Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solvent Free”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Au/SiO{sub x} composite thin film as catalyst for solvent-free hydrocarbon oxidation

Graphical abstract: Au/SiO{sub x} composite thin film possesses high catalytic activity and stability for selective oxidation of cis-cyclooctene. - Highlights: • Au/SiO{sub x} composite thin film was synthesized by a facile and efficient chemical approach. • The Au/SiO{sub x} composite thin film exhibits high catalytic ability for the selective oxidation. • The Au/SiO{sub x} composite thin film possesses high structural and catalytic stability. - Abstract: We report a facile and efficient chemical approach for the controllable preparation of Au/SiO{sub x} composite thin film using silicon quantum dots as SiO{sub x} sources. Au/SiO{sub x} composite thin film exhibits high catalytic activity (65.04% conversion based on cis-cyclooctene and 78.34% selectivity for 2-hydroxycyclooctanone) and stability for selective oxidation of cis-cyclooctene in the absence of solvent using TBHP as radical initiator and oxygen (in the air) as oxidant at 80 °C.

36 MATERIALS SCIENCE↗

Elastomeric Nanocomposite with Solvent‐Free, One Step, In Situ Shear Exfoliation of Graphite to Graphene

A graphene nanoflake (GNF)‐enhanced elastomeric nanocomposite (G‐EMC) is fabricated following an innovative, cost‐effective, single‐step, in situ shear exfoliation (ISE) method from low‐cost bulk material, graphite, where uniform mixing happens simultaneously within the elastomer matrix. Electron microscopy, atomic force microscopy, and photo‐induced force microscopy results show good dispersion of GNFs with exfoliation to a few layers and uniform distribution in the elastomer matrix. X‐ray photoelectron spectroscopy analysis shows less than 1% oxygen‐containing functional groups/impurity, enhanced bonding through the formation of edge sites as fracture occurs across the GNF basal plane, and pi‐pi interactions with newly exfoliated planar basal plane surfaces of the GNFs. Raman spectroscopy results confirm the formation of GNFs with only a few layers of graphene formed by the ISE process. Fabricated 10 wt.% G‐EMC nanocomposites show a 400%–500% increase in strength and fracture toughness. And 35 wt.% G‐EMCs provide an electrical conductivity of 25.64 S m −1 and a sensor gauge factor of 45. The resulting intrinsic piezo resistivity of the fabricated nanocomposite has been exploited to fabricate a multi‐functional wired and wireless sensor for detecting different body movements, speech, human vital functions, solvents, and biomolecules.

36 MATERIALS SCIENCE↗

Solvent free tin oxide nanoparticle for gas sensing application

A new modified technique of synthesizing tin oxide nanoparticles with crystallite size of 2 nm to 6 nm has been developed. Surface area of the nanoparticle has been increased as we approached towards the Debye length. Such a techniques for approaching the Debye length is expected to bring remarkable changes in the properties of resistive based gas sensors. The technique used here is less toxic, economical and has high yield. Phase purity, size, shape and composition has been investigated using x-ray diffraction, micro Raman, scanning electron microscopy and energy dispersive x ray spectroscopy. While surface area has been calculated through Brunaur-Emmett-Teller (BET).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Hybrid Chemo-Mechanical Plastics Recycling: Solvent-free, High-speed Reactive Extrusion of Low-Density Polyethylene

Low-Density Polyethylene (LDPE) is ubiquitous in the packaging industry due to its flexibility, toughness, and low cost. However, it is typically contaminated with other materials, seriously limiting options for mechanical recycling. Interest in chemical recycling techniques such as pyrolysis and hydrothermal liquefaction is growing, but most of these processes face technoeconomic challenges that have limited commercial deployment. We present a hybrid chemo-mechanical approach using reactive twin-screw extrusion (TSE) for tailoring the molecular weight and chain structure of reclaimed LDPE. Two types of zeolite catalysts at several loading levels were evaluated over a range of processing conditions. Structural, thermal, and rheological properties of the extruded samples were investigated and compared to virgin LDPE and LDPE extruded without the catalyst. A nuclear magnetic resonance spectroscopic technique was used to investigate changes in the structure of the polymer. LDPE extruded with microporous y-zeolite showed lower degradation temperature and increased short chain branching. Mesoporous MCM-41 also induced increased branching but had no effect on degradation temperature. The theoretical mechanical energy input for the chemical modification was calculated using process modeling. The demonstrated hybrid reactive extrusion process provides a potential low-cost, simple approach for repurposing LDPE-based flexible packaging as coatings and adhesives.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solvent-free and mechanochemical synthesis of N-doped mesoporous carbon from tannin and related gas sorption property

