Search NASA⌕ Search

SEARCH · Search NASA

Results for “TGA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Characterization and effects of impurities on carbonate quantification in heterogenous matrices

Mineral carbonation simulates a natural weathering phenomena by breaking down silicates and oxides to form Ca & Mg carbonates. Various mineralization methods have been demonstrated as a potential technique to improve the quality of slags and tailings through neutralization and stabilization of problematic species to yield a product better suited for use in concrete. This study aims to characterize, quantify and analyze carbonates in various carbonated products such as mineralized CaCO 3 , CO 2 mineralized Steel Slags and Mine Tailings. More than 10 samples were analyzed for carbonate measurement and verification from industrial and academic partners that pioneer commercial CO 2 mineralization technologies. The samples were characterized primarily by using X-ray diffraction (XRD), Thermogravimetric Analyses (TGA), and Scanning Electron Microscopy (SEM) to gain insights into CaCO 3 content. A baseline characterization of lab-grade CaCO 3 and MgCO 3 also revealed important considerations for CaCO 3 measurement using TGA alone. The experiments using synthetic lab-grade samples also revealed that the presence of MgCO 3 /MgO can accelerate the decomposition of CaCO 3 and thus can affect measurement parameters. Lab-grade CaCO 3 samples dosed into steel slag and mine tailing also showed significant deviation in their decomposition behavior. These insights are used to inform the development of a standardized protocol for the measurement and verification of carbonate-bearing products.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Comparison of Irradiated and Unirradiated Graphite Oxidation Performance

This work examines the oxidation behavior of NBG-25 graphite using irradiated specimens and (not irradiated) companion specimens from the Advanced Graphite Creep (AGC) Experiment. Irradiated and companion specimens were quartered, split into four small samples, to enable four oxidation test runs for each (0.5 inch diameter by 0.25 inch tall) piggyback button obtained from the AGC Experiment inventory. These split samples were oxidized in air in a thermogravimetric analyzer (TGA) and benchmarked against observations with separately sourced same-grade specimens of three geometries oxidized either in the TGA or in a vertical furnace built and operated to satisfy the specifications of ASTM D7542. The study considers both irradiation damage and relief of damage by thermal annealing. A range of isothermal oxidation temperatures were tested for specimens exposed to a similar irradiation environment, nominally 6.5 dpa at 650°C. To assess the dose dependency of observed oxidation behavior, specimens with a range of irradiation exposures (up to 6.8 dpa) were tested at the single oxidation temperature of 650°C. In the conventional analysis (rate determined over the 5-10% mass loss range) any annealing effects appear to be negligible, while irradiation to ~6.5 dpa may double or triple the subsequent oxidation rate. However, examination of rate with extent of reaction (over incremental ranges from initial onset up to 5% mass loss) illustrates that (at least for ~6.5 dpa) irradiation initially inhibits oxidation. Slower rates of oxidation than companion split samples are clearly indicated across all oxidation temperatures tested up to ~0.5% mass loss. Over the range of 0.5-1% mass loss, regardless of normalization strategy, there is no statistically meaningful difference in oxidation rate. However, beyond 0.5% mass loss oxidation of the irradiated sample becomes progressively faster than the companion sample (up to the 10% mass loss level observed).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Drying Spent Magnox Fuel for Interim Dry Storage

