Search NASA⌕ Search

SEARCH · Search NASA

Results for “Statistical Sampling Sequence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

66 records · Page 4

The nature of the F str lambda 4077 stars. 3: Spectroscopy of the barium dwarfs and other CP stars

The abundances of C, O, Al, Ca, iron-peak and s-process elements have been derived from high-resolution spectra for a sample of stars classified as F str lambda 4077 by Bidelman. Among the 20 stars mentioned by Bidelman, we have discovered 8 barium dwarfs (or CH subgiants, according to Bond's terminology), while a 9th star, HD 182274, was already known as a CH subgiant. In addition, we have analyzed three barium stars taken from the list of Lu et al. (1983) which are probably dwarfs rather than giants, and three CH subgiants. The other 11 F str lambda 4077 stars resemble either the delta Delphini stars, since their iron abundance is enhanced while Ca is normal, or are probably spectrum composites. A few Am, Ap, lambda Bootis and normal stars have been analyzed for comparison. In particular, we have included three lambda Boo candidates, selected from their photometric properties, and their iron deficiency is confirmed. The spectroscopic, photometric and statistical evidences concerning the Ba dwarfs, support the idea that these stars may be the main sequence counterparts, and possibly the progenitors of the Ba giants. The C/O ratio varies in these stars from normal values to a maximum of 1.5, but mostly within 0.6 and 1.2. Some of these objects may therefore be considered, in this sense, as carbon stars. On the other hand, the abundances of carbon and s-process elements relative to iron are inversely correlated with metallicity, and may even exceed significantly those of typical, solar-metallicity carbon stars. Metal-deficient C stars must therefore have (C/Fe) greater than or approximately equal to 1 and (s/Fe) greater than or approximately equal to 1.5 as soon as (Fe/H) less than or approximately equal to -1. The neutron exposure is shown to increase when the metallicity decreases, which is compatible with the C-13 (alpha, n) O-16 neutron source, but not with the Ne-22 (alpha, n) Mg-25 one. The evolutionary state (within the main sequence) of the Ba dwarfs, is rediscussed in relation with their photometric and spectroscopic surface gravity, but it remains unclear.

North, P.↗

Multiple-Beam Detection of Fast Transient Radio Sources

A method has been designed for using multiple independent stations to discriminate fast transient radio sources from local anomalies, such as antenna noise or radio frequency interference (RFI). This can improve the sensitivity of incoherent detection for geographically separated stations such as the very long baseline array (VLBA), the future square kilometer array (SKA), or any other coincident observations by multiple separated receivers. The transients are short, broadband pulses of radio energy, often just a few milliseconds long, emitted by a variety of exotic astronomical phenomena. They generally represent rare, high-energy events making them of great scientific value. For RFI-robust adaptive detection of transients, using multiple stations, a family of algorithms has been developed. The technique exploits the fact that the separated stations constitute statistically independent samples of the target. This can be used to adaptively ignore RFI events for superior sensitivity. If the antenna signals are independent and identically distributed (IID), then RFI events are simply outlier data points that can be removed through robust estimation such as a trimmed or Winsorized estimator. The alternative "trimmed" estimator is considered, which excises the strongest n signals from the list of short-beamed intensities. Because local RFI is independent at each antenna, this interference is unlikely to occur at many antennas on the same step. Trimming the strongest signals provides robustness to RFI that can theoretically outperform even the detection performance of the same number of antennas at a single site. This algorithm requires sorting the signals at each time step and dispersion measure, an operation that is computationally tractable for existing array sizes. An alternative uses the various stations to form an ensemble estimate of the conditional density function (CDF) evaluated at each time step. Both methods outperform standard detection strategies on a test sequence of VLBA data, and both are efficient enough for deployment in real-time, online transient detection applications.

Thompson, David R.↗

NASA GeneLab Multi-study Visualization Portal

NASA GeneLab has helped advance the field of Space Biology by providing a public repository where researchers can store, share, analyze and visualize the results of space flight related omics experiments. The GeneLab data visualization portal allows any user, regardless of bioinformatics knowledge or access to computational resources, to interact with the experimental data, draw their own conclusions, and gain insights about the effects of space on living systems. These tools help democratize scientific research and foster the NASA Open Science initiative. The new multi-study feature of the GeneLab visualization platform allows users to mine study metadata from RNA sequencing (RNA-seq) experiments to identify samples of interest by filtering datasets based on organism, tissue, assay technology type, and/or factor. Once samples are selected from multiple datasets, users can combine and normalize the sample data, then utilize the visualization displays, including Principal Component Analysis (PCA) plots, to assess sample distributions. Finally, users can perform differential gene expression analysis on the combined data and visualize the results through PCA plots, Volcano plots, Pair plots, Heatmap, Ideogram and Gene Set Enrichment Analysis. All user-generated results and visualizations will be available for download. Here, we present a biological study using samples from multiple GeneLab RNA-seq datasets and analyzed using the multi-study visualization platform to demonstrate inter- and intra-study variability, as well as commonly differentially expressed genes between spaceflight and ground control conditions across datasets. This new feature opens a wide range of possibilities and opportunities for further development including combining other assay technology types and integration with batch effect correction techniques and machine learning applications. Overall, this tool allows users to increase the statistical power of individual experiments, validate hypothesis, identify patterns, and opens the door to new and exciting research.

