Search NASA⌕ Search

SEARCH · Search NASA

Results for “Torque Limiter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Annual Performance of the Second-Generation Variable-Geometry Oscillating Surge Wave Energy Converter

Recent studies in wave energy have highlighted the need for a structured innovation approach in wave energy converter (WEC) design because cost-of-energy estimates have remained high. One specific innovation being investigated by the National Renewable Energy Laboratory is WEC geometry control, which uses control surfaces in combination with an oscillating surge WEC (OSWEC) to increase device availability and power generation while limiting structural costs. This study performs the first analysis of annual performance for a novel OSWEC with geometry control to understand how the geometry control affects availability, annual power generation, and structural loadings like the power-take-off (PTO) torque or surge foundation force. Device hydrodynamic coefficients are calculated using linear potential theory for six geometry configurations. A nonideal PTO system is assumed and quadratic viscous damping losses are considered. Annual performance is evaluated and compared for three U.S. wave energy sites. The WEC geometry and PTO system are controlled on a sea-state basis to optimize for power capture while remaining under limits set on motion amplitude and structural loads. Results indicate that geometry control can increase availability up to 25 days in an average year depending on design limits, increase average power generation, and significantly reduce peak structural loads.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2024

Emerging magnetic materials for electric vehicle drive motors

Abstract Increasing demand for electric vehicles (EVs) is increasing demand for the permanent magnets that drive their motors, as approximately 80% of modern EV drivetrains rely on high-performance permanent magnets to convert electricity into torque. In turn, these high-performance permanent magnets rely on rare earth elements for their magnetic properties. These elements are “critical” (i.e., at risk of limiting the growth of renewable energy technologies such as EVs), which motivates an exploration for alternative materials. In this article, we overview the relevant fundamentals of permanent magnets, describe commercialized and emerging materials, and add perspective on future areas of research. Currently, the leading magnetic material for EV motors is Nd 2 Fe 14 B, with samarium-cobalt compounds (SmCo 5 and Sm 2 Co 17 ) providing the only high-performing commercialized alternative. Emerging materials that address criticality concerns include Sm 2 Fe 17 N 3 , Fe 16 N 2 , and the L1 0 structure of FeNi, which use lower cost elements that produce similar magnetic properties. However, these temperature-sensitive materials are incompatible with current metallurgical processing techniques. We provide perspective on how advances in low-temperature synthesis and processing science could unlock new classes of high-performing magnetic materials for a paradigm shift beyond rare earth-based magnets. In doing so, we explore the question: What magnetic materials will drive future EVs? Graphical abstract

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

Emerging magnetic materials for electric vehicle drive motors [Slides]

Increasing demand for electric vehicles (EVs) is increasing demand for the permanent magnets that drive their motors, as approximately 80% of modern EV drivetrains rely on high-performance permanent magnets to convert electricity into torque. In turn, these high-performance permanent magnets rely on rare earth elements for their magnetic properties. These elements are "critical" (i.e., at risk of limiting the growth of renewable energy technologies such as EVs), which motivates an exploration for alternative materials. In this article, we overview the relevant fundamentals of permanent magnets, describe commercialized and emerging materials, and add perspective on future areas of research. Currently, the leading magnetic material for EV motors is Nd 2 Fe 14 B, with samarium-cobalt compounds (SmCo 5 and Sm 2 Co 17 ) providing the only high-performing commercialized alternative. Emerging materials that address criticality concerns include Sm 2 Fe 17 N 3 , Fe 16 N 2 , and the L10 structure of FeNi, which use lower cost elements that produce similar magnetic properties. However, these temperature-sensitive materials are incompatible with current metallurgical processing techniques. We provide perspective on how advances in low-temperature synthesis and processing science could unlock new classes of high-performing magnetic materials for a paradigm shift beyond rare earth-based magnets. In doing so, we explore the question: What magnetic materials will drive future EVs?

