Search NASA⌕ Search

SEARCH · Search NASA

Results for “TPD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Experimental Setup to Investigate Hydrogen Isotope Retention on Powder Samples as Slag/Dust Proxies for Advanced Fusion Reactors

Slag/dust formation is one of the critical issues regarding tritium retention in advanced fusion reactors. We upgraded an ultrahigh vacuum device, the sample exposure station (SES), to perform temperature-programmed desorption (TPD), also known as thermal desorption spectroscopy, to investigate deuterium (D) retention in powder samples that are utilized as proxies for slag/dust particles formed in fusion reactors. TPD analysis, calibrated for the desorption rate, was successfully performed on commercially available crystalline/amorphous boron (B) powder after D 2 neutral gas or D + ion exposure. We calibrated the B powder temperature measurement for TPD analysis utilizing a D 2 desorption peak from B-D bonding known for its desorption temperature ~700 K. We introduce a separation procedure of observed D TPD signals, convoluted for corresponding D retention pathways, that was necessary for TPD analysis. This is the first report on the retention of D 2 neutral gas to B, and this observation was enabled by utilizing the B powder sample, which has a larger surface area than films commonly used in laboratory experiments. In conclusion, the upgraded SES system will enable us to investigate hydrogen isotope behaviors for powder/dust samples of various elemental compositions, including metals.

Plasma-facing component debris↗

Three-dimensional particle-in-cell modeling of parametric instabilities near the quarter-critical density in plasmas

The nonlinear regime of laser-plasma interactions including both two-plasmon decay (TPD) and stimulated Raman scattering (SRS) instabilities has been studied in three-dimensional (3D) particle-in-cell simulations with parameters relevant to the inertial confinement fusion (ICF) experiments. SRS and TPD develop in the same region in plasmas, and the generation of fast electrons can be described accurately with only the full model including both SRS and TPD. The growth of instabilities in the linear stage is found to be in good agreement with analytical theories. In the saturation stage the low-frequency density perturbations driven by the daughter waves of the SRS side scattering can saturate the TPD and consequently inhibit the fast-electron generation. As a result, the fast-electron flux in 3D modeling is up to an order of magnitude smaller than previously reported in 2D TPD simulations, bringing it close to the results of ICF experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cogeneration of hot electrons from multiple laser-plasma instabilities

Interactions of two plasmon decay (TPD) and side stimulated Raman scattering (SSRS) were studied using 3-D particle-in-cell simulations under ICF-relevant conditions for linearly and circularly polarized lasers. In the linear stage, SSRS took place under n e = 0.235n c and TPD dominated near the quarter-critical density surface and their growth rates agreed with theory. In the nonlinear stage, SSRS reduced TPD through pump depletion. Hot electrons were found to be first accelerated by the SSRS plasma waves and then by TPD plasma waves through a co-generation mechanism. Compared to the linearly polarized case with the same laser intensity, both SSRS and TPD were reduced due to the lower laser amplitude in the circularly-polarized case. As a result, a 30 percent decrease in hot electron flux was observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of optimum propellant production facilities for launch of space shuttle vehicles

An integrated propellant manufacturing plant and distribution system located at Kennedy Space Center is studied. The initial planned propellant and pressurant production amounted to 160 tons/day (TPD) LH2, 10 TPD GH2, 800 TPD LO2, 400 TPD LN2, and 120 TPD GN2. This was based on a shuttle launch frequency of 104 per year. During the study, developments occurred which may lower cryogen requirements. A variety of plant and processing equipment sizes and costs are considered for redundancy and supply level considerations. Steam reforming is compared to partial oxidation as a means of generating hydrogen. Electric motors, steam turbines, and gas turbines are evaluated for driving compression equipment. Various sites on and off Government property are considered to determine tradeoffs between costs and problems directly associated with the site, product delivery and storage costs, raw material costs, and energy costs. Coproduction of other products such as deuterium, methanol, and ammonia are considered. Legal questions are discussed concerning a private company's liabilities and its rights to market commercial products under Government tax and cost shelters.