space biology↗

The Search for Young Planetary Systems And the Evolution of Young Stars

The Space Interferometer Mission (SIM) will provide a census of planetary systems by con- ducting a broad survey of 2,000 stars that will be sensitive to the presence of planets with masses as small as approx. 15 Earth masses (1 Uranus mass) and a deep survey of approx. 250 of the nearest, stars with a mass limit of approx.3 Earth masses. The broad survey will include stars spanning a wide range of ages, spectral types, metallicity, and other important parameters. Within this larger context, the Young Stars and Planets Key Project will study approx. 200 stars with ages from 1 Myr to 100 Myr to understand the formation and dynamical evolution of gas giant planets. The SIM Young Stars and Planets Project will investigate both the frequency of giant planet formation and the early dynamical history of planetary systems. We will gain insight into how common the basic architecture of our solar system is compared with recently discovered systems with close-in giant planets by examining 200 of the nearest (less than 150 pc) and youngest (1-100 Myr) solar-type stars for planets. The sensitivity of the survey for stars located 140 pc away is shown in the planet mass-separation plane. We expect to find anywhere from 10 (assuming that only the presently known fraction of stars. 5-7%, has planets) to 200 (all young stars have planets) planetary systems. W-e have set our sensitivity threshold to ensure the detection of Jupiter-mass planets in the critical orbital range of 1 to 5 AU. These observations, when combined with the results of planetary searches of mature stars, will allow us to test theories of planetary formation and early solar system evolution. By searching for planets around pre-main sequence stars carefully selected to span an age range from 1 to 100 Myr, we will learn a t what epoch and with what frequency giant planets are found at the water-ice snowline where they are expected to form. This will provide insight into the physical mechanisms by which planets form and migrate from their place of birth, and about their survival rate. With these data in hand, we will provide data, for the first time, on such important questions as: What processes affect the formation and dynamical evolution of planets? When and where do planets form? What is initial mass distribution of planetary systems around young stars? How might planets be destroyed? What is the origin of the eccentricity of planetary orbits? What is the origin of the apparent dearth of companion objects between planets and brown dwarfs seen in mature stars? The observational strategy is a compromise between the desire to extend the planetary mass function as low as possible and the essential need to build up sufficient statistics on planetary occurrence. About half of the sample will be used to address the "where" and "when" of planet formation. We will study classical T Tauri stars (cTTs) which have massive accretion disks and post- accretion, weak-lined T Tauri stars (wTTs). Preliminary estimates suggest the sample will consist of approx. 30% cTTs and approx. 70% wTTs, driven in part by the difficulty of making accurate astrometric measurements toward objects with strong variability or prominent disks.

Beichman, Charles A.↗

EDL Simulation Results for the Mars 2020 Landing Site Safety Assessment

The Mars 2020 rover is NASA’s next flagship mission, set to explore Mars in search of scientific evidence of past microbial life. Importantly, the rover will also, for the first time, have the ability to collect and cache rock and soil samples for retrieval and return to laboratories here on Earth. A key step in the development of the Mars 2020 mission is the selection of a suitable landing site with the largest likelihood of meeting scientific goals. This decision is a complex and critical one that requires close interaction between the scientific and engineering communities. The chosen landing site must be both scientifically interesting — providing the project with the greatest possible chance of gathering credible and defendable scientific evidence — and also safe enough to attempt a landing in the first place. Thus, arguably one of the most important undertakings of the Entry, Descent, and Landing (EDL) team, is to effectively enumerate, quantify, and communicate the landing risks to all of the stakeholders. The culmination of this effort is the Landing Site Safety Assessment, which is a review commissioned by the project, presided over by the EDL Standing Review Board, and attended by management and science stakeholders, in which the EDL team communicates their assessment of the associated landing risks and the statistical probability of a successful landing at each of the final candidate landing sites. This paper summarizes the results of high-fidelity computer simulations of the Mars 2020 EDL sequence used in this assessment. From an EDL performance perspective, all four candidates offer similar level of robustness, which is in-family with Mars Science Laboratory (MSL). However, two new features of the Mars 2020 EDL sequence – range trigger and Terrain-Relative Navigation (TRN) – dramatically enhance the capability of the EDL system to safely land at landing sites with much more rugged terrain than ever before considered. This has allowed the landing site selection for Mars 2020 to proceed in a manner that has been unprecedentedly weighted more heavily toward scientific interest and less heavily on engineering constraints. With TRN, the overall probability of success is predicted to be approximately 99% for all of the candidates.

