Search NASA⌕ Search

SEARCH · Search NASA

Results for “TM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Materials Data on Tm(GeRh2)2 by Materials Project

Tm(Rh2Ge)2 crystallizes in the orthorhombic Pnma space group. The structure is three-dimensional. Tm is bonded in a 2-coordinate geometry to eleven Rh and two equivalent Ge atoms. There are a spread of Tm–Rh bond distances ranging from 2.79–3.21 Å. Both Tm–Ge bond lengths are 3.04 Å. There are four inequivalent Rh sites. In the first Rh site, Rh is bonded in a 12-coordinate geometry to three equivalent Tm and four Ge atoms. There are a spread of Rh–Ge bond distances ranging from 2.45–2.64 Å. In the second Rh site, Rh is bonded in a 5-coordinate geometry to three equivalent Tm, three equivalent Rh, and three Ge atoms. There are one shorter (3.00 Å) and two longer (3.01 Å) Rh–Rh bond lengths. There are one shorter (2.49 Å) and two longer (2.55 Å) Rh–Ge bond lengths. In the third Rh site, Rh is bonded in a 1-coordinate geometry to two equivalent Tm, three equivalent Rh, and four Ge atoms. There are two shorter (2.86 Å) and one longer (2.92 Å) Rh–Rh bond lengths. There are a spread of Rh–Ge bond distances ranging from 2.40–2.66 Å. In the fourth Rh site, Rh is bonded in a 4-coordinate geometry to three equivalent Tm, six Rh, and four Ge atoms. There are a spread of Rh–Ge bond distances ranging from 2.48–2.70 Å. There are two inequivalent Ge sites. In the first Ge site, Ge is bonded in a 9-coordinate geometry to two equivalent Tm and seven Rh atoms. In the second Ge site, Ge is bonded in a 8-coordinate geometry to eight Rh atoms.

36 MATERIALS SCIENCE↗

Materials Data on Tm(MnAl)6 by Materials Project

Tm(MnAl)6 crystallizes in the orthorhombic Immm space group. The structure is three-dimensional. Tm is bonded in a 8-coordinate geometry to twelve Mn and eight Al atoms. There are four shorter (3.19 Å) and eight longer (3.30 Å) Tm–Mn bond lengths. There are a spread of Tm–Al bond distances ranging from 2.88–3.02 Å. There are two inequivalent Mn sites. In the first Mn site, Mn is bonded in a 12-coordinate geometry to two equivalent Tm, four Mn, and six Al atoms. There are two shorter (2.46 Å) and two longer (2.51 Å) Mn–Mn bond lengths. There are a spread of Mn–Al bond distances ranging from 2.52–2.62 Å. In the second Mn site, Mn is bonded to two equivalent Tm, four equivalent Mn, and six Al atoms to form a mixture of distorted corner, edge, and face-sharing MnTm2Mn4Al6 cuboctahedra. There are a spread of Mn–Al bond distances ranging from 2.61–2.64 Å. There are three inequivalent Al sites. In the first Al site, Al is bonded in a 10-coordinate geometry to one Tm, six Mn, and three Al atoms. There are one shorter (2.69 Å) and two longer (2.80 Å) Al–Al bond lengths. In the second Al site, Al is bonded in a 8-coordinate geometry to one Tm, six Mn, and three Al atoms. There are one shorter (2.80 Å) and two longer (3.01 Å) Al–Al bond lengths. In the third Al site, Al is bonded in a 12-coordinate geometry to two equivalent Tm, six Mn, and four Al atoms.

36 MATERIALS SCIENCE↗

Materials Data on Tm(AlCr)6 by Materials Project

Tm(CrAl)6 crystallizes in the orthorhombic Immm space group. The structure is three-dimensional. Tm is bonded in a 8-coordinate geometry to twelve Cr and eight Al atoms. There are four shorter (3.29 Å) and eight longer (3.34 Å) Tm–Cr bond lengths. There are a spread of Tm–Al bond distances ranging from 2.93–3.03 Å. There are two inequivalent Cr sites. In the first Cr site, Cr is bonded to two equivalent Tm, four Cr, and six Al atoms to form a mixture of distorted corner, edge, and face-sharing CrTm2Al6Cr4 cuboctahedra. There are two shorter (2.51 Å) and two longer (2.53 Å) Cr–Cr bond lengths. There are a spread of Cr–Al bond distances ranging from 2.59–2.67 Å. In the second Cr site, Cr is bonded to two equivalent Tm, four equivalent Cr, and six Al atoms to form a mixture of distorted corner, edge, and face-sharing CrTm2Al6Cr4 cuboctahedra. There are a spread of Cr–Al bond distances ranging from 2.65–2.69 Å. There are three inequivalent Al sites. In the first Al site, Al is bonded in a 10-coordinate geometry to one Tm, six Cr, and three Al atoms. There are one shorter (2.68 Å) and two longer (2.85 Å) Al–Al bond lengths. In the second Al site, Al is bonded in a 8-coordinate geometry to one Tm, six Cr, and two equivalent Al atoms. Both Al–Al bond lengths are 3.05 Å. In the third Al site, Al is bonded in a 12-coordinate geometry to two equivalent Tm, six Cr, and four Al atoms.