Laclair, L. M.↗

Unexpected Nondissociative Binding of N2O on Oxygen Vacancies on a Rutile TiO2(110)-1×1

The interaction of N{sub 2}O with oxygen vacancies (V{sub O}'s) on a partially-reduced rutile TiO{sub 2}(110)-1 x 1 surface was investigated using temperature-programmed desorption (TPD). Contrary to a common belief that V{sub O} on a rutile TiO{sub 2}(110) is a dissociation site for N{sub 2}O, our results indicate that N{sub 2}O does not dissociate to form N{sub 2}(g) and O(a). In TPD, N{sub 2}O desorption shows two peaks with maxima at 135 and 175 K that are assigned to N{sub 2}O desorption from Ti{sup 4+} and V{sub O} sites, respectively, with absolute coverages determined to be 5.1 x 10{sup 14} N{sub 2}O/cm{sup -2} and 2.6 x 10{sup 13} cm{sup -2}, respectively. When V{sub O}'s are passivated by dissociative adsorption of H{sub 2}O, the N{sub 2}O desorption peak at 175 K disappears, evidencing that the peak is related to V{sub O}-bonded N{sub 2}O. The absence of N{sub 2}O dissociation on V{sub O}'s is supported by a number of observations. First, the integrated amount of N{sub 2}O desorbed from the substrate during TPD vs. the amount of N{sub 2}O dosed at 70 K shows a straight line with no offset indicating no loss of N{sub 2}O due to the N{sub 2} formation. Second, N{sub 2}O scattering experiments at 300-350 K indicate no change in the V{sub O} concentration as determined from the H{sub 2}O TPD spectra. Third, N{sub 2}O uptake experiments at 70-90 K show that the N{sub 2} desorption feature is observed from TiO{sub 2}(110) surfaces without V{sub O}'s, suggesting a possible contribution from background N{sub 2} adsorption. Based on the above observations, we conclude that N{sub 2}O does not dissociate on V{sub O} sites on TiO{sub 2}(110) in contrast with the currently accepted view.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Steam reforming of simulated bio-oil on K-Ni-Cu-Mg-Ce-O/Al 2 O 3 : The effect of K

Steam reforming of simulated bio-oil (ethanol, acetone, phenol, and acetic acid) and phenol has been studied on K-Ni-Cu-Mg-Ce-O/Al 2 O 3 composite catalysts. Complementary characterization techniques, such as nitrogen sorption, XRD, H2-TPR, H2-TPD, CO-TPD, CO-DRIFTS, and in situ XPS, were used to correlate surface structure and functionality to catalytic performance of potassium (K) doped catalysts. K doping of the Ni-Cu-Mg-Ce-O/Al 2 O 3 catalyst created a Ni°/Ni 2+ mixed active phase, which not only enhanced steam reforming activity, but also suppressed the methanation reaction. In addition, K doping changed the surface acid-basic properties of the catalyst, which instead favor the water-gas shift reaction. With the combination of these effects, K doping of Ni-Cu-Mg-Ce-O/Al 2 O 3 catalysts led to higher C1 yield and much lower methane formation, favoring hydrogen production in steam reforming of both phenol and simulated bio-oil.

Yu, Ning↗

Methylene bromide chemistry and photochemistry on rutile TiO 2 (110)

The chemistry and photochemistry of methylene bromide (CD 2 Br 2 ) on the rutile TiO 2 (110) surface was probed using temperature programmed desorption (TPD). CD 2 Br 2 desorbed in three desorption states at 145, 160 and 250 K tentatively assigned to desorption from the multilayer, from an η 1 -CD 2 Br 2 species and a bridging η 2 -CD 2 Br 2 species, respectively. The latter two TPD states presumably involve binding of CD 2 Br 2 molecules to the surface through Br coordination at five-coordinate Ti 4+ surface sites. The 160 and 250 K TPD states saturated at coverages of 1.0 and 0.33 ML, respectively, where 1 ML is equivalent to the surface Ti 4+ site density (5.2 × 10 14 cm - 2 ). No thermal decomposition of CD 2 Br 2 was observed on either the clean surface or with preadsorbed O 2 . UV irradiation of CD 2 Br 2 on TiO 2 (110) resulted in predominately photodesorption, with trace amounts of photodecomposition evidenced in TPD. The rate of CD 2 Br 2 photodesorption from TiO 2 (110) occurred with a low cross section (~ 2 × 10 - 21 cm 2 ) similar to that expected from direct optical excitation of CD 2 Br 2 . This observation suggests that charge carriers generated in TiO 2 (110) were no more effective in activating adsorbed CD 2 Br 2 molecules than would be expected through direct molecular excitation. Finally, these findings suggest that photocatalytic destruction of halocarbons such as CD 2 Br 2 on TiO 2 may preferentially occur though indirect processes (such as OH radical attack) as opposed to direct electron transfer processes involving charge carriers generated in TiO 2 by bandgap excitation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of cluster–support interactions on reactivity of size-selected Nb x O y clusters