Spent Magnox fuel is usually stored under water for shielding and cooling following use in-reactor, but the storage water can react with Magnox clad fuel and cause corrosion and forms a sludge which generates a secondary waste product. One option to prevent unwanted corrosion and avoid expensive waste management is to dry the wet fuel. This project aims to test a drying process which will convert wet and corroded Magnox fuel to a stable form to demonstrate viability for conversion from wet to dry storage. Samples of corroded Magnox supplied by National Nuclear Laboratory. Corrosion product retrieved by various methods including dry scraping, ultrasonic treatment to form sludge and sludge drying to isolate suspension. TGA undertaken on Sample 1 and Sample 2, with brucite and hydromagnesite for comparison. Both samples showed ∼10% mass loss up to 250 deg. C attributable to water held in sample. Mass loss from dehydroxylation which liberates further water in both samples. TGA data plotted alongside chemically pure brucite and hydromagnesite shows expected similarities/differences between Sample 1(mostly brucite) and Sample 2 (brucite/hydromagnesite mixture). Following treatment, dried samples observed to slowly gain mass in ambient conditions. Presumed to be hygroscopic absorption of air water vapour as effect is reversible, with similar effect observed for hydromagnesite and brucite. Etched Magnox vacuum dried for 3.5 h at 90 deg. C to test for reaction with residual water - some discoloration but no noticeable corrosion observed. Drying etched Magnox metal to observe surface effects/corrosion during drying process.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Analysis of Material Properties of Aged Rigid Polyurethane Foam

Foams are classified as either rigid or flexible and are commonly used in applications such as pipe insulation, carpet fibers, and chair foam cushions. Polyurethane foams are excellent thermal insulators, have excellent mechanical properties, and are chemically inert. With the addition of fire protective additives, polyurethane foams have the ability to intumescence when exposed to high temperatures. For the future storage of the 9977 nuclear shipping packages, the material properties of the General Plastics 3716 rigid polyurethane foam were evaluated for long term performance by comparing aged samples to unaged samples. General Plastics 3716 rigid polyurethane foam was aged from November 2014 to June 2019 at varying temperatures of: 160 deg. F, 160 deg. F + 50% relative humidity (RH), 185 deg. F, 215 deg. F, and 250 deg. F. The foam was then analyzed via Fourier Transform Infrared Spectroscopy (FTIR), 3D Optical Microscope, Thermal Gravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC). FTIR and Optical Microscope: No significant change to chemical or physical structure was evident by FTIR or optical microscope analysis. DSC: Decrease of heat capacity over time for all oven temperatures except a slight increase for the 185 deg. F conditioned foams. Largest decrease evident with foams conditioned at 250 deg. F. A slight increase in heat capacity for humid samples. Similar trends in heat capacities at 71 deg. C and 102 deg. C. TGA: As conditioning temperature increased, a decline was evident in the average percent weight loss, onset temperature, and first derivative peak temperature. No significant effect due to humidity except for a decrease in first derivative peak temperature. Unaged samples exhibited strong intumescence. Foams conditioned at 160 deg. F exhibited slight intumescence. Results suggest fire protective additives decomposed at higher temperatures, which contributed to a lower average percent mass loss in higher temperature conditioning. Further thermal degradation testing would be beneficial to evaluate the ability of the conditioned foams to intumesce. Evaluate irradiation dose rate effects on conditioned foam. Possible conditioning in an environment with a known humidity or analyzing a new aliquot of sample for each trial to achieve a more representative heat capacity calculation.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Drying Wet Stored and Corroded Magnox Fuel for Interim Dry Storage - 20187

To investigate the feasibility of drying corroded Magnesium alloy clad nuclear fuel, the corrosion products of inactive and unirradiated Magnox simulant dry corrosion product and dried corroded Magnox sludge were characterised by X-ray diffraction and thermogravimetric analysis. XRD identified brucite in the dried corrosion product and both brucite and hydromagnesite in the sludge. TGA identified mass loss on dehydration of ∼9.1% up to 250 deg. C and 27.9% from dehydroxylation up to 440 deg. C, with total mass loss of 41.9% up to 800 deg. C for the dried corrosion product. The sludge TGA showed 8.3% mass loss up to 250 deg. C from dehydration, 7.5% up to 330 deg. C from dehydroxylation and 31.4% mass loss up to 47.2% for decarbonation, with total mass loss of 49.2% up to 800 deg. C. Water removal up to 1.8 g was performed by cold vacuum drying (40 deg. C-120 deg. C) on a ≅14.8 g (wet) corroded Magnox sample. The process was monitored by observing pressure, dew point, temperature and gas flow changes supported by measuring the sample mass loss as water is removed. From these tests, it was observed that the dried corroded Magnox displayed some hygroscopic capacity which has implications for water retention following vacuum drying and the length of exposure required to achieve the desired dryness. Whilst at higher temperatures the water was removed faster, the increased temperature also risks the fuel cladding undergoing unwanted chemical reactions with the residual water during the process. However, at lower temperatures the achievable levels of dryness were reduced. Therefore, from these observations this work has identified that there is a temperature balance that may be necessary to optimise the drying process with respect to allowing the greatest level of dryness whilst restricting unwanted chemical reactions. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Synthesizing, Compounding, and Characterizing a Heat Labile Polyurethane Foam

