Search NASA⌕ Search

SEARCH · Search NASA

Results for “Target biasing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Evaluation of Aqua MODIS and S-NPP VIIRS Thermal Emissive Bands Calibration Stability Using Dome-C

Establishing the calibration consistency between satellite measurements is an essential step in the implementation of a long-term global monitoring plan, which often leads to sensor calibration improvements. The Suomi National Polar-Orbiting Partnership (S-NPP) Visible Infrared Imaging Radiometer Suite (VIIRS) is a polar-orbiting Earth remote sensing instrument built with a strong Moderate Resolution Imaging Spectroradiometer (MODIS) heritage. The center wavelengths of all VIIRS thermal emissive bands (TEBs) match well with those of MODIS with the exception of VIIRS TEB M15 (10.7μm). Previous work from the MODIS Characterization Support Team (MCST) at the NASA/GSFC used specific Earth surface targets to track the long-term consistency,stability, and relative bias between the two MODIS instruments onboard the Terra and Aqua satellites. Using similar methodologies, this paper evaluates the TEB calibration consistency between the MODIS instruments and S-NPP VIIRS over Dome Concordia (Dome-C). The Dome-C site is uniformly snow-covered and the atmospheric effects are small in the surrounding area. Near-surface air temperature measurements from an Automatic Weather Station (AWS) are used as a reference to track each sensor’s calibration stability and determine the relative bias between the MODIS and VIIRS instruments. The results of this study provide a quantitative assessment of the S-NPP VIIRS TEB mission-long performance.

MODIS↗
NASA NTRS1987

An application of fuzzy sets in real time filtering problems

The human decision-making task is modeled with fuzzy sets and the Kalman filter updates to the state vector are weighted using fuzzy functions. Results of the study show that the use of fuzzy set models gives results comparable to those requiring human assistance, e.g. lock on to false targets, and better results when the problem is caused by noise and/or bias, or unexpected errors in the state vector at initial acquisition.

Lea, Robert N.↗
NASA NTRS2021

Validation of SMAP L2 passive-only soil moisture products using upscaled in situ measurements collected in Twente, the Netherlands

The Twente region in the east of the Netherlands has a network with twenty soil monitoring stations that has been utilized for validation of the Soil Moisture Active/Passive (SMAP) passive-only soil moisture products. Over the period from April 2015 until December 2018, seven stations covered by the SMAP reference pixels 15 have fairly complete data records. Spatially distributed soil moisture simulations with the Dutch national hydrological model have been utilized for the development of upscaling functions to translate the spatial mean of point measurements to the domain of the SMAP reference pixels. The native and upscaled spatial soil moisture means computed using the in-situ measurements have been adopted as references to assess the performance of the SMAP i) Single Channel Algorithm at Horizontal Polarization (SCA-H), ii) Single Channel Algorithm at Vertical Polarization (SCA-V), and iii) Dual Channel Algorithm (DCA) soil moisture estimates. In the case of the Twente network it was found that the SCA-V soil moisture retrieved SMAP observations collected in the afternoon had the best agreement with the native spatial mean leading to an unbiased Root Mean Squared Error (uRMSE) of 0.059 m3 m-3, whereas for the upscaled in-situ references primarily larger biases were found. These error levels are larger than the mission’s target accuracy of 0.04 m3 m-3, which can be attributed to large over- and underestimation errors (>0.08 m3 m-3) in particular at the end of dry spells and during freezing, respectively. The strong vertical dielectric gradients associated with rapid soil freezing and wetting causes the disparity in soil depth characterized by SMAP and in situ that leads to the large mismatches. Once filtered for frozen conditions and antecedent rainfall the uRMSE improves to 0.043 m3 m-3.

