Search NASA⌕ Search

SEARCH · Search NASA

Results for “TENSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Broad sterile neutrinos & the reactor/gallium tension

Significant evidence exists for the apparent disappearance of electron-type neutrinos in radioactive source experiments. Yet, interpreted within the standard ‘3+1 sterile neutrino scenario’, precision short-baseline measurements of electron antineutrinos from nuclear reactors strongly disagree with these results. Recently, it has been demonstrated that allowing for a finite wavepacket size for the reactor neutrinos can ameliorate such a tension, however the smallness of the required wavepackets is a subject of intense debate. In this work, we demonstrate that a ‘broad’ sterile neutrino may relax this tension in much the same way. Such a phenomenological possibility can arise in plausible hidden sector scenarios, such as a clockwork-style sector, for which we provide a concrete microscopic model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Plastic deformation of single crystals of the equiatomic Cr-Mn-Fe-Co-Ni high-entropy alloy in tension and compression from 10 K to 1273 K

In this report the plastic deformation behavior of single crystals of the quinary, equiatomic Cr-Mn-Fe-Co-Ni high-entropy alloy (HEA) with the face-centered cubic structure has been investigated in tension and compression as a function of crystal orientation and temperature from 10 K to 1373 K. The critical resolved shear stress (CRSS) for {111}<110> slip at room temperature is 42-45 MPa. It does not depend much on crystal orientation (i.e., the Schmid law holds true) and the sense (tension vs. compression) of the applied load. The CRSS for {111}<110> slip increases with the decrease in temperature, without showing any significant inertia effects at cryogenic temperatures below 77 K. Extrapolation from the measured yield stresses down to 10 K yields a CRSS value at 0 K of 168 MPa. At cryogenic temperatures, the measured strain-rate sensitivity of flow stress is consistent with a very small activation volume. The concept of stress equivalence holds true both for the temperature dependence of CRSS and the stress dependence of activation volume, indicating that solid-solution hardening is the major strengthening mechanism. Deformation twinning occurs at 77 K but not at room temperature, resulting in higher tensile elongation to failure at 77 K than at room temperature. Deformation twinning at 77 K occurs at a shear stress of 378 MPa on conjugate ($\bar1\bar11$) planes in the form of Lüders deformation after large plastic strain (about 85%) achieved by the stage I (easy glide) and stage II (linear work-hardening) deformation.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Development of a variable tensioning system to reduce separation force in large scale stereolithography

Projection micro stereolithography (PµSL) is an additive manufacturing tool that offers multiple advantages, including unparalleled resolution and throughput, but the ability to print high viscosity resin for large-scale parts is limited. One of the key challenges in PµSL is to separate a newly polymerized layer from the vat floor without damaging the part. Since the separation force scales with the printing area, the risk of damaging the part increases significantly with larger-scale systems and must be addressed. In this paper, a novel roll-to-roll, variable tensioning system is proposed to reduce the separation force during printing. A mathematical model is proposed to predict the separation force for different 2D geometries, and a set of experiments is conducted on an experimental prototype to validate the model. Finally, the effects of different separation parameters including peel rate and peel angle are discussed in detail. The results show that the proposed tensioning system reduces the separation force significantly.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Energy absorption of architectured PrintCast interpenetrating composites in tension

Additively manufactured (AM) metal-metal composites consisting of PrintCasted 316 L austenitic stainless-steel lattice structures infiltrated with A356 casting alloy, have recently been developed for use in high energy absorption systems with potential applications ranging from static load bearing to dynamic blast containment structures. This system has a unique mechanical behavior as the volume fraction of lattice increases showing a transition from localized to de-localized failure and dramatic increase in energy absorption capability. In this work, PrintCast A356/316 L composite tensile specimens were produced with lattice volume fractions ranging from 20 % to 50 % to capture the range of this behavior. Finite element simulations support neutron diffraction measurements of stress state. Results illustrate that in tension, the reinforcement material is in tension while the matrix support material is in compression, information offering significant insight into the transition to de-localized failure. Moreover, the simulation results provide further insight into how interfacial bonding (or lack of bonding) affects the energy absorption capabilities of the PrintCast composites.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Intrinsic size dependent plasticity in BCC micro-pillars under uniaxial tension and pure torsion

The mechanical behavior of submicron body-centered cubic (BCC) micro-pillars is investigated by three-dimensional dislocation dynamics (DD) simulations to better understand the governing mechanisms for size dependent plasticity under uniaxial tension and pure torsion. A formula is developed to compute the incremental plastic twist due to dislocation motion in DD simulations. The DD simulations show that different dislocation microstructures are created depending on the loading conditions, which leads to different size dependent mechanical behavior. While in tension plasticity is mainly governed by the kinetics of dislocation motion controlled partly by the surface dislocation sources, plastic flow in torsion is controlled by dislocation pile-ups associated with strain gradients. The simulation results also reveal a Bauschinger effect and plastic recovery under cyclic twist, which have been observed in recent experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Crystal plasticity modeling of strain-induced martensitic transformations to predict strain rate and temperature sensitive behavior of 304 L steels: Applications to tension, compression, torsion, and impact

