Search NASA⌕ Search

SEARCH · Search NASA

Results for “Swath Data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Highly Protable Airborne Multispectral Imaging System

A portable instrumentation system is described that includes and airborne and a ground-based subsytem. It can acquire multispectral image data over swaths of terrain ranging in width from about 1.5 to 1 km. The system was developed especially for use in coastal environments and is well suited for performing remote sensing and general environmental monitoring. It includes a small,munpilotaed, remotely controlled airplance that carries a forward-looking camera for navigation, three downward-looking monochrome video cameras for imaging terrain in three spectral bands, a video transmitter, and a Global Positioning System (GPS) reciever.

Lehnemann, Robert↗

The Global Precipitation Measurement (GPM) Mission for Science and Society

Precipitation is a key source of freshwater; therefore, observing global patterns of precipitation and its intensity is important for science, society, and understanding our planet in a changing climate. In 2014, the National Aeronautics and Space Administration (NASA) and the Japan Aerospace Exploration Agency (JAXA) launched the Global Precipitation Measurement (GPM) Core Observatory (CO) spacecraft. The GPM CO carries the most advanced precipitation sensors currently in space including a dual-frequency precipitation radar provided by JAXA for measuring the three-dimensional structures of precipitation and a well-calibrated, multifrequency passive microwave radiometer that provides wide-swath precipitation data. The GPM CO was designed to measure rain rates from 0.2 to 110.0 mm h1 and to detect moderate to intense snow events. The GPM CO serves as a reference for unifying the data from a constellation of partner satellites to provide next-generation, merged precipitation estimates globally and with high spatial and temporal resolutions. Through improved measurements of rain and snow, precipitation data from GPM provides new information such as details on precipitation structure and intensity; observations of hurricanes and typhoons as they transition from the tropics to the midlatitudes; data to advance near-real-time hazard assessment for floods, landslides, and droughts; inputs to improve weather and climate models; and insights into agricultural productivity, famine, and public health. Since launch, GPM teams have calibrated satellite instruments, refined precipitation retrieval algorithms, expanded science investigations, and processed and disseminated precipitation data for a range of applications. The current status of GPM, its ongoing science, and its future plans are presented.

Gail Skofronick-Jackson↗

Residual waste detection in HLW tanks - 15701

This research uses commercial sonar technology to monitor residual waste in the U.S. Department of Energy's (DOE) Hanford Site high-level-waste staging tanks, with primary focus on the detection and imaging of the settled solids at specified areas of interest along the tank surface within a limited amount of time. High-level waste (HLW) is generated at the US-DOE Hanford Site as a by-product from the processing of nuclear materials. Waste is currently stored in 177 underground carbon-steel waste tanks. Pulse jet mixers (PJM) are often used to break loose and suspend the solids that have settled at the bottom of the tanks. A typical tank can have 6-8 pulse tubes. The Solid Liquid Interface Monitor (SLIM) must be capable of measuring dynamic movements in Region 1 zone between each PJM cycle. SLIM was originally developed to map the sludge/supernate interface within the U.S. DOE Hanford Site's HLW tanks. SLIM is a dual-axis mechanically rotating sonar and consists of an acoustic transducer, rotation motor with gearbox, tilt motor, position reference sensor, and pressure balancing mechanisms and its associated deployment platform. The sonar gathers a swath of data in the horizontal plane and rotates the transducer through a programmed angle around the vertical axis. Oil-filled device. No user serviceable parts. No semiconductors. Hard anodized aluminum and polyurethane delrin. May be deployed in areas of significant radioactivity. Kaolin will be used during mixing operations in order to simulate the physical properties of the expected slurry. In order to reduce the amount of time needed to image and object, all settings were decreased to their minimal state. The low resolution settings provide insufficient data for the manufacturer's 3D profiler to compile a visible point cloud and much less to allow the meshing algorithm to work properly. Several filtering algorithms have been applied to each scan in order to remove erroneous spikes and ghosting effects. Data has been collected for the mixing process of kaolin. This data consists of scans executed while the pump was active and inactive. The imaging algorithm has also been used with data derived from scans of 3% or less of kaolin. Future work: Mixing of kaolin within an experimental tank will be conducted in order to simulate the settling time of the HLW within the tank. The same filtering algorithms will be applied to each of these scans to evaluate the SLIM's efficiency to image solids at the bottom of a tank through increasing volume of kaolin.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Tropical Rainfall Measuring Mission (TRMM) project. VI - Spacecraft, scientific instruments, and launching rocket. Part 3 - The electrically Scanning Microwave Radiometer and the Special Sensor Microwave/Imager