36 MATERIALS SCIENCE↗

Materials Data on Tm(AlCu)6 by Materials Project

Tm(CuAl)6 crystallizes in the orthorhombic Immm space group. The structure is three-dimensional. Tm is bonded in a 12-coordinate geometry to twelve Cu and eight Al atoms. There are four shorter (3.19 Å) and eight longer (3.29 Å) Tm–Cu bond lengths. There are a spread of Tm–Al bond distances ranging from 2.95–3.08 Å. There are two inequivalent Cu sites. In the first Cu site, Cu is bonded in a 12-coordinate geometry to two equivalent Tm, four Cu, and six Al atoms. There are two shorter (2.51 Å) and two longer (2.53 Å) Cu–Cu bond lengths. There are a spread of Cu–Al bond distances ranging from 2.51–2.63 Å. In the second Cu site, Cu is bonded in a 12-coordinate geometry to two equivalent Tm, four equivalent Cu, and six Al atoms. There are a spread of Cu–Al bond distances ranging from 2.61–2.73 Å. There are three inequivalent Al sites. In the first Al site, Al is bonded in a 10-coordinate geometry to one Tm, six Cu, and three Al atoms. There are one shorter (2.62 Å) and two longer (2.83 Å) Al–Al bond lengths. In the second Al site, Al is bonded in a 8-coordinate geometry to one Tm, six Cu, and three Al atoms. There are one shorter (2.64 Å) and two longer (2.89 Å) Al–Al bond lengths. In the third Al site, Al is bonded in a 12-coordinate geometry to two equivalent Tm, six Cu, and four Al atoms.

36 MATERIALS SCIENCE↗

Syntheses, crystal structures and optical spectroscopy of Ln{sub 2}(SO{sub 4}){sub 3}.8H{sub 2}O (Ln=Ho, Tm) and Pr{sub 2}(SO{sub 4}){sub 3}.4H{sub 2}O

The lanthanide sulphate octahydrates Ln{sub 2}(SO{sub 4}){sub 3}.8H{sub 2}O (Ln=Ho, Tm) and the respective tetrahydrate Pr{sub 2}(SO{sub 4}){sub 3}.4H{sub 2}O were obtained by evaporation of aqueous reaction mixtures of trivalent rare earth oxides and sulphuric acid at 300 K. Ln{sub 2}(SO{sub 4}){sub 3}.8H{sub 2}O (Ln=Ho, Tm) crystallise in space group C2/c (Z=4, a{sub Ho}=13.4421(4) A, b{sub Ho}=6.6745(2) A, c{sub Ho}=18.1642(5) A, {beta}{sub Ho}=102.006(1) A{sup 3} and a{sub Tm}=13.4118(14) A, b{sub Tm}=6.6402(6) A, c{sub Tm}=18.1040(16) A, {beta}{sub Tm}=101.980(8) A{sup 3}), Pr{sub 2}(SO{sub 4}){sub 3}.4H{sub 2}O adopts space group P2{sub 1}/n (a=13.051(3) A, b=7.2047(14) A, c=13.316(3) A, {beta}=92.55(3) A{sup 3}). The vibrational and optical spectra of Ho{sub 2}(SO{sub 4}){sub 3}.8H{sub 2}O and Pr{sub 2}(SO{sub 4}){sub 3}.4H{sub 2}O are also reported. -- Graphical abstract: In the lanthanide sulphate octahydrates the cations form slightly undulated layers. Between the layers are voids in which sulphate tetrahedra and water molecules are located. The holmium compound exhibits an Alexandrite effect. Display Omitted Highlights: {yields} Determination of the optimum conditions for the growth of single-crystals of Ln{sub 2}(SO{sub 4}){sub 3}.8H{sub 2}O (Ln=Ho, Tm) and Pr{sub 2}(SO{sub 4}){sub 3}.4H{sub 2}O. {yields} Single-crystal structure elucidation of Ln{sub 2}(SO{sub 4}){sub 3}.8H{sub 2}O (Ln=Ho, Tm) including hydrogen bonds. {yields} Single-crystal structure determination of Pr{sub 2}(SO{sub 4}){sub 3}.4H{sub 2}O including hydrogen bonds. {yields} UV-vis spectra of Ho{sub 2}(SO{sub 4}){sub 3}.8H{sub 2}O and Pr{sub 2}(SO{sub 4}){sub 3}.4H{sub 2}O recorded and interpreted: Assignation of bands and clarification of the Alexandrite effect of the Ho compound. {yields} IR and Raman spectra of Ln{sub 2}(SO{sub 4}){sub 3}.8H{sub 2}O (Ln=Ho, Tm) and Pr{sub 2}(SO{sub 4}){sub 3}.4H{sub 2}O recorded and interpreted.