This paper advances crystallographically-based Olson-Cohen (direct γ → α’) and deformation mechanism (indirect γ→ε→α’) phase transformation models for predicting strain-induced austenite to martensite transformation. Here, the advanced transformation models enable predictions of not only strain-path sensitive, but also of strain-rate and temperature sensitive deformation of polycrystalline stainless steels (SSs). The deformation of constituent grains in SSs is modeled as a combination of anisotropic elasticity, crystallographic slip, and phase transformation, while the hardening is based on the evolution of dislocation density and explicit shifts in phase fractions. Such grain-scale deformation is implemented within the meso-scale elasto-plastic self-consistent (EPSC) homogenization model, which is coupled with the implicit finite element (FE) method to provide a constitutive response at each FE integration point for solving boundary value problems at the macro-scale. Parameters pertaining to the hardening and transformation models within FEEPSC are calibrated and validated on a suite of data including flow curves and phase fractions for monotonic compression, tension, and torsion as a function of strain-rate and temperature for wrought and additively manufactured (AM) SS304L. To illustrate the potential and accuracy of the integrated multi-level FE-EPSC simulation framework, geometry, mechanical response, phase fractions, and texture evolution are simulated during gas-gun impact deformation of a cylinder and quasi-static tension of a notched specimen made of AM SS304L. Details of the simulation framework, comparison between experimental and simulation results, and insights from the results are presented and discussed.

304L steels↗
DOE OSTI2022

Porosity evolution under increasing tension in wire-arc additively manufactured aluminum using in-situ micro-computed tomography and convolutional neural network

Internal defects such as porosities are often formed in additively manufactured metal components. The pores nucleate, grow, and coalesce to form cracks under loads, leading to eventual catastrophic failure. Here, in this paper, the full-field porosity evolution, including pore growth and coalescence in a wire-arc additively manufactured (WAAM) aluminum alloy cylinder under tension is observed with in-situ X-ray micro-computed tomography (μCT). The pore size distribution, density, and tensile stress are calculated from the volumetric images analyzed by a convolutional neural network (CNN) algorithm, which provides rapid analysis of 12,950 slice images from μCT volumetric images at the reference state and 13 tensile strains. The results show the quantitative evolution of the growth and coalescence of macropores under tension. A strong correlation is found between the local pore volume fraction and the true tensile stress when the tensile strain is larger than 5%.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Warm Decaying Dark Matter and the Hubble Tension

If a fraction of the dark matter is unstable and decays into dark radiation at around the time of matter-radiation equality, it could impact the expansion history of the universe in a way that helps to ameliorate the long-standing tension between the locally measured value of the Hubble constant and the value inferred from measurements of the cosmic microwave background and baryon acoustic oscillations (assuming standard ΛCDM cosmology). If this component of decaying dark matter is cold, however, it will modify the evolution of the gravitational potentials, leading to inconsistencies with these same data sets. With this in mind, we consider here a component of decaying warm dark matter, with a free-streaming length that is long enough to remain consistent with existing data. We study the background and perturbation evolution of warm decaying dark matter, and use cosmological data to constrain the mass, abundance and decay rate of such a particle. We find that a component of warm decaying dark matter can significantly reduce the tension between local and cosmological determinations of the Hubble constant.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Lensinglike tensions in the Planck legacy release

We analyze the final release of the Planck satellite data to constrain the gravitational lensing potential in a model-independent manner. The amount of lensing determined from the smoothing of the acoustic peaks in the temperature and polarization power spectra is 2σ too high when compared with the measurements using the lensing reconstruction and 2.8σ too high when compared with Λ CDM expectation based on the "unlensed" portion of the temperature and polarization power spectra. The largest change from the previous data release is the Λ CDM expectation, driven by improved constraints to the optical depth to reionization. Here, the anomaly still is inconsistent with actual gravitational lensing, given that the lensing reconstruction constraints are discrepant independent of the model. Within the context of Λ CDM, improvements in its parameter constraints from lensing reconstruction bring this tension to 2.1σ and from further adding baryon acoustic oscillation and Pantheon supernova data to a marginally higher 2.2σ. Once these other measurements are included, marginalizing this lensing-like anomaly cannot substantially resolve tensions with low-redshift measurements of H 0 and S 8 in Λ CDM, Λ CDM + N eff or ΛCDM + Σm ν ; furthermore the artificial strengthening of constraints on Σm ν is less than 20%.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Non-Gaussian estimates of tensions in cosmological parameters