The two microwave radiometers for TRMM are designed to measure thermal microwave radiation upwelling from the earth. The Electrically Scanning Microwave Radiometer (ESMR) scans from 50 deg to the left through nadir to 50 deg to the right in 78 steps with no moving mechanical parts in a band centered at 19.35 GHz. The TRMM concept uses the radar to develop a climatology of rain-layer thickness which can be used for the interpretation of the radiometer data over a swath wider than the radar. The ESMR data are useful for estimating rain intensity only over an ocean background. The Special Sensor Microwave/Imager (SSM/I), which scans conically with three dual polarized channels at 19, 37, and 85 GHz and a single polarized channel at 22 GHz, provides a wider range of rainfall intensities. The SSM/I spins about an axis parallel to the local spacecraft vector and 128 uniformly spaced samples of the 85 GHz data are taken on each scan over a 112-deg scan region simultaneously with 64 samples of the other frequencies.

Wilheit, Thomas T.↗

AIRS Maps from Space Processing Software

This software package processes Atmospheric Infrared Sounder (AIRS) Level 2 swath standard product geophysical parameters, and generates global, colorized, annotated maps. It automatically generates daily and multi-day averaged colorized and annotated maps of various AIRS Level 2 swath geophysical parameters. It also generates AIRS input data sets for Eyes on Earth, Puffer-sphere, and Magic Planet. This program is tailored to AIRS Level 2 data products. It re-projects data into 1/4-degree grids that can be combined and averaged for any number of days. The software scales and colorizes global grids utilizing AIRS-specific color tables, and annotates images with title and color bar. This software can be tailored for use with other swath data products for the purposes of visualization.

Thompson, Charles K.↗

Mapping Inundation from Hurricane Florence (2018) with L-Band Synthetic Aperture Radar, Commercial Imagery, and Ancillary Data via Machine Learning Classification

During and after flooding events, mapping the extent of floodwaters aids in the distribution of resources, recovery efforts, and damage assessment practices. Development of a land cover classification system focused on mapping inundation after major hurricane events using synthetic aperture radar (SAR) data could allow for the production of near-real-time inundation mapping, enabling government and emergency response entities to get a preliminary idea of a developing situation. Complimentary optical and SAR images from domestic and foreign entities are brought together through activations of the International Charter: Space and Major Disasters to support response efforts, from true-color, near-infrared, and thermal remote sensing data obtained by NASA, NOAA, and international satellites to the collection of high-resolution true color aerial photography by NOAA and the National Geodetic Survey. In response to Hurricane Florence of 2018, NASA JPL collected numerous swaths of quad-pol L-band SAR data with the Uninhabited Aerial Vehicle Synthetic Aperture Radar (UAVSAR) instrument observing the record-setting river stages across North and South Carolina. The resulting fully-polarized SAR images allow for mapping of inundation extent at a high spatial resolution with a unique advantage over optical imaging stemming from the sensor’s ability to penetrate cloud cover and dense vegetation. In this study, true-color NOAA aerial and commercial satellite imagery are used in conjunction with four UAVSAR data swaths centered on the Lumberton and Cape Fear River basins in southeastern North Carolina to develop a Random Forest classification model focused on mapping open water and floodwater otherwise obscured by vegetation or lingering cloud cover. Ancillary building footprint, transportation route, and population data will also be incorporated into the classification scheme to estimate the societal impacts of flooding based on the proximity of features to detected inundation. Preliminary results from the Hurricane Florence case study will be discussed in addition to the limitations of available validation data for assessment of the classifier’s accuracy.

