Search NASA⌕ Search

SEARCH · Search NASA

Results for “TARGET SIMULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Analysis of short pulse laser altimetry data obtained over horizontal path

Recent pulsed measurements of atmospheric delay obtained by ranging to the more realistic targets including a simulated ocean target and an extended plate target are discussed. These measurements are used to estimate the expected timing accuracy of a correlation receiver system. The experimental work was conducted using a pulsed two color laser altimeter.

Im, K. E.↗
NASA NTRS1980

Preliminary evaluation of time and distance spacing cues using a cockpit displayed target

A simulator evaluation was conducted to compare time and distance selfspacing cues wherein a pilot establishes and maintains separation from a cockpit displayed target. Langley's terminal configured vehicle simulator which represents an advanced aircraft employing cathode ray tubes for primary flight displays and highly augmented flight control modes was used. Three tasks, two in trail rendezvous tasks (target straight and level and target turning) and one merge task were utilized. Three pilots flew each task twice, once with a time predictor cue and once with a distance predictor. Both time and distance spacing methods are operationally acceptable to the pilots. A slight preference was indicated by the pilots for the distance based predictor in performing rendezvous and merging tasks. Analysis of the recorded data showed the spacing performance with both predictors was essentially the same.

Kelly, J. R.↗
DOE OSTI2025

Forward modeling fluctuations in the DESI LRGs target sample using image simulations

We use the forward modeling pipeline, Obiwan, to study the imaging systematics of the Luminous Red Galaxies (LRGs) targeted by the Dark Energy Spectroscopic Instrument (DESI). Imaging systematics refers to the false fluctuation of galaxy densities due to varying observing conditions and astrophysical foregrounds corresponding to the imaging surveys from which DESI LRG target galaxies are selected. We update the Obiwan pipeline, which we previously developed to simulate the optical images used to target DESI data, to further simulate WISE images in the infrared. This addition allows simulating the DESI LRGs sample, which utilizes WISE data in the target selection. Deep DESI imaging data combined with a method to account for biases in their shapes is used to define a truth sample of potential LRG targets. We inject these data evenly throughout the DESI Legacy Imaging Survey footprint at declinations between -30 and 32.375 degrees. We simulate a total of 15 million galaxies to obtain a simulated LRG sample (Obiwan LRGs) that predicts the variations in target density due to imaging properties. We find that the simulations predict the trends with depth observed in the data, including how they depend on the intrinsic brightness of the galaxies. We observe that faint LRGs are the main contributing source of the imaging systematics trend induced by depth. We also find significant trends in the data against Galactic extinction that are not predicted by Obiwan. These trends depend strongly on the particular map of Galactic extinction chosen to test against, implying systematic contamination in the Galactic extinction maps is a likely root cause (e.g., Cosmic-Infrared Background, dust temperature correction). We additionally observe a morphological change of the DESI LRGs population evidenced by a correlation between OII emission line average intensity and the size of the z-band PSF. This effect most likely results from uncertainties in background subtraction. The detailed findings we present should be used to guide any observational systematics mitigation treatment for the clustering of the DESI LRGs sample.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2002

Prelaunch Instrument Calibration in the Real World: The GOES Example

The pre-launch ground infrared calibration of the Geostationary Operational Environmental Satellite (GOES) N-Q Imager and Sounder is presented. Ground calibration provides information necessary to the accurate on-orbit calibration of these radiometers. Infrared channels are calibrated in a thermal vacuum environment, under minimum and maximum mission operation temperatures, using a variable-temperature warm target to simulate the Earth scene and a cold target to simulate the space scene. Brightness temperatures derived from observation of the instrument internal calibration target, used for on-orbit calibration, are compared to brightness temperatures of the external calibration target as a check of relative accuracy using these two sources. Changes to the GOES N-Q specification from GOES I-M are highlighted, as well as results of noise, relative calibration accuracy, and spectral response performance to date. For completeness, results of spatial and pointing performance will be presented. Enhancements to test methodology and data processing techniques are highlighted throughout.

Murphy-Morris, J.↗
NASA NTRS2012

MSL DSENDS EDL Analysis and Operations

This paper presents the operations experience of the JPL EDL (Entry, Descent, and Landing) trajectory simulation team, focusing on events in the week before landing and EDL itself. A brief description of the EDL trajectory simulation tool used for targeting and simulation verification analysis will be presented, including a high level discussion of the required modeling. Initialization and output interfaces used for landing hazard analysis will also be covered, along with discussion of real-time EDL event detection using radiometric Doppler data.