42 ENGINEERING↗
DOE OSTI2021

Survival of itinerant excitations and quantum spin state transitions in YbMgGaO 4 with chemical disorder

A recent focus of quantum spin liquid (QSL) studies is how disorder/randomness in a QSL candidate affects its true magnetic ground state. The ultimate question is whether the QSL survives disorder or the disorder leads to a “spin-liquid-like” state, such as the proposed random-singlet (RS) state. Since disorder is a standard feature of most QSL candidates, this question represents a major challenge for QSL candidates. YbMgGaO 4 , a triangular lattice antiferromagnet with effective spin-1/2 Yb 3+ ions, is an ideal system to address this question, since it shows no long-range magnetic ordering with Mg/Ga site disorder. Despite the intensive study, it remains unresolved as to whether YbMgGaO 4 is a QSL or in the RS state. Here, through ultralow-temperature thermal conductivity and magnetic torque measurements, plus specific heat and DC magnetization data, we observed a residual κ 0 /T term and series of quantum spin state transitions in the zero temperature limit for YbMgGaO 4 . These observations strongly suggest that a QSL state with itinerant excitations and quantum spin fluctuations survives disorder in YbMgGaO 4 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Probing Ice-Rule-Breaking Transition in Dy 2 Ti 2 O 7 Thin Film by Proximitized Transport and Magnetic Torque

While the spin-ice state of bulk pyrochlores such as Dy 2⁢ Ti 2 ⁢O 7 and Ho 2⁢ Ti 2 ⁢O 7 has been extensively studied in the past several decades due to its unique degenerate ground state and emergent monopole excitation, whether it survives in the thin-film form remains a mystery. The limited volume of the thin-film sample makes it challenging to study the intrinsic magnetic properties. Here, we synthesized 18-nm-thick Dy 2⁢ Ti 2 ⁢O 7 thin film on yttria-stabilized zirconia with 9.5 mol% Y 2 ⁢O 3 substrate and capped it by a thin conductive Bi 2 ⁢Ir 2 ⁢O 7 layer and performed the proximitized magnetoresistance measurements. Our Letter found that the ice-rule-breaking phase transition survives but with a modified effective nearest-neighbor interaction (𝐽 eff =1.054 K) and distorted Ising spin axes (𝜀 = +0.051) compared to the bulk crystal. Furthermore, the results are supported by the simultaneously measured capacitive torque magnetometry. Our Letter demonstrates that proximitized transport is an effective tool for thin films of insulating frustrated magnets.

Magnetic interactions↗
DOE OSTI2020

Spin-orbit-proximitized ferromagnetic metal by monolayer transition metal dichalcogenide: Atlas of spectral functions, spin textures, and spin-orbit torques in Co/MoSe 2 , Co/WSe 2 and Co/TaSe 2 heterostructures

In this work, the heterostructures composed of an ultrathin ferromagnetic metal (FM) and a material hosting strong spin-orbit (SO) coupling are the principal resource for SO torque and spin-to-charge conversion nonequilibrium effects in spintronics. The key quantity in theoretical description of these effects is nonequilibrium spin density, which can appear on any monolayer of the heterostructure through which the current is flowing as long as the monolayer bands are affected by the native or proximity induced SO coupling. Here we demonstrate how hybridization of wave functions of Co layer and a monolayer of transition metal dichalcogenides (TMDs)—such as semiconducting MoSe 2 and WSe 2 or metallic TaSe 2 —can lead to dramatic transmutation of electronic and spin structure of Co within some distance away from its interface with TMD, when compared to the bulk of Co or its surface in contact with a vacuum. This is due to proximity induced SO splitting of Co bands encoded in the spectral functions and spin textures on its monolayers, which we obtain using noncollinear density functional theory (ncDFT) combined with equilibrium Green function (GF) calculations. In fact, SO splitting is present due to structural inversion asymmetry of the bilayer—i.e., just the presence of the interface—even if SO coupling within TMD monolayer is artificially switched off in ncDFT calculations. However, switching it on makes the effects associated with proximity SO coupling within Co layer about five times larger. Injecting spin-unpolarized charge current through SO-proximitized monolayers of Co generates nonequilibrium spin density over them, so that its cross product with the magnetization of Co determines SO torque. The SO torque computed via first-principles quantum transport methodology, which combines ncDFT with nonequilibrium GF calculations, can be used as the screening parameter to identify optimal combination of materials and their interfaces for applications in spintronics. In particular, we identify heterostructure two-monolayer-Co/monolayer-WSe 2 as the most optimal one, at least in the clean limit.