David Way↗

The HOSTS Survey-Exozodiacal Dust Measurements for 30 Stars

The Hunt for Observable Signatures of Terrestrial Systems survey searches for dust near the habitable zones (HZs) around nearby, bright main-sequence stars. We use nulling interferometry in the N band to suppress the bright stellar light and to probe for low levels of HZ dust around the 30 stars observed so far. Our overall detection rate is 18%, including four new detections, among which are the first three around Sun-like stars and the first two around stars without any previously known circumstellar dust. The inferred occurrence rates are comparable for early-type and Sun-like stars, but decrease from 60(sup +16)(sub -21)% for stars with previously detected cold dust to 8(sup +10)(sub -3)% for stars without such excess, confirming earlier results at higher sensitivity. For completed observations on individual stars, our sensitivity is five to ten times better than previous results. Assuming a lognormal excess luminosity function, we put upper limits on the median HZ dust level of 13 zodis (95% confidence) for a sample of stars without cold dust and of 26 zodis when focusing on Sun-like stars without cold dust. However, our data suggest that a more complex luminosity function may be more appropriate. For stars without detectable Large Binocular Telescope Interferometer (LBTI) excess, our upper limits are almost reduced by a factor of two, demonstrating the strength of LBTI target vetting for future exo-Earth imaging missions. Our statistics are limited so far, and extending the survey is critical to informing the design of future exo-Earth imaging surveys.

The Hunt for Observable Signatures of Terrestrial ↗

Effects of root-zone acidity on utilization of nitrate and ammonium in tobacco plants

Tobacco (Nicotiana tabacum L., cv. 'Coker 319') plants were grown for 28 days in flowing nutrient culture containing either 1.0 mM NO3- or 1.0 mM NH4+ as the nitrogen source in a complete nutrient solution. Acidities of the solutions were controlled at pH 6.0 or 4.0 for each nitrogen source. Plants were sampled at intervals of 6 to 8 days for determination of dry matter and nitrogen accumulation. Specific rates of NO3- or NH4+ uptake (rate of uptake per unit root mass) were calculated from these data. Net photosynthetic rates per unit leaf area were measured on attached leaves by infrared gas analysis. When NO3- [correction of NO-] was the sole nitrogen source, root growth and nitrogen uptake rate were unaffected by pH of the solution, and photosynthetic activity of leaves and accumulation of dry matter and nitrogen in the whole plant were similar. When NH4+ was the nitrogen source, photosynthetic rate of leaves and accumulation of dry matter and nitrogen in the whole plant were not statistically different from NO3(-) -fed plants when acidity of the solution was controlled at pH 6.0. When acidity for NH4(+) -fed plants was increased to pH 4.0, however, specific rate of NH4+ uptake decreased by about 50% within the first 6 days of treatment. The effect of acidity on root function was associated with a decreased rate of accumulation of nitrogen in shoots that was accompanied by a rapid cessation of leaf development between days 6 and 13. The decline in leaf growth rate of NH4(+) -fed plants at pH 4.0 was followed by reductions in photosynthetic rate per unit leaf area. These responses of NH4(+) -fed plants to increased root-zone acidity are characteristic of the sequence of responses that occur during onset of nitrogen stress.