36 MATERIALS SCIENCE↗

Citrate-based sol-gel synthesis of blue- and green-emitting BaLa{sub 2}WO{sub 7}:Tm{sup 3+} or Er{sup 3+} phosphors and their luminescence properties

Highlights: • The BLWO:Tm{sup 3+} or Er{sup 3+} phosphors were prepared by a citrate-based sol-gel method. • The BLWO:Tm{sup 3+} or Er{sup 3+} phosphors exhibited blue and green emissions under UV or NUV excitations. • The blue- and green-emitting BLWO:Tm{sup 3+} or Er{sup 3+} phosphors exhibited good thermal properties. - Abstract: BaLa{sub 2}WO{sub 7}:Tm{sup 3+} or Er{sup 3+} (BLWO:Tm{sup 3+} or Er{sup 3+}) single doped phosphors were prepared by a citrate-based sol-gel method. The crystalline properties of the prepared blue- and green-emitting phosphor materials were analyzed by X-ray diffraction (XRD) after annealing at 1350 °C. The XRD patterns of the both phosphors revealed monoclinic structure with a space group of P21/b. The morphological properties and elemental mappings of the BLWO:0.02Tm{sup 3+} and BLWO:0.01Er{sup 3+} phosphors were measured by field-emission scanning electron microscope images and energy dispersive X-ray spectrum, respectively. The photoluminescence (PL) spectra of BLWO:Tm{sup 3+} phosphors showed characteristic emission peaks of Tm{sup 3+} ions from the visible blue to near-infrared regions with the dominant emission at 799 nm ({sup 3}H{sub 4} → {sup 3}H{sub 6}) under ultraviolet (UV) and near-UV excitation wavelengths. Similarly, Er{sup 3+} ions activated BLWO phosphors exhibited intense green emissions at 548 nm ({sup 4}S{sub 3/2} → {sup 4}I{sub 15/2}) under the characteristic excitation wavelength of 381 nm. Furthermore, the temperature-dependent PL emission spectra and the luminescence decay curves were measured for the optimized BLWO:0.02Tm{sup 3+} and BLWO:0.01Er{sup 3+} phosphors. The chromaticity coordinates for the optimized blue- and green-emitting phosphors were calculated.

36 MATERIALS SCIENCE↗

Tunable quasi-cw two-micron lasing in diode-pumped crystals of mixed Tm{sup 3+}-doped sodium - lanthanum - gadolinium molybdates and tungstates

Two-micron lasing is obtained for the first time on the {sup 3}F{sub 4} {yields} {sup 3}H{sub 6} transition of Tm{sup 3+} ions in diode-pumped crystals of mixed sodium - lanthanum - gadolinium tungstate Tm:NaLa{sub 1/2}Gd{sub 1/2}(WO{sub 4}){sub 2} (C{sub Tm} = 3.6 at %) (3.6Tm : NLGW) and molybdate Tm:NaLa{sub 1/3}Gd{sub 2/3}(MoO{sub 4}){sub 2} (C{sub Tm} = 4.8 at %) (4.8Tm : NLGM). For the 3.6Tm : NLGW crystal, the quasi-cw laser output power exceeded 200 mW and the slope efficiency (with respect to absorbed pump power) for the {pi}- and {sigma}-polarisations at wavelengths of 1908 and 1918 nm was 34% and 30%, respectively. The laser wavelength of this crystal was continuously tuned within the spectral range of 1860 - 1935 nm. For the 4.8Tm : NLGM crystal, the slope efficiency for the {pi}- and {sigma}-polarisations at wavelengths of 1910 and 1918 nm was 27% and 23%, respectively, and the laser wavelength was tunable within the spectral range of 1870 - 1950 nm. (lasers)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Study of encapsulated {sup 170}Tm sources for their potential use in brachytherapy