Alexander M Melancon↗

Addressing the Big-Earth-Data Variety Challenge with the Hierarchical Triangular Mesh

We have implemented an updated Hierarchical Triangular Mesh (HTM) as the basis for a unified data model and an indexing scheme for geoscience data to address the variety challenge of Big Earth Data. We observe that, in the absence of variety, the volume challenge of Big Data is relatively easily addressable with parallel processing. The more important challenge in achieving optimal value with a Big Data solution for Earth Science (ES) data analysis, however, is being able to achieve good scalability with variety. With HTM unifying at least the three popular data models, i.e. Grid, Swath, and Point, used by current ES data products, data preparation time for integrative analysis of diverse datasets can be drastically reduced and better variety scaling can be achieved. In addition, since HTM is also an indexing scheme, when it is used to index all ES datasets, data placement alignment (or co-location) on the shared nothing architecture, which most Big Data systems are based on, is guaranteed and better performance is ensured. Moreover, our updated HTM encoding turns most geospatial set operations into integer interval operations, gaining further performance advantages.

SciDB↗

Application of Spectral Analysis Techniques in the Intercomparison of Aerosol Data: Part III. Using Combined PCA to Compare Spatiotemporal Variability of MODIS, MISR and OMI Aerosol Optical Depth

Satellite measurements of global aerosol properties are very useful in constraining aerosol parameterization in climate models. The reliability of different data sets in representing global and regional aerosol variability becomes an essential question. In this study, we present the results of a comparison using combined principal component analysis (CPCA), applied to monthly mean, mapped (Level 3) aerosol optical depth (AOD) product from Moderate Resolution Imaging Spectroradiometer (MODIS), Multiangle Imaging Spectroradiometer (MISR), and Ozone Monitoring Instrument (OMI). This technique effectively finds the common space-time variability in the multiple data sets by decomposing the combined AOD field. The results suggest that all of the sensors capture the globally important aerosol regimes, including dust, biomass burning, pollution, and mixed aerosol types. Nonetheless, differences are also noted. Specifically, compared with MISR and OMI, MODIS variability is significantly higher over South America, India, and the Sahel. MODIS deep blue AOD has a lower seasonal variability in North Africa, accompanied by a decreasing trend that is not found in either MISR or OMI AOD data. The narrow swath of MISR results in an underestimation of dust variability over the Taklamakan Desert. The MISR AOD data also exhibit overall lower variability in South America and the Sahel. OMI does not capture the Russian wild fire in 2010 nor the phase shift in biomass burning over East South America compared to Central South America, likely due to cloud contamination and the OMI row anomaly. OMI also indicates a much stronger (boreal) winter peak in South Africa compared with MODIS and MISR.

satellite observation↗

Quantitatively Monitoring Bubble-Flow at a Seep Site Offshore Oregon: Field Trials and Methodological Advances for Parallel Optical and Hydroacoustical Measurements

