Search NASA⌕ Search

SEARCH · Search NASA

Results for “Topographic effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Current trends and research challenges in land remote sensing

The use of space technology to conduct repetitive global surveys of terrestrial surface conditions is reviewed. The state-of-the-art is determined by the measurement capabilities of orbital sensor systems, the maneuvering and data transmission capabilities of orbital platforms, and the sophistication of the user community. Introduction of the Landsat Thematic Mapper and SPOT sensor systems and operational use of the Space Shuttle are discussed. Research challenges of the 1980's are related to the removal of atmospheric and topographic effects in remotely sensed imagery, the extraction of information from high dimensionality data sets, and the ability to conduct meaningful ground truth surveys to support the analysis and interpretation of remotely sensed data.

Settle, M.↗

Observations of Gulf Stream-induced and wind-driven upwelling in the Georgia Bight using ocean color and infrared imagery

Ocean color and infrared imagery from U2 aircraft and satellite sensors are used to study upwelling interaction between Gulf Stream and continental shelf waters in the Georgia Bight. The photographic data are combined with in situ measurements of currents, chlorophyll, temperature, salinity, coastal winds, and sea-level in observations of five different upwelling events including a near-short wind-driven upwelling caused by topographic effects, three filament-induced upwellings in the Gulf Stream, and a possible meander-induced upwelling event in the Gulf Stream. Chlorophyll distributions are used to trace the circulation and propagation of filaments along the advective routes by which the water moves offshore. Photographic and mooring array measurements of temperature time series are found to provide nearly identical results for the phase speeds of each event. Field measurements of surface pigments, and Nimbus/7 coastal zone color scanner (CZCS) estimates are found to agree well over the range of concentrations 0.1 to 0.7 mg/m to the third. Examples of U2/Ocean Color Scanner and Nimbus 7 CZCS photographs are provided.

Mcclain, C. R.↗

Studies of coastal mesoscale winds using SIR-B

The variability of the mesoscale wind fields near coastlines which can be caused by mountains that shadow offshore wind and by valleys that enhance them. These wind, provide relatively fixed patterns that must be considered in the development of algorithms for future spaceborne scatterometer systems; mesoscale variability over the offshore regions is random and must be averaged out for forecasting yet nearshore fixed patterns are treated differently. Before the patterns of interest can be defined quantitatively, the scattering response of the ocean to winds at the L-band frequency and SIR-B angles of incidence must be developed from the SIR-B data. Patterns can be analyzed on the images both in regions selected for high probability of the occurrence of suitable patterns, and in other regions where the patterns are observed. The patterns are analyzed for topographic effects and the distance to sea over which these effects cause variations in the oceanic wind patterns. The results are interpreted in terms of quantitative description of the processes involved and in for need of modifications of future scatterometer algorithms.

Moore, R. K.↗

The use of multisensor images for Earth Science applications

The use of more than one remote sensing technique is particularly important for Earth Science applications because of the compositional and textural information derivable from the images. The ability to simultaneously analyze images acquired by different sensors requires coregistration of the multisensor image data sets. In order to insure pixel to pixel registration in areas of high relief, images must be rectified to eliminate topographic distortions. Coregistered images can be analyzed using a variety of multidimensional techniques and the acquired knowledge of topographic effects in the images can be used in photogeologic interpretations.

Evans, D.↗

Accuracy of geologic maps produced from Landsat data

Remote sensing techniques are now being applied to space-acquired data for use in preparing geologic maps, at least at the reconnaissance level, when maps produced from Landsat multispectral scanner data are compared with those made by conventional ground/aerial techniques, accuracies of the Landsat maps fall in the 40-60 percent range relative to their conventional counterparts. A study of map accuracy achieved with Landsat-4 Thematic Mapper (TM) data indicates a 10-15 percent improvement in this range. Results from TM scenes for Death Valley, California and the Waterpocket Fold, Utah are evaluated in this paper. While accuracy values should improve even more when corrections for topographic effects are made, there appears to be an upper limit to accuracy (not yet determined), owing to a fundamental difference between geologic maps (which show stratigraphic unit distribution below the regolith) and Landsat-derived rock units maps (which identify rock and regolith types at the surface). However, preliminary results from the Utah study indicate a marked improvement and accuracy to better than 80 percent when high spatial resolution TM-equivalent data from an aircraft mission are used.

Short, N. M.↗

Multipolarization radar images for geologic mapping and vegetation discrimination

NASA has developed an airborne SAR that simultaneously yields image data in four linear polarizations in L-band with 10-m resolution over a swath of about 10 km. Signal data are recorded both optically and digitally and annotated in each of the channels to facilitate completely automated digital correlation. Comparison of the relative intensities of the different polarizations furnishes discriminatory mapping information. Local intensity variations in like-polarization images result from topographic effects, while strong cross polarization responses denote the effects of vegetation cover and, in some cases, possible scattering from the subsurface. In each of the areas studied, multiple polarization data led to the discrimination and mapping of unique surface unit features.