2-dimensional systems↗
DOE OSTI2023

Hydrodynamic spin-orbit coupling in asynchronous optically driven micro-rotors

Abstract Vortical flows of rotating particles describe interactions ranging from molecular machines to atmospheric dynamics. Yet to date, direct observation of the hydrodynamic coupling between artificial micro-rotors has been restricted by the details of the chosen drive, either through synchronization (using external magnetic fields) or confinement (using optical tweezers). Here we present a new active system that illuminates the interplay of rotation and translation in free rotors. We develop a non-tweezing circularly polarized beam that simultaneously rotates hundreds of silica-coated birefringent colloids. The particles rotate asynchronously in the optical torque field while freely diffusing in the plane. We observe that neighboring particles orbit each other with an angular velocity that depends on their spins. We derive an analytical model in the Stokes limit for pairs of spheres that quantitatively explains the observed dynamics. We then find that the geometrical nature of the low Reynolds fluid flow results in a universal hydrodynamic spin-orbit coupling. Our findings are of significance for the understanding and development of far-from-equilibrium materials.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Experimental Validation of a Modular All-Electric Power Take-Off Topology for Wave Energy Converter Enabling Marine Renewable Energy Interconnection

Power electronic converters are an enabling technology for the emerging marine energy applications, such as using ocean waves to produce electricity. This paper outlines the power take-off system and its key components used in a wave energy converter offering modularity and scalability to generate power efficiently. The proposed power take-off system was implemented based on a modular multilevel converter and could be deployed to convert any alternating current electrical energy to a different alternating current for interconnection to grid or non-grid applications. Examples of widespread deployment are supplying electricity to coastal communities or producing clean drinking water. The analysis using both the simulation tests and laboratory experiments verified the design objectives and basic functionality of the developed power take-off system. An acceptable response using a field programmable gate array-based controlled laboratory testbench was achieved, complying with guidelines specified in the prevalent industry standards. Seamless operation during steady-state and transients for the studied wave energy converter was achieved as supported by the obtained results. The key findings of this work were experimentally examined under different load conditions, direct current bus voltage fluctuations, and generator speed–torque regulation. The ability of the power take-off system to generate high-power quality of the waveforms, e.g., against adhering to the IEEE 519-2022 standard for total harmonic distortion limits, is also confirmed.

Engineering↗
DOE OSTI2025

Thermal and electric multidomain dynamic model for integration of power grid distribution with behind-the-meter devices

As renewable energy sources like solar and wind power become more integrated into the grid, coordinated control of behind-the-meter devices is crucial for enhancing grid flexibility and reliability and for meeting cost targets, with standardized models being developed to support this transition. The increasing flexibility and uncertainty of integrated renewable energy grids, along with interactions between various subsystems, make traditional steady-state modeling insufficient to capture transient and dynamic behaviors. Current models (e.g., composite load and battery equivalent models) focus on thermodynamic or electrical characteristics but overlook critical electromechanical interactions. This limits the ability to share performance information for grid services and hampers fast dynamic simulations. In addition, motor stalling is usually triggered by a fault event and attributed to the characteristics of the mechanical torque of the motor, resulting in absorption of a large amount of reactive power during the stalling period. Further, this significant withdrawal of reactive power will deteriorate the dynamic voltage stability of power grids and cause delayed voltage recovery. Therefore, an in-depth modeling of the thermodynamics or mechanical torque is essential to study the impacts of the realistic torque characteristics of those behind-the-meter devices on power system voltage stability. This study developed a dynamic multidomain model for building HVAC systems, such as air-source heat pumps, to simulate their thermal and electrical responses to grid transients. The model can accurately predict power metrics with a mean absolute percentage error of 10%, by validating against with power system computer-aided design performance data. Case studies demonstrate the model capability of capturing the transient response to sudden voltage changes, rapid load fluctuations, and system shutdowns respectively. During a sudden voltage drop (30% for 0.1s), a fully loaded heat pump’s motor speed dropped, continued declining, and shut down after 3.6s, with severe power oscillations and a torque spike. A partially loaded unit experienced temporary oscillations but stabilized. Under higher building loads, compressor speed increased from 64% to 100%, with power and torque rising before stabilizing. In safety-triggered shutdowns, power decreased after minor fluctuations, and torque briefly spiked before dropping to zero.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Cryogenic aspects of a 20 MW class low-temperature superconducting generator for the renewables industry

