Search NASA⌕ Search

SEARCH · Search NASA

Results for “TERMINAL GUIDANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Mission design for a ballistic slow-flyby of comet Encke 1980

Preliminary mission analyses for a proposed 1980 slow flyby (7 to 9 km/sec) of comet Encke are presented. Among the topics covered are: science objectives, Encke's physical activity and ephemeris accuracy, trajectory and launch-window analysis, terminal guidance, and spacecraft concepts. The nominal mission plan calls for a near-perihelion intercept with two spacecraft using a single launch vehicle. Both spacecraft arrive at the same time, one passing within 500 km from Encke's nucleus on its sunward side, the other cutting through the tail region. By applying a small propulsive correction about three weeks after the encounter, it is possible to retarget both spacecraft for a second Encke intercept in 1984. The potential science return from the ballistic slow flyby is compared with other proposed mission modes for the 1980 Encke flyby mission including the widely advocated slow flyby using solar-electric propulsion. It is shown that the ballistic slow flyby is superior in every respect.

Farquhar, R. W.↗

Mission design for a ballistic slow flyby Comet Encke 1980

Preliminary mission analyses for a proposed 1980 slow flyby (7-9 km/s) of comet Encke are presented. Among the topics covered are science objectives, Encke's physical activity and ephemeris accuracy, trajectory and launch-window analysis, terminal guidance, and spacecraft concepts. The nominal mission plan calls for a near-perihelion intercept with two spacecraft launched on a single launch vehicle. Both spacecraft will arrive at the same time, one passing within 500 km from Encke's nucleus on its sunward side, the other cutting through the tail region. By applying a small propulsive correction about three weeks after the encounter, it is possible to retarget both spacecraft for a second Encke intercept in 1984. The potential science return from the ballistic slow flyby is compared with other proposed mission modes for the 1980 Encke flyby mission, including the widely advocated slow flyby using solar-electric propulsion. It is shown that the ballistic slow flyby is superior in every respect.

Farquhar, R. W.↗

Research in ground-based near-terminal area 4D guidance and control

This paper describes work being done at NASA, Langley Research Center and at the Research Triangle Institute on advanced, ground-based guidance and control for the near terminal area. Large-scale computer traffic simulations in conjunction with flight experiments with a Boeing 737 aircraft will be used to evaluate various concepts for automated terminal area metering and spacing. The all-digital real-time air traffic simulation model is described. Facilities for aircraft tracking and for interfacing the aircraft with the digital simulation are discussed, along with possible application to other types of experiments.

Britt, C. L., Jr.↗

A piloted simulation of V/STOL landings aboard a non-aviation ship

A lift fan simulation program was conducted to examine V/STOL handling qualities and operational problems, to find solutions to high pilot workload problem areas, and to simulate terminal guidance and control of a landing on a nonaviation ship. Piloting aids evaluated include an advanced attitude control system, a decoupled flight path control system, and an integrated head-up display. Results are discussed from a pilot's point of view with emphasis on reduction of pilot workload during V/STOL aircraft recoveries at sea.

Gerdes, R. M.↗

Adaptive control of a robotic manipulator

A control hierarchy for a robotic manipulator is described. The hierarchy includes perception and robot/environment interaction, the latter consisting of planning, path control, and terminal guidance loops. Environment-sensitive features include the provision of control governed by proximity, tactile, and visual sensors as well as the usual kinematic sensors. The manipulator is considered as part of an overall robot system. 'Adaptive control' in the present context refers to both the hierarchical nature of the control system and to its environment-responsive nature.

Lewis, R. A.↗

A variable optical target simulator

A crucial experiment, relative to determining the ability of an imaging seeker to track a target and generate accurate terminal guidance, requires an optical device which can provide imagery that grows in size as a real-time estimate of true missile flight conditions. The basic components of an Optical Contrast TV Imaging Seeker are reviewed to establish the need for an optical target simulator. An optomechanical device called a Variable Optical Target Simulator (VOTS) which generates end game scene situations is discussed. The organization of optical components and their control for providing an image which grows in size as a linear estimate of real world situations is presented.

Kulas, C. E.↗

Air Force research in optical processing

Optical and optical electronic hybrid processing especially in the application area of image processing are emphasized. Real time pattern recognition processors for such airborne missions as target recognition, tracking, and terminal guidance are studied.