Entry, descent, and landing (EDL)↗
DOE OSTI2025

Assessment of dynamic-screw-pinch-driven, current-scaled MagLIF target implosion performance using 3D magnetohydrodynamic simulations

Analytic studies and two-dimensional “clean” radiation-magnetohydrodynamic (rad-MHD) simulations employing dynamical similarity driver-target scaling prescriptions [Ruiz et al., Phys. Plasmas 30, 032708 (2023)] suggest that Magnetized Liner Inertial Fusion (MagLIF) target implosions can scale to > 10 MJ DT fusion yields when peak drive current is increased beyond 60 MA. We present results from three-dimensional (3D) rad-MHD simulations of similarity-scaled MagLIF target implosions at peak drive currents ranging from 15 to 40 MA. Simulations in this study suggest that magneto-Rayleigh–Taylor instability (MRTI) growth and feedthrough to the fuel region are more severe at higher drive current scales, which reduces the fusion yield compared to prior analytic and 2D clean simulation predictions. In contrast to standard MagLIF, simulations of current-scaled MagLIF target implosions driven by a dynamic screw pinch (DSP) demonstrate reduced MRTI feedthrough and greater fuel magnetization, resulting in improved thermonuclear performance and enhanced performance scaling with peak drive current. DSP drive enables additional scaling of the liner mass to increase liner radius but maintain implosion time, resulting in higher implosion velocities at the expense of increased susceptibility to MRTI. We present a current- and mass-scaled simulated DSP-MagLIF target implosion at the ∼ 40 MA peak current level that produces ignition scale performance, demonstrating a burn-averaged Lawson ignition parameter above unity and DT fusion yield above 1 MJ.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1985

Docking simulation analysis of range data requirements for the orbital maneuvering vehicle

The results of an initial study are reported assess the controllability of the Orbital Maneuvering Vehicle (OMV) for terminal closure and docking are reported. The vehicle characteristics used in this study are those of the Marshall Space Flight Center (MSFC) baseline OMV which were published with the request for proposals for preliminary design of this vehicle. This simulation was conducted at MSFC using the Target Motion Simulator. The study focused on the OMV manual mode capability to accommodate both stabilized and tumbling target engagements with varying complements of range and range rate data displayed to the OMV operator. Four trained test subjects performed over 400 simulated orbital dockings during this study. A firm requirement for radar during the terminal closure and dock phase of the OMV mission was not established by these simulations. Fifteen pound thrusters recommended in the MSFC baseline design were found to be advantageous for initial rate matching maneuvers with unstabilized targets; however, lower thrust levels were desirable for making the final docking maneuvers.

Micheal, J. D.↗
NASA NTRS1986

Simulation of cosmic irradiation conditions in thick target arrangements

One approach to simulate 2-pi irradiation conditions of planetary surfaces which has been widely applied in the past are bombardments of so called thick targets. A very large thick target was exposed recently to 2.1 GeV protons at the Bevatron-Bevalac in Berkeley. In a 100x100x180 cm steel-surrounded granodiorite target radioactive medium and high energy spallation products of the incident primary and of secondary particles were analyzed along the beam axis down to depths of 140 g/cm(2) in targets such as Cu, Ni, Co, Fe, T, Si, SiO2 and Al. Activities of these nuclides were exclusively determined via instrumental gamma-ray spectroscopy. Relative yields of neutron capture and spallation products induced in Co and Cu targets during the thick target bombardment are shown as a function of depth. The majority of the medium energy products such as Co-58 from Co targets exhibit a maximum at shallow depths of 40-60 g/cm(2) and then decrease exponentially. In a comparable 600 MeV proton bombarded thick target such a slight maximum for medium energy products was not observed. Rather, Co-58 activities in Co decreased steadily with the highest activity at the surface. The activities of the n-capture product Co-60 increase steadily starting at the surface. This indicates the rapidly growing flux of low energy neutrons within the target.

Theis, S.↗
NASA NTRS1986

Debugging tasked Ada programs

The applications for which Ada was developed require distributed implementations of the language and extensive use of tasking facilities. Debugging and testing technology as it applies to parallel features of languages currently falls short of needs. Thus, the development of embedded systems using Ada pose special challenges to the software engineer. Techniques for distributing Ada programs, support for simulating distributed target machines, testing facilities for tasked programs, and debugging support applicable to simulated and to real targets all need to be addressed. A technique is presented for debugging Ada programs that use tasking and it describes a debugger, called AdaTAD, to support the technique. The debugging technique is presented together with the use interface to AdaTAD. The component of AdaTAD that monitors and controls communication among tasks was designed in Ada and is presented through an example with a simple tasked program.