In this paper we give a progress update on the cryogenic design for cooling a 20 MW class, partially superconducting generator with stationary field coils for offshore wind renewables industry [1-2]. This is a continuation of an earlier program on a 10 MW system dating back ten years. Whereas this new power rating increase leads to a radial diameter expansion of the superconducting field coils from 4 to > 9.5 m, it maintains the axial length. We show the design based on this scaled up with enlarged diameter. The field coil size increase asks for higher cooling power that leads to a bigger cold box size to accommodate the cryocoolers. In the design, as many as 8 cryocoolers can be accessed and serviced from the nacelle that houses the main cryogenic components. A typical thermal load balance sheet with all components is given and compared against the available cryocooler cooling power at different operating conditions. Due to the cryocoolers’ local point of contact cooling within the nacelle, the temperature gradient of the thermal shield that fully encloses the cold mass with its embedded field coils needs to be balanced out to minimize the heat burden on the field coils. This requires additional analytical efforts and implementation of further design features. The extended nacelle houses the cold box with its cryogenic infrastructure. The interface for the envisaged cryogenic pushbutton closed-loop circulating system remains invisible, requires no handling of cryogenic liquids and is hermetically closed. The field coil diameter increase also leads to a greater initial helium gas storage volume. In addition, it requires higher initial room temperature fill pressure within the toroidal helium vapor storage tanks and in cooling tubes connecting to the cryocoolers. The toroidal helium gas tanks are thermally coupled with the thermal shield so that helium convection inside the storage tank can improve heat transfer and reduce the temperature gradient of the thermal shield. Besides those heat transfer challenges, additional mechanical strain within this large structure is exerted on the torque tubes during initial cooldown and when energizing field coils. Some of those design challenges are quite unexpected, leading to novel workarounds in order to maintain the chosen cooling strategy. Finally, we assess those design limitations in view of further cryogenic scalability with emphasis on manufacturability and assembly.

cryogenics↗
DOE OSTI2024

Investigating the influence of particle distribution on force and torque statistics using hierarchical machine learning

An accurate representation of hydrodynamic force and torque experienced by every particle in a distribution can be obtained from particle resolved (PR) simulations. These unique quantities are influenced by the deterministic position of surrounding particles. However, systems simulated with this methodology are typically limited to particles due to the involved computational cost. This resource requirement is a major bottleneck in analyzing the effect of variations in particle distribution. Here, this article attempts to address this bottleneck by availing relatively inexpensive deep learning models. The surrogate models that we employ in this article use a physics‐based hierarchical framework and symmetry‐preserving neural networks to achieve robustness with limited training data. This article first performs additional generalizability tests on PR data of distinct distributions that are not involved in the training process. The models are then deployed on several different particle distributions. Impact of clustering and structure on the observed statistics are investigated.

42 ENGINEERING↗
DOE OSTI2020

Analytical model for quasi-linear flow response to resonant magnetic perturbation in resistive-inertial and viscous-resistive regimes

In this work, a quasi-linear model for plasma flow response to the resonant magnetic perturbation (RMP) in a tokamak has been rigorously developed in the resistive-inertial (RI) and viscousresistive (VR) regimes purely from the two-field reduced MHD model. Models for plasma response to RMP are commonly composed of equations for the resonant magnetic field response (i.e. the magnetic island) and the torque balance of plasma flow. However, in previous plasma response models, the magnetic island and the torque balance equations are often derived separately from reduced MHD and full MHD equations, respectively. By contrast, in this work we derive both the magnetic island response and the torque balance equations in a quasi-linear model for plasma flow response entirely from a set of two-field reduced MHD equations. Such a quasi-linear model can recover previous plasma flow response models within certain limits and approximations. Furthermore, the physical origins of quasi-linear forces and moments in the flow response equation are also accurately calculated and clarified self-consistently.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Magnetosphere Evolution and Precursor-driven Electromagnetic Signals in Merging Binary Neutron Stars