ABSTRACT A need exists for a packaging foam material that can be converted from solid to gaseous degradation products at reasonably low energy levels or temperatures, such as 100O C. This paper will primarily discuss the approaches currently being used to synthesize and characterize such a material. These approaches include the incorporation of novel polyols such as azo containing diols, polycarbonate diols, and polypropylene carbonate polyols into polyurethane foams. Characterization methods include NMR, FTIR, TGA, finite element analysis, impact strength, and others. This project will be funded for a duration of three years. Year 1 focused on developing the proposed test methods and producing an initial rigid polyurethane foam. Year 2 focuses on refining the materials and test methods. If appropriate, design of experiment (doe) techniques will be used to optimize components, component levels, density and other variables to attain required final material properties (TGA weight loss, impact strength, etc.). Year 3 focuses on scaling up to larger engineering quantities. The application for this material is in load securement for transportation of low level radioactive waste materials within the US Department of Energy (DOE) complex. Foam in place process equipment and operators will be shielded using this novel method over current practice. Current practice can involve time consuming methods of load securement in low level radiation environments. This new technique would eliminate exposure time securing the load and greatly improve the As Low As Reasonably Attainable (ALARA) conditions. The objective is to progress to higher Technical Readiness Levels (TRL) and larger pilot scale quantities. This paper discusses methodologies and presents current results to date.

Kranjc, Mark D.↗
DOE OSTI2026

Thermal analysis of combustion synthesis of FeAlxOy catalysts for dehydrogenation of fossil fuels

The growing demand for hydrogen as a clean energy carrier highlights the need for its alternative production method with reduced CO₂ emissions. Microwave-assisted thermocatalytic dehydrogenation of fossil fuels offers a promising solution for clean hydrogen production, with FeAlxOy nanocomposites acting as efficient catalysts due to their thermal stability, catalytic activity, and microwave-absorption properties. FeAlxOy nanocomposites, fabricated by solution combustion synthesis (SCS), have shown good microwave-absorption and catalytic properties. However, the effects of synthesis parameters such as fuel type and Fe:Al molar ratio on the SCS process and properties of the final material are not well understood. The SCS process involves vaporization of water, thermal decomposition of the mixture components, and oxidation – reduction reactions. In the present work, thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) were utilized to study the SCS mechanism, with a focus on understanding decomposition processes. TGA provided insights into the thermal stability and mass loss profiles of the mixtures, while DSC quantified the heat release and identified reaction onset temperatures. Results demonstrated that the choice of fuel significantly influenced the thermal behavior and properties of FeAlxOy nanocomposites. Glycine-based mixtures exhibited superior thermal stability and complete decomposition in a single step with high heat release compared to citric acid-based mixtures, which required higher synthesis temperatures and experienced slower, two-step decomposition processes. These findings emphasize the effectiveness of glycine-fueled SCS in producing thermally stable and catalytically active FeAlxOy nanocomposites.