NASA Discipline Life Support Systems↗

Improved Compression of Wavelet-Transformed Images

A recently developed data-compression method is an adaptive technique for coding quantized wavelet-transformed data, nominally as part of a complete image-data compressor. Unlike some other approaches, this method admits a simple implementation and does not rely on the use of large code tables. A common data compression approach, particularly for images, is to perform a wavelet transform on the input data, and then losslessly compress a quantized version of the wavelet-transformed data. Under this compression approach, it is common for the quantized data to include long sequences, or runs, of zeros. The new coding method uses prefixfree codes for the nonnegative integers as part of an adaptive algorithm for compressing the quantized wavelet-transformed data by run-length coding. In the form of run-length coding used here, the data sequence to be encoded is parsed into strings consisting of some number (possibly 0) of zeros, followed by a nonzero value. The nonzero value and the length of the run of zeros are encoded. For a data stream that contains a sufficiently high frequency of zeros, this method is known to be more effective than using a single variable length code to encode each symbol. The specific prefix-free codes used are from two classes of variable-length codes: a class known as Golomb codes, and a class known as exponential-Golomb codes. The codes within each class are indexed by a single integer parameter. The present method uses exponential-Golomb codes for the lengths of the runs of zeros, and Golomb codes for the nonzero values. The code parameters within each code class are determined adaptively on the fly as compression proceeds, on the basis of statistics from previously encoded values. In particular, a simple adaptive method has been devised to select the parameter identifying the particular exponential-Golomb code to use. The method tracks the average number of bits used to encode recent runlengths, and takes the difference between this average length and the code parameter. When this difference falls outside a fixed range, the code parameter is updated (increased or decreased). The Golomb code parameter is selected based on the average magnitude of recently encoded nonzero samples. The coding method requires no floating- point operations, and more readily adapts to local statistics than other methods. The method can also accommodate arbitrarily large input values and arbitrarily long runs of zeros. In practice, this means that changes in the dynamic range or size of the input data set would not require a change to the compressor. The algorithm has been tested in computational experiments on test images. A comparison with a previously developed algorithm that uses large code tables (generated via Huffman coding on training data) suggests that the data-compression effectiveness of the present algorithm is comparable to the best performance achievable by the previously developed algorithm.

Kiely, Aaron↗

A petabyte size electronic library using the N-Gram memory engine

A model library containing petabytes of data is proposed by Triada, Ltd., Ann Arbor, Michigan. The library uses the newly patented N-Gram Memory Engine (Neurex), for storage, compression, and retrieval. Neurex splits data into two parts: a hierarchical network of associative memories that store 'information' from data and a permutation operator that preserves sequence. Neurex is expected to offer four advantages in mass storage systems. Neurex representations are dense, fully reversible, hence less expensive to store. Neurex becomes exponentially more stable with increasing data flow; thus its contents and the inverting algorithm may be mass produced for low cost distribution. Only a small permutation operator would be recalled from the library to recover data. Neurex may be enhanced to recall patterns using a partial pattern. Neurex nodes are measures of their pattern. Researchers might use nodes in statistical models to avoid costly sorting and counting procedures. Neurex subsumes a theory of learning and memory that the author believes extends information theory. Its first axiom is a symmetry principle: learning creates memory and memory evidences learning. The theory treats an information store that evolves from a null state to stationarity. A Neurex extracts information data without a priori knowledge; i.e., unlike neural networks, neither feedback nor training is required. The model consists of an energetically conservative field of uniformly distributed events with variable spatial and temporal scale, and an observer walking randomly through this field. A bank of band limited transducers (an 'eye'), each transducer in a bank being tuned to a sub-band, outputs signals upon registering events. Output signals are 'observed' by another transducer bank (a mid-brain), except the band limit of the second bank is narrower than the band limit of the first bank. The banks are arrayed as n 'levels' or 'time domains, td.' The banks are the hierarchical network (a cortex) and transducers are (associative) memories. A model Neurex was built and studied. Data were 50 MB to 10 GB samples of text, data base, and images: black/white, grey scale, and high resolution in several spectral bands. Memories at td, S(m(sub td)), were plotted against outputs of memories at td-1. S(m(sub td)) was Boltzman distributed, and memory frequencies exhibited self-organized criticality (SOC); i.e., 'l/f(sup beta)' after long exposures to data. Whereas output signals from level n may be encoded with B(sub output) = O(-log(2)f(sup beta)) bits, and input data encoded with B(sub input) = O((S(td)/S(td-1))(sup n)), B(sup output)/B(sub input) is much less than 1 always, the Neurex determines a canonical code for data and it is a lossless data compressor. Further tests are underway to confirm these results with more data types and larger samples.

Bugajski, Joseph M.↗

Service Life Extension of the Propulsion System of Long-Term Manned Orbital Stations

