Search NASA⌕ Search

SEARCH · Search NASA

Results for “Thermodynamic systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Coupled confined phase behavior and transport of methane in slit nanopores

The proximity of the order of magnitude molecular mean free path and pore sizes in nanopores leads to remarkable interactions between molecules and walls. In such systems, the thermodynamic property and the transport behavior of fluids deviate from those at bulk conditions. Molecular dynamics (MD) simulation may be used to investigate the effects of confinement on fluid physics in nanosize pores. However, translating these subscale observations into a larger scale of interest remains a challenging task. In this work, we propose a modified extension of Peng-Robinson equation of state (PR-EOS) motivated and guided by MD simulation results. The shift of critical properties, i.e., pressure and temperature, are evaluated independently. A temperature dependent parameter is introduced to account for the existence of capillary pressure in the two-phase region. Here, this formulation is capable of capturing the shift in critical properties as well as density phase diagrams under various confinement scenarios. We incorporate the proposed EOS in the lattice Boltzmann method (LBM) to study coupled confined phase behavior and transport of methane in nano-size slit pores. Adsorptive strength is determined such that the resulting density ratio matches that from MD simulation. Results indicate that the use of the proposed EOS leads to smaller fluid velocities compared to PR-EOS. This effect is due to stronger interactions between fluid particles under confinement. Also, results show that transport characteristics are impacted by the pressure of the system: in systems with a relatively low pressure, transport seems to be dominated by Knudsen diffusion; however, at a higher pressure, the contribution from viscous flow increases as the pore widens while the influence of Knudsen and surface diffusion diminishes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

On numerical energy conservation for an implicit particle-in-cell method coupled with a binary Monte-Carlo algorithm for Coulomb collisions

We report conventional particle-in-cell (PIC) methods suffer from enhanced numerical heating (explicit PIC) or cooling (semi-implicit PIC) when coupled with a binary Monte-Carlo algorithm for Coulomb collisions. In this work, a fully-implicit θ-PIC scheme (with adjustable time-biasing parameter 1/2 ≤ θ ≤) is considered. The discrete change in energy of a closed system after a time step for this scheme scales with (1/2 - θ)C θ , where C θ is a positive definite quantity that depends on the frequency spectrum of the energy in the fields. Collisions lead to additional energy in the field fluctuations associated with high-frequency light waves produced by a numerical Bremsstrahlung process, which can result in a large increase in the numerical cooling rate for θ > 1/2. However, for θ = 1/2, energy is exactly conserved. The energy in the field fluctuations on long time scales agrees with that calculated using the equipartition theorem for a classical system in thermodynamic equilibrium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Maximum Entropy Theory of Multiscale Coarse-Graining via Matching Thermodynamic Forces: Application to a Molecular Crystal (TATB)

The MSCG/FM (multiscale coarse-graining via force-matching) approach is an efficient supervised machine learning method to develop microscopically informed coarse-grained (CG) models. Here we present a theory based on the principle of maximum entropy (PME) enveloping the existing MSCG/FM approaches. This theory views the MSCG/FM method as a special case of matching the thermodynamic forces from the extended ensemble described by the set of thermodynamic (relevant) system coordinates. This set may include CG coordinates, the stress tensor, applied external fields, and so forth, and may be characterized by nonequilibrium conditions. Following the presentation of the theory, we discuss the consistent matching of both bonded and nonbonded interactions. The proposed PME formulation is used as a starting point to extend the MSCG/FM method to the constant strain ensemble, which together with the explicit matching of the bonded forces is better suited for coarse-graining anisotropic media at a submolecular resolution. The theory is demonstrated by performing the fine coarse-graining of crystalline 1,3,5-triamino-2,4,6-trinitrobenzene (TATB), a well-known insensitive molecular energetic material, which exhibits highly anisotropic mechanical properties.

1,3,5-triamino-2,4,6-trinitrobenzene↗
DOE OSTI2020

Magnetic reconnection and kinetic waves generated in the Earth's quasi-parallel bow shock