Evans, D. L.↗

The regression intersection method of adjusting image data for band ratioing

Estimation of the combined path radiance and sensor offset terms is essential in adjusting multispectral image radiance measurements for band ratioing. Commonly applied techniques for making this estimate have required assumptions or ancillary information regarding the reflectance properties of surface materials. This paper presents a technique that is unique in that it provides absolute (not just relative) statistically-derived estimates without the use of ancillary information. It is termed the regression intersection method (RIM). RIM is based on contrasts between the spectral properties of various homogeneous areas in rugged terrain. These areas are selected by examination of the image data alone. Bispectral regression (first principal component) lines are determined for each area and are projected, in pairs, to intersection points. Ideally, the coordinates of these points must equal the measurements for zero ground radiance since that is the only condition under which spectrally different materials can have the same radiance values. The median result from several site-pair and band-pair comparisons is used in order to statistically mitigate noise and minor variations due to natural variability. Tests show that the method is successful in determining correction values for the image data that result in maximum removal of the topographic effect in ratio images.

Crippen, Robert E.↗

Land-surface temperature measurement from space - Physical principles and inverse modeling

To apply the multiple-wavelength (split-window) method used for satellite measurement of sea-surface temperature from thermal-infrared data to land-surface temperatures, the authors statistically analyze simulations using an atmospheric radiative transfer model. The range of atmospheric conditions and surface temperatures simulated is wide enough to cover variations in clear atmospheric properties and surface temperatures, both of which are larger over land than over sea. Surface elevation is also included in the simulation as the most important topographic effect. Land covers characterized by measured or modeled spectral emissivities include snow, clay, sands, and tree leaf samples. The empirical inverse model can estimate the surface temperature with a standard deviation less than 0.3 K and a maximum error less than 1 K, for viewing angles up to 40 degrees from nadir under cloud-free conditions, given satellite measurements in three infrared channels. A band in the region from 10.2 to 11.0 microns will usually give the most reliable single-band estimate of surface temperature. In addition, a band in either the 3.5-4.0-micron region or in the 11.5-12.6-micron region must be included for accurate atmospheric correction, and a band below the ozone absorption feature at 9.6 microns (e.g., 8.2-8.8 microns) will increase the accuracy of the estimate of surface temperature.

Wan, Zhengming↗

Snow and glacier mapping with polarimetric SAR

The objective of this study was to examine the capability of mapping snow and glaciers in alpine regions using synthetic aperture radar (SAR) imagery when topographic information is not available. The topographic effects on the received power for a resolution cell can be explained by the change in illumination area and incidence angle in a slant-rante representation of SAR imagery. The specific polarization signatures and phase difference between HH and VV components are relatively independent of the illuminated are, and the incidence angle has only a small effect on these parameters. They provide a suitable measurement data set for snow and glacier mapping in a high-relief area. The results show that the C-band images of the enhancement factor, the phase difference between HH and VV scattering components, and the normalized cross product of VV scattering elements provide the capability to discriminate among snow with different wetnesses, glaciers, and rocky regions.

Shi, Jiancheng↗

Numerical Model Studies of the Martian Mesoscale Circulations

Studies concerning mesoscale topographical effects on Martian flows examined low-level jets in the near equatorial latitudes and the dynamical intensification of flow by steep terrain. Continuation of work from previous years included evaluating the dissipation of cold air mass outbreaks due to enhanced sensible heat flux, further sensitivity and scaling evaluations for generalization of the characteristics of Martian mesoscale circulation caused by horizontal sensible heat-flux gradients, and evaluations of the significance that non-uniform surface would have on enhancing the polar CO2 ice sublimation during the spring. The sensitivity of maximum and minimum atmospheric temperatures to changes in wind speed, surface albedo, and deep soil temperature was investigated.

Segal, M.↗

Characteristics of Forests in Western Sayani Mountains, Siberia from SAR Data

This paper investigated the possibility of using spaceborne radar data to map forest types and logging in the mountainous Western Sayani area in Siberia. L and C band HH, HV, and VV polarized images from the Shuttle Imaging Radar-C instrument were used in the study. Techniques to reduce topographic effects in the radar images were investigated. These included radiometric correction using illumination angle inferred from a digital elevation model, and reducing apparent effects of topography through band ratios. Forest classification was performed after terrain correction utilizing typical supervised techniques and principal component analyses. An ancillary data set of local elevations was also used to improve the forest classification. Map accuracy for each technique was estimated for training sites based on Russian forestry maps, satellite imagery and field measurements. The results indicate that it is necessary to correct for topography when attempting to classify forests in mountainous terrain. Radiometric correction based on a DEM (Digital Elevation Model) improved classification results but required reducing the SAR (Synthetic Aperture Radar) resolution to match the DEM. Using ratios of SAR channels that include cross-polarization improved classification and

Ranson, K. Jon↗

Estimation of Canopy Water Content in Konza Parry Grasslands Using Synthetic Aperture Radar Measurements During FIFE

