Search NASA⌕ Search

SEARCH · Search NASA

Results for “Temperature inhomogeneities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

X-ray ionization and the chemistry of the Orion molecular cloud

The collection of unusually strong stellar X-ray sources in the vicinity of the Orion molecular cloud together bathe the gas with such an intensity of X-rays that they, rather than cosmic rays, dominate the ionization and heating of the gas. Estimates of the ionization rate and the elevation in temperature are presented, and the consequences for the gas chemistry are discussed. Strong small-scale inhomogeneities in molecular abundances and temperature are a distinguishing feature of ionization by stellar X-rays.

Krolik, J. H.↗
NASA NTRS1989

Phase conjugation by four-wave mixing in inhomogeneous plasmas

The effects of density, temperature, and velocity gradients on four-wave mixing (FWM) in a plasma are investigated. A fluid model is used in which the stimulated Brillouin terms are included, but pump depletion is neglected. The steady state phase conjugate reflectivity and signal transmission coefficients are calculated and discussed for both degenerate and resonant FWM. The substantial effects of inhomogeneity on the use of FWM as a plasma diagnostic are discussed.

Williams, Edward A.↗
NASA NTRS1983

Fused silica mirror evaluation for the Shuttle Infrared Telescope Facility (SIRTF)

The SIRTF optics are intended for operation at 20 K (or less); it will be extremely inconvenient, expensive, and time consuming if it becomes necessary to accomplish all of the optical element testing, assembly, and alignment at comparable temperatures. The thermal strain behavior, including potential anisotropies and inhomogeneities, of a mirror substrate between room temperature and 20 K thus becomes a major factor in the selection of the substrate material, structural configuration, and joining methods for lightweight structures. With support from Space Projects, NASA Ames Research Center, an optical figure evaluation of a 0.65-meter, lightweight, fused silica mirror at a low-temperature goal of 20 K is being conducted. The design details of a thermal shroud, provisions for extracting heat from the low-conductivity mirror, and wavefront error sources other than the mirror surface are discussed and preliminary test results presented.

Barnes, W. P., Jr.↗
DOE OSTI2021

Greater committed warming after accounting for the pattern effect

Our planet’s energy balance is sensitive to spatial inhomogeneities in sea surface temperature and sea ice changes, but this is typically ignored in climate projections. Here, we show the energy budget during recent decades can be closed by combining changes in effective radiative forcing, linear radiative damping and this pattern effect. The pattern effect is of comparable magnitude but opposite sign to Earth’s net energy imbalance in the 2000s, indicating its importance when predicting the future climate on the basis of observations. Additionally, after the pattern effect is accounted for, the best-estimate value of committed global warming at present-day forcing rises from 1.31 K (0.99–2.33 K, 5th–95th percentile) to over 2 K, and committed warming in 2100 with constant long-lived forcing increases from 1.32 K (0.94–2.03 K) to over 1.5 K, although the magnitude is sensitive to sea surface temperature dataset. Further constraints on the pattern effect are needed to reduce climate projection uncertainty.

58 GEOSCIENCES↗
DOE OSTI2023

Increasing Extractable Work in Small Qubit Landscapes

An interesting class of physical systems, including those associated with life, demonstrates the ability to hold thermalization at bay and perpetuate states of high free-energy compared to a local environment. In this work we study quantum systems with no external sources or sinks for energy, heat, work, or entropy that allow for high free-energy subsystems to form and persist. We initialize systems of qubits in mixed, uncorrelated states and evolve them subject to a conservation law. We find that four qubits make up the minimal system for which these restricted dynamics and initial conditions allow an increase in extractable work for a subsystem. On landscapes of eight co-evolving qubits, interacting in randomly selected subsystems at each step, we demonstrate that restricted connectivity and an inhomogeneous distribution of initial temperatures both lead to landscapes with longer intervals of increasing extractable work for individual qubits. We demonstrate the role of correlations that develop on the landscape in enabling a positive change in extractable work.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

High-voltage AlN Schottky barrier diodes on bulk AlN substrates by MOCVD

Abstract This letter reports the demonstration of Aluminum nitride (AIN) Schottky barrier diodes on bulk AlN substrates by metalorganic chemical vapor phase deposition with breakdown voltages exceeding 3 kV. The devices exhibited good rectifying characteristics with ON/OFF ratios of 10 6 –10 8 and excellent thermal stability from 298 to 623 K. The device Schottky barrier height increased from 0.89 to 1.85 eV, and the ideality factor decreased from 4.29 to 1.95 with increasing temperature, ascribed to the inhomogeneous metal/AlN interface. This work demonstrates the potential of AlN as an ultra-wide bandgap semiconductor for developing multi-kV AlN high-voltage and high-power devices.