One of the critical non-replaceable systems of a long-term manned orbital station is the propulsion system. Since the propulsion system operates beginning with the launch of station elements into orbit, its service life determines the service life of the station overall. Weighing almost a million pounds, the International Space Station (ISS) is about four times as large as the Russian space station Mir and about five times as large as the U.S. Skylab. Constructed over a span of more than a decade with the help of over 100 space flights, elements and modules of the ISS provide more research space than any spacecraft ever built. Originally envisaged for a service life of fifteen years, this Earth orbiting laboratory has been in orbit since 1998. Some elements that have been launched later in the assembly sequence were not yet built when the first elements were placed in orbit. Hence, some of the early modules that were launched at the inception of the program were already nearing the end of their design life when the ISS was finally ready and operational. To maximize the return on global investments on ISS, it is essential for the valuable research on ISS to continue as long as the station can be sustained safely in orbit. This paper describes the work performed to extend the service life of the ISS propulsion system. A system comprises of many components with varying failure rates. Reliability of a system is the probability that it will perform its intended function under encountered operating conditions, for a specified period of time. As we are interested in finding out how reliable a system would be in the future, reliability expressed as a function of time provides valuable insight. In a hypothetical bathtub shaped failure rate curve, the failure rate, defined as the number of failures per unit time that a currently healthy component will suffer in a given future time interval, decreases during infant-mortality period, stays nearly constant during the service life and increases at the end when the design service life ends and wear-out phase begins. However, the component failure rates do not remain constant over the entire cycle life. The failure rate depends on various factors such as design complexity, current age of the component, operating conditions, severity of environmental stress factors, etc. Development, qualification and acceptance test processes provide rigorous screening of components to weed out imperfections that might otherwise cause infant mortality failures. If sufficient samples are tested to failure, the failure time versus failure quantity can be analyzed statistically to develop a failure probability distribution function (PDF), a statistical model of the probability of failure versus time. Driven by cost and schedule constraints however, spacecraft components are generally not tested in large numbers. Uncertainties in failure rate and remaining life estimates increase when fewer units are tested. To account for this, spacecraft operators prefer to limit useful operations to a period shorter than the maximum demonstrated service life of the weakest component. Running each component to its failure to determine the maximum possible service life of a system can become overly expensive and impractical. Spacecraft operators therefore, specify the required service life and an acceptable factor of safety (FOS). The designers use these requirements to limit the life test duration. Midway through the design life, when benefits justify additional investments, supplementary life test may be performed to demonstrate the capability to safely extend the service life of the system. An innovative approach is required to evaluate the entire system, without having to go through an elaborate test program of propulsion system elements. Evaluating every component through a brute force test program would be a cost prohibitive and time consuming endeavor. ISS propulsion system components were designed and built decades ago. There are no representative ground test articles for some of the components. A 'test everything' approach would require manufacturing new test articles. The paper outlines some of the techniques used for selective testing, by way of cherry picking candidate components based on failure mode effects analysis, system level impacts, hazard analysis, etc. The type of testing required for extending the service life depends on the design and criticality of the component, failure modes and failure mechanisms, life cycle margin provided by the original certification, operational and environmental stresses encountered, etc. When specific failure mechanism being considered and the underlying relationship of that mode to the stresses provided in the test can be correlated by supporting analysis, time and effort required for conducting life extension testing can be significantly reduced. Exposure to corrosive propellants over long periods of time, for instance, lead to specific failure mechanisms in several components used in the propulsion system. Using Arrhenius model, which is tied to chemically dependent failure mechanisms such as corrosion or chemical reactions, it is possible to subject carefully selected test articles to accelerated life test. Arrhenius model reflects the proportional relationship between time to failure of a component and the exponential of the inverse of absolute temperature acting on the component. The acceleration factor is used to perform tests at higher stresses that allow direct correlation between the times to failure at a high test temperature to the temperatures to be expected in actual use. As long as the temperatures are such that new failure mechanisms are not introduced, this becomes a very useful method for testing to failure a relatively small sample of items for a much shorter amount of time. In this article, based on the example of the propulsion system of the first ISS module Zarya, theoretical approaches and practical activities of extending the service life of the propulsion system are reviewed with the goal of determining the maximum duration of its safe operation.

