Search NASA⌕ Search

SEARCH · Search NASA

Results for “Thermodynamic Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Thermodynamic modeling of CsF with LiF-NaF-KF for molten fluoride-fueled reactors

Gibbs energy models were developed to describe the thermochemical behavior of CsF in molten FLiNaK (46.5LiF-11.5NaF-42KF mol%), a proposed molten salt reactor (MSR) fuel solvent and coolant, as cesium is of concern due to its high radiotoxicity and volatility. Initially, it was necessary to obtain a more accurate Gibbs energy function for CsF which required fitting parameters to reported vapor pressures over condensed phase CsF. The pseudo-binary systems CsF-LiF, CsF-NaF and CsF-KF were then evaluated utilizing phase equilibria and enthalpy of mixing (Δ mix H) values, together with original differential scanning calorimetry (DSC) measurements performed for the CsF-LiF and CsF-KF systems. The CsF-LiF-NaF, CsF-LiF-KF and CsF-NaF-KF pseudo-ternary system representations were obtained by interpolation of the constituent pseudo-binary systems, with DSC measurements performed for the CsF-LiF-NaF system to corroborate the calculated liquidus temperature. Ultimately, the pseudo-ternary systems were interpolated to obtain Gibbs energy models for the pseudo-quaternary CsF-LiF-NaF-KF system, supported by DSC measurements at low CsF compositions (1–10 mol%), yielding computed equilibria and cesium-containing vapor pressures that compare favorably with reported values. In conclusion, the Molten Salt Thermal Properties Database – Thermochemical (MSTDB-TC) was subsequently expanded to include these Gibbs energy models allowing description of the thermochemical behavior of the CsF-LiF-NaF-KF system.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Thermodynamic Modeling of Intrinsic Defects in MnBi₂Te₄

This repository contains the computational data supporting the manuscript titled “The critical role of intrinsic defects and many-body interactions on the stability of MnBi₂Te₄.” It includes: 1. DFT data generated using VASP, used for training and benchmarking electronic structure models. 2. Quantum Monte Carlo (QMC) data produced with QMCPACK, used to apply many-body corrections and validate the electronic and magnetic properties of MnBi₂Te₄. 3. Relevant scripts used to run, analyze, and process the calculations, enabling reproducibility and transparency of the workflows.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A thermodynamic model of integrated liquid-to-liquid thermoelectric heat pump systems

Thermoelectric (TE) heat pumps (TEHPs) are advantageous for heating and cooling in various applications because of their modularity and simple design. A TEHP system includes the TE modules with p- and n-type materials bonded to substrates, plus heat exchangers, thermal interfaces to the heat exchangers, and heat transfer fluids. Although modeling an individual TE module has been extensively studied, limited studies have reported performance at the larger system-level. Furthermore, no prior study has addressed the impact of temperature-dependent TE material properties (e.g., electric resistivity, thermal conductivity, and Seebeck coefficient) on overall heat-pump-system-level performance. Here, this work presents a mathematical model for TEHP system performance based on Goldsmid's approach for TE material performance, “effective” TE material properties, Gnielinski's correlation for convective heat transfer, and thermal balance theory for a heat exchange network. This combined approach provides an accurate model of the liquid-to-liquid TEHP system. Three different approaches—one empirical, one based on the manufacturer's specifications, and one drawn from the literature—were then used to determine values for TE material properties. The first two methods treated properties as constants, while the last approach treated properties as surface-temperature-based functions. Finally, experimental TEHP data was used to validate the models, all with relative absolute deviations of approximately 10% when predicting heating capacity and 10%–25% when forecasting cooling capacity up to a 30 K surface temperature lift. The results demonstrated that, at the TEHP system level, the TE material properties could be treated as constants, avoiding solver iterations and reducing the performance uncertainty by up to 95%.