Rogier van der Velde↗
NASA NTRSDate not supplied

Maneuver Reconstruction, Tracking Scheduling, and Bias Estimation in the Near Rectilinear Halo Orbit (NRHO)

NASA’s Gateway program will build a crew-tended station in an Earth-Moon Near Rectilinear Halo Orbit (NRHO) to support deep space missions to the lunar surface and heliocentric space. The station in the NRHO will be tracked by the Deep Space Network (DSN) with 2-way radiometric tracking data to produce an estimated state that is utilized to target Orbit Maintenance Maneuvers (OMMs). However, the tracking data is corrupted with measurement noise and range bias, which results in state estimation error and OMM execution error. This paper reports on analysis performed to improve the geometry of the tracking data problem with the inclusion of cross-hemispheric partner sites and explores the performance impact of handovers between partner sites and DSN sites. The OMM execution error is estimated directly using a Batch Least Squares (BLS) process, and the range bias estimation is analyzed among both original DSN sites and a combined DSN + partner sites scenario.

Clark P Newman↗
NASA NTRSDate not supplied

ILRS Analysis Activities After the Adoption of ITRF2020

"The contribution of the International Laser Ranging Service (ILRS) to the most recent realization of the International Terrestrial Reference System (ITRS) was the result of an analysis strategy with two major modifications compared to the operational products: a modeling for stations long-term systematic errors (biases reported in the ILRS Data Handling File) and an updated model of the target signature error (satellite Centre of Mass model). Both refined models were used as input information for the ILRS contribution to the ITRF2020 (International Terrestrial Reference Frame 2020). Thereafter, the ILRS Analysis Standing Committee (ASC) focused its effort on implementing the new reference frame in its operational products, define a strategy to improve the ongoing monitoring of the systematic errors, compute the ILRS contribution to the planned ITRF2020 update, and to include LARES-2 among the considered satellites for the operational products. The ILRS ASC implemented the ITRF2020/SLRF2020 into all its official operational products (TRF, Earth Orientation Parameters, predicted and combined satellite orbits) and its impact was evaluated. The operational products benefit from the continuous monitoring of the station systematic errors and the frequent updates of the Data Handling File whenever a significant change in the station systematic error is observed. In the future, a change-point detection algorithm, jointly estimating the times and the number of discontinuities, will be implemented to detect potential new discontinuities in the range bias series. The inclusion of LARES-2 among the satellites whose data are operationally analyzed will furtherly increase the robustness of the estimated parameters. Finally, the ILRS ASC activities include the benchmarking of a new analysis center (CNES) which will formally begin its own contribution in 2024."

Satellite Laser Ranging↗
NASA NTRS2004

Probe Station Antenna Range

This summer I was given the task of programming a Probe Station to collect near field antenna patterns and convert them to far field patterns. The purpose of this project is to provide NASA with another means of antenna characterizing. Currently, NASA Glenn can measure near field and far field patterns of many different types of antennas. The antennas targeted for this lab are small patch antennas at high frequencies that require probe biasing. The Probe Station contains two probes for RF signals and another two for DC Biasing. The way this lab works is as follows: A patch antenna is placed on the probe station and biased properly for testing. This antenna is known as the Antenna Under Test (AUT). The AUT is supplied with an RF signal from a probe that is connected to a network analyzer. Above the AUT hangs a probe for measuring the electric field emitted by the AUT. The probe is controlled by four axis. The axis of movements for this probe are back and forth, left and right, up and down, and rotation. The network analyzer and axis controllers are tied into a computer for reading commands and recording data. The probe scans a rectangular pattern above the AUT to measure the electric field emitted by the AUT. This data is then recorded and analyzed back at the computer.

Zaman, Afroz↗
NASA NTRS2018

Evaluation of 2-μm Pulsed Integrated Path Differential Absorption Lidar for Carbon Dioxide Measurement—Technology Developments, Measurements, and Path to Space

The societal benefits of understanding climate change through the identification of global carbon dioxide sources and sinks led to the recommendation for NASA's Active Sensing of Carbon Dioxide Emissions over Nights, Days, and Seasons space-based mission for global carbon dioxide measurements. For more than 15 years, the NASA Langley Research Center has developed several carbon dioxide active remote sensors using the differential absorption lidar technique operating at 2-μm wavelength. Recently, an airborne double-pulsed integrated path differential absorption lidar was developed, tested, and validated for atmospheric carbon dioxide measurement. Results indicated 1.02% column carbon dioxide measurement uncertainty and 0.28% bias over the ocean. Currently, this technology is progressing toward triple-pulse operation targeting both atmospheric carbon dioxide and water vapor-the dominant interfering molecule on carbon dioxide remote sensing. Measurements from the double-pulse lidar and the advancement of the triple-pulse lidar development are presented. In addition, measurement simulations with a space-based IPDA lidar, incorporating new technologies, are also presented to assess feasibility of carbon dioxide measurements from space.