Kamath, Ulhas↗

A Combined Al-Mg/Pb-Pb Age of the Solar System

Astrophysical models of planet formation and protoplanetary disk evolution demand precise and accurate timing of the sequence of events in the solar nebula, relative to a time t=0, usually taken to be during the short epoch of CAI (Ca-rich, Al-rich inclusion) formation. Most CAIs formed withlive26Al (mean-life τ26= 1.034 Myr [1]), with an abundance 26Al/27Al ≈ (26Al/27Al)SS= 5.23 × 10-5[2]. We adopt this as the widespread level of 26Al in the solar nebula at t=0. Assuming spatial homogeneity of 26Al, an inclusion that had less 26Al, (26Al/27Al)0, formed a time Δt26= τ26ln[(26Al/27Al)SS/ (26Al/27Al)0] after t=0.These ages are typical precise to within ±0.1 Myr. Igneous bulk meteorites and inclusions can be relatively dated by the Al-Mg chronometer, but only ifΔt26<6 Myr. The Pb-Pb system is useful as a longer relative chronometer. It yields absolute ages tPb using 207Pb/206Pb, 206Pb/204Pb, and 238U/235U ratios measured indifferent portions of a sample, assuming certain half-lives [4]. These absolute ages are uncertain to within ±9 Myr due to uncertainties in the 235U half-life[3], but times of formation ΔtPb= tCAI–tPb relative to t=0, are more precise(±0.5Myr),iftCAI can be found. Here, tCAI means the Pb-Pb age that would be measured in CAIs using the half-lives the community typically uses, if they achieved isotopic closure at t=0. Unfortunately, direct Pb-Pb dating of CAIs has not definitively determined tCAI. Based on four CAIs with canonical (26Al/27Al)0,[5,6] found tPb= 4567.30 ± 0.16 Myr. No other CAI ages with measured 238U/235U have been reported in the refereed literature, but there are hints of other CAIs with ages tPb= 4568.0 ± 0.2 Myr [7] and tPb= 4568.3 ± 0.2 Myr [8].It is unclear whether anyof these igneous type B CAIs isotopically closed at t=0 or represents tCAI. Instead of measurements, we advocate finding tCAI by minimizing the discrepancies between the Al-Mg and Pb-Pb chronometers. Assuming Δt26=ΔtPb, we find the implied t’CAI= tPb+Δt26, then define t*CAIas the weighted mean of the t’CAI. t*CAIis the best guess for the Pb-Pb age of t=0; the assumption of homogeneity is justified if the t’CAI cluster within errors around t*CAI. This statistical approach is similar to, but improves on, that of[9]. We find t*CAI= 4568.73 ± 0.16 Myr. Below we discuss our methodology and the implications of this age for CAIs, 1.4 Myr older than the reported and typically used age 4567.30±0.16 Myr. Methods: We base our estimate of t*CAIon five achondrites for which published (26Al/27Al)0and Pb-Pb ages exist: the quenched angrites D’Orbigny, Sahara 99555 (SAH 99555), and Northwest Africa (NWA) 1670; the pseudo-eucrite Asuka 881394; and the inner disk achondrite. All are “NC” (non-carbonaceous) achondrites that likely cooled quickly enough that the Al-Mg and Pb-Pb systems achieved isotopic closure simultaneously. We also considered the “CC” (carbonaceous chondrite-like) achondrites NWA 2796 and NWA 6704, butdo not include them in our fit. Al-Mg and Pb-Pb seem not to have closed simultaneously, possibly because formation in the outer disk from volatile-rich composition led to slower cooling. Of the 8 chondrules from NWA 5697 measured by [20,21], we also consider the 4 for which 238U/235U was measured: 2-C1, 5-C2, 3-C5, 11-C1.Depending on their post-formation thermal histories, the Al-Mg and Pb-Pb systems in chondrules may or may not have closed simultaneously. Table 1: (26Al/27Al)0, Pb-Pb ages of selected samplesSample(26Al/27Al)0/ 10-6RefPb-PbRefD’Orbigny3.98±0.15104563.43±0.19♮10-12SAH 995553.64±0.18104563.88±0.2712NWA16705.92±0.59104564.39±0.24*10Asuka 88139413.1±0.5613-154564.98±0.1715NWA 73253.03±0.14164563.4±2.616NWA 27963.94±0.16174562.89±0.5917NWA 67043.03±0.14184562.76±0.26192-C17.56±1.53204567.57±0.56*215-C27.04±1.51204567.54±0.52*213-C58.85±1.83204566.20±0.63*2111-C15.55±1.84204565.84±0.72*21*regression based on one subset of data points ♮weighted mean of two datasets Pb-Pb ages are proportional to the intercept of the line formed by linear regression of 