42 ENGINEERING↗
DOE OSTI2025

Development of a kinetic-thermodynamic model for lime-stabilization of Na-bentonite

This study presents the first kinetic model to predict the solid and pore solution composition of Na-bentonite clay reacting with slaked lime over a period of 720 days. The model successfully accounts for most experimental data using a single kinetic rate constant. The following sequence of reactions was predicted by the model: initial rapid dissolution of portlandite within the first 7 days, leading to a decrease in pH and dissolved calcium, and concurrent formation of calcium silicate hydrates (C-S-H: jennite), calcium aluminate hydrate (C-A-H: C₄AH₁₃), calcium aluminosilicate hydrates (stratlingite) and hydrotalcite. After 7 days, jennite and stratlingite are predicted to transform into tobermorite-II, contributing to strength development up to 28 days. From 28 to 90 days, continued montmorillonite dissolution is predicted, along with minor formation of ettringite, partial tobermorite-II dissolution, and precipitation of secondary phases such as albite and talc. Experimentally, portlandite dissolution was confirmed by TGA and XRD and found to be complete within 7 days, in agreement with model predictions. However, other predicted solid-phase transformations (e.g., tobermorite-II formation and dissolution, ettringite, albite, and talc formation) could not be conclusively verified through experimental techniques. Aqueous phase measurements confirmed that the pH and Ca trends in solution, and that equilibrium was reached by 90 days.

Chemical kinetics↗
DOE OSTI2023

Uranium Nitride as LWR TRISO Fuel: Thermodynamic Modeling of U-C-N and Thermomechanics

A new concept for light water reactor (LWR) nuclear fuel has recently been proposed that utilizes pellets of tristructural isotropic (TRISO) fuel particles embedded in a SiC or zirconium alloy matrix, replacing sintered urania pellets. The fuel is considered significantly more accident tolerant than urania as the SiC matrix or coated/protected zirconium alloy and TRISO particles would be highly resistant to oxidation and fission product release under beyond-design-basis accident conditions. As is well understood, failed fuel rods release gaseous and volatile fission products, and that is greatly exacerbated as urania oxidizes from UO 2+x to higher oxidations states in failed fuel pin with resulting expansion, loss of integrity, and significant further release of fission products.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Complete Optimization of LPBF Ni-Based Alloys Down-Selected from FY23 Candidate Materials Including, Thermodynamic Modeling, Sample Fabrication and Microstructure Characterization

The goal of the Advanced Materials and Manufacturing Technologies (AMMT) program is to accelerate the incorporation of new materials and manufacturing technologies into advanced nuclear-related systems. Although 316H stainless steel fabricated by laser powder bed fusion (LPBF) has already been identified as an alloy that could have a significant effect on various reactor technologies, many other materials and manufacturing techniques are being evaluated. Nickel-based alloys typically offer higher-temperature capabilities compared with advanced stainless steels, and previous reports looked at three Ni-based alloy categories: low-Co alloys with a potential use close to the reactor core; high-temperature, high-strength alloys; and molten salt–compatible alloys. In the first category, alloy 718 was studied in 2023, and creep testing at 600°C and 650°C revealed that the alloy exhibited great creep strength after the appropriate annealing but had low ductility. Advanced characterization was recently conducted to highlight the presence of strengthening γ' and γ" precipitates after creep testing and to show that brittle phases at grain boundaries might explain the low ductility of LPBF 718 compared with wrought 718. For the high-temperature, high-strength alloys, previously purchased powders of alloys 617, 230, and 625 were used to assess the printability of these three solution-strengthened alloys. Hot cracking could not be suppressed for alloy 617 and 230, and it was shown that these cracks, which were elongated along the build direction (BD), had a drastic effect on the ductility of alloy 230 at room temperature when specimens were machined perpendicular to the BD. On the contrary, LPBF printing of crack-free alloy 625 was achieved using similar printing parameters, and the alloy looked like a promising candidate for various reactor technologies. The fabrication of alloy 282 by LPBF, a γ'-strengthened alloy with great creep strength up to 800°C, was performed in 2023, and x-ray computed tomography (XCT) scans of the alloy before and after creep testing at 750°C were carried out to assess the effect of flaws on the alloy’s creep behavior. Correlation between the flaws’ volume fraction, creep ductility, and creep lifetime could be established, and future work on LPBF 625 will take full advantage of in situ printing data and ex situ XCT scans to accelerate the alloy qualification. Finally, single track experiments were performed on the two alloys previously identified as good molten salt–resistant, Ni-based candidates: Hastelloy N and 244. Various laser parameters were considered, and cracking was not observed for either of the two alloys. Wrought 244 offers better creep strength and molten salt compatibility than alloy 625, and future work will aim to establish the alloy LPBF processing window.

36 MATERIALS SCIENCE↗