Search NASA⌕ Search

SEARCH · Search NASA

Results for “TWO EQUATION MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Atmospheric flow over two-dimensional bluff surface obstructions

The phenomenon of atmospheric flow over a two-dimensional surface obstruction, such as a building (modeled as a rectangular block, a fence or a forward-facing step), is analyzed by three methods: (1) an inviscid free streamline approach, (2) a turbulent boundary layer approach using an eddy viscosity turbulence model and a horizontal pressure gradient determined by the inviscid model, and (3) an approach using the full Navier-Stokes equations with three turbulence models; i.e., an eddy viscosity model, a turbulence kinetic-energy model and a two-equation model with an additional transport equation for the turbulence length scale. A comparison of the performance of the different turbulence models is given, indicating that only the two-equation model adequately accounts for the convective character of turbulence. Turbulence flow property predictions obtained from the turbulence kinetic-energy model with prescribed length scale are only insignificantly better than those obtained from the eddy viscosity model. A parametric study includes the effects of the variation of the characteristics parameters of the assumed logarithmic approach velocity profile. For the case of the forward-facing step, it is shown that in the downstream flow region an increase of the surface roughness gives rise to higher turbulence levels in the shear layer originating from the step corner.

Bitte, J.↗
NASA NTRS1992

Two-equation turbulence modeling for 3-D hypersonic flows

An investigation to verify, incorporate and develop two-equation turbulence models for three-dimensional high speed flows is presented. The current design effort of hypersonic vehicles has led to an intensive study of turbulence models for compressible hypersonic flows. This research complements an extensive review of experimental data and the current development of 2D turbulence models. The review of experimental data on 2D and 3D flows includes complex hypersonic flows with pressure profiles, skin friction, wall heat transfer, and turbulence statistics data. In a parallel effort, turbulence models for high speed flows have been tested against flat plate boundary layers, and are being tested against the 2D database. In the present paper, we present the results of 3D Navier-Stokes numerical simulations with an improved k-omega two-equation turbulence model against experimental data and empirical correlations of an adiabatic flat plate boundary layer, a cold wall flat plate boundary layer, and a 3D database flow, the interaction of an oblique shock wave and a thick turbulent boundary layer with a free stream Mach number = 8.18 and Reynolds number = 5 x 10 to the 6th.

Bardina, J. E.↗
NASA NTRS1982

Assessment of turbulent models for scramjet flowfields

The behavior of several turbulence models applied to the prediction of scramjet combustor flows is described. These models include the basic two equation model, the multiple dissipation length scale variant of the two equation model, and the algebraic stress model (ASM). Predictions were made of planar backward facing step flows and axisymmetric sudden expansion flows using each of these approaches. The formulation of each of these models are discussed, and the application of the different approaches to supersonic flows is described. A modified version of the ASM is found to provide the best prediction of the planar backward facing step flow in the region near the recirculation zone, while the basic ASM provides the best results downstream of the recirculation. Aspects of the interaction of numerica modeling and turbulences modeling as they affect the assessment of turbulence models are discussed.

Sindir, M. M.↗
NASA NTRS1995

One-Equation Turbulence Models in Aerodynamics

The present paper shows under which assumptions one-equation models can be derived from two-equation models. Based on that transformation a new one-equation turbulence model is derived that basically behaves like a two-equation model. The new model is compared in detail against existing models

Menter, F. R.↗
NASA NTRS1987

Prediction of transition on a flat plate under the influence of free-stream turbulence using low-Reynolds-number two-equation turbulence models

The prediction characteristics and capabilities of two popular two-equation low-Reynolds-number turbulence models (Jones, Launder 1972; Lam, Bremhorst 1981) have been evaluated with respect to the prediction of transition of a flat plate under the influence of free-stream turbulence. The sensitivity of the predictions to free-stream turbulence intensity, initial starting location of the calculation, and the assumed initial starting profiles for k and epsilon has been determined and presented. Although both models predict the correct qualitative characteristics of transition, they also exhibit significant quantitative deficiencies with regard to both the predicted location and the length of transition. A modification to the production term in the turbulent kinetic energy equation is proposed which is based on a simple stability criterion and correlated to the free-stream turbulence level. The modification becomes inactive in the fully turbulent regime, but is shown to improve both the qualitative and quantitative characteristics of the transition predictions.