Magnetic reconnection in quasi-parallel shocks, relevant to the Earth’s bow shock, is studied by means of two-dimensional full particle-in-cell simulations. As the Alfvénic Mach number increases, the propagation direction of the waves excited in the transition region changes, and the shock becomes more turbulent with more reconnection sites. In the higher Mach number shock, abundant electron-only reconnection sites are generated with scales on the order of the ion skin depth or less. Non-reconnecting current sheets can also generate electron jets and energy dissipation can occur there as well. However, non-reconnecting current sheets with the magnetic field reversal typically show a smaller energy dissipation rate than reconnecting current sheets. In the shock transition region, two types of waves are responsible for driving reconnection: one has a wavelength around three ion skin depths (d i ), and the other has a wavelength less than 1 d i . Here, electron and ion distribution functions show that in regions where the former type of waves is excited, there are two ion beams and a single-peaked electron distribution. In contrast, in regions where the latter type of waves is excited, there are multiple electron and ion beams. The waves propagating obliquely to the magnetic field bend the magnetic field lines, and magnetic reconnection occurs where oppositely directed field lines come into contact.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Ice phonon spectra and Bayes inference: A gateway to a new understanding of terahertz sound propagation in water

Understanding how molecules engage in collective motions in a liquid where a network of bonds exists has both fundamental and applied relevance. On the one hand, it can elucidate the “ordering” role of long-range correlations and inspire new avenues to control such order to implement sound manipulation. Water represents an ideal investigation case to unfold these general aspects, and, across the decades, it has been the focus of thorough scrutiny. Further, despite this investigative effort, the spectrum of terahertz density fluctuations of water largely remains a puzzle for condensed matter physicists. To unravel it, we compare previous scattering measurements of water spectra with new ones on ice. Owing to the unique asset of Bayesian inference, we draw a more detailed portrayal of the phonon response of ice. The comparison with the one of liquid water challenges the current understanding of density fluctuations in water, or more in general, of any networked liquid.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Free energy and specific heat near a quantum critical point of a metal

We analyze the free energy and the specific heat for fermions interacting with a gapless boson at a quantum-critical point (QCP) in a metal. We use the Luttinger-Ward-Eliashberg formula for the free energy in the normal state, which includes contributions from bosons, fermions, and their interaction, all expressed via fully dressed fermionic and bosonic propagators. The sum of the last two contributions is the free energy F γ of an effective low-energy model of fermions with boson-mediated dynamical 4-fermion interaction V(Ω m ) ∝ 1/|Ω m | γ (the γ model). This purely electronic model has been used to analyze the interplay between non-Fermi liquid behavior and pairing near a QCP, which are both independent of the upper energy cutoff Λ. However, the specific heat C γ (T), obtained from F γ , does depend on Λ. We argue that this dependence is spurious and cancels out, once we include the contribution from bosons. We further argue that the full C(T) is the sum of the contribution from free fermions and the one from a critical boson, with the fully dressed propagator, other terms cancel out. We compare the full C(T) with the C γ (T), obtained using recently proposed regularization of F γ . We argue that for γ < 1, the full C(T) and the regularized C γ (T) differ by a γ-dependent prefactor, while for γ > 1, the full C(T) and C γ (T) differ by the positive contribution from free massless fermions (a positive constant for the electron-phonon case γ = 2). For these γ, C γ (T) is negative, but the full C(T) is positive. We argue that only the full C(T) matters as the positive and the negative contributions originate from the term in C(T) which contains the fully dressed bosonic propagator. Here, we then argue that the normal state remains stable until the pairing instability develops.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Agent-based modeling and simulation for the circular economy: Lessons learned and path forward

Circular economy aims at decoupling human activities from resource use and creating wealth. However, many have questioned the link between increased circularity and sustainability, resulting in several methodological approaches being developed to answer that question. This article analyzes and discusses the insights gained from applying agent-based modeling and simulation to study the techno-economic and social conditions promoting circularity and sustainability. This article analyzes the benefits and limitations of this technology and discusses future methodology developments within the circular economy context. Moreover, six limits of the circular economy concept are used to interpret insights from the literature: thermodynamic limits, system boundary limits, limits posed by the physical scale of the economy, limits posed by path dependencies and lock-in, limits of governance and management, and limits of social and cultural definitions. Promising research avenues are to use this methodology with machine learning, industrial ecology methods, and detailed geographic information.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Performance Evaluation and Optimal Design Analysis of Continuous-Operation Solar-Driven Cooling Absorption Systems With Thermal Energy Storage