Martinez Espinoza, Laura Alejandra↗
DOE OSTI2025

Fabrication and characterization of nanoscale magnesium diboride and tetraboride for propulsion and hydrogen storage applications

Abstract: Boron-loaded propellants have the potential to dramatically increase the performance of solid fuel ramjets, ducted rockets, and hybrid rocket engines. However, difficult ignition of boron decreases the combustion efficiency of these propellants. One approach to solving this problem involves the use of magnesium diboride, MgB2, which ignites easier than boron. Magnesium tetraboride, MgB4, potentially offers greater energetic performance as B has a higher energy density than Mg. However, the effect of the higher boron/metal ratio on the ignition and combustion is unclear. Nanoscale MgB2 particles and quasi 2D structures are promising propellant ingredients, but the oxidation and combustion properties of nanoscale MgB4 remain unknown. Nanoscale magnesium borides are also of interest as precursors for the synthesis of magnesium borohydride, Mg(BH4)2, a promising hydrogen storage material, but hydrogenation of MgB4 has not been studied yet. The objectives of the present work included synthesis, purification, and high-energy ball milling of MgB2 and MgB4 powders as well as investigation of their hydrogen uptake, thermal decomposition, oxidation, and combustion. The powders were fabricated by combustion synthesis and by heating in a tube furnace. The latter method was superior in the synthesis of MgB4. Oxide impurities in the synthesized powders were removed by acid leaching. Nanoscale powders were obtained by ball-mill exfoliation. The hydrogen intake of the obtained magnesium borides was examined at 700 bar and 300 ℃ and did not reveal any advantage of MgB4 over MgB2. Their thermal decomposition and oxidation were investigated with thermogravimetric analysis (TGA), while their combustion was studied using laser ignition and high-speed video recording. TGA has confirmed prior observations of multistep decomposition of magnesium borides, where each step involves formation of a boride with a higher B/Mg ratio and evaporation of formed magnesium. The oxidation rates of the borides are much higher than that of boron at temperatures over 1200 °C for MgB2 and over 900 °C for MgB4. The burning rates of non-milled MgB₂ and MgB₄ powders were much higher than for the used submicron boron. Milling the MgB₂ and MgB₄ powders further increased their burning rates. The milled MgB4 burned 7.5 times faster than submicron boron.

Combustion of metals, Solid fuels, Propellants, Hy↗
DOE OSTI2025

Microwave-Assisted Reactive CO 2 Capture with the SrCO 3 -Graphite System

This study details the initial development of a microwave heat-driven reactive CO 2 capture (RCC) process using the SrO/SrCO 3 cycle and graphitic carbon to absorb ppm-levels of CO 2 from humidified room temperature air and selectively convert it into CO. By combining first-principles density functional theory (DFT) simulations with thermogravimetric analysis (TGA) and X-ray diffraction (XRD) verification, it is demonstrated that SrO spontaneously absorbs moisture to generate Sr(OH) 2 followed by Sr(OH) 2 *1H 2 O, which then can spontaneously react with atmospheric levels of CO 2 to form SrCO 3 . The resulting SrCO 3 can then react with solid carbon at elevated temperatures to selectively produce CO and regenerate SrO. Graphitic carbon is an excellent microwave absorber that can quickly generate temperatures approaching 1000 °C and then cool to room temperature within minutes, potentially allowing for integration with intermittent electricity. It is shown that using microwaves to selectively heat a mixture of graphitic carbon and SrCO 3 produced CO with 85 ± 3% selectivity and stable performance over ten cycles. The rapid heating for release and room temperature CO 2 uptake processes appeared to prevent performance loss from particle sintering typically observed with traditional thermal systems. In conclusion, these results demonstrate a new RCC approach that adds to the growing number of potential technologies available for converting CO 2 to useful chemicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Microporous structure in silicone polymers with polylactic acid and polyethylene glycol microspheres: Synthesis and characterization