207Pb/206Pb vs. 206Pb/204Pb data from various washes, leachates and residues of acid dissolution of a sample. Because contamination by terrestrial or primordial Pb is pervasive, some fractions must be excluded from regressions to ensure a fit with acceptable mean squares weighted deviation (MSWD). Usually points are excluded based on low [Pb], or low 206Pb/204Pb ratio(low radiogenic component), with single outliers identified [11,12,15,16,17]. In the starred examples (Table 1)and the case of 3 CAI Pb-Pb ages [5], up to half the points were excluded solely because did not fit a pre-determined line. This approach is vulnerable to confirmation bias and produces fits with low MSWD and too-low Pb-Pb age uncertainty. Regressing the same data points as [10], were produce the Pb-Pb age of NWA 1670 of 4564.39±0.24 Myr. But selecting other combinations of data points, other, equally valid, isochrons yield ages from 4563.77±0.21 Myr to 4564.64±0.23 Myr. Similar arguments apply to the Pb-Pb isochrons built by [21] for chondrules 2-C1 (we find 4567.33±0.44 to 4567.85±0.46 Myr), 5-C2 (4566.84±0.53 to 4567.70±0.44 Myr), 3-C5 (4565.84±0.54to 4567.04±0.54)and 11-C1 (4565.36±0.51 to 4565.74±0.45 Myr). Our adopted ages for these and NWA 1670 are listed in Table 2.Table 2. tCAI estimated from various components, using our regressions for the chondrules & NWA 1670.SampleΔt26(Myr)tPb(Myr)t’CAI(Myr)D’Orbigny5.05±0.044563.43±0.194568.48±0.19SAH 995555.14±0.054563.88±0.274569.02±0.27NWA16704.64±0.104564.21±0.634568.85±0.67Asuka 8813943.81±0.044564.98±0.174568.79±0.17NWA 73255.33±0.054563.4±2.64568.7±2.6NWA 27965.06±0.044562.89±0.594567.95±0.59NWA 67045.29±0.134562.76±0.264568.05±0.292-C12.00±0.214567.59±0.704569.59±0.725-C22.07±0.224567.23±0.914569.30±0.933-C51.84±0.214566.44±1.124568.28±1.1411-C12.32±0.344565.52±0.664567.84±0.73achondrite4568.72±0.16chondrules4568.76±0.58combined4568.73±0.16A weighted average of the five NC achondrites(or just D’Orbigny, SAH 99555 and Asuka 881394)yields t*CAI= 4568.72 ± 0.16Myr. All are consistent with this value to within 1.8σ, and MSWD=1.5. Including the 4 U-corrected chondrules, t*CAI= 4568.73± 0.16Myrwith MSWD=1.66, which is statistically significant. All chondrules and NC achondrites are consistent with this to within 1.8σ, (Figure 1).Figure 1. Al-Mg formation times after t=0 vs. Pb-Pb ages. The five NC achondrites and four chondrules are consistent with a Pb-Pb age of t=0 of 4568.7 Myr. Discussion: The data from achondrites and chondrules are consistent with a single Pb-Pb age at t=0, justifying the assumption of 26Al homogeneity. The age, 4568.7 Myr, is ≈1.4 Myr older than the commonly accepted Pb-Pb age of CAIs that formed with canonical 26Al/27Al at t=0 [3]. Others have interpreted the discrepancy to signify 26Al heterogeneity in the CAI-forming region[5,21]. We suggest instead that CAIs were exposed to transient heating events that reset the Pb-Pb system without disturbing the Al-Mg system. Notably, chondrules typically experienced transient heating at these times in the nebula [22]. If so, direct measurements of CAIs will not yield as reliable a Pb-Pb age of t=0 as statistical approaches like this and that of [9].References:[1] Auer et al. 2009. [2] Jacobsen, B et al. 2008, EPSL 272, 353-364. [3] Tissot, Fet al. 2017, GCA 213, 593-617.[4] Villa, I et al. 2016, GCA 172, 387-392.[5] Amelin, Y et al. 2010, EPSL 300, 343-350.[6] Connelly, Jet al. 2012, Science 338, 651.[7] Bouvier, Aet al. 2011, LPICo 1639, 9054. [8] Bouvier, Aand Wadhwa, M2010, Nat Geosci 3, 637-641.[9] Nyquist, Let al. 2009, GCA 73, 5115-5136.[10] Schiller et al. 2015. [11] Wadhwa & Brennecka 2012. [12] Tissot et al. 2017. [13] Nyquist et al. 2003. [14] Wadhwa et al. 2009. [15] Wimpenny et al. 2019, GCA 244, 478-501.[16] Koefoed et al. 2016, GCA 183, 31-45. [17] Bouvier, A et al. 2011, GCA 75, 5310-5323. [18] Sanborn, Met al. 2019, GCA 245, 577-596. [19] Amelin, Yet al. 2019, GCA 245, 628-642.[20] Bollard, Jet al. 2017, Sci Adv 3 ,e1700407. [21] Bollard, Jet al. 2019, GCA 260, 62-83.[22] Villeneuve, J et al. 2009, Science 325, 985