Physics↗
NASA NTRS1982

OI and OIII in Sgr A - Neutral and ionized gas at the galactic center

Measurements of the 63 micron O I fine structure line displayed by the galactic center were made with an LHe-cooled tandem scanned Fabry-Perot spectrometer. Data were taken from 10 positions in 40 arcsec steps along and perpendicular to the galactic plane. A peak intensity of within 0.5 of 1.5 x 10 to the -16th W/sq cm was calculated, while an 88 micron O III had an intensity of within 2 of 7 x 10 to the -18th W/sq cm on the same beam. The O I emission was spread over 4 arcmin along and 2.6 arcmin perpendicular to the galactic plane. The velocity centroids were blueshifted south of center and redshifted to the north, data indicating either large-scale excitation or kinematic inhomogeneities. A peak brightness temperature of the O I line was 130 K, i.e., a lower limit for excitation of O I. Finally, an electron density of more than 1000/cu cm was calculated.

Genzel, R.↗
NASA NTRS1986

Methods for the solution of radiative transfer equation

To obtain an exact solution of the radiative-transfer equation in media where both absorption and scattering are significant, the usual approach is to use a numerical method. Three methods are known in the literature: invariant imbedding, eigenvalue-eigenfunction, and matrix doubling. This paper examines the practical application of these methods to the problem of emission from an inhomogeneous (Rayleigh) layer, the effects of layer parameters on the stability. It is found that invariant imbedding is most suitable for computing emission from an inhomogeneous layer with a temperature profile but tends to be unstable as the optical thickness of the layer increases beyond 0.5. On the other hand, the matrix-doubling method is stable for arbitrary optical thickness but is not suitable for handling multilayers. The eigenvalue-eigenfunction method is more stable than the invariant imbedding as optical thickness increases up to 2.0. It also permits temperature profile in the layer, but the computation is much more complicated. It is less stable than the matrix-doubling method when optical thickness is larger than 2.0. In general, the choice of a method is dependent on the nature of the problem.

Chen, M. F.↗
NASA NTRS1989

Thermal characteristics of mountain desert terrain derived from thermal infrared multispectral scanner measurements

The spatial and temporal variability of mountain-desert territory thermal is examined with an airborne thermal infrared multispectral scanner (TIMS). The purpose of the study is to demonstrate that inhomogeneities of the surface temperatures in the area can be adequately large to influence mesoscale circulations and the turbulence characteristics of boundary-layer flow. Ground truth measurements are compared to the TIMS imagery, with focus placed on the thermal infrared sensitivity to wet and dry soils, terrain elevation, and soil type. The results indicate that variations in the thermal features are dependent on soil type and soil moisture, and that the dependence on surface radiative temperatures on terrain elevation is apparent in daytime measurements.

Astling, E. G.↗
NASA NTRS2000

Thermal Control and Enhancement of Heat Transport Capacity of Two-Phase Loops With Electrohydrodynamic Conduction Pumping

There are three kinds of electrohydrodynamics (EHD) pumping based on Coulomb force: induction pumping, ion-drag pumping, and pure conduction pumping. EHD induction pumping relies on the generation of induced charges. This charge induction in the presence of an electric field takes place due to a non-uniformity in the electrical conductivity of the fluid which can be caused by a non-uniform temperature distribution and/or an inhomogeneity of the fluid (e.g. a two-phase fluid). Therefore, induction pumping cannot be utilized in an isothermal homogeneous liquid. In order to generate Coulomb force, a space charge must be generated. There are two main mechanisms for generating a space charge in an isothermal liquid. The first one is associated with the ion injection at a metal/liquid interface and the related pumping is referred to as ion-drag pumping. Ion-drag pumping is not desirable because it can deteriorate the electrical properties of the working fluid. The second space charge generation mechanism is associated with the heterocharge layers of finite thickness in the vicinity of the electrodes. Heterocharge layers result from dissociation of the neutral electrolytic species and recombination of the generated ions. This type of pumping is referred to as pure conduction pumping. This project investigates the EHD pumping through pure conduction phenomenon. Very limited work has been conducted in this field and the majority of the published papers in this area have mistakenly assumed that the electrostriction force was responsible for the net flow generated in an isothermal liquid. The main motivation behind this study is to investigate an EHD conduction pump for a two-phase loop to be operated in the microgravity environment. The pump is installed in the liquid return passage (isothermal liquid) from the condenser section to the evaporator section. Unique high voltage and ground electrodes have been designed that generate sufficient pressure heads with very low electric power requirements making the EHD conduction pumping attractive to applications such as two-phase systems (e.g. capillary pumped loops and heat pipes). Currently, the EHD conduction pump performance is being tested on a two-phase loop under various operating conditions in the laboratory environment. The simple non-mechanical and lightweight design of the EHD pump combined with the rapid control of performance by varying the applied electric field, low power consumption, and reliability offer significant advantages over other pumping mechanisms; particularly in reduced gravity applications.