Singh, Upendra N.↗
NASA NTRS1984

The Nimbus 7 ERB data set - A critical analysis

An analysis of the first year of the Nimbus 7 earth radiation budget data set reveals that there are systematic differences between wide and narrow field of view measurements. The larger differences appear in the albedo data and are due primarily to a bias introduced by the processing method. There are smaller differences, associated with the outgoing longwave radiation, which are probably due to errors in calibration. The bias in albedo originates in the factors used for converting the shortwave intensity measured at satellite altitude into a mean daily albedo at the top of the atmosphere. The factor that proves most troublesome is the one that converts measured intensity to the total instantaneous outgoing flux. That factor is determined by angular distribution models, which depend upon the type of scene within the target area. An alternative method of processing the data, which is model independent, is shown to have practically no bias and yields better over-all agreement with the wide field of view measurements.

Arking, A.↗
NASA NTRS2003

Flexor bias of joint position in humans during spaceflight

The ability to estimate ankle and elbow joint position was tested before, during, and after a 17-day spaceflight. Subjects estimated targeted joint angles during isovelocity (IsoV) joint movements with agonist muscle groups either active or relaxed. These movements included elbow extension (EE) and elbow flexion (EF), and plantarflexion (PF) and dorsiflexion (DF) of the ankle. Subjects also estimated these joint positions while moving the dynamometer at their chosen (variable) velocity (VarV) during EE and PF. For IsoV tests, no differences were observed between active and passive movements for either the ankle or elbow. Compared with those of pre-flight test days, estimates of targeted elbow joint angles were approximately 5 degrees to 15 degrees more flexed in-flight, and returned toward the pre-flight values during recovery. The spaceflight effects for the ankle were inconsistent and less prevalent than those for the elbow. The VarV PF test condition for the 120 degrees target angle at the ankle exhibited approximately 5 degrees to 7 degrees more DF target angle estimates in-flight compared with those pre- or post-flight. In contrast, during IsoV PF there was a tendency for ankle estimates to be approximately 2 degrees to 3 degrees more PF after 2-3 days exposure to spaceflight. These data indicate that during spaceflight the perception of elbow extension is greater than actuality, and are consistent with the interpretation that microgravity induced a flexor bias in the estimation of the actual elbow joint position. Moreover, these effects in joint proprioception during spaceflight were observed in individual isolated single-joint movements during tasks in which vestibular function in maintaining posture were minimal.

STS-78 Shuttle Project↗
NASA NTRS2013

A Web-Based Search Service to Support Imaging Spectrometer Instrument Operations

Imaging spectrometers yield rich and informative data products, but interpreting them demands time and expertise. There is a continual need for new algorithms and methods for rapid first-draft analyses to assist analysts during instrument opera-tions. Intelligent data analyses can summarize scenes to draft geologic maps, searching images to direct op-erator attention to key features. This validates data quality while facilitating rapid tactical decision making to select followup targets. Ideally these algorithms would operate in seconds, never grow bored, and be free from observation bias about the kinds of mineral-ogy that will be found.

hyperspectral imagery↗
NASA NTRS1984

Analysis of normalized radar cross section (sigma-O) signature of Amazon rain forest using SEASAT scatterometer data

The normalized radar cross section (NRCS) signature of the Amazon rain forest was SEASAT scatterometer data. Statistics of the measured (NRCS) values were determined from multiple orbit passes for three local time periods. Plots of mean normalized radar cross section, dB against incidence angle as a function of beam and polarization show that less than 0.3 dB relative bias exists between all beams over a range of incidence angle from 30 deg to 53 deg. The backscattered measurements analyzed show the Amazon rain forest to be relatively homogeneous, azimuthally isotropic and insensitive to polarization. The return from the rain forest target appears relatively consistent and stable, except for the small diurnal variation (0.75 dB) that occurs at sunrise. Because of the relative stability of the rain forest target and the scatterometer instrument, the response of versus incidence angle was able to detect errors in the estimated yaw altitude angle. Also, small instrument gain biases in some of the processing channels were detected. This led to the development of an improved NRCS algorithm, which uses a more accurate method for estimating the system noise power.