Schmidt, Rodney C.↗
NASA NTRS1978

Equations of motion and two-equation turbulence model for plane or axisymmetric turbulent flows in body-oriented orthogonal curvilinear coordinates and mass-averaged dependent variables

The full Navier-Stokes time-dependent, compressible, turbulent, mean-flow equations in mass-averaged variables for plane or axisymmetric flow are presented. The equations are derived in a body-oriented, orthogonal, curvilinear coordinate system. Turbulence is modelled by a system of two equations for mass-averaged turbulent kinetic energy and dissipation rate proposed. These equations are rederived and some new features are discussed. A system of second order boundary layer equations is then derived which includes the effects of longitudinal curvature and the normal pressure gradient. The Wilcox and Chambers approach is used in considering effects of streamline curvature on turbulence phenomena in turbulent boundary layer type flows. Their two-equation turbulence model with curvature terms are rederived for the cases considered in the present report. The derived system equations serves as a basis for an investigation of problems where streamline curvature is of the order of the characteristic length in the longitudinal direction.

Sislian, J. P.↗
NASA NTRS1998

Heat Transfer on a Film-Cooled Rotating Blade Using a Two Equation Turbulence Model

A three-dimensional Navier-Stokes code has been used to compare the heat transfer coefficient on a film-cooled, rotating turbine blade. The blade chosen is the ACE rotor with five rows containing 93 film cooling holes covering the entire span. This is the only film-cooled rotating blade over which experimental data is available for comparison. Over 2.278 million grid points are used to compute the flow over the blade including the tip clearance region, using Coakley's q-omega turbulence model. Results are also compared with those obtained by Garg and Abhari (1997) using the zero-equation Baldwin-Lomax (B-L) model. A reasonably good comparison with the experimental data is obtained on the suction surface for both the turbulence models. At the leading edge, the B-L model yields a better comparison than the q-omega model. On the pressure surface, however, the comparison between the experimental data and the prediction from either turbulence model is poor. A potential reason for the discrepancy on the pressure surface could be the presence of unsteady effects due to stator-rotor interaction in the experiments which are not modeled in the present computations. Prediction using the two-equation model is in general poorer than that using the zero-equation model, while the former requires at least 40% more computational resources.

Garg, Vijay K.↗
NASA NTRS2021

Solving Two-Equation Turbulence Models With a Perspective on Solving Transport Equations

There are three principal objectives of this report. The first objective is to investigate frequently used two-equation models when solving the RANS equations. In this study, we consider the 2006Wilcox and the 2003 Menter Shear Stress Transport (SST) models. Also, a simple change of the Wilcox model is introduced to improve computational predictions for transonic flows. Computations for flows over two different airfoils are examined to compare these turbulence models. Effects on modeling the physics of each flow due to variations in the models, such as using either strainrate or vorticity in the turbulence production term, are considered and discussed. The second objective of this report is to not only explore but also evaluate the performance of the solution algorithm for the mean flow and the transport equations. The RANS and turbulence modeling equations aresolved in a weakly coupled manner with a diagonal implicit Runge-Kutta (DIRK) solution algorithm. Throughout this report, emphasis is given to reducing the residuals to machine zero in all flow calculations, so as to eliminate the error due to numerical integration of the discrete governing equations. The final objective is to provide a perspective on solving transport equations for turbulence modeling. Aspects of solving such stiff systems of equations, as well as various numerical difficulties and possible techniques to overcome them, are considered. Discussion is also provided concerning what is called ’numerical compatibility’, which is an essential requirement when designing a solution algorithm for solving transport equations.

turbulence modeling↗
NASA NTRS1994

Validation of two-equation turbulence models for propulsion flowfields

The objective of the study is to assess the capability of two-equation turbulence models for simulating propulsion-related flowfields. The standard kappa-epsilon model with Chien's low Reynolds number formulation for near-wall effects is used as the baseline turbulence model. Several experimental test cases, representative of rocket combustor internal flowfields, are used to catalog the performance of the baseline model. Specific flowfields considered here include recirculating flow behind a backstep, mixing between coaxial jets and planar shear layers. Since turbulence solutions are notoriously dependent on grid and numerical methodology, the effects of grid refinement and artificial dissipation on numerical accuracy are studied. In the latter instance, computational results obtained with several central-differenced and upwind-based formulations are compared. Based on these results, improved turbulence modes such as enhanced kappa-epsilon models as well as other two-equation formulations (e.g., kappa-omega) are being studied. In addition, validation of swirling and reacting flowfields are also currently underway.