Porosity in polymer parts could improve mechanical properties while reducing weight and density. Individual pores must be small enough that bulk mechanical properties are retained but significant enough to reduce the density of the material. Filler materials can be incorporated into polymer matrices and removed to create voids. Here, this paper focuses on creating spherical pores in silicone matrices by inserting and removing core materials or fillers during post-cure. A method was developed to incorporate pore formers into an uncured polymer resin and remove the pore former materials from the matrix. Polyethylene glycol (PEG) and polylactic acid (PLA) microspheres were created and incorporated into silicone matrices as pore formers. Microspheres with controllable size distributions were formed via an emulsion formation. Microspheres are removed from the matrix by solvent extraction and calcination. Thermogravimetric Analysis (TGA), Dynamic Mechanical Analysis (DMA), and optical imaging characterize and determine the successful creation of micropores in the polymer matrices.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Photovoltaic Cable Jackets: A Comparison of Representative Products Using Combined-Accelerated Stress Testing [Slides]

Photovoltaic (PV) cables facilitate the distribution of electricity collected from modules to the energy grid. Durable cabling enables continuous operation of PV installations, whereas cables with a lifetime less than the modules must be replaced - reducing electricity generation and adding to the operating expense. This study primarily focusses on the aging of the key cable types using the combined-accelerated stress testing (C-AST) protocol. Representative cables for utility, building, and control/auxiliary applications were examined. Cable jacket materials examined include: polyolefin, polyethylene, polyamide, poly(vinyl chloride), chlorinated polyethylene, thermoplastic elastomer, and ethylene propylene diene monomer rubber. Specimen characterizations applied include: optical microscopy, mechanical profilometry, instrumented indentation, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). A variety of performance and durability characteristics were observed, depending on the base material, polymer formulation, and jacket color. The results from C-AST are analyzed and discussed relative to a recent industry survey on electronic balance of system components in addition to a recent study where similar cables were aged using steady state ultraviolet weathering (International Electrotechnical Commission Technical Specification 62788-7-2). Recommendations are made for the screening, industry qualification, and service life prediction of PV cable jackets.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Evidence of a Uranium‐Paddlewheel Node in a Catecholate‐Based Metal–Organic Framework

Abstract The interactions between uranium and non‐innocent organic species are an essential component of fundamental uranium redox chemistry. However, they have seldom been explored in the context of multidimensional, porous materials. Uranium‐based metal–organic frameworks (MOFs) offer a new angle to study these interactions, as these self‐assembled species stabilize uranium species through immobilization by organic linkers within a crystalline framework, while potentially providing a method for adjusting metal oxidation state through coordination of non‐innocent linkers. We report the synthesis of the MOF NU‐1700 , assembled from U 4+ ‐paddlewheel nodes and catecholate‐based linkers. We propose this highly unusual structure, which contains two U 4+ ions in a paddlewheel built from four linkers—a first among uranium materials—as a result of extensive characterization via powder X‐ray diffraction (PXRD), sorption, transmission electron microscopy (TEM), and thermogravimetric analysis (TGA), in addition to density functional theory (DFT) calculations.

Knapp, Julia G.↗
DOE OSTI2023

Evidence of a Uranium‐Paddlewheel Node in a Catecholate‐Based Metal–Organic Framework

Abstract The interactions between uranium and non‐innocent organic species are an essential component of fundamental uranium redox chemistry. However, they have seldom been explored in the context of multidimensional, porous materials. Uranium‐based metal–organic frameworks (MOFs) offer a new angle to study these interactions, as these self‐assembled species stabilize uranium species through immobilization by organic linkers within a crystalline framework, while potentially providing a method for adjusting metal oxidation state through coordination of non‐innocent linkers. We report the synthesis of the MOF NU‐1700 , assembled from U 4+ ‐paddlewheel nodes and catecholate‐based linkers. We propose this highly unusual structure, which contains two U 4+ ions in a paddlewheel built from four linkers—a first among uranium materials—as a result of extensive characterization via powder X‐ray diffraction (PXRD), sorption, transmission electron microscopy (TEM), and thermogravimetric analysis (TGA), in addition to density functional theory (DFT) calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Development of green-colour-emitting pyrotechnics as a core for 3D temperature imaging sensors inside coal boilers