Purpose: High dose-rate (HDR) brachytherapy is currently performed with {sup 192}Ir sources, and {sup 60}Co has returned recently into clinical use as a source for this kind of cancer treatment. Both radionuclides have mean photon energies high enough to require specific shielded treatment rooms. In recent years, {sup 169}Yb has been explored as an alternative for HDR-brachytherapy implants. Although it has mean photon energy lower than {sup 192}Ir, it still requires extensive shielding to deliver treatment. An alternative radionuclide for brachytherapy is {sup 170}Tm (Z=69) because it has three physical properties adequate for clinical practice: (a) 128.6 day half-life, (b) high specific activity, and (c) mean photon energy of 66.39 keV. The main drawback of this radionuclide is the low photon yield (six photons per 100 electrons emitted). The purpose of this work is to study the dosimetric characteristics of this radionuclide for potential use in HDR-brachytherapy. Methods: The authors have assumed a theoretical {sup 170}Tm cylindrical source encapsulated with stainless steel and typical dimensions taken from the currently available HDR {sup 192}Ir brachytherapy sources. The dose-rate distribution was calculated for this source using the GEANT4 Monte Carlo (MC) code considering both photon and electron {sup 170}Tm spectra. The AAPM TG-43 U1 brachytherapy dosimetry parameters were derived. To study general properties of {sup 170}Tm encapsulated sources, spherical sources encapsulated with stainless steel and platinum were also studied. Moreover, the influence of small variations in the active core and capsule dimensions on the dosimetric characteristics was assessed. Treatment times required for a {sup 170}Tm source were compared to those for {sup 192}Ir and {sup 169}Yb for the same contained activity. Results: Due to the energetic beta spectrum and the large electron yield, the bremsstrahlung contribution to the dose was of the same order of magnitude as from the emitted gammas and characteristic x rays. Moreover, the electron spectrum contribution to the dose was significant up to 4 mm from the source center compared to the photon contribution. The dose-rate constant {Lambda} of the cylindrical source was 1.23 cGy h{sup -1} U{sup -1}. The behavior of the radial dose function showed promise for applications in brachytherapy. Due to the electron spectrum, the anisotropy was large for r<6 mm. Variations in manufacturing tolerances did not significantly influence the final dosimetry data when expressed in cGy h{sup -1} U{sup -1}. For typical capsule dimensions, maximum reference dose rates of about 0.2, 10, and 2 Gy min{sup -1} would then be obtained for {sup 170}Tm, {sup 192}Ir, and {sup 169}Yb, respectively, resulting in treatment times greater than those for HDR {sup 192}Ir brachytherapy. Conclusions: The dosimetric characteristics of source designs exploiting the low photon energy of {sup 170}Tm were studied for potential application in HDR-brachytherapy. Dose-rate distributions were obtained for cylindrical and simplified spherical {sup 170}Tm source designs (stainless steel and platinum capsule materials) using MC calculations. Despite the high activity of {sup 170}Tm, calculated treatment times were much longer than for {sup 192}Ir.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

U.S. implementation of Q12{sup TM} zirconium alloy for improved stability of structural components

AREVA NP undertook the Q12{sup TM} research and development program to optimize the contribution to fuel assembly dimensional stability of structural components fabricated from ultra-low tin Zr-1Nb-Sn-Fe quaternary alloys. Because Q12{sup TM} is an evolutionary development of the current M5 alloy metallurgy, it benefits from the extensive industrial experience already gained with the latter. The Q12{sup TM} alloy is processed in the same way as M5, with slight increases in tin (Sn) and iron (Fe) contents. For structural components, these chemistry modifications provide higher irradiation creep strength and improved corrosion performance over Zircaloy-4. Fuel assemblies with quaternary alloy guide tubes are thus expected to increase robustness with respect to fuel assembly bow, improve growth characteristics, and maintain high burnup capability. The basic material properties have been determined through various in-core and out-of-core test programs. Components made from Q12{sup TM} have undergone irradiation in lead assemblies and in batch fuel for 13 Pressurized Water Reactor (PWR) units worldwide. Fuel with Q12{sup TM} guide tubes and grids has achieved a fuel assembly average burnup of 60 GWd/tU. Post irradiation examinations of these components have demonstrated that Q12{sup TM} performs in a stable, predictable manner. AREVA NP has submitted a topical report (TR) for Q12{sup TM} as a structural material to the United States Nuclear Regulatory Commission (US-NRC). This TR outlines the material behavior and performance of Q12{sup TM} for both guide tubes and grids. Once approved, implementation of Q12{sup TM} material throughout US PWR fuel designs will enhance dimensional stability of structural components. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

