding to temperatures above 100,000 K, can be interpreted in terms of episodic energy injection at coronal temperatures.

Sturrock, P. A.↗

Solar Wind Acceleration from the Upper Chromosphere to the Corona in Coronal Hole Regions

Flow speeds derived in recent years from chromospheric/transition region and coronal observations suggest that the solar wind acceleration process might start at heights in the solar atmosphere much lower than previously imagined. The goal of the proposed investigation was to study atmospheric outflows in coronal hole regions from the chromosphere into the corona using observational and theoretical approaches. In addition to outflows, other plasma properties such as electron densities, and electron and ion temperatures were also included in the study. To investigate these plasma properties in the inner corona is important as they play a crucial role in placing limits on possible coronal heating and solar wind acceleration mechanisms.

Esser, Ruth↗

Ultra-fine-scale filamentary structures in the Outer Corona and the Solar Magnetic Field

Filamentary structures following magnetic field lines pervade the Sun's atmosphere and offer us insight into the solar magnetic field. Radio propagation measurements have shown that the smallest filamentary structures in the solar corona are more than 2 orders of magnitude finer than those seen in solar imaging. Here we use radio Doppler measurements to characterize their transverse density gradient and determine their finest scale in the outer corona at 20-30 R(circled dot operator), where open magnetic fields prevail. Filamentary structures overly active regions have the steepest gradient and finest scale, while those overlying coronal holes have the shallowest gradient and least finest scale. Their organization by the underlying corona implies that these subresolution structures extend radially from the entire Sun, confirming that they trace the coronal magnetic field responsible for the radial expansion of the solar wind. That they are rooted all over the Sun elucidates the association between the magnetic field of the photosphere and that of the corona, as revealed by the similarity between the power spectra of the photospheric field and the coronal density fluctuations. This association along with the persistence of filamentary structures far from the Sun demonstrate that subresolution magnetic fields must play an important role not only in magnetic coupling of the photosphere and corona, but also in coronal heating and solar wind acceleration through the process of small-scale magnetic reconnection. They also explain why current widely used theoretical models that extrapolate photospheric magnetic fields into the corona do not predict the correct source of the solar wind.

Sun : Corona↗