Size-selected niobium oxide nanoclusters (Nb 3 O 5 , Nb 3 O 7 , Nb 4 O 7 , and Nb 4 O 10 ) were deposited at room temperature onto a Cu(111) surface and a thin film of Cu 2 O on Cu(111), and their interfacial electronic interactions and reactivity toward water dissociation were examined. These clusters were specifically chosen to elucidate the effects of the oxidation state of the metal centers; Nb 3 O 5 and Nb 4 O 7 are the reduced counterparts of Nb 3 O 7 and Nb 4 O 10 , respectively. From two-photon photoemission spectroscopy (2PPE) measurements, we found that the work function increases upon cluster adsorption in all cases, indicating a negative interfacial dipole moment with the positive end pointing into the surface. The amount of increase was greater for the clusters with more metal centers and higher oxidation state. Additional analysis with DFT calculations of the clusters on Cu(111) indicated that the reduced clusters donate electrons to the substrate, indicating that the intrinsic cluster dipole moment makes a larger contribution to the overall interfacial dipole moment than charge transfer. X-ray photoelectron spectroscopy (XPS) measurements showed that the Nb atoms of Nb 3 O 7 and Nb 4 O 10 are primarily Nb 5+ on Cu(111), while for the reduced Nb 3 O 5 and Nb 4 O 7 clusters, a mixture of oxidation states was observed on Cu(111). Temperature-programmed desorption (TPD) experiments with D 2 O showed that water dissociation occurred on all systems except for the oxidized Nb 3 O 7 and Nb 4 O 10 clusters on the Cu 2 O film. A comparison of our XPS and TPD results suggests that Nb 5+ cations associated with Nb=O terminal groups act as Lewis acid sites which are key for water binding and subsequent dissociation. TPD measurements of 2-propanol dehydration also show that the clusters active toward water dissociation are indeed acidic. DFT calculations of water dissociation on Nb 3 O 7 support our TPD results, but the use of bulk Cu 2 O(111) as a model for the Cu 2 O film merits future scrutiny in terms of interfacial charge transfer. The combination of our experimental and theoretical results suggests that both Lewis acidity and metal reducibility are important for water dissociation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interactions on External MOF Surfaces: Desorption of Water and Ethanol from CuBDC Nanosheets

The external surfaces of metal-organic framework (MOF) materials are difficult to experimentally isolate due to the high porosities of these materials. MOF surface surrogates in the form of copper benzenedicarboxylate (CuBDC) nanosheets were synthesized using a bottomup approach and the surface interactions of water and ethanol were investigated by temperature programmed desorption (TPD). A method of analysis of diffusion-influenced TPD was developed to measure the desorption properties of these porous materials. This approach also allows the extraction of diffusion coefficients from TPD data. The transmission Fourier transform infrared spectra, powder X-ray diffraction patterns and TPD data indicate that water desorbs from CuBDC nanosheets with activation energies of 44±2 kJ/mol at edge sites and 58 ± 1 kJ/mol at external surface and internal and pore sites. Ethanol desorbs with activation energies of 58 ± 1 kJ/mol at internal pore sites and 66 ± 0.4 kJ/mol at external surface sites. Co-adsorption of water and ethanol was also investigated. The presence of ethanol was found to inhibit the desorption of water that results in a water desorption process with an activation energy of 68 ± 0.7 kJ/mol.

36 MATERIALS SCIENCE↗

Marked Consequences of Systematic Oligothiophene Catenation in Thieno[3,4- c ]pyrrole-4,6-dione and Bithiopheneimide Photovoltaic Copolymers