The commercialization of nitrogen-doped mesoporous carbons (N-doped MCs) is highly pursued by chemical engineers. This paper focuses on the clean and simple synthesis of N-doped MCs via mechanochemistry and their applications in gas sorption. Here, biomass tannin as the carbon precursor together with various natural nitrogen sources was assembled with F127 by ball milling in solid-state, and then directly carbonized into N-doped MCs with tunable nitrogen contents (up to 9.7 wt%), high surface area (up to 707 m 2 g -1 ), large pore size (~8 nm), narrow pore size distribution and high pore volume (up to 0.78 cm 3 g -1 ). The CO 2 /N 2 and C 2 /C 3 light hydrocarbon static adsorption experiments by N-doped MCs showed a higher CO 2 adsorption capacity and a better adsorption selectivity, in comparison to the control sample without nitrogen species. The IAST separation selectivity of CO 2 /N 2 (15:85, v/v) could be about 30, meanwhile the preferred selectivity for gas molecules of alkyne was also observed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solvent-free mechanochemical synthesis and magnetic properties of rare-earth based metal-organic frameworks

Mechanical milling of benzene 1,3,5-tricarboxylic acid [C 6 H 3 (COOH) 3 ], both with the single and mixed rare earth carbonates [R 2 (CO 3 ) 3 ·xH 2 O; R = Gd, Tb and Dy], leads to the formation of metal-organic frameworks [R{C 6 H 3 (COO) 3 }] that adopt MIL-78 type structure. M(T) data of the investigated MOFs do not show any apparent onset of long range magnetic ordering down to 2 K. The M(H) data for Gd{C 6 H 3 (COO) 3 }collected at 2 K show deviations from the magnetization behavior expected for non-interacting Gd 3+ ions. For the Gd based MOF the temperature dependence of the isothermal magnetic entropy change (i.e. magnetocaloric effect, ΔS M ) exhibits a monotonous increase with decreasing temperature and at T = 3.5 K it reaches 34.1 J kg $-$1 K $-$1 for a field change (ΔH) of 50 kOe. Finally, for the same ΔH the maximum values of ΔS M for R = Tb and Dy are 5.5 J kg $-$1 K $-$1 and 8.5 J kg $-$1 K $-$1 at 9.5 K and 4.5 K, respectively.

36 MATERIALS SCIENCE↗

Pd-porphyrin functionalized ionic liquid-modified mesoporous SBA-15: An efficient and recyclable catalyst for solvent-free Heck reaction

The Pd-porphyrin functionalized ionic liquid could be covalently anchored in the channels of mesoporous SBA-15 through ion-pair electrostatic interaction between imidazolium-cationic and Pd-porphyrin-anionic moieties. Such modified SBA-15 materials were prepared successfully via a post-synthesis (surface sol-gel polymerization) or a one-pot sol-gel procedure, which were characterized by powder X-ray diffraction, UV-visible spectroscopy, Fourier transform infrared spectroscopy, N{sub 2} sorption, elemental analysis, and transmission electron microscopy. The modified SBA-15 materials are efficient and recyclable catalysts for cross-coupling of aryl iodides or activated aryl bromides with ethyl acrylate without activity loss and Pd leaching even after 9 runs.

36 MATERIALS SCIENCE↗

Facile Solvent-Free Synthesis of Manganese Nickel-Layered Double Hydroxide for Sustainable Water-Splitting Applications

The quest for efficient and sustainable water-splitting electrocatalysts has led to the development of a novel bifunctional material, manganese nickel-layered double hydroxide (MnNi-LDH), which demonstrates promising performance for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Although manganese-based materials are less explored than other transition metals, they offer significant potential owing to their widespread availability, affordability, and customizable electronic characteristics. MnNi-LDH exhibits a nanosheet morphology and a layered structure, which collectively provide numerous accessible active sites and facilitate efficient charge transfer and mass transport. Characterization using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy, and transmission electron microscopy reveals the structural and compositional properties of MnNi-LDH. The oxidation states of Mn and Ni, as determined by XPS, play a crucial role in improving the catalytic activity. Notably, MnNi-LDH demonstrates low overpotentials of 187 mV for OER and 225 mV for HER at 10 mA/cm 2 current density comparable to conventional catalysts. Long-term stability tests show minimal degradation in cell performance over 50 h, with a current density drop of only 0.6153% per hour for the OER and 0.37% per hour for the HER. Further, these findings highlight the potential of MnNi-LDH as a promising and environmentally friendly bifunctional electrocatalyst for water splitting, contributing to the advancement of renewable energy sources.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Uranium Removal from Seawater by Means of Polyamide 6 Fibers Directly Grafted with Diallyl Oxalate through a Single-Step, Solvent-Free Irradiation Process

In order to test the effectiveness of oxalate-based polymeric adsorbents in the recovery of uranium from seawater, diallyl oxalate (DAOx) was grafted onto nylon 6 fabrics by exposing the fabric, immersed in pure liquid DAOx or in a surfactant-stabilized dispersion of DAOx in water, to electron beam or gamma radiation. Following drying and weighing to determine the degree of grafting (DoG), the presence of oxalate in the fabrics was verified using XPS. Zeta potential measurements showed the fabric surfaces to be negatively charged. The fabrics were tested by rotating them for 7 days in a rotary agitator with actual seawater spiked with 0.2 or 1.0 mg∙L -1 uranium. The fraction of uranium in the solution which was removed due to uptake on the fabrics was found to rise with increasing DoG at both uranium concentrations. EDS measurements were used to map the distribution of adsorbed uranium on the polymeric fibers.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