Two lander-based devices, the Bubble-Box and GasQuant-II, were used to investigate the spatial and temporal variability and total gas flow rates of a seep area offshore Oregon, United States. The Bubble-Box is a stereo camera–equipped lander that records bubbles inside a rising corridor with 80 Hz, allowing for automated image analyses of bubble size distributions and rising speeds. GasQuant is a hydroacoustic lander using a horizontally oriented multibeam swath to record the backscatter intensity of bubble streams passing the swath plain. The experimental set up at the Astoria Canyon site at a water depth of about 500 m aimed at calibrating the hydroacoustic GasQuant data with the visual Bubble-Box data for a spatial and temporal flow rate quantification of the site. For about 90 h in total, both systems were deployed simultaneously and pressure and temperature data were recorded using a CTD as well. Detailed image analyses show a Gaussian-like bubble size distribution of bubbles with a radius of 0.6–6 mm (mean 2.5 mm, std. dev. 0.25 mm); this is very similar to other measurements reported in the literature. Rising speeds ranged from 15 to 37 cm/s between 1- and 5-mm bubble sizes and are thus, in parts, slightly faster than reported elsewhere. Bubble sizes and calculated flow rates are rather constant over time at the two monitored bubble streams. Flow rates of these individual bubble streams are in the range of 544–1,278 mm 3 /s. One Bubble-Box data set was used to calibrate the acoustic backscatter response of the GasQuant data, enabling us to calculate a flow rate of the ensonified seep area (~1,700 m 2 ) that ranged from 4.98 to 8.33 L/min (5.38 × 10 6 to 9.01 × 10 6 CH 4 mol/year). Such flow rates are common for seep areas of similar size, and as such, this location is classified as a normally active seep area. For deriving these acoustically based flow rates, the detailed data pre-processing considered echogram gridding methods of the swath data and bubble responses at the respective water depth. The described method uses the inverse gas flow quantification approach and gives an in-depth example of the benefits of using acoustic and optical methods in tandem.

54 ENVIRONMENTAL SCIENCES↗

Radarsat Processing System at ASF

Radarsat is a Canadian polar orbiting remote sensing satellite scheduled for launch in September 1995. Its lone instrument on-board is a synthetic aperture radar (SAR) that is capable of operating in a number of imaging modes including the first operational ScanSAR mode. As one of the data reception, processing and archive facility for Radarsat data, Alaska SAR Facility (ASF) has responded to its Science users by establishing a Radarsat processing system to handle the data processing of all Radarsat modes. This task involves enhancements to the high throughput hardware based Alaska SAR Processor (ASP) to handle standard mode Radarsat data in addition to its existing ERS and JERS capabilities, the addition of the new ScanSAR Processor (SSP) to process the Radarsat ScanSAR mode data, and the introduction of a Precision Processor (PP) to accommodate the special Radarsat modes such as fine resolution and wide swath. For raw data ingestion and distribution to the appropriate SAR processor, a new Control Processor (CP) and Raw Data Scanner (RDS) subsystem is also incorporated.

Radarsat↗

Illuminating Albedo: Using MOSAiC Data to Assess the CERES Cloud Radiative Swath (CRS) Albedo Quantification Process

Increasing surface and lower tropospheric air temperatures as a result of rising greenhouse gases are expected to be most pronounced over the Arctic. Such rapid changes alter the surface climate of the region, and impacts can be observed atmospherically, oceanographically, and biogeophysically. Accurately quantifying the impact of decreasing surface albedo on the surface energy budget with satellite observations alone is complicated by a lack of shortwave radiation during winter and seasonal/spatial heterogeneity of surface type and associated spectral albedo. NASA’s Clouds and the Earth’s Radiant Energy System (CERES) project features the Cloud Radiative Swath (CRS) product, which builds upon the Single Scanner Footprint (SSF) product by using the NASA Langley Fu-Liou radiative transfer model to calculate a robust and high-quality array of surface and atmospheric radiative fluxes on an instantaneous, footprint-level scale. This study aims to use MOSAiC and CRS data to illuminate potential uncertainties in the CERES albedo production process, with goals of determining 1) spectral albedo under clear sky conditions when stratified by ice concentration, 2) the uncertainty associated with CERES surface albedo “history maps” when compared against observations captured during MOSAiC, and 3) the magnitude of variation between meteorological inputs compared to those from MOSAiC.