Neff, J.↗

Mars exploration in the 1990's

Science objectives for a Mars exploration program in the 1990s, set forth by NASA's Committee on Planetary Exploration, are presented. They include: an intensive study of the Martian surface, the exploration of the structure and general circulation of the atmosphere, the exploration of the nature and dynamics of the planet's interior, the nature of Mars's magnetic field, the character of the upper atmosphere and its interaction with the solar wind, and the establishment of the global chemical and physical characteristics of the Martian surface. Several low cost missions, which have been suggested by the Committee for NASA's CORE program, such as the Mars Geoscience Climatology Observer, the Mars Aeronomy Orbiter, and the Mars Surface Network and Surface Probing missions are also covered. Direct Entry-Direct Return and Out-of-Orbit Entry-Orbital Rendezvous and Docking are two versions of a Mars Rover and Sample Return (MRSR) mission discussed in detail. It is concluded that a MRSR mission will require the combination of full Centaur capability, aerocapture at Mars and earth, and direct return to earth to meet major scientific goals. Further studies should be made in orbit assembly, fuel transfer technology, aeromaneuvering, terminal guidance, rover technology, and robotics.

Albee, A. L.↗

Trajectory design and navigation analysis for Cargo Transfer Vehicle proximity operations

The paper documents an investigation of alternative (or off-nominal) final approach trajectories and terminal guidance algorithms for Cargo Transfer Vehicle (CTV) automated rendezvous and proximity operation in the vicinity of Space Station Freedom (SSF). Ten candidate trajectory designs, representing a survey of all approaches that reasonably satisfy the mission constraints, are compared qualitatively and quantitatively. It is shown that several fundamentally different types of approach strategies are feasible in the CTV application and enjoy more favorable passive collision avoidance and plume impingement properties than the nominal. They are, however, generally more costly in propellant. The extent to which an alternative approach is more costly is determined largely by the abort (or specifically the 'hold' or 'wave-off') requirements. These approach techniques are verified in a software simulation using a parametrically defined candidate navigation system, and proximity sensor accuracy requirements are derived.

Marsh, S. M.↗

Observing Campaign for Potential Deep Impact Flyby Target 163249 (2002 GT)

The Deep Impact spacecraft is currently on course for a Jan. 4, 2020 flyby of the sub-kilometer near-Earth asteroid 163249 (2002 GT). The re-targeting will be complete with a final small maneuver scheduled for Oct. 4, 2012. 2002 GT, which is also designated as a Potentially Hazardous Asteroid (PHA), has a well-determined orbit and is approx 800 m in diameter (H=18.3). Little more is known about the nature of this object, but in mid-2013 it will pass near the Earth, affording an exceptional opportunity for ground-based characterization. At this apparition 2002 GT will be in range of Arecibo. In addition to Doppler measurements, radar delay observations with precisions of a few microseconds are expected and have a good chance of revealing whether the system is binary or not. The asteroid will be brighter than 16th mag., which will facilitate a host of observations at a variety of wavelengths. Light curve measurements across a wide range of viewing perspectives will reveal the rotation rate and ultimately lead to strong constraints on the shape and pole orientation. Visible and infrared spectra will constrain the mineralogy, taxonomy, albedo and size. Along with the radar observations, optical astrometry will further constrain the orbit, both to facilitate terminal guidance operations and to potentially reveal nongravitational forces acting on the asteroid. Coordinating all of these observations will be a significant task and we encourage interested observers to collaborate in this effort. The 2013 apparition of 2002 GT represents a unique opportunity to characterize a potential flyby target, which will aid interpretation of the high-resolution flyby imagery and aid planning and development of the flyby imaging sequence. The knowledge gained from this flyby will be highly relevant to the human exploration program at NASA, which desires more information on the physical characteristics of sub-kilometer near-Earth asteroids.

Pittichova, Jana↗

Conceptual Design of a Hypervelocity Asteroid Intercept Vehicle (HAIV) Flight Validation Mission

In this paper we present a detailed overview of the MDL study results and subsequent advances in the design of GNC algorithms for accurate terminal guidance during hypervelocity NEO intercept. The MDL study produced a conceptual con guration of the two-body HAIV and its subsystems; a mission scenario and trajectory design for a notional flight validation mission to a selected candidate target NEO; GNC results regarding the ability of the HAIV to reliably intercept small (50 m) NEOs at hypervelocity (typically greater than 10 km/s); candidate launch vehicle selection; a notional operations concept and cost estimate for the flight validation mission; and a list of topics to address during the remainder of our NIAC Phase II study.