Bracalente, E. M.↗
NASA NTRS1982

Off-nadir antenna bias correction using Amazon rain sigma(0) data

The radar response from the Amazon rain forest was studied to determine the suitability of this region for use as a standard target to calibrate a scatterometer like that proposed for the National Oceanic Satellite System (NOSS). Backscattering observations made by the SEASAT Scatterometer System (SASS) showed the Amazon rain forest to be a homogeneous, azimuthally-isotropic, radar target which was insensitive to polarization. The variation with angle of incidence was adequately modeled as scattering coefficient (dB) = a theta b with typical values for the incidence-angle coefficient from 0.07 to 0.15 dB/deg. A small diurnal effect occurs, with measurements at sunrise being 0.5 dB to 1 dB higher than the rest of the day. Maximum-likelihood estimation algorithms presented here permit determination of relative bias and true pointing angle for each beam. Specific implementation of these algorithms for the proposed NOSS scatterometer system is also discussed.

Birrer, I. J.↗
NASA NTRS1989

Separate visual representations for perception and for visually guided behavior

Converging evidence from several sources indicates that two distinct representations of visual space mediate perception and visually guided behavior, respectively. The two maps of visual space follow different rules; spatial values in either one can be biased without affecting the other. Ordinarily the two maps give equivalent responses because both are veridically in register with the world; special techniques are required to pull them apart. One such technique is saccadic suppression: small target displacements during saccadic eye movements are not preceived, though the displacements can change eye movements or pointing to the target. A second way to separate cognitive and motor-oriented maps is with induced motion: a slowly moving frame will make a fixed target appear to drift in the opposite direction, while motor behavior toward the target is unchanged. The same result occurs with stroboscopic induced motion, where the frame jump abruptly and the target seems to jump in the opposite direction. A third method of separating cognitive and motor maps, requiring no motion of target, background or eye, is the Roelofs effect: a target surrounded by an off-center rectangular frame will appear to be off-center in the direction opposite the frame. Again the effect influences perception, but in half of the subjects it does not influence pointing to the target. This experience also reveals more characteristics of the maps and their interactions with one another, the motor map apparently has little or no memory, and must be fed from the biased cognitive map if an enforced delay occurs between stimulus presentation and motor response. In designing spatial displays, the results mean that what you see isn't necessarily what you get. Displays must be designed with either perception or visually guided behavior in mind.

Bridgeman, Bruce↗
NASA NTRS1981

Off-nadir antenna bias correction using Amazon rain forest sigma deg data

The radar response from the Amazon rain forest was studied to determine the suitability of this region for use as a standard target to calibrate a scatterometer like that proposed for the National Ocean Satellite System (NOSS). Backscattering observations made by the SEASAT-1 scatterometer system show the Amazon rain forest to be a homogeneous, azimuthally-isotropic, radar target which is insensitive to polarization. The variation with angle of incidence may be adequately modeled as sigma deg (dB) = alpha theta + beta with typical values for the incidence-angle coefficient from 0.07 dB deg to 0.15 dB/deg. A small diurnal effect occurs, with measurements at sunrise being 0.5 dB to 1 dB higher than the rest of the day. Maximum likelihood estimation algorithms are presented which permit determination of relative bias and true pointing angle for each beam. Specific implementation of these algorithms for the proposed NOSS scatterometer system is also discussed.

Birrer, I. J.↗
NASA NTRS1972

Optimum aim point biasing in case of a planetary quarantine constraint.