This paper presents the development of an algorithm to retrieve the canopy water contents of natural grasslands and pasture from synthetic aperture radar (SAR) measurements. The development on this algorithm involves three interrelated steps: (1) calibration of SAR data for ground topographic variations, (2) development and validation of backscatter model for cross-polarized ratio. The polarimetric radar data acquired by the Jet Propulsion Laboratory AIRSAR system during the 1989 First International Satellite land Surface Climatology Project (ISLSCP) Field Experiment (FIFE) used for this study. The SAR data have been calibrated and corrected for the topographical effects by using the digital elevation map of the study area.

canopy water contents algorithm Konza Konza Parry ↗

Topographically Induced Thermal Effects on Lunar Hydrogen Distributions: Correlated Observations from the LRO LEND and LOLA Instruments

The question of whether water exists on the Moon's surface has long been an enigma to Lunar researchers. Largely, this was due to the thermally extreme lunar surface environment that would seem to preclude any long term maintenance, manufacture, transport or accumulation of hydrogen (H) volatiles over most of the lunar surface. As a result, for many years the cold permanent shadow regions (PSR) in the bottoms of craters near the lunar poles appeared to provide the basic conditions at least for maintenance of lunar hydrogen. Importantly, recent discoveries indicate that there is some hydrogen at the poles. However, the picture of the lunar hydrogen budget may be more complex than the PSR hypothesis has suggested. This evidence comes from observations by the Lunar Exploration Neutron Detector (LEND) onboard the Lunar Reconnaissance Orbiter (LRO) that inclici1te 1) some H concentrations lie outside PSR and 2) though a few of the larger PSR's have high hydrogen, PSR does not appear to be an independent factor influencing the large-scale suppression of polar epithermals observed by LEND and the Lunar Prospector Neutron Spectrometer. In this research we investigate the possibility that the thermal contrast between pole-facing and equator facing-slopes is a factor influencing the surface distributions of lunar H. We perform this bulk correlated observation and study by developing a thermal proxy from slope data of the Lunar Orbiting Laser Altimeter (LOLA) digital elevation model (DEM) which is registered with the collimated LEND epithermal map. From the LOLA transforms we impose a thermal functional decomposition and systematic statistical analysis of the LEND epithermal map. Our hypothesis testing suggests in most high latitude bands studied> +/- 45 deg: Epithermal rates in pole-facing slopes are significantly lower than epithermal rates in equivalent equator-facing slopes. As a control study, we find that there is no statistically significant difference between equivalent east and west facing slopes. This finding suggests topographic modulation of insolation is a factor influencing the lunar H budget. Importantly, this result is consistent with observations in terrestrial, Martian research.

McClanahan, T. P.↗

The Effects of Temporal and Topographic Decorrelation on Forest Height Retrieval Using Airborne Repeat-Pass L-Band Polarimetric SAR Interferometry

We have explored the effects of temporal baseline and terrain slope on forest height estimation using L-band repeat-pass polarimetric-interferometric synthetic aperture radar (PolIn-SAR). Data were collected using NASA’s Uninhabited Aerial Vehicle Synthetic Aperture Radar instrument over a study area exhibiting high slope topography in the Laurentides Wildlife Reserve of Quebec, Canada. We used lidar-derived canopy height and terrain slope maps to quantify the decorrelation effects, in both magnitude and phase, that distort the observed coherences compared to the random volume over ground forest model. We derived forest height maps for a number of different temporal baselines using both fixed model parameters and model parameters that varied with slope, and compared the results. Further work is necessary to develop improved slope correction methods, and to see if slope corrections derived from lidar data for this study area can be applied to other study areas, or generalized to a theoretical model.

polarimetric SAR interferometry↗

Anticipated Electrical Environment Within Permanently Shadowed Lunar Craters

Shadowed locations ncar the lunar poles arc almost certainly electrically complex regions. At these locations near the terminator, the local solar wind flows nearly tangential to the surface and interacts with large-scale topographic features such as mountains and deep large craters, In this work, we study the solar wind orographic effects from topographic obstructions along a rough lunar surface, On the leeward side of large obstructions, plasma voids are formed in the solar wind because of the absorption of plasma on the upstream surface of these obstacles, Solar wind plasma expands into such voids) producing an ambipolar potential that diverts ion flow into the void region. A surface potential is established on these leeward surfaces in order to balance the currents from the expansion-limited electron and ion populations, Wc find that there arc regions ncar the leeward wall of the craters and leeward mountain faces where solar wind ions cannot access the surface, leaving an electron-rich plasma previously identified as an "electron cloud." In this case, some new current is required to complete the closure for current balance at the surface, and we propose herein that lofted negatively charged dust is one possible (nonunique) compensating current source. Given models for both ambipolar and surface plasma processes, we consider the electrical environment around the large topographic features of the south pole (including Shoemaker crater and the highly varied terrain near Nobile crater), as derived from Goldstone radar data, We also apply our model to moving and stationary objects of differing compositions located on the surface and consider the impact of the deflected ion flow on possible hydrogen resources within the craters

Farrell, W. M.↗