S. J. Desch↗

Flight Mechanics Modeling and Simulation of the Earth Entry System

Introduction: The Mars Sample Return (MSR) Campaign being planned by NASA and ESA has the ambitious goal to return Mars samples back to Earth. This international collaboration had developed a concept of operations that included a ESA-designed Earth Return Orbiter (ERO) and NASA-designed Capture, Containment, and Return System (CCRS). The Earth Entry System (EES), consisting of a protective aeroshell that houses the samples as well as sample containment vessels, would conduct entry, descent, and landing (EDL) on a direct Earth trajectory. The EES would enter on a spin-stabilized ballistic trajectory with the goal to passively achieve aerodynamic stability throughout all regions of flight. The EDL sequence would end with the EES impacting the soft playa soil of the Utah Test and Training Range (UTTR). As of the submission of this abstract, the MSR campaign is undergoing a re-architecture leading to a pause in EES development. However, the novel approaches developed in flight mechanics modeling and simulation can significantly benefit the greater IPPW community in the development of Earth return vehicles. This paper will present the latest state of EES flight mechanics modeling and simulation. The paper will highlight the simulation architecture developed and key lessons learned from understanding of EDL trajectory sensitivities. Modeling and Simulation: Figure 1 provides a high-level concept of operations for the approach, entry, descent, and landing (AEDL) phase of the CCRS-portion of MSR. The objective of EES flight mechanics is to model and simulate the EES trajectory from ERO separation to ground impact at UTTR. A variety of flight mechanics simulation models were utilized to model both exo-atmopsheric and atmospheric portions of flight. 42, a 6-DOF simulation developed at Goddard Space Flight Center, is utilized for propagating the attitude of EES during exo-atmospheric flight. 42 allows for a variety of spin eject mechanism scenarios to be simulated for analysis. 10 minutes prior to entry, the 42 states are handed off to the EDL sims. The prime EDL sim utilized by EES is the Program to Optimize Simulated Trajectories II (POST2), a 6-DOF sim developed at Langley Research Center, and the independent verification and validation EDL sim utilized is DSENDS, a 6-DOF sim developed at Jet Propulsion Laboratory. Figure 2 provides a visualization of the flight mechanics simulation model flow through various points in the AEDL phase. Due to the existence of a variety of sim models, the EES flight mechanics team developed processes for data hand-off. These processes included the development of a centralized coordinate frame document, utilization of a single, centralized simulation input document for all sims to reference, and hand-off files containing both the technical data to be ingested by other flight mechanics sims as well as annotations of modeling assumptions utilized to generate the data. Figure~\ref{fig:post2simarchitecture} provides an overview of the POST2 sim architecture wherein POST2 ingests numerous subsystem models and input files. The dispersed state file generated by MONTE provides the position/velocity state of the trajectory while the 42 Handoff file provides the attitude. The aerodynamics database, delivered by the EES aeroscience team, is utilized to simulate the aerodynamic forces and moments experienced during EDL. A custom atmosphere model, developed by EES atmosphere team, is utilized to simulate the anticipated atmosphere environment around the region of Earth through which the EES trajectory flys. These inputs and subsystem models can be varied depending on the AEDL flight mechanics scenario being simulated. Monte Carlo simulations are utilized to generate statistical AEDL performance metrics in the form of scorecards and violin plots. Furthermore, outputs from the POST2 simulation are utilized for follow-on analyses including aerothermal and landing performance. \section{Flight Mechanics Lessons Learned} Though the EES flight mechanics team uncovered a variety of lessons learned through the analysis conducted to support CCRS through preliminary design review, this paper will highlight the most important lessons. A key AEDL performance goal is to ensure the landing footprint of EES remains on the UTTR south range. A common modeling strategy used in EDL analysis is One-Variable-At-a-Time (OVAT). OVAT analysis provides insight into the key drivers that affect AEDL performance metrics. Figure 3 shows the landing ellipses for single dispersion sources as compared to the baseline aggregate of all dispersions. The figure shows that atmosphere winds alone dominate the size of the footprint ellipse (note: EES does not use a parachute unlike previous Earth-return missions and is in wind-driven free fall for ~5min). The significance of the wind led the EES flight mechanics team to pursue the development of a Custom Atmosphere Model [4], in lieu of EarthGRAM [1], built on actual radiosonde wind measurements around the UTTR-region. This decision was driven by the realism in the generated footprint ellipses and lessons-learned from Stardust [5]. These findings will be invaluable for future Earth-return missions in providing an early understanding of the key drivers affecting footprint size and modeling considerations for which to account. Another lesson learned is tied to the AEDL performance goal of achieving passive stability throughout all regions of flight. It is well understood that blunt-body aeroshells are less stable as they transition from supersonic to subsonic. Eliminating a backshell does help improvestability; however, other phenomena such as roll-induced instability during terminal descent can still arise. The EES flight mechanics team developed stability metrics as tools to better understand the causes of and better predict the onset of dynamic instability. These tools were built upon analytical models developed by Jaffe [3] and Murphy [2]. The tools were shown to both be very accurate in correlation with actual unstable cases and useful in developing stability margin policies based on the vehicle design and simulation considerations (e.g. sphere-cone angle change, mass change, wind turbulence). These tools allowed for the current EES design to demonstrate the ability to achieve passive stability and can be an invaluable tool for consideration in the design of parachute-less Earth-return vehicles.

Rohan Deshmukh↗