SEARCH · Search NASA
Results for “Torsion”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Torsional Resonator System for the Simultaneous Measurement of Density and Viscosity at High Temperature Final Phase I Technical Report
Explore the source record for details and available documents.
Advanced Manufacturing of Torsionally Flexible Vacuum Bellows
Explore the source record for details and available documents.
DESIGN OF LOW DENSITY ARCHITECTURED METAMATERIALS WITH HIGH COMPRESSIVE AND TORSIONAL STIFFNESS
Explore the source record for details and available documents.
Mapping of Texture and Phase Fractions in Heterogeneous Stress States during Multiaxial Loading of Biomedical Superelastic NiTi
Thermoelastic deformation mechanisms in polycrystalline biomedical-grade superelastic NiTi are spatially mapped using in situ neutron diffraction during multiaxial loading and heating. The trigonal R-phase is formed from the cubic phase during cooling to room temperature and subsequently deforms in compression, tension, and torsion. The resulting R-phase variant microstructure from the variant reorientation and detwinning processes are equivalent for the corresponding strain in tension and compression, and the variant microstructure is reversible by isothermal loading. The R-phase variant microstructure is consistent between uniaxial and torsional loading when the principal stress directions of the stress state are considered (for the crystallographic directions observed here). The variant microstructure evolution is tracked and the similarity in general behavior between uniaxial and torsional loading, in spite of the implicit heterogeneous stress state associated with torsional loading, pointed to the ability of the reversible thermoelastic transformation in NiTi to accommodate stress and strain mismatch with deformation. This ability of the R-phase, despite its limited variants, to accommodate stress and strain and satisfy strain incompatibility in addition to the existing internal stresses has significance for reducing irrecoverable deformation mechanisms during loading and cycling through the phase transformation.
Can magnetogenesis driven by dynamo instabilities in chiral fermion plasmas, favor Einstein–Cartan AdS cosmology?
In this letter we show that the magnetic field (MF) bounds induced by Einstein–Cartan–de Sitter (EC) with AdS anti-de Sitter spacetime geometry and fermionic torsion with chiral dynamo plasmas instabilities, with inhomogeneous uniform chiral chemical potential, indicates that there is a possibility, as far as magnetogenesis is concerned, that we may obtain more stringent results within ECAdS gravity, compared with general relativity (GR) limits obtained by Tsagas using torsionless magnetogenesis. Spinorial fermionic source with torsion induces a chiral plasmas oscillation. The time dependent chiral chemical potential, sometimes associated formally with torsion, (de Andrade, 2018), is obtained from chiral flipping equation. The MFs obtained from the present universe ECdS chiral dynamo model, meet the criteria of galactic seed fields with better limits within Tsagas range (Tsagas, 2015) seed galactic magnetic fields for dynamo mechanisms, than the bound obtained by chiral dynamos in torsionless AdS cosmology. Majorana neutrinos are used as spatial components of axial spin-torsion source of dynamo instability from neutrino asymmetry.
Considerations for testing full-scale wind turbine nacelles with hardware-in-the-loop
In this paper, pole placement control techniques are utilized to compensate for variations in the torsional dynamics resulting from the different boundary conditions experienced by a wind turbine nacelle when mounted on a test bench. Simulation case studies are used to understand the baseline torsional characteristics of the nacelle coupled to the test bench versus that coupled to the rotor. It was found that the frequency shifts by up to 200% and 400% for the first and second torsional modes, respectively. The feasibility of utilizing pole placement technique to match the torsional characteristics of the turbine on the test bench is investigated using PI and PID controllers. Here, the performance of the tuned controller is then verified under two test scenarios: Low Voltage Ride Through (LVRT), and a highly dynamic turbulent wind input. It is demonstrated that tuning the test bench speed controller can effectively shift the poles of the closed-loop system to match the desired first and second modes of the full turbine and replicate transient field events on the test bench.
On the role of symmetry in quenching OH tunneling in 2,6-dimethylphenol
Here, we model the spectroscopy of the two methyl torsional degrees of freedom coupled to the OH torsional motion in 2,6-dimethylphenol. Recent gas-phase rotational transitions [Welsh et al ., J. Phys. Chem. Lett. 17 , 3749–3758 (2026)] have been interpreted to be the result of certain symmetry states of the methyl groups leading to the quenching of the OH torsional motion. Both a three-dimensional model and an adiabatic model, in which the OH torsion is treated as the slow mode, are developed to test these conjectures. Good agreement is found between the exact and approximate adiabatic models. The adiabatic model is developed to interpret and elucidate the key couplings leading to the quenching of the tunneling splitting.