The Elusive “Life” of LEDs: How TM-21 Contributes to the Solution

This magazine article discusses the issue of LED 'lifetime' and explains where TM-21 plays as part of the solution to this issue. In August 2011, the Illuminating Engineering Society (IES) published the TM-21 document entitled 'Lumen degradation lifetime estimation method for LED light sources.' TM-21 is the IES-recommended method for projecting lumen degradation of an LED package, array or module based on data collected according to LM-80. The lighting community expects TM-21 to become the standard method for projecting useful LED lighting product life at realistic operating temperature. This article presents the development process behind TM-21, and clarifies how and when to apply the lifetime extrapolation method to arrive at reasonable and useful estimations. Why TM-21 and why now? We are all familiar with the very real but sometimes exaggerated long-life attributes of LED technology. Not the least of these is the potential for very long life that helps make it an attractive design choice. The trick has been and continues to be how to measure or estimate this longevity to provide assurance to users of this technology's reliability (life) compared to other options. We also understand that the overall reliability of a complete LED lighting fixture can be affected by the reliability of individual product components (driver, lens, etc.) and should be accounted for in lifetime estimations. The useful life of standard lighting technologies is defined as the time to filament or cathode failure. For most of these lamps, the time period prior to failure exhibits acceptable levels of light output, as shown with the solid lines in Fig. 1. This makes it easy to determine when to replace the lamp. However, LEDs do not have filament burn-out that conveniently announces the end of life (dashed line in Fig. 1). Further, the rapid development of the technology and the desire to bring products to market in a timely manner does not allow for actual testing verification of the long lives claimed (100,000 or even 35,000 hours). As a result, the industry has come to accept a definition of the end of the useful life of an LED as the point when it no longer provides a specified level of light output. And finally, the life and performance of LED lighting products depends greatly on excess heat retained at the diode. This is why LEDs require testing at multiple temperatures such that when a source is installed in a luminaire, its actual operating temperature can be measured and lumen depreciation of the product can be derived. Therefore, to serve the solid-state lighting industry, the Technical Procedures Committee (TPC) of the IES proceeded to develop appropriate tests for use in rating LED product longevity. The initial need was a measure of the basic lumen degradation of LED source components identified by a module, package, or array of diodes and this came in the form of LM-80. Importantly, LM-80 only specifies how to measure lumen depreciation to a minimum of 6000 hours (but recommends testing to 10,000 hours or longer). LM-80 stops short of using that data to estimate any depreciation after that, which is where TM-21 comes in. The TM-21 working group (WG) as part of the IES TPC was formed to develop the lumen depreciation projection method and spent over three years exploring many options. The WG evaluated various projection options starting with an analysis of various mathematical, engineering-based models to provide effective depreciation fit and a useful projection method. Next, the WG analyzed LED lumen maintenance behavior using over 40 sets of LM-80-08 test data (20 sets with 10,000 hours or more) collected from four major LED manufacturers. The working group also examined the accuracy of proposed projections using various proposed models and LM-80 data that extended up to 15,000 hours.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Yb{sub 14−x}Tm{sub x}MnSb{sub 11} (0<x<0.5): Structure and magnetic properties

The compounds, Yb{sub 14−x}Tm{sub x}MnSb{sub 11} (0<x<0.5), were synthesized as single crystals via Sn flux. The maximum amount of Tm was determined from wavelength dispersive microprobe analysis to be x=0.45 (1). Single crystal data are consistent with the Ca{sub 14}AlSb{sub 11} structure type and one formula unit can be described as consisting of 14 Yb{sup 2+} cations, MnSb{sub 4} tetrahedron, Sb{sub 3} linear anion and 4 Sb{sub 3}{sup -} anions. The site occupancy of the Tm atom was not determined because of the small amount and small difference in scattering between Tm and Yb. The difference in bond lengths or angles between the solid solution and pristine Yb{sub 14}MnSb{sub 11} is less than 1%. The magnetic susceptibility of samples prepared by Sn flux with the nominal composition of Yb{sub 14−x}Tm{sub x}MnSb{sub 11} (x=0.1, 0.2, 0.3, and 0.4), show that these phases are ferromagnetic at low temperature with the T{sub C} decreasing from 56 to 39 K with increasing x. Magnetic saturation for the x=0.4 composition at 5 K is consistent with Tm being present as Tm{sup 3+} and a negative magnetoresistance ratio (MR=[(ρ(H)−ρ(0))/ρ(H)]×100%) of 18% at 3 T is observed. -- Graphical abstract: Magnetic susceptibility (χ) for Yb{sub 14−x}Tm{sub x}MnSb{sub 11} at H{sub a}=0.01 T as a function of temperature along with a view of the structure. Highlights: • New rare earth containing transition metal Zintl phase. • Control of magnetic properties through aliovalent substitution. • Magnetic ordering due to both d and f electrons. • Large magnetoresistance at low temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemical bond parameters and photoluminescence of a natural-white-light Ca{sub 9}La(VO{sub 4}){sub 7}:Tm{sup 3+},Eu{sup 3+} with one O{sup 2−}→V{sup 5+} charge transfer and dual f-f transition emission centers