It is assumed that the probability of impact for each maneuver is the same, and that the aspects of orbit determination and execution errors of each maneuver affect only the targeting. An approximation of the equal probability of impact contour is derived. It is assumed that the quarantine constraint is satisfied if the aim point is not inside the impact contour. A method is devised to find on each contour the optimum aim point which minimizes the so-called bias velocity which is required to bring back the spacecraft from the biased aim point to the originally desired aim point. The method is an improvement over the approach presented by Light (1965), and Craven and Wolfson (1967).

Gedeon, G. S.↗
NASA NTRS2017

Experimental Setup for the Laboratory Investigation of Micrometeoroid Ablation Using a Dust Accelerator

A facility has been developed to simulate the ablation of micrometeoroids in laboratory conditions. An electrostatic dust accelerator is used to generate iron particles with velocities of 10-70 kilometers. The particles are then introduced into a chamber pressurized with a target gas, where the pressure is adjustable between 0.01 and 0.5 Torr, and the particle partially or completely ablates over a short distance. An array of biased electrodes above and below the ablation path is used to collect the generated ions/electrons with a spatial resolution of 2.6 centimeters along the ablating particles path, thus allowing the study of the spatiotemporal evolution of the process. For completely ablated particles, the total collected charge directly yields the ionization coefficient of a given dust material-target gas combination. The first results of this facility measured the ionization coefficient of iron atoms with N2, air, CO2, and He target gases for impact velocities greater than 20 kilometers per second, and are reported by Thomas et al. The ablation chamber is also equipped with four optical ports that allow for the detection of the light emitted by the ablating particle. A multichannel photomultiplier tube system is used to observe the ablation process with a spatial and temporal resolution of 0.64 centimeters and 90 nanoseconds. The preliminary results indicate that it is possible to calculate the velocity of the ablating particle from the optical observations, and in conjunction with the spatially resolved charge measurements allow for experimental validation of ablation models in future studies.

Thomas, Evan↗
NASA NTRS2016

Simple Parametric Model for Intensity Calibration of Cassini Composite Infrared Spectrometer Data

Accurate intensity calibration of a linear Fourier-transform spectrometer typically requires the unknown science target and the two calibration targets to be acquired under identical conditions. We present a simple model suitable for vector calibration that enables accurate calibration via adjustments of measured spectral amplitudes and phases when these three targets are recorded at different detector or optics temperatures. Our model makes calibration more accurate both by minimizing biases due to changing instrument temperatures that are always present at some level and by decreasing estimate variance through incorporating larger averages of science and calibration interferogram scans.

Brasunas, J.↗
NASA NTRS2011

A Critical Examination of Spatial Biases Between MODIS and MISR Aerosol Products - Application for Potential AERONET Deployment

AErosol RObotic NETwork (AERONET) data are the primary benchmark for evaluating satellite-retrieved aerosol properties. However, despite its extensive coverage, the representativeness of the AERONET data is rarely discussed. Indeed, many studies have shown that satellite retrieval biases have a significant degree of spatial correlation that may be problematic for higher-level processes or inverse-emissions-modeling studies. To consider these issues and evaluate relative performance in regions of few surface observations, cross-comparisons between the Aerosol Optical Depth (AOD) products of operational MODIS Collection 5.1 Dark Target (DT) and operational MODIS Collection 5.1 Deep Blue (DB) with MISR version 22 were conducted. Through such comparisons, we can observe coherent spatial features of the AOD bias while side-stepping the full analysis required for determining when or where either retrieval is more correct. We identify regions where MODIS to MISR AOD ratios were found to be above 1.4 and below 0.7. Regions where lower boundary condition uncertainty is likely to be a dominant factor include portions of Western North America, the Andes mountains, Saharan Africa, the Arabian Peninsula, and Central Asia. Similarly, microphysical biases may be an issue in South America, and specific parts of Southern Africa, India Asia, East Asia, and Indonesia. These results help identify high-priority locations for possible future deployments of both in situ and ground based remote sensing measurements. The Supplement includes a km1 file.

Shi, Y.↗