We detail new force-free simulations to investigate magnetosphere evolution and precursor electromagnetic (EM) signals from binary neutron stars. Our simulations fully follow a representative inspiral motion, capturing the intricate magnetospheric dynamics and their impact on EM outflows. We explore a range of stellar magnetic moment orientations and relative strengths, finding that the magnetospheres and Poynting flux evolution are strongly configuration dependent. The Poynting flux exhibits pulsations at twice the orbital frequency, 2Ω, and is highly anisotropic, following a power-law dependence on orbital frequency. The index ranges from 1 to 6, shaped by the intricate dynamics of the magnetospheres. Furthermore, we present the first computation of (1) the EM forces acting on the star surfaces, revealing the presence of torques that, for highly magnetized stars, could influence the orbital dynamics or break the crust; (2) the high-energy emission signals from these systems by adopting the established isolated pulsar theory. Assuming curvature radiation in the radiation-reaction limit, we find that photons could reach TeV–PeV energies in the last ∼ms for magnetic field strengths 10 10 –10 15 G. However, our analysis of single photon magnetic pair production suggests that these photons are unlikely to escape, with the MeV band emerging as a promising observational window for precursor high-energy emission. In this framework, we construct high-energy emission skymaps and light curves, exploring observational implications. Finally, we propose potential precursor radio emission and delayed afterglow echoes from magnetized outflows, which may contribute to late-time rebrightening in short gamma-ray bursts or to orphan afterglows.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Comparative Analysis of Direct and Indirect Cooling of Wide-Bandgap Power Modules and Performance Enhancement of Jet Impingement-Based Direct Substrate Cooling

With the development of high-power and high-torque machines, requirements for high-power density electronics are increasing. Thermal management of such systems requires high heat extraction. Conventional air cooling based heat sinks and cold plate based liquid cooling have their own benefits for various applications but has limitations for high power density applications. The current study explores a jet impingement based direct substrate cooling system that was implemented for a SiC based direct bonded Cu substrate for various power losses. Numerical comparison between jet impingement cooling and conventional horizontal/indirect cooling (pin fin heat sink and genetic algorithm-optimized heat sink) showed that the area weighted average of the heat transfer coefficient (HTC) is high for both horizontal cooling designs, and the local HTC is higher for jet impingement. Design iterations were undertaken to resolve the bottleneck of this cooling system. Increasing the number of nozzles helped to cover more area at the direct bonded Cu bottom plate, which drops the chip temperature considerably. With a constant flow rate, increasing the number of nozzles would decrease local jet velocity, which reduces the heat extraction by jet impingement. This issue can be addressed by reducing the diameter of nozzle but doing so results in a high pressure drop where the design constraint is 2 psi. A flared nozzle design is proposed, which has a higher spreading angle of the jet that increases the flow coverage and reduces the pressure drop of the coolant loop.

Barua, Himel↗
DOE OSTI2026

Brushless Excitation for Wound-field Synchronous Machines using Multi-harmonic Windings

Wound-field synchronous machines (WFSM) are promising alternatives to electric machines with permanent magnets (PM). The ability to control the rotor field in these machines makes them well-suited to safety critical applications, while the absence of rare-earth permanent magnets makes these machines sustainable. The WFSM rotor excitation schemes have traditionally used carbon brushes, which significantly reduces the reliability of these machines, limiting their widespread adoption. To overcome this limitation and improve the reliability of WFSMs, several brushless rotor excitation schemes have been developed. However, most of these systems require additional windings or dedicated power electronics, making them expensive and limiting achievable power-density. In this paper a new brushless excitation scheme is proposed. In this scheme, a multiphase, multi-harmonic stator winding is designed. This winding can independently control two spatial harmonics in the airgap of the machine; the first to create torque and the second to wirelessly transfer power to the rotor to excite it.