The relationship between the photoluminescence properties and the crystal structure of undoped, Eu{sup 3+} or/ and Tm{sup 3+} singly or codoped Ca{sub 9}La(VO{sub 4}){sub 7} (CLaVO) samples was discussed. Under the excitation of UV light, CLaVO:Tm{sup 3+}, CLaVO, and CLaVO:Eu{sup 3+} exhibit the characteristic emissions of Tm{sup 3+} ({sup 1}G{sub 4}→{sup 3}H{sub 6}, blue), O{sup 2−}→V{sup 5+} charge transfer (CT), and Eu{sup 3+} ({sup 5}D{sub 0}→{sup 7}F{sub 2}, red), respectively. By adjusting the doping concentration of Tm{sup 3+} and Eu{sup 3+} ions in CLaVO, a natural white emission in a single composition with the color temperature at 6181 K was obtained. Based on the dielectric theory of complex crystal, the chemical bond parameters of La-O and V-O bonds were quantitatively calculated. The standard deviation of environmental factor of every bond (EFSD), which can be expressed as σ(h{sub e{sub i}})=√((1/N)∑{sub i=1}{sup N}(h{sub e{sub i}}−μ){sup 2}) (h{sub e{sub i}}=(f{sub c{sub i}}α{sub b{sub i}}){sup 1/2}Q{sub B{sub i}} and μ=(1/N)∑{sub i=1}{sup N}h{sub e{sub i}}), was proposed to quantitatively express the distortion degree of VO{sub 4}{sup 3−} from that of an ideal tetrahedron. The maximum change of EFSD comes from the [VO{sub 4}]{sup −} tetrahedra in CLaVO sample by comparison with that of EFSD of isostructural Ca{sub 9}Gd(VO{sub 4}){sub 7}. This is possible the key reason that the undoped CLaVO sample has self-activated emission while the self-activated emission of its isostructural Ca{sub 9}Gd(VO{sub 4}){sub 7} sample cannot be found. The quantitative calculation also demonstrated that the broad excitation bands at 319 nm in CLaVO:Tm and at 335 nm in CLaVO:Eu were due to the O-V2 and O-V3 (overlap with O-V2) CT, not the CT energy of O{sup 2−}-Eu1{sup 3+} (O{sup 2−}-Tm1{sup 3+}), O{sup 2−}-Eu2{sup 3+} (O{sup 2−}-Tm2{sup 3+}), and O{sup 2−}-Eu3{sup 3+} (O{sup 2−}-Tm3{sup 3+}). The environmental factors surrounding the atoms V1, V2 and V3 were calculated to be 1.577, 1.6379 and 1.7554, respectively. It can be demonstrated that the excitation spectra at 319 nm for CLaVO:Tm and 335 nm for CLaVO:Eu came from the O-V2 and O-V3 CT, respectively. - Graphical abstracts: The relationship between the photoluminescence properties and the crystal structure of undoped, Eu{sup 3+} or/ and Tm{sup 3+} singly or codoped Ca{sub 9}La(VO{sub 4}){sub 7} (CLaVO) samples was discussed experimentally and theoretically. - Highlights: ●The photoluminescence properties of Ca{sub 9}La(VO{sub 4}){sub 7}:Eu, Tm were measured. ●The tunable color including white emission can be obtained. ●The important chemical bond parameters of O-V were calculated quantitatively. ●The standard deviation of environmental factor of every bond was proposed. ●The theoretical analysis of the self-activated emission for Ca{sub 9}La(VO{sub 4}){sub 7} was given.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Near-infrared quantum-cutting luminescence and energy transfer properties of Ca{sub 3}(PO{sub 4}){sub 2}:Tm{sup 3+},Ce{sup 3+} phosphors

The phosphors Ca{sub 3}(PO{sub 4}){sub 2}:Tm{sup 3+} by co-doping Ce{sup 3+} have been synthesized by conventional high-temperature solid-state reaction method. Their spectroscopic properties in the UV-VIS-NIR range have been investigated. The first 5d crystal field level location and stokes shift have been determined from the UV excitation and emission spectra of Ca{sub 3}(PO{sub 4}){sub 2}:Ce{sup 3+}. The three-photon NIR quantum-cutting luminescence of Tm{sup 3+} assigned to the electronic transitions of {sup 1}G{sub 4}→{sup 3}H{sub 4}, {sup 3}H{sub 4}→{sup 3}F{sub 4} and {sup 3}F{sub 4}→{sup 3}H{sub 6} is observed, whether in Ca{sub 3}(PO{sub 4}){sub 2}:Tm{sup 3+} or Ca{sub 3}(PO{sub 4}){sub 2}:Tm{sup 3+},Ce{sup 3+}. The energy transfer from Ce{sup 3+} to Tm{sup 3+} takes place with energy-transfer efficiency up to 34.5% for the Ca{sub 3}(PO{sub 4}){sub 2}:Tm{sup 3+},Ce{sup 3+}. A cross relaxation scheme using the 5d states of Ce{sup 3+} and f-f transition of Tm{sup 3+} is proposed. The mechanism is revealed from energy level and decay measurements. The results show that the broadband absorption of Ce{sup 3+} sensitizer not only extends the spectrum conversion in UV region but also greatly enhances the photoluminescence intensities of the three-photon quantum cutting luminescence of Tm{sup 3+} doped Ca{sub 3}(PO{sub 4}){sub 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preliminary Study of Information Extraction of LANDSAT TM Data for a Suburban/regional Test Site

A substantial amount of spectral information is available from TM (as compared to MSS) data for a 14.25 square km area between Beltsville and Laurel, Maryland. Large buildings and street patterns were resolved in the TM imagery. While there was added information content in TM data for discriminating surburban/regional land cover, characteristics of MSS can improve land cover discrimination over TM when conventional classification procedures are used on digital data. The improved qualitization of TM is likely valuable in situations where there are spectral similarities between classes. The spatial resolution in TM decreased land cover discrimination as a result of increased within class variability. For many general digital evaluations, inclusion of four bands representing the four spectral regions can provide much useful land cover discrimination. Inclusion of TM 6 indicates an improvement in spectral class discrimination. Of primary spectral importance is the discrimination between water, vegetative surfaces, and impervious surfaces due to differences in thermal properties. Results from the principle component transformed data clearly indicates additional information content in TM over MSS.