As effective building blocks for high-mobility transistor polymers, oligothiophenes are receiving attention for polymer solar cells (PSCs) because the resulting polymers can effectively suppress charge recombination. In this work we investigate two series of in-chain donor–acceptor copolymers, PTPDnT and PBTInT, based on thieno[3,4-c]pyrrole-4,6-dione (TPD) or bithiopheneimide (BTI) as electron acceptor units, respectively, and oligothiophenes (nTs) as donor counits, for high-performance PSCs. Intramolecular S···O interaction leads to more planar TPD polymer backbones, however backbone torsion yields greater open-circuit voltages for BTI polymers. Thiophene addition progressively raises polymer HOMOs but marginally affects their band gaps. FT-Raman spectra indicate that PTPDnT and PBTInT conjugation lengths scale with nT catenation up to $n$ = 3 and then saturate for longer oligomer. Furthermore, the effects of oligothiophene alkylation position are explored, revealing that the alkylation pattern greatly affects film morphology and PSC performance. The 3T with “outward” alkylation in PTPD3T and PBTI3T affords optimal $π$-conjugation, close stacking, long-range order, and high hole mobilities (0.1 cm 2 /(V s)). These characteristics contribute to the exceptional ~80% fill factors for PTPD3T-based PSCs with PCE = 7.7%. The results demonstrate that 3T is the optimal donor unit among nTs ($n$ = 1–4) for photovoltaic polymers. Grazing incidence wide-angle X-ray scattering, transmission electron microscopy, and time-resolved microwave conductivity measurements reveal that the terthiophene-based PTPD3T blend maintains high crystallinity with appreciable local mobility and long charge carrier lifetime. These results provide fundamental materials structure-device performance correlations and suggest guidelines for designing oligothiophene-based polymers with optimal thiophene catenation and appropriate alkylation pattern to maximize PSC performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystallization Kinetics and Excess Free Energy of H2O and D2O Nanoscale Films of Amorphous Solid Water

Temperature-programmed desorption (TPD) and reflection absorption infrared spectroscopy (RAIRS) are used to investigate the crystallization kinetics and measure the excess free energy of metastable amorphous solid water films (ASW) of H2O and D2O grown using molecular beams. The desorption rates from the amorphous and crystalline phases of ASW are distinct, and as such, crystallization manifests can be observed in the TPD spectrum. The crystallization kinetics were studied by varying the TPD heating rate from 0.001 to 3 K/s. A coupled desorptioncrystallization kinetic model accurately simulates the desorption spectra and accurately predicts the observed temperature shifts in the crystallization. Isothermal crystallization studies using RAIRS are in agreement with the TPD results. Furthermore, highly sensitive measurements of the desorption rates were used to determine the excess free energy of ASW near 150 K. The excess entropy obtained from these data are consistent with there being a thermodynamic continuity between ASW and supercooled liquid water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Conversion of 1,3-Propylene Glycol on Rutile TiO2(110)

The adsorption of 1,3-propylene glycol (1,3-PG) on partially reduced TiO2(110) and its conversion to products have been studied by a combination of molecular beam dosing and temperature programmed desorption (TPD). When the Ti surface sites are saturated by 1,3-PG, ~80% of the molecules undergo further reactions to yield products that are liberated during the TPD ramp. In contrast to ethylene glycol (EG) and 1,2- propylene glycol (1,2-PG) that yield only alkenes and water at very low coverages (< 0.05 ML), two additional products, HCHO and C2H4, along with propylene (CH3CHCH2) and water are observed for 1,3-PG. Identical TPD line shapes and desorption yields for HCHO and C2H4 suggest that these products result from C-C bond cleavage and are coupled. At higher 1,3-PG coverages (> 0.1 ML), propanal (CH3CH2CHO) and two additional products, 1-propanol (CH3CH2CH2OH) and acrolein (CH2CHCHO), are observed. The desorption of 1-propanol is found to be coupled with the desorption of acrolein, suggesting that these products are formed by the disproportionation of two 1,3-PG molecules. The coverage dependent TPD results further show that propylene formation dominates at low coverages (< 0.3 ML), while the decomposition and disproportionation channels increase rapidly at higher coverages and reach yields comparable to that of propylene at the 1,3-PG saturation coverage of 0.5 ML. The observed surface chemistry clearly shows how the molecular structure of glycols influences their reaction pathways on oxide surfaces.

biomass↗

Photochemistry of 1,1,1-Trifluoroacetone on Rutile TiO2(110)