Emily Monroe↗

Multispectral mapper - Imaging spectroscopy as applied to the mapping of earth resources

An instrument concept that uses solid-state array imaging has been developed for a future land observing system. The design concept is responsive to a variety of use needs and provides improved capabilities over the planned Landsat Thematic Mapper. A comparison of the differing approaches to the instrument design was made, resulting in the selection of a concept which uses a spectrograph coupled to a line-array imager to provide simultaneous spatial and spectral resolution. The design provides an inherent solution to the problem of achieving precise registration among the spectral bands. Data processing on the focal plane is used to select the spectral bands and their band widths. Onboard capabilities include radiometric correction, selection of instantaneous field-of-view and swath width, and data compression.

Wellman, J. B.↗

LAWS hurricane studies

The Laser Atmospheric Wind Sounder (LAWS) has recently been deselected from the Earth Observing System (EOS). A broad range of orbital altitudes and laser power are being considered for future wind lidar missions. As a result, as was anticipated in the proposed work, it may be impossible to meaningfully study tropical cyclones with lidar wind data because data coverage (i.e., swath width) is insufficient. Research on this grant has focused on how to maximize the benefits of a wind lidar regardless of the choice of platform or laser. Our studies have shown that major unsolved problems in tropical meteorology relate to the structure, dynamics, and role in tropical cyclogenesis of 'easterly waves'. These disturbances exist almost everywhere in the global subtropics. Results are described that focus upon easterly wave impacts on eastern Pacific tropical cyclogenesis. The availability of wind lidar data would create tremendous opportunities for the study of these waves and their role in the general circulation.

Molinari, John↗

NASA Tech Briefs, October 2012

Topics discussed include: Detection of Chemical Precursors of Explosives; Detecting Methane From Leaking Pipelines and as Greenhouse Gas in the Atmosphere; Onboard Sensor Data Qualification in Human-Rated Launch Vehicles; Rugged, Portable, Real-Time Optical Gaseous Analyzer for Hydrogen Fluoride; A Probabilistic Mass Estimation Algorithm for a Novel 7-Channel Capacitive Sample Verification Sensor; Low-Power Architecture for an Optical Life Gas Analyzer; Online Cable Tester and Rerouter; A Three-Frequency Feed for Millimeter-Wave Radiometry; Capacitance Probe Resonator for Multichannel Electrometer; Inverted Three-Junction Tandem Thermophotovoltaic Modules; Fabrication of Single Crystal MgO Capsules; Inflatable Hangar for Assembly of Large Structures in Space; Mars Aqueous Processing System; Hybrid Filter Membrane; Design for the Structure and the Mechanics of Moballs; Pressure Dome for High-Pressure Electrolyzer; Cascading Tesla Oscillating Flow Diode for Stirling Engine Gas Bearings; Compact, Low-Force, Low-Noise Linear Actuator; Ultra-Compact Motor Controller; Extreme Ionizing-Radiation-Resistant Bacterium; Wideband Single-Crystal Transducer for Bone Characterization; Fluorescence-Activated Cell Sorting of Live Versus Dead Bacterial Cells and Spores; Nonhazardous Urine Pretreatment Method; Laser-Ranging Transponders for Science Investigations of the Moon and Mars; Ka-Band Waveguide Three-Way Serial Combiner for MMIC Amplifiers; Structural Health Monitoring with Fiber Bragg Grating and Piezo Arrays; Low-Gain Circularly Polarized Antenna with Torus-Shaped Pattern; Stereo and IMU- Assisted Visual Odometry for Small Robots; Global Swath and Gridded Data Tiling; GOES-R: Satellite Insight; Aquarius iPhone Application; Monitoring of International Space Station Telemetry Using Shewhart Control Charts; Theory of a Traveling Wave Feed for a Planar Slot Array Antenna; Time Manager Software for a Flight Processor; Simulation of Oxygen Disintegration and Mixing With Hydrogen or Helium at Supercritical Pressure; A Superfluid Pulse Tube Refrigerator Without Moving Parts for Sub-Kelvin Cooling; Sapphire Viewports for a Venus Probe; The Mobile Chamber; Electric Propulsion Induced Secondary Mass Spectroscopy; and Radiation-Tolerant DC-DC Converters.