We discuss how to efficiently and reliably estimate the level of agreement and disagreement on parameter determinations from different experiments, fully taking into account non-Gaussianities in the parameter posteriors. We develop two families of scalable algorithms that allow us to perform this type of calculations in increasing number of dimensions and for different levels of tensions. One family of algorithms rely on kernel density estimates of posterior distributions while the other relies on machine learning modeling of the posterior distribution with normalizing flows. We showcase their effectiveness and accuracy with a set of benchmark examples and find both methods agree with each other and the true tension within 0.5σ in difficult cases and generally to 0.2σ or better. This allows us to study the level of internal agreement between different measurements of the clustering of cosmological structures from the Dark Energy Survey and their agreement with measurements of the Cosmic Microwave Background from the Planck satellite.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Chameleon early dark energy and the Hubble tension

Early dark energy (EDE) offers a particularly interesting theoretical approach to the Hubble tension, albeit one that introduces its own set of challenges, including a new “why then” problem related to the EDE injection time at matter-radiation equality, and a mild worsening of the large-scale structure (LSS) tension. Both these challenges center on the properties of dark matter, which becomes the dominant component of the Universe at EDE injection and is also responsible for seeding LSS. Driven by this, we present the potential of couplings between EDE and dark matter to address these challenges, focusing on a mechanism similar to chameleon dark energy theories, deeming this chameleon early dark energy (CEDE). We present relevant background and perturbation equations and study the dynamics of the case of a quartic scalar potential and an exponential coupling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Decay of multiple dark matter particles to dark radiation in different epochs does not alleviate the Hubble tension

Decaying cold dark matter (CDM) has been considered as a mechanism to tackle the tensions in the Hubble expansion rate and the clustering of matter. However, polarization measurements of the cosmic microwave background (CMB) severely constrain the fraction of dark matter decaying before recombination, and lensing of the CMB anisotropies by large-scale structure sets strong constraints on dark matter decaying after recombination. Together, these constraints make an explanation of the Hubble tension in terms of decaying dark matter unlikely. In response to this situation, we investigate whether a dark matter ensemble with CDM particles decaying into free streaming dark radiation in different epochs can alleviate the problem. We find that it does not.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Mirror dark sector solution of the Hubble tension with time-varying fine-structure constant

Here we explore a model introduced by Cyr-Racine et al. that resolves the Hubble tension by invoking a “mirror world” dark sector with energy density a fixed fraction of the “ordinary” sector of Λ+ cold dark matter. Although it reconciles cosmic microwave background and large-scale structure observations with local measurements of the Hubble constant, H 0 , the model requires a value of the primordial helium mass fraction, Y p = 0.170 ± 0.025, that is discrepant with observations and with the predictions of big bang nucleosynthesis. We consider a variant of the model with standard helium mass fraction but with the value of the electromagnetic fine-structure constant, α, slightly different during photon decoupling from its present value. If α at that epoch is lower than its current value by Δα ≃ -2 x 10 -5 , then we can achieve the same Hubble tension resolution as in the work by Cyr-Racine et al. but with consistent helium abundance. As an example of such time evolution of α, we consider a toy model of an ultralight scalar field, with mass m < 4 x 10 -29 eV, coupled to electromagnetism, which evolves after photon decoupling at redshift z ≃ 10 3 , and that with appropriate coupling appears to be consistent with late-time constraints on α variation and the weak equivalence principle.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Quintessential cosmological tensions

Several cosmological tensions have emerged in light of recent data, most notably in the inferences of the parameters and . We explore the possibility of alleviating both these tensions simultaneously by means of the Albrecht-Skordis “quintessence” potential. The field can reduce the size of the sound horizon while concurrently suppressing the power in matter density fluctuations before it comes to dominate the energy density budget today. Interestingly, this rich set of dynamics is governed entirely by one free parameter that is of in Planck units. We find that the inferred value of can be increased, while that of can be decreased, both by compared to the case. However, ultimately the model is disfavored by Planck and BAO data alone, compared to the standard model, with a . When including large scale structure and supernova data we find . We note that historically much attention has been focused on preserving the three angular scales , , and to their values. Our work presents an example of how, while doing so indeed maintains a relatively good fit to the cosmic microwave background data for an increased number of ultrarelativistic species, it is a priori insufficient in maintaining such a fit in more general model spaces.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Superhorizon isocurvature fluctuations relax tensions