Toll, D. L.↗

Comparison of spectroscopic properties of Tm and Ho in YAG and YLF crystals

The paper compares the cross-relaxation, energy transfer and loss processes in Tm- and Ho-doped YAG and YLF as a function of temperature, Tm concentration, and excitation power. Significant differences in the behavior of Tm and Tm,Ho in YAG and YLF crystals were found. The cross-relaxation rates of Tm(6 pct) are faster in YLF (about 5 microsec) than YAG (about 10 microsec). The energy transfer rates between Tm and Ho are faster in YLF than YAG. The time it takes for the maximum intensity of 1.7-micron emission to drop 10 percent is 25 microsec for YLF:Tm(6 pct),Ho(0.6 pct) and 65 microsec YAG:Tm(6 pct),Ho(0.5 pct). The losses occurring with increasing pump power for 2.1-micron emission of the above samples are 30 percent less in YLF than YAG. These qualitative differences point to YLF as a valuable 2-micron laser host material.

Armagan, G.↗

PNNL Report: New Study Validates Color-Rendition Specification Criteria Based on TM-30

Pacific Northwest National Laboratory (PNNL) has released the results of a study – published in Lighting Research & Technology – that validates color-preference specification criteria based on ANSI/IES TM-30-18. The result provides additional data to support TM-30 Annex E (in press), which will include tiers of recommended specification criteria for different goals (color preference, color vividness, and color fidelity), among other information related to color rendition specification. Standardized methods for evaluating the color rendition of light sources have progressed rapidly in the past five years, beginning with the publication of IES TM-30-15, followed by the adoption of CIE 224:2017, and culminating with the issuance of ANSI/IES TM-30-18 (which revised TM-30-15, made it a national standard, and unified the calculation framework of CIE 224 and IES TM-30). Importantly, none of these documents provided guidance on how to specify color rendition using the included measures; that is, no value or combination of values was identified that leads to any desired quality of the light. Dozens of experiments over the past 60 years have examined subjective evaluations of color quality—such as preference, naturalness, or vividness—although the focus has traditionally been on developing a single-number color quality metric rather than specification criteria. Further, many of these pre-LED and pre-TM-30 studies were limited in their ability to vary the lighting characteristics, preventing them from generating a complete and accurate picture of what influences color rendering quality in architectural spaces. A renewed emphasis in this area of research over the past four years has yielded a growing consensus about how measures of color fidelity (Rf), gamut area (Rg), and red chroma (Rcs,h1) can be used in combination to effectively describe several important perceptual attributes. In the new study, which was the third in a series conducted at PNNL, 90 lighting conditions with systematically varied color rendition and chromaticity were evaluated by 25 participants, who provided ratings for normalness, saturation, preference, and acceptability. The lighting conditions were specifically designed to test the bounds of previously proposed color preference criteria, while simultaneously verifying the applicability of the criteria across different values of CCT and Duv. In line with the preceding work, there were substantial differences in ratings based on color rendition, but minimal differences based on chromaticity. The tested criteria performed well, although after the experiment, some small adjustments in lower limits provided more effective divisions between tiers of performance. The adjusted criteria are: • Level 1: Rf = 78, Rg = 95, -1% = Rcs,h1 = 15% • Level 2: Rf = 74, Rg = 92, -7% = Rcs,h1 = 19% • Level 3: Rf = 70, Rg = 89, -12% = Rcs,h1 = 23%. These criteria were concurrently checked against the results from other, independent experiments, and will be included in ANSI/IES TM-30 Annex E as the specifications for color preference. The new criteria will be a valuable tool for improving lighting quality and balancing the tradeoff between color rendition and energy efficiency.