Deshpande, Manish↗
NASA NTRS2023

Implementation, Realization and an Effective Solver of Two-Equation Turbulence Models

Currently, when the Reynolds-Averaged Navier-Stokes (RANS) equations are solved using turbulence modeling, most often the one-equation model of Spalart and Allmaras is used. Then, it is only necessary to solve the RANS equations in conjunction with a single transport equation for modeling turbulence. For this model, considerable assessment and analysis has been performed, allowing the possibility of a reliable solution method for an eddy viscosity required to compute the Reynolds stresses in the RANS equations. Such evaluation along with analysis has not been achieved to realize similar performance with two-equation models of the k-w type. The primary objective of this paper is to present and discuss the components of an effective numerical algorithm for solving the RANS equations and the two transport equations of k-w type turbulence models. All the important details of the turbulence model as actually implemented are given, which is sometimes not done in various papers considering such modeling. The viability and effectiveness of this solution algorithm are demonstrated by solving both two-dimensional and three-dimensional aerodynamic flows. In all applications, a linear rate of convergence without oscillations or other evidence of unstable behavior is observed. This behavior is also particularly true when the proposed algorithm is applied to systematically renewed mesh sequences, which is generally not observed with algorithms solving more than one transport equation. Thus, numerical integration errors are systematically reduced, allowing for a significantly more reliable assessment of the effectiveness of the turbulence model. Additionally, in this paper, analysis of the solution algorithm, including linear stability, is also performed for a particular flow problem.

Turbulence↗
NASA NTRS2014

NASA Trapezoidal Wing Simulation Using Stress-w and One- and Two-Equation Turbulence Models

The Wilcox 2006 stress-omega model (also referred to as WilcoxRSM-w2006) has been implemented in the NASA Langley code CFL3D and used to study a variety of 2-D and 3-D configurations. It predicted a variety of basic cases reasonably well, including secondary flow in a supersonic rectangular duct. One- and two-equation turbulence models that employ the Boussinesq constitutive relation were unable to predict this secondary flow accurately because it is driven by normal turbulent stress differences. For the NASA trapezoidal wing at high angles of attack, the WilcoxRSM-w2006 model predicted lower maximum lift than experiment, similar to results of a two-equation model.

Rodio, J. J.↗
NASA NTRS1992

Implementation/validation of a low Reynolds number two-equation turbulence model in the Proteus Navier-Stokes code: Two-dimensional/axisymmetric

The implementation and validation of the Chien low Reynolds number k-epsilon turbulence model in the two dimensional axisymmetric version Proteus, a compressible Navier-Stokes computer code, are presented. The set of k-epsilon equations are solved by marching in time using a coupled alternating direction implicit (ADI) solution procedure with generalized first or second order time differencing. To validate Proteus and the k-epsilon turbulence model, laminar and turbulent computations were done for several benchmark test cases: incompressible fully developed 2-D channel flow; fully developed axisymmetric pipe flow; boundary layer flow over a flat plate; and turbulent Sajben subsonic transonic diffuser flows. Proteus results from these test cases showed good agreement with analytical results and experimental data. Detailed comparisons of both mean flow and turbulent quantities showed that the Chien k-epsilon turbulence model given good results over a wider range of turbulent flow than the Baldwin-Lomax turbulence model in the Proteus code with no significant CPU time penalty for more complicated flow cases.

Bui, Trong T.↗
NASA NTRS1993

Application of a two-equation turbulence model for high speed compressible flows using unstructured grids

Application of a two-equation compressible turbulence model for practical hypersonic flows 18 presented. The solution algorithm is based on solving all of the governing equations simultaneously. Application of the solution procedure to several test cases for compressible flows show good agreement with theoretical predictions and/or other computational results. The solution procedure is employed to investigate the effects of turbulence in Type III and Type IV shock-shock interactions in hypersonic flows in association with adaptive unstructured grids. Computational results for these cases are compared with available experimental data.