The ultraviolet (UV) photon-induced photodecomposition of 1,1,1-trifluoroacetone (TFA) adsorbed on the rutile TiO2(110) surface has been investigated with photon stimulated desorption (PSD), temperature programmed desorption (TPD) and density functional theory (DFT). TFA adsorbed molecularly on the reduced surface (8% oxygen vacancies) in states desorbing below 300 K with trace thermal decomposition observed in TPD. Adsorption of TFA on a preoxidized TiO2(110) surface (accomplished by pre-exposure with 20 L O2) led to formation of a new TFA desorption state at 350 K, assigned to decomposition of a TFA-diolate species ((CF3)(CH3)COO). No TFA photochemistry was detected on the reduced surface. UV irradiation of TFA on the oxidized surface depleted TFA in the 350 K state, with TFA molecules in other TPD states unaffected. PSD measurements reveal that both carbonyl substituents (CH3 and CF3), as well as CO, were liberated during UV exposure at 95 K. Post-irradiation TPD showed evidence for both acetate (evolving as ketene at 650 K) and trifluoroacetate (evolving as CO2 at 600 K) as surface-bound photodecomposition products. The CO PSD product was not due to adsorbed CO, to mass spectrometer cracking of a CO-containing PSD product, or from background effects, but originated from complete fragmentation of an unidentified adsorbed TFA species. Thermodynamic analysis using DFT indicated that the photodecomposition of the TFA-diolate was likely not driven by thermodynamics alone as both pathways (CH3+trifluoroacetate and CF3+acetate) were detected when thermodynamics shows a clear preference for only one (CF3+acetate). These observations are in contrast to the photochemical behavior of acetone, butanone and acetaldehyde on TiO2(110), where only one of the two carbonyl substituent groups was observed, with a stoichiometric amount of carboxylate containing the other substituent left on the surface. We conclude that fluorination significantly alters the electronic structure of adsorbed carbonyls on TiO2(110) in such a way as to promote multiple channels of photofragmentation. Factors that dictate the partitioning between the three TFA channels are not related to photon energy (above that of the TiO2 band gap), but likely to the electronic structure of the charge transfer excited state.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Thermal chemistry and photochemistry of hexafluoroacetone on rutile TiO2(110)

The ultraviolet (UV) photon-induced decomposition of hexafluoroacetone (HFA) adsorbed on the rutile TiO2(110) surface was investigated using photon stimulated desorption (PSD) and temperature programmed desorption (TPD). The initial 0.2 ML coverage of HFA decomposed when adsorbed on the reduced TiO2(110) surface resulting in the formation of trifluoroacetate (evolving in TPD as CO, CO2, and C2F4 near 600 K). Further HFA exposure resulted in molecular adsorption. No evidence for photochemistry was observed on the reduced surface. HFA adsorbed and desorbed molecularly on a pre-oxidized TiO2(110) surface with only a minor amount (~1%) of thermal decomposition in TPD. A new adsorption state at 350 K was assigned to the reversible formation of a photoactive HFA-diolate species [(CF3)2COO]. UV irradiation depleted the 350 K state and resulted in the formation of surface bound trifluoroacetate. PSD experiments showed that CF3, CO, and CO2 were evolved during irradiation at 95 K. Post-irradiation TPD showed evidence for trifluoroacetate (desorbing as CO, CO2, and C2F4 near 600 K) as surface-bound photodecomposition products. 18O isotope scrambling experiments showed that the origin of the ejected CO2 was from photodecomposition of the HFA-diolate species. CO photodesorption was due to an as-yet unidentified adsorbed HFA species and not due to decomposition of the HFA-diolate. These results are in contrast to the photochemical behavior of acetone, butanone and acetaldehyde on TiO2(110), where UV irradiation resulted in the gas phase ejection of one of the carbonyl substituent groups as well as a stoichiometric amount of carboxylate left on the surface. We conclude that fluorination alters the electronic structure of adsorbed carbonyls on TiO2(110) in such a way as to promote complete fragmentation of the adsorbed carbonyl complex to form gas phase CO2 as well as open up additional photodissociation pathways leading to CO production.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The reduced-description particle-in-cell model for the two plasmon decay instability