Royer, Michael P.↗

Metal Bioavailability and Ecotoxicity of Bioremediated Oils and Tailings by BioTiger{sup TM}, a Microbial Consortium

Oil Sands and Mature Fine Tailings: Oil sand reserves are a major source of oil for the United States. Oil sands are a mixture of sand, clay, water, and bitumen. The refining process requires large volumes of water and generates hazardous Mature Fine Tailings (MFTs) that are stored in engineered settling ponds. They are of major environmental concern due to their persistence and difficulty to naturally biodegrade. MFT Contaminants of Concern: Naphthenic Acids (NAs), Polycyclic Aromatic Hydrocarbons (PAHs), Benzene, Toluene, Ethylbenzene and Xylene (BTEX), Metals, Residual Bitumen. BioTiger{sup TM} (BT{sup TM}), the SRNL patented 12 component microbial consortia was found to cometabolically degrade some NAs and PAHs. Previous studies performing short term exposure (48 hours and 7 days) to BT{sup TM} have resulted in increased toxicity due to the partial degradation of PAHs forming toxic intermediates. Objective: Evaluate the ecotoxicity of BT{sup TM} remediated MFTs exposed to a 2 week period w/ yeast (Y) extract. This work will determine BT{sup TM}'s remediation of MFTs from Fort McMurray, Alberta. Acute toxicity tests will be performed under section 9 of EPA's Method for Measuring Acute Toxicity using the freshwater organism, Ceriodaphnia dubia. Monitor BT{sup TM} growth through Most Probable Number (MPN) counts, pH, and metal bioavailability will also be evaluated. Preparing tailing solutions for biodegradation: BT{sup TM} components were grown in R2A media and combined. Mother BT{sup TM} was centrifuged at 7000 rpm for 20 minutes and resuspended in Bushnell Haus. 33 g of tailings were added to 1100 mL Bushnell Haus along with yeast extract (11 g) to create a 3% tailing solution. Treatments were performed in triplicate. Preparing solutions for toxicity tests using C. dubia: Supernatant was collected immediately after centrifuging at 7000 rpm for 20 min. Supernatant was filtered via a 0.22 μm sterile system. All treatments except MFT, Y peaked at T=4. This decrease in microbial growth could be associated with toxicity from intermediate byproducts. Treatments containing only MFTs decreased in the initial 11 days before growing significantly. Final solution for MFT, Y treatment had the highest pH. This could potentially be due to increased microbial activity linked with yeast consumption. All treatments except MFT, Y peaked at T=4. This decrease in microbial growth could be associated with toxicity from intermediate byproducts. Treatments containing only MFTs decreased in the initial 11 days before growing significantly. Future Direction: Await results from Acute Toxicity Tests and Metal Bioavailability Quantification of biosurfactant production. Evaluate hydrocarbon degradation byproducts using an analytical chemistry approach. More toxicity experiments with variations in time and conditions.

54 ENVIRONMENTAL SCIENCES↗

Materials Data on Tm(SiNi5)2 by Materials Project

TmNi10Si2 crystallizes in the tetragonal P4/nmm space group. The structure is three-dimensional. Tm is bonded in a 12-coordinate geometry to sixteen Ni and four equivalent Si atoms. There are a spread of Tm–Ni bond distances ranging from 2.87–3.06 Å. All Tm–Si bond lengths are 3.15 Å. There are three inequivalent Ni sites. In the first Ni site, Ni is bonded to two equivalent Tm, eight Ni, and two equivalent Si atoms to form NiTm2Si2Ni8 cuboctahedra that share corners with six equivalent SiTm2Ni10 cuboctahedra, corners with twelve NiTm2Si2Ni8 cuboctahedra, edges with four equivalent NiTm2Si2Ni8 cuboctahedra, edges with four equivalent SiTm2Ni10 cuboctahedra, faces with two equivalent SiTm2Ni10 cuboctahedra, and faces with twelve NiTm2Si2Ni8 cuboctahedra. There are four shorter (2.40 Å) and four longer (2.46 Å) Ni–Ni bond lengths. Both Ni–Si bond lengths are 2.33 Å. In the second Ni site, Ni is bonded in a 12-coordinate geometry to one Tm, eleven Ni, and two equivalent Si atoms. There are a spread of Ni–Ni bond distances ranging from 2.40–2.96 Å. Both Ni–Si bond lengths are 2.51 Å. In the third Ni site, Ni is bonded to two equivalent Tm, eight Ni, and two equivalent Si atoms to form distorted NiTm2Si2Ni8 cuboctahedra that share corners with four equivalent SiTm2Ni10 cuboctahedra, corners with fourteen NiTm2Si2Ni8 cuboctahedra, edges with two equivalent SiTm2Ni10 cuboctahedra, edges with five NiTm2Si2Ni8 cuboctahedra, faces with four equivalent SiTm2Ni10 cuboctahedra, and faces with eleven NiTm2Si2Ni8 cuboctahedra. Both Ni–Ni bond lengths are 2.55 Å. Both Ni–Si bond lengths are 2.31 Å. Si is bonded to two equivalent Tm and ten Ni atoms to form distorted SiTm2Ni10 cuboctahedra that share corners with four equivalent SiTm2Ni10 cuboctahedra, corners with fourteen NiTm2Si2Ni8 cuboctahedra, edges with eight NiTm2Si2Ni8 cuboctahedra, faces with four equivalent SiTm2Ni10 cuboctahedra, and faces with ten NiTm2Si2Ni8 cuboctahedra.

36 MATERIALS SCIENCE↗