Seyed-Yagoobi, J.↗
NASA NTRS2003

Kinetic Simulation of Inhomogeneous Plasma with a Variable Sized Grid System

Space plasmas are usually inhomogeneous and irregular. Particle in cell (PIC) plasma simulations, however, often consider the plasma to be homogeneous and periodic. Here non-periodic PIC simulations with inhomogeneities in the density, temperature and background magnetic field are considered. Boundary conditions and a variable sized grid system are discussed, along with an application to a magnetospheric plasma physics problem in the auroral zone.

Schriver, David↗
DOE OSTI2021

Temperature evolution of the phonon dynamics in the Kitaev spin liquid

In this work, we present a study of the phonon dynamics in the honeycomb Kitaev spin model at finite temperatures. We show that the fractionalized spin excitations of the Kitaev spin liquid, the itinerant Majorana fermions, and static Z 2 fluxes have distinct effects on the phonon dynamics, which makes the phonon dynamics a promising tool for exploring the Kitaev spin liquid candidate materials. In particular, we focus on the signature of the fractionalized excitations in the thermodynamic behavior of the sound attenuation and the phonon Hall viscosity: the former describes the phonon decay into the fractionalized excitations, and the latter is the leading order time-reversal symmetry breaking effect on the acoustic phonon. We find that the angular dependence of the attenuation coefficient and its magnitude is modified by the thermal excitation of the Z 2 fluxes. The strength of this effect strongly depends on the relative magnitude of the sound velocity and the Fermi velocity characterizing the low-energy Majorana fermions. We also show that the Hall viscosity is strongly suppressed by the increase of the density of the Z 2 fluxes at finite temperatures. All these observations reflect the effects of the emergent disorder on the Majorana fermions introduced by the Z 2 fluxes. Our analysis is based on the complementary analytical calculations in the low-temperature zero-flux sector, and numerical calculations in the inhomogeneous flux sectors at intermediate and high temperatures with stratified Monte Carlo (strMC) method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Compositional inhomogeneity and its effect on the hardness of nanostructured refractory high-entropy alloys

The pronounced compositional inhomogeneity observed in refractory high-entropy alloys (HEAs), as opposed to non-refractory HEAs, has an important influence on their mechanical properties, thereby posing a significant challenge for the development of high-performance refractory HEAs. In this work, by combining transmission electron microscopy imaging, chemical analysis, and nano-hardness tests, we investigate the compositional inhomogeneities in a series of sintered nanostructured HEAs and elucidate their influence on the material's hardness. Further, we reveal that the compositional inhomogeneity of the sintered nanostructured HEAs is temperature- and component- dependent. By correlating the hardness of nanostructured HEAs to the evolving compositional inhomogeneity, our work demonstrates that the compositional inhomogeneity in nanostructured HEAs can be tuned by sintering temperature or alloying towards optimized microstructure and hardness.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
NASA NTRS1991

The photosphere as a radiative boundary

The present characterization of the solar photosphere as a radiative boundary for the solar interior gives attention to both semiempirical and a priori models for the structure of emergent radiation, and emphasizes that any discussion of photospheric structures smaller than 300 km is easily compromised by the radiant integration over such scale lengths. Plane-parallel modes have indicated that Boltzmann-Saha statistics are largely valid over the photosphere save within 100 km of the temperature minimum. An evaluation is made of observational evidence for horizontal inhomogeneities and such characteristics as granular and temperature minimum region fluctuations, as well as the recent demonstration of relatively cold CO-absorbing regions.

