Search NASA⌕ Search

SEARCH · Search NASA

Results for “Spikes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Tailorable Doping-Spike PtSi Infrared Detectors Fabricated by Si Molecular Beam Epitaxy

By incorporating a 1-nm-thick p+ doping spike at the PtSi/Si interface, we have successfullydemonstrated extended cutoff wavelengths of PtSi Schottky infrared detectors. The extended cutoffwavelengths resulted from the reduced effective potential barriers due to the combined effects of anincreased electric field near the silicide/Si interface and the Schottky image force. The p+ dopingspikes were grown by molecular beam epitaxy at 450 degrees C using elemental boron as the dopantsource, with doping concentrations ranging from 5 x 10^(19) to 2 x 10^(20) cm^(-3). The cutoffwavelengths were shown to increase with increasing doping concentrations of the p+ spikes. Thermionic emission dark current characteristics were observed and photoresponse in the LWIRregime was demonstrated. Furthermore, the effective potential barriers determined by the Richardsonplots were used to study the electrically activated boron dopant concentrations of the thin (1-nm-thick) spikes.

del Castillo, H. M.↗

Experimental Demonstration of a Supersonic Spike Ejector

Spike diffusers are presented as a means to improve supersonic ejector efficiency via reduction in shock losses. Design, fabrication, and testing of an articulated prototype is described. Experimental results are compared to empirical performance curves representing the loci of optimal one- and two-stage conventional ejectors driven by dry air and discharging to atmosphere. Operated at a compression ratio of ~10 with all inputs equal, the spike ejector is shown to have achieved up to 2.19X and 1.83X the secondary mass throughput of the one- and two-stage references, respectively. This suggests the potential of spike diffusers to reduce ejector operating costs by ~50%.

wind tunnel↗

Surface spikes - A perturbation of growth steps.

During the growth of NiBr 2 crystals by sublimation, it has been observed that in addition to the mechanism of growth spirals a secondary mode of nucleation can occur. This is an accelerated growth which appears in the form of surface spikes on growth steps. The surface spikes may move as much as 50 times faster than the unperturbed growth steps. The mechanism of formation is believed to begin with the nucleation of a liquid droplet which wets the growth step and produces the accelerated growth from the liquid phase. The growth occurs at 500°C below the melting point of NiBr 2 . It is believed that the nucleation of the liquid phase at these temperatures is impurity controlled.

Nickel compound↗

Saturation current spikes eliminated in saturable core transformers

Unsaturating composite magnetic core transformer, consisting of two separate parallel cores designed so impending core saturation causes signal generation, terminates high current spike in converter primary circuit. Simplified waveform, demonstrates transformer effectiveness in eliminating current spikes.

Schwarz, F. C.↗

Aerodynamic spike nozzle Patent

Constructing fluid spike nozzle to eliminate heat transfer and high temperature problems inherent in physical spikes

Cowell, T. E.↗

High energy electron spikes at high latitudes

Over 750 spikes of precipitating electrons with E or = 425 KeV were observed aboard the low altitude polar orbiter OGO-D between 30 July 1967 and 31 December 1967. The spikes may be divided into three distinct populations, depending on whether they occur at latitudes below, at, or above the local limit of trapping.

Brown, J. W.↗

Flow oscillations of spike-tipped bodies

The oscillating flow field around a spike-tipped body has been simulated by the numerical solution of the 3-D compressible Navier-Stokes equations at a Mach number of 3.0 and a nominal Reynolds number of 7.87 x 10 to the 6th/m. Computations were performed using a vectorized 3-D Navier-Stokes program on the STAR 100 computer. Numerical solutions confirmed the experimental result that the self-sustained oscillation occurs within a limited range of the protruded spike length to shoulder height ratio. The numerical result predicted correctly the discrete frequency range as well as the rms pressure intensity. The detailed flow structure is also presented and discussed.

Shang, J. S.↗

Spike-Free Automatic Level Control

New automatic-level-control circuit protects against signal "overshoot." Zener diodes and series capacitors prevent voltage spikes (caused by sudden increase in input level) from appearing at output. When spike voltage drops below breakdown voltage of Zener diodes, they turn off. Initial output level is determined by Zener breakdown voltage and capacitance of series capacitor.

Toole, P. C.↗

Elimination of current spikes in buck power converters

Current spikes in a buck power converter due to commutating diode turn-off time are eliminated by using a tapped inductor in the converter with the tap connected to the switching transistor. The commutating diode is not in the usual place, but is instead connected to conduct current from one end of the tapped inductor remote from the load during the interval in which the transistor is not conducting. In the case of a converter having a center-tapped (primary and secondary) transformer between two switching power transistors operated in a push-pull mode and two rectifying diodes in the secondary circuit, current spikes due to transformer saturation are also eliminated by using a tapped inductor in the converter with the tap connected to the rectifying diodes and a diode connected to conduct current from one end of the tapped inductor remote from the load during the interval in which the transistors are not conducting.

Mclyman, W. T.↗

VLA observations of positions 42 6 centimeter burst peaks associated with hard X-ray burst spikes

Using the Very Large Array with a spatial resolution of 3 arcsec, two-dimensional, 10-second synthesis maps are produced of four 6-cm lambda bursts associated with multiply spiked hard X-ray bursts (20-300 keV). The positional, structural, and polarization characteristics are investigated. It is noted that three of the four burst sources are rather compact (less than approximately 10 arcsec). It is found that the positions of the individual peaks or spikes within a single burst are the same within plus or minus 2 arcsec. Interpreting these different peaks as separate electron acceleration events, the results suggest repeated acceleration of electrons within the same magnetic trap. The trap situation is found to be consistent with the bipolar nature of the burst sources except in one case.