A solar absorption cooling system consisting of a flat plate collector, thermal energy storage tank, and absorption chiller is analyzed in this work. A dimensionless model is developed from the energy balance on each component and the chiller's characteristic performance curves. The model is used to determine the interaction and influence of different parameters such as tank size, solar collector area, chiller size, cooling load, cooling temperature, heat loss, and mass flow rates on the performance. From the analysis, smaller solar collector areas are required for lower cooling loads and smaller tank volumes. A specific cooling load of 1 x 10^-5 will require a specific solar collector area between two and six times larger, depending on the initial tank temperature, than the area required for a baseline system that considers typical commercial design and operation parameters. A similar behavior was observed for the specific tank volume. For the baseline system, the minimum specific area of the collector of 9.57 is achieved for an initial tank temperature of 1.19. For a cooling load of 1 x 10^-5, the optimum initial tank temperature will be 1.11 that results in a minimum specific solar collector area of 25.26. A specific tank volume of 4 x 10^-4 will also have an optimum initial tank temperature of 1.11 that minimizes the specific solar collector area to a value of 28.18. The approach and analysis in this work can be used to determine design parameters for solar absorption cooling systems based on a proper relation among system's dimensions to achieve optimum operation.

cooling load↗
DOE OSTI2020

Electron Energy Partition across Interplanetary Shocks. III. Analysis

An analysis of model fit results of 15,210 electron velocity distribution functions (VDFs), observed within ±2 hr of 52 interplanetary (IP) shocks by the Wind spacecraft near 1 au, is presented as the third and final part on electron VDFs near IP shocks. The core electrons and protons dominate in the magnitude and change in the partialto-total thermal pressure ratio, with the core electrons often gaining as much or more than the protons. Only a moderate positive correlation is observed between the electron temperature and the kinetic energy change across the shock, while weaker, if any, correlations were found with any other macroscopic shock parameter. No VDF parameter correlated with the shock normal angle. The electron VDF evolves from a narrowly peaked core with flaring suprathermal tails in the upstream to either a slightly hotter core with steeper tails or much hotter flattop core with even steeper tails downstream of the weaker and strongest shocks, respectively. Both quasi-static and fluctuating fields are examined as possible mechanisms modifying the VDF, but neither is sufficient alone. For instance, flattop VDFs can be generated by nonlinear ion acoustic wave stochastic acceleration (i.e., inelastic collisions), while other work suggested they result from the combination of quasi-static and fluctuating fields. This three-part study shows that not only are these systems not thermodynamic in nature; even kinetic models may require modification to include things like inelastic collision operators to properly model electron VDF evolution across shocks or in the solar wind.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Recent Advancements and Prospects of Chemical Heat Pumps for Temperature Amplification for Nuclear Process Heat Applications

The energy economy is continually evolving, particularly in terms of primary energy sources, their conversions to useful forms such as electricity and heat, and their utilization in different sectors, in response to socio-political factors. Because nuclear energy source is a clean and non-carbon-emitting energy source, it is crucial to consider its role in the evolution of the energy economy. Integrated Energy Systems (IES) are collaboratively controlled systems that can dynamically apportion thermal and/or electrical energy to promote the production of various energy products and have the potential to reduce greenhouse gas (GHG) emissions, improve energy efficiency, improve electrical grid dependability, and enhance energy economics. To realize the benefits of IES with the current reactor fleets, selection and development of a complimentary temperature upgrading technology are necessary for providing process heat and improving economics.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Energy Efficient, Cost-Effective Power and Co-Generation Technologies: Techno-Environmental Analysis

Development of energy solutions for addressing grid resiliency and energy efficiency while lowering greenhouse gas emissions is critical in today’s energy scenario. Chemical energy provides on demand power. Cogeneration technologies offer numerous benefits in meeting the growing energy demand while lowering the impact on environment. Utilization of waste heat from prime movers in conjunction with energy efficient heat pumps and renewable photovoltaics is an attractive approach. Efficient utilization of available resources to support current and future building energy needs targeting grid resiliency, energy and environmental security via co-generation approaches is the focus of this study. A detailed techno-environmental analysis of hybrid system configurations consisting of conventional and emerging technologies utilizing natural gas, electric grid, and renewable power resources along with heat recovery systems and heat pump technologies are analyzed and presented. The key objective is to present integrated system configurations and thermodynamic analysis of various co-generation systems suitable for providing building energy. Design solutions targeting low carbon footprint and high energy efficiency are presented.