Anderson, Lawrence S.↗
NASA NTRS1998

3-D Modeling of Directional Solidification of a Non-Dilute Alloy with Temperature and Concentration Fields Coupling via Materials Properties Dependence and via Double Diffusive Convection

Numerical simulation of the HgCdTe growth by the vertical Bridgman method was performed using FIDAP finite element code. Double-diffusive melt convection is analyzed, as the primary factor at controls inhomogeneity of the solidified material. Temperature and concentration fields in the model are also coupled via material properties, such as thermal and solutal expansion coefficients with the dependence on both temperature and concentration, and melting temperature evaluation from pseudobinary CdTe-HgTe phase diagram. Experimental measurements were used to obtain temperature boundary conditions. Parametric study of the melt convection dependence on the gravity conditions was undertaken. It was found, that the maximum convection velocity in the melt can be reduced under certain conditions. Optimal conditions to obtain a near flat solidified interface are discussed. The predicted interface shape is in agreement with one obtained experimentally by quenching. The results of 3-D calculations are compared with previous 2- D findings. A video film featuring 3-D melt convection will be presented.

Bune, Andris V.↗
NASA NTRS1996

Turbulent flame propagation in partially premixed flames

Turbulent premixed flame propagation is essential in many practical devices. In the past, fundamental and modeling studies of propagating flames have generally focused on turbulent flame propagation in mixtures of homogeneous composition, i.e. a mixture where the fuel-oxidizer mass ratio, or equivalence ratio, is uniform. This situation corresponds to the ideal case of perfect premixing between fuel and oxidizer. In practical situations, however, deviations from this ideal case occur frequently. In stratified reciprocating engines, fuel injection and large-scale flow motions are fine-tuned to create a mean gradient of equivalence ratio in the combustion chamber which provides additional control on combustion performance. In aircraft engines, combustion occurs with fuel and secondary air injected at various locations resulting in a nonuniform equivalence ratio. In both examples, mean values of the equivalence ratio can exhibit strong spatial and temporal variations. These variations in mixture composition are particularly significant in engines that use direct fuel injection into the combustion chamber. In this case, the liquid fuel does not always completely vaporize and mix before combustion occurs, resulting in persistent rich and lean pockets into which the turbulent flame propagates. From a practical point of view, there are several basic and important issues regarding partially premixed combustion that need to be resolved. Two such issues are how reactant composition inhomogeneities affect the laminar and turbulent flame speeds, and how the burnt gas temperature varies as a function of these inhomogeneities. Knowledge of the flame speed is critical in optimizing combustion performance, and the minimization of pollutant emissions relies heavily on the temperature in the burnt gases. Another application of partially premixed combustion is found in the field of active control of turbulent combustion. One possible technique of active control consists of pulsating the fuel flow rate and thereby modulating the equivalence ratio (Bloxsidge et al. 1987). Models of partially premixed combustion would be extremely useful in addressing all these questions related to practical systems. Unfortunately, the lack of a fundamental understanding regarding partially premixed combustion has resulted in an absence of models which accurately capture the complex nature of these flames. Previous work on partially premixed combustion has focused primarily on laminar triple flames. Triple flames correspond to an extreme case where fuel and oxidizer are initially totally separated (Veynante et al. 1994 and Ruetsch et al. 1995). These flames have a nontrivial propagation speed and are believed to be a key element in the stabilization process of jet diffusion flames. Different theories have also been proposed in the literature to describe a turbulent flame propagating in a mixture with variable equivalence ratio (Muller et al. 1994), but few validations are available. The objective of the present study is to provide basic information on the effects of partial premixing in turbulent combustion. In the following, we use direct numerical simulations to study laminar and turbulent flame propagation with variable equivalence ratio.

Poinsot, T.↗
NASA NTRS2001

Theory and Simulation of Self- and Mutual-Diffusion of Carrier Density and Temperature in Semiconductor Lasers

Carrier diffusion and thermal conduction play a fundamental role in the operation of high-power, broad-area semiconductor lasers. Restricted geometry, high pumping level and dynamic instability lead to inhomogeneous spatial distribution of plasma density, temperature, as well as light field, due to strong light-matter interaction. Thus, modeling and simulation of such optoelectronic devices rely on detailed descriptions of carrier dynamics and energy transport in the system. A self-consistent description of lasing and heating in large-aperture, inhomogeneous edge- or surface-emitting lasers (VCSELs) require coupled diffusion equations for carrier density and temperature. In this paper, we derive such equations from the Boltzmann transport equation for the carrier distributions. The derived self- and mutual-diffusion coefficients are in general nonlinear functions of carrier density and temperature including many-body interactions. We study the effects of many-body interactions on these coefficients, as well as the nonlinearity of these coefficients for large-area VCSELs. The effects of mutual diffusions on carrier and temperature distributions in gain-guided VCSELs will be also presented.

Li, Jian-Zhong↗