Fainter, R. G.↗
DOE OSTI2024

New Muon Campus Simulations for the Muon $g\textrm{-}2$ Experiment at Fermilab

The Muon $g\textrm{-}2$ Experiment (E989) at Fermilab conducted high-precision measurements of the muon anomalous magnetic moment $a_{\mu}$ using a storage ring from 2018 to 2023, achieving a remarkable precision of $200\:\mathrm{ppb}$ over Runs 1-3, with analyses for Runs 4-6 ongoing. A comprehensive understanding of the storage ring's beam dynamics and its accurate simulations are crucial for achieving the experiment's ambitious goals. One of the requirements for this effort is a very detailed knowledge of the phase space distribution of the beam. To address this requirement, we performed high-statistics simulations of the Muon $g\textrm{-}2$ Target Station (AP0) and the Muon Campus beamlines: M2 and M3, followed by the Delivery Ring, and then M4 and M5. The resulting muon distribution at the end of the M5 beamline from our previous $3\times10^{12}$ protons-on-target (PoT) simulation serves as an essential input for the storage ring simulations. In 2024, to facilitate the analyses of Runs 4-6, we have updated our Muon Campus models and re-optimised certain parameters to reflect the operational currents and wire chamber measurements of the beam. For these optimisations, we employed the heterogeneous island method, implemented in our evolutionary optimisation tool, glyfada. This key update addresses the need to use the best possible beam for the storage ring simulations and thus supports the experiment's overall precision. The Muon $g\textrm{-}2$ Experiment at Fermilab has successfully achieved its $70\:\mathrm{ppb}$ systematic uncertainty goal and collected 21 times more data than its predecessor at BNL. The updated and improved Muon Campus models and simulations not only facilitate the experiment's efforts to potentially resolve the current tension between experimental measurements and theoretical predictions of $a_{\mu}$, but also provide a basis for future simulations for the Mu2e Experiment (E-973), which utilises shared Muon Campus beamlines.

43 PARTICLE ACCELERATORS↗
NASA NTRS1993

Atlas IIAS ascent trajectory design for the SOHO mission

In 1995, an Atlas IIAS launch vehicle will loft the Solar and Heliospheric Observatory (SOHO) as part of the International Solar and Terrestrial Physics program. The operational phase of the SOHO mission will be conducted from a `halo orbit' about the Sun-Earth interior libration point. Depending on the time of the year of launch, the optimal transfer requires a parking orbit of variable duration to satisfy widely varying inertial targets. A simulation capability has been developed that optimizes the launch vehicle ascent and spacecraft transfer phases of flight together, subject to both launch vehicle and spacecraft constraints. It will be shown that this `ground-up' simulation removes the need for an intermediate target vector at Centaur upper stage/spacecraft separation. Although providing only a modest gain in deliverable satellite mass, this capability substantially improves the mission integration process by removing the strict reliance on near-Earth target vectors. Trajectory data from several cases are presented and future applications of this capability are also discussed.

Willen, Robert E.↗
NASA NTRS1985

Moving target, distributed, real-time simulation using Ada

Research on a precompiler solution is described for the moving target compiler problem encountered when trying to run parallel simulation algorithms on several microcomputers. The precompiler is under development at NASA-Lewis for simulating jet engines. Since the behavior of any component of a jet engine, e.g., the fan inlet, rear duct, forward sensor, etc., depends on the previous behaviors and not the current behaviors of other components, the behaviors can be modeled on different processors provided the outputs of the processors reach other processors in appropriate time intervals. The simulator works in compute and transfer modes. The Ada procedure sets for the behaviors of different components are divided up and routed by the precompiler, which essentially receives a multitasking program. The subroutines are synchronized after each computation cycle.

Collins, W. R.↗
NASA NTRS2005

Landmark navigation and target characterization in a simulated Itokawa encounter

A simulated asteroid Itokawa was constructed from Ostro's latest radar model adding craters, rocks and fractal surfacing. Images were constructed from this model with known spacecraft positions and orientations, and asteroid pole and shape as 'ground truth', using available values for the Hayabusa camera parameters, and following the proposed encounter scenario.

stereophotoclinometry↗