Here, we present a new class of models that have potential to alleviate tensions present in the cosmological data today. We postulate about variation in the sound horizon scale on superhorizon scales, i.e., on scales that are larger than that of the present observable low-redshift Universe (≳ 1Gpc) while at the same time smaller than the largest scales probed by the cosmic microwave background (CMB) (≲ 10Gpc). In this scenario, CMB peaks are naturally smoothed as preferred by the Planck data, while at the same time the low-redshift baryon acoustic oscillation calibration is partially decoupled from the CMB. Taking superhorizon variations in baryon fraction as an example and using approximate modeling, we find improvement in the best fit Planck power spectrum model Δχ 2 ~ 6 for 1 extra degree of freedom with the relevant extension parameter 10 3 σ b = 2.10 ± 0.60, implying about 10% variations in baryon fraction across the Universe. At the same time, S 8 drops by about 1 sigma, easing tension with weak lensing surveys. We find that the combination of Planck 2018 data, eBOSS BAO data, and Riess et al. distance ladder Hubble parameter determination produce a satisfactory fit in our model if we allow for a phantom dark energy equation of state.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Assessing the theory-data tension in neutrino-induced charged pion production: the effect of final-state nucleon distortion

Pion production on nuclei constitutes a significant part of the total cross section in experiments involving few-GeV neutrinos. Combined analyses of data on deuterium and heavier nuclei points to tensions between the bubble chamber data and the data of the MINER$\nu$A experiment, which are often ascribed to unspecified nuclear effects. To understand the origin of these tensions, a microscopic quantum mechanical framework is needed to compute nuclear matrix elements. We use the local approximation to the relativistic distorted wave impulse approximation (RDWIA) to assess the role of final-state nucleon distortion. To perform this comparison under conditions relevant to neutrino experiments, we compute cross sections for the MINER$\nu$A and T2K charged pion production datasets. The inclusion of nucleon distortion leads to a reduction of the cross section up to 10%, but to no significant change in shape of the flux-averaged cross sections. Results with and without distortion compare favorably to experimental data, with the exception of the low-$Q^2$ MINER$\nu$A $\pi^+$ data. We point out that hydrogen target data from BEBC is also overpredicted at low-$Q^2$, and that the discrepancy is similar in shape and magnitude to what is found in comparison to MINER$\nu$A data. Including nucleon distortion alone cannot explain the overprediction of low-$Q^2$ cross sections measured by MINER$\nu$A. The similar overprediction of BEBC data on hydrogen means that it is impossible to ascribe this discrepancy solely to a nuclear effect. Axial couplings and their $Q^2$ dependence should ideally be derived from more precise data on hydrogen and deuterium.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Cyclic bend over sheave performance of a steel tension member belt for wave energy conversion

Rotary power take-offs (PTOs) promise many benefits for commercial wave energy converters (WECs), including longer power strokes/reduced end-stop concerns, deployment advantages, and controllability. However, these winch-type PTOs can impose millions of bending cycles on the belt or rope element every year, which may lead to a failure mode known as Cyclic Bend Over Sheave, or “CBOS”. Synthetic rope, though attractive due to its high strength, low elongation, and durability, suffers from comparatively poor CBOS performance and struggles to reach a million load cycles without failing. Using belts instead of ropes for winching elements should improve CBOS performance due to having a smaller thickness that undergoes bending. Unfortunately, belts have their own host of problems. Maintaining even tension across the width of a belt subject to twist or fleet angles is a challenge, especially for WECs which can move in all 6 degrees of freedom in the ocean. This study sought to quantify the CBOS performance of a belt constructed of steel tension members in a polyurethane matrix containing longitudinal profiles. Belt samples were tested to failure or up to two million bend-unbend cycles and subject to a range of fleet angles. This paper summarizes the utilized testing methodology and the resulting belt performance.

16 TIDAL AND WAVE POWER↗
DOE OSTI2023

Evaluation of the ring tension test (RTT) for robust determination of material strengths

The ring tension test (RTT) is an experimental method for determining mechanical behavior in a material’s circumferential or hoop direction. It is a crucial test for testing anisotropic materials with tube geometry, such as nuclear fuel cladding or irradiated pipes. Several RTT configurations exist, each with their own advantages and disadvantages. However, this test is significantly more complex than traditional tensile testing and can be especially sensitive to small differences and inconsistencies in the test setup and geometry, ultimately affecting the derived mechanical properties. Previous research has focused on method development, and little work has been done on understanding the subtle differences between an ideal test and experiments, specifically when the tests are performed on highly irradiated materials in hot cells. In this work, a finite element-based investigation of the RTT is conducted to fill this gap. The two most used test configurations are investigated, comparing their ability to determine accurate material strengths through plastic deformation. Several non-ideal conditions and uncontrollable effects which are likely to occur during experimental testing such as machining tolerances, variations of specimen geometry from nominal dimensions, rotation of specimens and fixturing, and other test setup discrepancies are studied. The sensitivity of measured strengths to these conditions is presented. A mechanics-based approach to describing and correcting raw data to determine actual strengths is also included for one of the configurations, resulting in a robust correction method with highly accurate material strength measurements. Finally, based on these analyses, the hemicylindrical mandrel configuration is recommended with a gauge region oriented at a 45° angle.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