Cheekatamarla, Praveen↗
DOE OSTI2023

Thermodynamic re-modeling of the Yb-Sb system aided by first-principles calculations

Here, the thermodynamic description of the Yb-Sb binary system is developed by means of the CALculations of PHAse Diagrams (CALPHAD) method by combining experimental data in the literature and predictions from first-principles calculations based on density functional theory (DFT) in the literature and the present work. Two pseudopotentials of Yb are compared in the present DFT-based calculations with 14 and 13 f-electrons frozen in the core, i.e., 5p 6 6s 2 and 5p 6 6s 2 5 d 1 electrons as valence electrons, termed Yb_2 and Yb_3, respectively. It is shown that the phonon spectrum of the YbSb phase calculated using the Yb_3 pseudopotential does not have imaginary phonon modes and is subsequently used to predict its temperature dependent thermodynamic properties by the DFT-based quasiharmonic phonon calculations. The present thermodynamic database includes the Yb 16 Sb 11 phase in addition to five intermetallic phases that were considered in previous modeling studies, i.e., YbSb 2 , YbSb, Yb 11 Sb 10 , Yb 4 Sb 3 , and Yb 5 Sb 3 . The high temperature orthorhombic structure of the Yb 5 Sb 3 phase is not considered in the present work as it was stabilized by hydrogen. The associate solution model is used to describe the short-range ordering behavior in the liquid phase. The calculations from the present thermodynamic model show good agreement with thermochemical and phase equilibrium data from both the present work and the literature.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Nonequilibrium physics in biology

Life is characterized by a myriad of complex dynamic processes allowing organisms to grow, reproduce, and evolve. Physical approaches for describing systems out of thermodynamic equilibrium have been increasingly applied to living systems, which often exhibit phenomena not found in those traditionally studied in physics. Spectacular advances in experimentation during the last decade or two, for example, in microscopy, single-cell dynamics, in the reconstruction of subcellular and multicellular systems outside of living organisms, and in high throughput data acquisition, have yielded an unprecedented wealth of data on cell dynamics, genetic regulation, and organismal development. These data have motivated the development and refinement of concepts and tools to dissect the physical mechanisms underlying biological processes. Notably, landscape and flux theory as well as active hydrodynamic gel theory have proven useful in this endeavor. Together with concepts and tools developed in other areas of nonequilibrium physics, significant progress has been made in unraveling the principles underlying efficient energy transport in photosynthesis, cellular regulatory networks, cellular movements and organization, embryonic development and cancer, neural network dynamics, population dynamics and ecology, as well as aging, immune responses, and evolution. In this paper, recent advances in nonequilibrium physics are reviewd and their application to biological systems is surveyed. Many of these results are expected to be important cornerstones as the field continues to build our understanding of life.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Thermodynamically consistent Cahn–Hilliard–Navier–Stokes equations using the metriplectic dynamics formalism

Cahn–Hilliard–Navier–Stokes (CHNS) systems describe flows with two-phases, e.g., a liquid with bubbles. Obtaining constitutive relations for general dissipative processes for such systems, which are thermodynamically consistent, can be a challenge. We show how the metriplectic 4-bracket formalism (Morrison and Updike, 2024) achieves this in a straightforward, in fact algorithmic, manner. First, from the noncanonical Hamiltonian formulation for the ideal part of a CHNS system we obtain an appropriate Casimir to serve as the entropy in the metriplectic formalism that describes the dissipation (e.g. viscosity, heat conductivity and diffusion effects). General thermodynamics with the concentration variable and its thermodynamics conjugate, the chemical potential, are included. Having expressions for the Hamiltonian (energy), entropy, and Poisson bracket, we describe a procedure for obtaining a metriplectic 4-bracket that describes thermodynamically consistent dissipative effects. The 4-bracket formalism leads naturally to a general CHNS system that allows for anisotropic surface energy effects. Furthermore, this general CHNS system reduces to cases in the literature, to which we can compare.

Cahn–Hilliard↗
DOE OSTI2026

Uncertainty-Driven Rapid Thermodynamic Assessment of Nb-Ta-Zr System and Effects of C impurities (L25GF9298S): Annual Progress Report

An integrated computational materials engineering (ICME) method is in development for rapid thermodynamic experimental investigation and high-fidelity computational modeling of refractory multi-principal element alloys (RMPEAs). These ultra-high-temperature (UHT) alloys are of interest for structural applications in extreme environments, but deficiency of reliable data, especially melting temperatures, impedes the prediction of alloys with favorable properties. The method leverages UHT capabilities and computational expertise of LLNL’s Materials Science Division and the McCormack Lab’s UHT conical nozzle levitation (CNL) system to iteratively map the Nb-Ta-Zr phase space, with focus on the liquidus surface, through targeted experiments selected by quantifying uncertainty in the thermodynamic model fitting parameters. This method will reduce the time to map uncharted RMPEA phase space and thereby accelerate discovery and development of advanced materials for applications in extreme environments.

36 MATERIALS SCIENCE↗