Barbee, Brent W.↗

Deflection Missions for Asteroid 2011 AG5

The recently discovered asteroid 2011 AG5 currently has a 1-in-500 chance of impacting Earth in 2040. In this paper, we discuss the potential of future observations of the asteroid and their effects on the asteroid's orbital uncertainty. Various kinetic impactor mission scenarios, relying on both conventional chemical as well as solar-electric propulsion, are presented for deflecting the course of the asteroid safely away from Earth. The times for the missions range from pre-keyhole passage (pre-2023), and up to five years prior to the 2040 Earth close approach. We also include a brief discussion on terminal guidance, and contingency options for mission planning.

small body↗

Double Asteroid Redirection Test (DART) Phase D Mission Design & Navigation Analysis

NASA’s Double Asteroid Redirection Test (DART) mission is the first demonstration of kinetic deflection of an asteroid. DART uses terminal guidance to impact Dimorphos, which orbits Didymos, during its 2022 close-approach to Earth. The close range to Earth allows Earth-based observations to reconstruct the impact’s effect. Light-curve data will be used to measure the resulting change in orbit period of Dimorphos due to the momentum change associated with the impact experiment. This paper describes the current DART trajectory and recent Mission Design and Navigation analysis preparing for launch.

Velez, Dianna↗

MSL EDL Entry Guidance using the Entry Terminal Point Controller

The Mars Science Laboratory will be the first Mars mission to attempt a guided entry with the objective of safely delivering the entry vehicle to a survivable parachute deploy state within 10 km of the pre-designated landing site. The Entry Terminal Point Controller guidance algorithm is derived from the final phase Apollo Command Module guidance and, like Apollo, modulates the bank angle to control range based on deviations in range, altitude rate, and drag acceleration from a reference trajectory. For application to Mars landers which must make use of the tenuous Martian atmosphere, it is critical to balance the lift of the vehicle to minimize the range while still ensuring a safe deploy altitude. An overview of the process to generate optimized guidance settings is presented, discussing improvements made over the last four years. Performance tradeoffs between ellipse size and deploy altitude will be presented, along with imposed constraints of entry acceleration and heating. Performance sensitivities to the bank reversal deadbands, heading alignment, attitude initialization error, and atmospheric delivery errors are presented. Guidance settings for contingency operations, such as those appropriate for severe dust storm scenarios, are evaluated.

Source record↗

Flight performance of the TCV B-737 airplane at Kennedy Airport using TRSB/MLS guidance

The terminal configured vehicle (TCV) B 737 was flown in demonstration of the time reference scanning beam/microwave landing system (TRSB/MLS). The flight performance of the TCV airplane during the demonstration automatic approaches and landings while utilizing TRSB/MLS guidance is reported. The TRSB/MLS is shown to provide the terminal area guidance necessary for flying curved automatic approaches with short finals.

White, W. F.↗

A flight investigation of a terminal area navigation and guidance concept for STOL aircraft

A digital avionics system was installed in the CV-340 transport aircraft. Flight tests were made to obtain preliminary performance data in the manual flight director mode using time controlled guidance. These tests provide a basis for selection of terminal area guidance, navigation, and control system concepts for short haul aircraft and for investigating operational procedures.

Smith, D. W.↗

Discrete optimal control approach to a four-dimensional guidance problem near terminal areas

Description of a computer-oriented technique to generate the necessary control inputs to guide an aircraft in a given time from a given initial state to a prescribed final state subject to the constraints on airspeed, acceleration, and pitch and bank angles of the aircraft. A discrete-time mathematical model requiring five state variables and three control variables is obtained, assuming steady wind and zero sideslip. The guidance problem is posed as a discrete nonlinear optimal control problem with a cost functional of Bolza form. A solution technique for the control problem is investigated, and numerical examples are presented. It is believed that this approach should prove to be useful in automated air traffic control schemes near large terminal areas.

Nagarajan, N.↗