Vemaganti, Gururaja R.↗
NASA NTRS2001

Two-Equation Turbulence Models for Prediction of Heat Transfer on a Transonic Turbine Blade

Two versions of the two-equation k-omega model and a shear stress transport (SST) model are used in a three-dimensional, multi-block, Navier-Stokes code to compare the detailed heat transfer measurements on a transonic turbine blade. It is found that the SST model resolves the passage vortex better on the suction side of the blade, thus yielding a better comparison with the experimental data than either of the k-w models. However, the comparison is still deficient on the suction side of the blade. Use of the SST model does require the computation of distance from a wall, which for a multiblock grid, such as in the present case, can be complicated. However, a relatively easy fix for this problem was devised. Also addressed are issues such as (1) computation of the production term in the turbulence equations for aerodynamic applications, and (2) the relation between the computational and experimental values for the turbulence length scale, and its influence on the passage vortex on the suction side of the turbine blade.

Garg, Vijay K.↗
NASA NTRS1993

Evaluation of two-equation turbulence models for predicting transitional flows

An evaluation of the capabilities and limitations of four low-Reynolds number two-equation turbulence models for predicting bypass transition on a flat plate has been conducted. The ability of these models to reproduce the effect of the free-stream turbulence on transition was tested. The strengths and deficiencies of these models have been identified systematically. It is found that the k-epsilon models are capable of predicting the qualitative aspects of transition. However, the predictions are found to be sensitive to the initial conditions. Also, the start and end of transition were found to depend on the damping functions used in the low-Reynolds number versions of the k-epsilon models.

Abid, Ridha↗
NASA NTRS1994

Three-Dimensional Navier-Stokes Simulations with Two-Equation Turbulence Models of Intersecting Shock-Waves/Turbulent Boundary Layer at Mach 8.3

An investigation of the numerical simulation with two-equation turbulence models of a three-dimensional hypersonic intersecting (SWTBL) shock-wave/turbulent boundary layer interaction flow is presented. The flows are solved with an efficient implicit upwind flux-difference split Reynolds-averaged Navier-Stokes code. Numerical results are compared with experimental data for a flow at Mach 8.28 and Reynolds number 5.3x10(exp 6) with crossing shock-waves and expansion fans generated by two lateral 15 fins located on top of a cold-wall plate. This experiment belongs to the hypersonic database for modeling validation. Simulations show the development of two primary counter-rotating cross-flow vortices and secondary turbulent structures under the main vortices and in each corner singularity inside the turbulent boundary layer. A significant loss of total pressure is produced by the complex interaction between the main vortices and the uplifted jet stream of the boundary layer. The overall agreement between computational and experimental data is generally good. The turbulence modeling corrections show improvements in the predictions of surface heat transfer distribution and an increase in the strength of the cross-flow vortices. Accurate predictions of the outflow flowfield is found to require accurate modeling of the laminar/turbulent boundary layers on the fin walls.

Bardina, J. E.↗
NASA NTRS1986

Development of low Reynolds number two equation turbulence models for predicting external heat transfer on turbine blades

A research effort was underway to study the use of two equation low Reynolds number turbulence models in predicting gas side heat transfer on turbine blades. The major objectives of this work are basicly threefold: study the predictive capabilities of two equation low Reynolds number turbulence models under the conditions characteristic of modern gas turbine blades; explore potential improvements to the models themselves as well as to the specification of initial conditions; and provide a comparison of the predictions of these models with the experimental data from a broad range of recently available turbine cascade experiments. The problems associated with predicting the boundary layer transition from laminar to turbulent flow are emphasized, as this may be the most serious deficiency of current modeling techniques. The results and conclusions of the first two phases are briefly described.

Patankar, Suhas V.↗
NASA NTRS1987

Numerical simulation of viscous transonic airfoil flows

Numerical simulations of transonic airfoil flows using the Reynolds-averaged Navier-Stokes equations and various turbulence models are presented and compared with experimental data. Three different airfoils were investigated under varying flow conditions ranging from subcritical unseparated flows to supercritical separated flows. The turbulence models investigated consisted of three zero-equation models and one two-equation model. For unseparated flows involving weak viscous-inviscid interactions, the four models were comparable in their agreement with experiment. For separated flows involving strong viscous-inviscid interactions, the nonequilibrium zero-equation model of Johnson and King gave the best overall agreement with experiment.

Coakley, Thomas J.↗