Efficiency in the control operation of the boilers for coal and coal with biomass can be further improved if the flue gas temperature distribution can be better characterized. This is very difficult in these harsh environmental systems, where spatially resolved measurements are nearly impossible with solid-state sensors. Here, in this work, we evaluate the development of pyrotechnic compounds that would serve as the basis for a novel optical mapping of the temperature inside coal boilers. For this purpose, various green-colour-emitting pyrotechnics using BaCl 2 · 2H 2 O and Ba(NO 3 ) 2 as the green light source were prepared, as this colour offers a distinct signal from the combustion-based background in the boiler. These pyrotechnics were characterized using thermogravimetric analysis (TGA) and X-ray diffraction (XRD) and tested using a flat-flame burner. Furthermore, the composition was varied to evaluate the effect of different metal fuels such as Sn, Co, and Mg, as well as various binders such as ethylcellulose, shellac, parlon, and PVC on green light emission. The emission intensity and the apparent ignition temperature were strongly dependent on the metal type, with Mg showing higher intensities. On the other hand, the effect of the binder showed that the ignition behaviour, emission intensity, and spectral purity were influenced by the nature and exothermicity of the binder. The addition of other potential green light-producing materials, such as boric acid, increased the intensity of emission by 17% for a BaCl 2 · 2H 2 O-based composition. This study identified prospective compositions with intense and bright green-colour emissions that have high spectral purities.

42 ENGINEERING↗
DOE OSTI2023

Novel Co 5 Cluster Based Triazole Bridged Cobalt-Fluorophosphate: Synthesis, Structure, Magnetic and Heterogeneous Catalytic Epoxidation Studies

A novel triazole bridged cobalt fluorophosphate coordination polymer with the formula {Co 5 (1,2,4-triazole) 2 (OH) 2 (PO 3 F) 4 } n has been synthesized. Single crystal X-ray studies reveal that the compound comprises of Co 5 clusters which ultimately build the whole framework, here all cobalt centers are in octahedral geometry established from continuous shape analysis. All the cobalt centers are in Co(II) oxidation state and the results are supported by the bond valence sum (BVS) calculation. The sample has been characterized by single crystal X-ray, powder X-ray, FTIR and TGA analysis. The compound was tested for olefin catalysis performance and magnetism. Magnetization measurements reveal overall antiferromagnetic interactions among the Co(II) ions. The compound is very active in the catalytic transformation of olefins to their corresponding epoxides. In conclusion, catalytic epoxidation studies reveal that cyclohexene and styrene can be converted up to 97% with almost 65% selectivity of products with higher TON numbers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Fluorine-Free Superhydrophobic Coatings: Rapid Fabrication and Highly Efficient Oil/Water Separation

In this work, a rapid method is demonstrated to obtain a fluorine-free superhydrophobic/superoleophilic coating by a simple two-step method: dip-coating and oven curing. The chemical structure of the coating is based on the crosslinking reaction of an alkyl methacrylate, a dimethacrylate (crosslinker) and a silane (adhesive), using AIBN as initiator, toluene as solvent, and silica nanoparticles to enhance surface roughness. Chemorheology results show that the coating is fully cured even in 20 min at 100 °C, exhibiting a water contact angle (CA) of 162 ± 2°, sliding angle (SA) of 4 ± 1°, nanometrical structures throughout the surface, and excellent adhesion properties for the mesh screen. The coating exhibits outstanding oil/water separation efficiency (96–99%) for seven different types of oil (gasoline, diesel, petroleum ether, hexane, toluene, chloroform, and dichloromethane), and in addition presents high recyclability. Based on nonisothermal TGA, the activation energy of degradation, calculated using the Kissinger and Ozawa models, is 113.5 and 114 kJ mol -1 , respectively. Finally, the coating is thermally aged at 150 °C: the CA exhibits a smooth decrease up to 129 ± 1° at 120 min, and FTIR analysis shows structural changes possibly related to the generation of thermal oxidation products.

36 MATERIALS SCIENCE↗