Kundu, M. R.↗

Evidence for inhomogeneous thermal sources of two similar solar spike event of 1978, May 5 and December 4

Two short duration single spike events of 1978 May 5 and December 4 exhibit similar time profiles in the microwave and hard X-ray ranges, indicating emission from compact sources. Microwave spectral observations exhibit inhomogeneities present in the source parameters. The existence of fine time structures in the microwave time profiles at 10.4 GHz from Berne are interpreted as a signature of the dynamics of a disturbance travelling through the souce at the ion-sound speed. Stereoscopic observations with the hard X-ray detector on the solar orbiter, Helios-2, and the Berne microwave antennae do not indicate any time lag or differences in the time profiles during the impulsive phase. This is taken as evidence for the absence of directionality of emission making beam models unlikely for short duration single spike events.

Wiehl, H. J.↗

Some recent results in the interpretation of high brightness temperature microwave spike emission

A review is presented of theoretical work on the interpretation of short duration (1-100 msec), high brightness temperature (approximately 10 to the 15th K) spikes at microwave frequencies during the impulsive phase of some solar flares. Also examined is recent work on the interpretation of the spike emission as gyrosynchrotron masering. Two alternative radiation mechanisms, stimulated plasma emission from the coherent interaction of electrostatic upper hybrid waves and from the interaction of electron plasma waves, are examined.

Holman, G. D.↗

Evidence for inhomogeneous thermal sources of two similar solar spike events of 1978 May 5 and December 4

Two short duration single spike solar events of 1978 May 5 and December 4 exhibit similar time profiles in the microwave and hard X-ray ranges, indicating emission from compact sources. Microwave spectral observations exhibit inhomogeneities present in the source parameters. The existence of fine time structures in the microwave time profiles at 10.4 GHz from Berne are interpreted as a signature of the dynamics of a disturbance traveling through the source at the ion-sound speed. Stereoscopic observations with the hard X-ray detector on the solar orbiter, Helios-2, and the Berne microwave antenna do not indicate any time lag or differences in the time profiles during the impulsive phase. This is taken as evidence for the absence of directionality of emission making beam models unlikely for short duration single spike events. Previously announced in STAR as N83-13047

Desai, U.↗

Velocity spike at the poleward edge of the auroral zone

Data from coordinated observations of the Chatanika incoherent scatter radar and the Atmosphere Explorer C satellite are examined to study the poleward edge of the auroral zone for one pass in the morning sector. A very intense, spikelike electric field is seen at the boundary between the auroral zone and the polar cap, coincident with the convection reversal. The particle detector data are consistent with the presence of a pair of oppositely oriented potential drops parallel to the magnetic field. These potential drops are of a few hundred electron volts, and their direction is such that the precipitating electrons are accelerated on the poleward side and decelerated on the equatorward side of the electric field spike. These observations are examined in the light of recent theoretical investigations that have shown that parallel acceleration can indeed be expected to occur in the regions of large velocity shear. The Chatanika data suggest that such spikes may occur repeatedly at the poleward edge of the diffuse aurora, but that they are confined in either time or space.

De La Beaujardiere, O.↗

Electron-cyclotron maser and solar microwave millisecond spike emission

An intense solar microwave millisecond spike emission (SMMSE) event was observed on May 16, 1981 by Zhao and Jin at Beijing Observatory. The peak flux density of the spikes is high to 5 x 100,000 s.f.u. and the corresponding brightness temperature (BT) reaches approx. 10 to the 15th K. In order to explain the observed properties of SMMSE, it is proposed that a beam of electrons with energy of tens KeV injected from the acceleration region downwards into an emerging magnetic arch forms so-called hollow beam distribution and causes electron-cyclotron maser (ECM) instability. The growth rate of second harmonic X-mode is calculated and its change with time is deduced. It is shown that the saturation time of ECM is t sub s approx. equals 0.42 ms and only at last short stage (delta t less than 0.2 t sub s) the growth rate decreases to zero rather rapidly. So a SMMSE with very high BT will be produced if the ratio of number density of nonthermal electrons to that of background electrons, n sub s/n sub e, is larger than 4 x .00001.

Li, Hong-Wei↗

Spike train generation and current-to-frequency conversion in silicon diodes

A device physics model is developed to analyze spontaneous neuron-like spike train generation in current driven silicon p(+)-n-n(+) devices in cryogenic environments. The model is shown to explain the very high dynamic range (0 to the 7th) current-to-frequency conversion and experimental features of the spike train frequency as a function of input current. The devices are interesting components for implementation of parallel asynchronous processing adjacent to cryogenically cooled focal planes because of their extremely low current and power requirements, their electronic simplicity, and their pulse coding capability, and could be used to form the hardware basis for neural networks which employ biologically plausible means of information coding.

Coon, D. D.↗

The saturation of the electron-cyclotron maser instability and the interpretation of solar millisecond spikes

A self-consistent numeric two-dimensional code of the kinetic wave-particle equations developed to investigate the maser dynamics in the solar context is applied to solar millisecond-spike observations in order to improve the diagnostic capabilities of the theory of the electron-cyclotron maser instablitity. Attention is given to the inhomogeneity of the magnetic field selecting magneto-ionic modes with relatively short saturation lengths and suppressing mechanisms such as collisional deflection, free-free absorption, and gyroresonance absorption. The time scales of maser saturation in respect to time scales of global particle changes in a magnetic loop are covered, relevant observations of solar millisecond spikes are described, and the interpretation in terms of physical parameters deduced from the quasi-linear maser simulations are presented. It is demonstrated that the quasi-linear simulations make it possible to constrain the physical parameters from the observed time scale and frequency.

Aschwanden, M. J.↗