Source record↗

C-FOG: Life of Coastal Fog

C-FOG is a comprehensive bi-national project dealing with the formation, persistence, and dissipation (life cycle) of fog in coastal areas (coastal fog) controlled by land, marine, and atmospheric processes. Given its inherent complexity, coastal-fog literature has mainly focused on case studies, and there is a continuing need for research that integrates across processes (e.g., air–sea–land interactions, environmental flow, aerosol transport, and chemistry), dynamics (two-phase flow and turbulence), microphysics (nucleation, droplet characterization), and thermodynamics (heat transfer and phase changes) through field observations and modeling. Central to C-FOG was a field campaign in eastern Canada from 1 September to 8 October 2018, covering four land sites in Newfoundland and Nova Scotia and an adjacent coastal strip transected by the Research Vessel Hugh R. Sharp . An array of in situ, path-integrating, and remote sensing instruments gathered data across a swath of space–time scales relevant to fog life cycle. Satellite and reanalysis products, routine meteorological observations, numerical weather prediction model (WRF and COAMPS) outputs, large-eddy simulations, and phenomenological modeling underpin the interpretation of field observations in a multiscale and multiplatform framework that helps identify and remedy numerical model deficiencies. An overview of the C-FOG field campaign and some preliminary analysis/findings are presented in this paper.

58 GEOSCIENCES↗

Quantifying the effect of 3D models on moment tensor results using synthetic data

Moment tensors provide vital information on seismic source properties for seismic events. Moment tensors require seismic wavespeed models to compute Green’s functions, which measure the impulse response between a given source and receiver. Traditionally, researchers have used one-dimensional velocity models to calculate Green’s functions since 1D Green’s functions are computationally cheap to compute. Local 1D velocity models can also accurately model waveforms at short distances (< 500 km). However, 1D velocity models do not account for lateral heterogeneity, which can cause significant misfit in tectonically complex regions such as the Middle East (Covellone and Savage, 2012). Green’s functions calculated using 3D seismic wavespeed models have been shown to perform better in tectonically complex regions (Covellone and Savage, 2012; Kintner and Modrak, 2022), so we are interested in quantifying the effect of considering 3D structure on moment tensor inversion results. The Middle East is an ideal study area for a synthetic moment tensor test for two reasons. Firstly, the Middle East is a tectonically complex region that has been heavily studied. Secondly, the Middle East has significant seismic activity throughout the region, but imperfect station coverage due to limited open data through large swaths of the domain. The tectonic complexity and uneven station coverage will test real-world performance even in a synthetic experiment.

58 GEOSCIENCES↗

Surveying the earth's environment from space - Spectral, areal, temporal coverage trends

Attention is given to various areas of satellite applications to monitoring the earth's environment. These trends primarily concern spectral, areal, and temporal coverage. Various environmental monitors are discussed in terms of derived economic benefits. Several types of remote sensors for earth applications are described, noting spectral channels, resolution cell size, swath width, and data rate. A sample environmental monitoring system is presented which includes five geostationary satellites, and three or four low earth orbit spacecraft

Nagler, R. G.↗

Evaluation of ERIM optically processed SEASAT SAR data

The results of three studies on the radiometric and geometric properties of optically processed SEASAT SAR imagery are summarized. The accuracy with which the image scale can be predicted based upon a knowledge of the SAR platform and recording system parameters and the processor characteristics was evaluated. The considerations involved in making radiometric measurements from image films, the use of point targets for calibrating the effects of Doppler spectrum shifts on the radiometric calibration of the SAR image data over extended swath lengths was evaluated

Shuchman, R. A.↗