Gadiyar, Nishanth [ORNL] (ORCID:0000000348267524)↗
DOE OSTI2024

Overview of ASDEX upgrade results in view of ITER and DEMO

Experiments on ASDEX Upgrade (AUG) in 2021 and 2022 have addressed a number of critical issues for ITER and EU DEMO. A major objective of the AUG programme is to shed light on the underlying physics of confinement, stability, and plasma exhaust in order to allow reliable extrapolation of results obtained on present day machines to these reactor-grade devices. Concerning pedestal physics, the mitigation of edge localised modes (ELMs) using resonant magnetic perturbations (RMPs) was found to be consistent with a reduction of the linear peeling-ballooning stability threshold due to the helical deformation of the plasma. Conversely, ELM suppression by RMPs is ascribed to an increased pedestal transport that keeps the plasma away from this boundary. Candidates for this increased transport are locally enhanced turbulence and a locked magnetic island in the pedestal. The enhanced D-alpha (EDA) and quasi-continuous exhaust (QCE) regimes have been established as promising ELM-free scenarios. Here, the pressure gradient at the foot of the H-mode pedestal is reduced by a quasi-coherent mode, consistent with violation of the high-n ballooning mode stability limit there. This is suggestive that the EDA and QCE regimes have a common underlying physics origin. In the area of transport physics, full radius models for both L- and H-modes have been developed. These models predict energy confinement in AUG better than the commonly used global scaling laws, representing a large step towards the goal of predictive capability. A new momentum transport analysis framework has been developed that provides access to the intrinsic torque in the plasma core. In the field of exhaust, the X-Point Radiator (XPR), a cold and dense plasma region on closed flux surfaces close to the X-point, was described by an analytical model that provides an understanding of its formation as well as its stability, i.e., the conditions under which it transitions into a deleterious MARFE with the potential to result in a disruptive termination. With the XPR close to the divertor target, a new detached divertor concept, the compact radiative divertor, was developed. Here, the exhaust power is radiated before reaching the target, allowing close proximity of the X-point to the target. No limitations by the shallow field line angle due to the large flux expansion were observed, and sufficient compression of neutral density was demonstrated. With respect to the pumping of non-recycling impurities, the divertor enrichment was found to mainly depend on the ionisation energy of the impurity under consideration. In the area of MHD physics, analysis of the hot plasma core motion in sawtooth crashes showed good agreement with nonlinear 2-fluid simulations. This indicates that the fast reconnection observed in these events is adequately described including the pressure gradient and the electron inertia in the parallel Ohm’s law. Concerning disruption physics, a shattered pellet injection system was installed in collaboration with the ITER International Organisation. Thanks to the ability to vary the shard size distribution independently of the injection velocity, as well as its impurity admixture, it was possible to tailor the current quench rate, which is an important requirement for future large devices such as ITER. Progress was also made modelling the force reduction of VDEs induced by massive gas injection on AUG. The H-mode density limit was characterised in terms of safe operational space with a newly developed active feedback control method that allowed the stability boundary to be probed several times within a single discharge without inducing a disruptive termination. Regarding integrated operation scenarios, the role of density peaking in the confinement of the ITER baseline scenario (high plasma current) was clarified. The usual energy confinement scaling ITER98(p,y) does not capture this effect, but the more recent H20 scaling does, highlighting again the importance of developing adequate physics based models. Advanced tokamak scenarios, aiming at large non-inductive current fraction due to non-standard profiles of the safety factor in combination with high normalised plasma pressure were studied with a focus on their access conditions. A method to guide the approach of the targeted safety factor profiles was developed, and the conditions for achieving good confinement were clarified. Based on this, two types of advanced scenarios (‘hybrid’ and ‘elevated’

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Magnetic droplet solitons

Magnetic droplet solitons are dynamical magnetic textures that form due to an attractive interaction between spin waves in thin films with perpendicular magnetic anisotropy. Spin currents and the spin torques associated with these currents enable their formation as they provide a means to excite non-equilibrium spin-wave populations and compensate their decay. Recent years have seen rapid advances in experiments that realize and study magnetic droplets. Important advances include the first direct x-ray images of droplets, determination of their threshold and sustaining currents, measurement of their generation and annihilation time, and evidence for drift instabilities, which can limit their lifetime. This perspective discusses these studies and contrasts these solitons to other types of spin-current excitations, such as spin-wave bullets, and static magnetic textures, including magnetic vortices and skyrmions. Magnetic droplet solitons can also serve as current controlled microwave frequency oscillators with potential applications in neuromorphic chips as nonlinear oscillators with memory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Development of advanced combustion strategies for direct injection heavy duty LPG engines to achieve near-diesel engine efficiency

The Vehicle Technologies Office funds early-stage, high-risk research to develop technology upon which industry can implement innovative transportation energy technologies that increase efficiency, decrease cost, and expand use of domestic energy sources, such as liquefied petroleum gas (LPG). To improve the viability of medium and heavy-duty vehicles the LPG engine efficiency must be closer to that of diesel. This work addresses fundamental limitations to achieve diesel-like efficiencies in heavy duty on-road LPG engines. The primary goal of this research is to achieve diesel-like efficiencies in heavy duty on-road LPG engines, focusing on the Cummins 15-liter engine platform (baseline diesel efficiency of 44% at peak torque). That goal has been achieved, though more work is needed to facilitate practical implementation of the developed technologies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