Recently, motivated by the resurgent interest in suprathermal electron generation by two plasmon decay (TPD) in direct-drive laser-fusion [J. A. Delettrez et al., Bull. Am. Phys. Soc. 53, 248 (2008); V. A. Smalyuk et al., Phys. Rev. Lett. 100, 185005 (2008); B. Yaakobi et al., Phys. Plasmas 12, 062703 (2005)], the fully kinetic, reduced-description, particle-in-cell (RPIC) methodology has been extended to include TPD. It provides a computationally efficient fully kinetic simulation tool, especially in nonlinear regimes where the Langmuir decay instability (LDI) is a dominant saturation mechanism. This RPIC methodology is an extension of the modeling of laser-plasma instabilities in underdense plasmas reported previously [H. X. Vu, B. Bezzerides, and D. F. DuBois, J. Comput. Phys. 156, 12 (1999)]. The relationship between RPIC and the extended Zakharov model previously used for TPD [D. F. DuBois, D. A. Russell, and H. A. Rose, Phys. Rev. Lett. 74, 3983 (1995)] is explored theoretically and tested in simulations. The modification of the electron velocity distribution - in particular, the generation of hot electrons - as calculated in RPIC leads to weakening of the wave turbulence excited by TPD compared to the Zakharov model predictions but the locations in wave vector space of important spectral features, e.g., arising from the LDI, of the nonlinear wave fluctuations are exactly the same in the two approaches. New results involving two oblique, overlapping laser beams, a common geometrical feature in direct-drive schemes, are presented. The two laser beams can cooperatively excite common primary Langmuir waves which initiate the LDI process.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hot-electron production and suprathermal heat flux scaling with laser intensity from the two-plasmon-decay instability

The fully kinetic reduced-description particle-in-cell (RPIC) method has been applied to simulations of two-plasmon-decay (TPD) instability, driven by crossed laser beams, in an inhomogeneous plasma for parameters consistent with recent direct-drive experiments related to laser-driven inertial fusion. The nonlinear saturated state is characterized by very spiky electric fields, with Langmuir cavitation occurring preferentially inside density channels produced by the ponderomotive beating of the crossed laser beams and the primary TPD Langmuir waves (LWs). The heated electron distribution function is, in all cases, bi-Maxwellian, with instantaneous hot-electron temperatures in the range 60-100 keV. The net hot-electron energy flux out of the system is a small fraction ({approx}1% to 2%) of the input laser intensity in these simulations. Scalings of the hot-electron temperature and suprathermal heat flux as functions of the laser intensity are obtained numerically from RPIC simulations. These simulations lead to the preliminary conclusion that Langmuir cavitation and collapse provide dissipation by producing suprathermal electrons, which stabilize the system in saturation and drive the LW spectrum to the small dissipation scales at the Landau cutoff. The Langmuir turbulence originates at an electron density 0.241 Multiplication-Sign the laser's critical density, where the crossed laser beams excite a 'triad' mode-a common forward LW plus a pair of backward LWs. Remnants of this 'triad' evolve in k-space and dominate the time-averaged energy spectrum. At times exceeding 10 ps, the excited Langmuir turbulence spreads toward lower densities. Comparisons of RPIC simulations with the extended Zakharov model are presented in appropriate regimes, and the necessary requirements for the validity of a quasi-linear Zakharov model (where the spatially averaged electron-velocity distribution is evolved) are verified by RPIC simulation results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Linear regime of two-plasmon decay and stimulated Raman scattering instability near the quarter-critical density in plasmas

A model for the interaction between the laser light and the plasma waves near the quarter-critical density in plasmas has been studied. This model includes, but is not limited to, the instabilities of two-plasmon decay (TPD) and stimulated Raman scattering (SRS). The full simulation results show the instability growth in the wavevector domains corresponding to TPD and SRS, respectively, and the domain between those two. The instability growth rates and thresholds can be calculated in our model for the parameters of the inertial confinement fusion experiments without the approximations common in analytical theories.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Controlling two plasmon decay instability in intense femtosecond laser driven plasmas

We investigate the onset of the two-plasmon-decay (TPD) instability in intense femtosecond laser-solid interaction. In particular, this instability, originating at the quarter critical electron density surface in the inhomogeneous plasma, is explored for a wide range of laser parameters-energy, pulse duration, and intensity contrast. By varying these laser parameters, we demonstrate ways to excite and control the growth of the TPD process. The pulse duration scan carried out under a constant laser fluence reveals the pulse width dependent nature of TPD growth. The spectral splitting of the TPD induced three-halves harmonic emission is used to infer the electron temperature near the quarter critical density surface. Moreover, by varying the laser contrast over four orders of magnitude, we find that the intensity threshold of three-halves harmonic emission increases by nearly two orders of magnitude. This contrast dependent intensity threshold for the emission of three-halves harmonic can be a useful diagnostic of the laser contrast.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