Separability of the Dirac equation in the STU black hole spacetime: Pairwise-equal charge case study
We study the separability of the Dirac equation in the background of four dimensional charged rotating asymptotically flat black hole solution of supergravity and the low energy string theory known as STU black hole. In particular, we analyze in detail the separability conditions in the pairwise equal charge STU black hole space-time. While in the latter case the minimally coupled Dirac equation is not separable, the introduction of a specific torsion term ensures the separability. The source of the torsion is the Kalb-Ramond field, which is an integral part of string theory, but further aspects of its properties and coupling to fermionic fields remain to be studied. To derive the torsion, two different approaches are used in conformally related frames, showing that the torsion is not unique. The correspondingly modified Dirac equations in the Einstein and string frames are shown to be separable. Furthermore, the massless radial and angular wave equations are examined; they show close similarity with corresponding equations for the standard Kerr background. A generalization of the Teukolsky equation for the pairwise equal case is conjectured. We also briefly analyze a technically sophisticated radial equation in the massive case.
Anti-Arrhenius behavior of electron transfer reactions in molecular dimers
Rates of chemical reactions typically accelerate as the temperature rises, following the Arrhenius law. However, electron transfer reactions may exhibit weak temperature dependence or counterintuitive behavior, known as anti-Arrhenius behavior, wherein reaction rates decrease as temperature increases. Solvent reorganization energy and torsion-induced changes in electronic couplings could contribute to this unusual behavior, but how each contributes to the overall temperature dependence is unclear. One can decelerate the charge recombination process in photogenerated radical pairs or charge-separated states by harnessing this often-overlooked phenomenon. This means that we could achieve long-lived radical pairs without relying on conventional cooling. Using a series of homo molecular dimers, we showed that the degree of torsional hindrance dictates temperature-dependent torsion-induced changes in electronic coupling and, therefore, charge recombination rates. The overall temperature dependence is controlled by how changes in electronic coupling and the temperature-dependent solvent reorganization energy contribute to the rates of charge recombination. Our findings pave the way for rationally designing molecules that exhibit anti-Arrhenius behavior to slow down charge recombination, opening possibilities for applications in energy-related and quantum information technologies.
Experimental and computational studies of the kinetics of the reaction of hydrogen peroxide with the amidogen radical
In this work, the pulsed-laser photolysis/laser-induced fluorescence method is used to study the kinetics of the reaction of NH 2 with H 2 O 2 to yield a second-order rate constant of (2.42 ± 0.55) × 10 –14 cm 3 molecule –1 s –1 at 412 K in 10–22 mbar of Ar bath gas. There are no prior measurements for comparison. To check this value and enable reliable extrapolation to other temperatures, we also compute thermal rate constants for this process over the temperature range 298–3000 K via multi-structural canonical variational transition-state theory with small-curvature multidimensional tunneling (MS-CVT/SCT). The CVT/SCT rate constants are derived using a dual-level direct dynamics approach utilizing single-point CCSD(T)-F12b/cc-pVQZ-F12 energies—corrected for core-valence and scalar relativistic effects—and M06-2X/MG3S geometries, gradients, and Hessians—for all stationary and non-stationary points along the reaction path. The multistructural method with torsional anharmonicity, based on a coupled torsional potential, is then employed to calculate correction factors for the rate constants, accounting for the comprehensive effects of torsional anharmonicity on the kinetics of this reaction system. The final MS-CVT/SCT rate constants are found to be in good agreement with our measurements and can be expressed in modified Arrhenius form as 2.13 × 10 –15 (T/298 K) 4.02 exp(–513 K/T) cm 3 molecule –1 s –1 over the temperature range of 298–3000 K.
Excited-state vibronic coherences and intramolecular charge transfer dynamics of the photoinactive cyanobacteriochrome NpF2164g5
We have characterized the excited-state structural dynamics that follow optical excitation of the photoinactive cyanobacteriochrome (CBCR) NpF2164g5 to determine the first events along the photoisomerization reaction coordinate of the phycocyanobilin (PCB) chromophore in red-to-green photoactive CBCRs. Within 25 fs of photoexcitation to the first excited singlet state, S1, a cross peak begins to develop below the diagonal of the broadband two-dimensional electronic spectrum (2DES) owing to the formation of a twisted conformation of the PCB chromophore with an enhanced intramolecular charge-transfer (ICT) character. Excited-state coherent wavepacket motions, including a torsion of the methine bridge between rings C and D and the carbon–hydrogen out-of-plane (HOOP) wagging vibration, are rapidly damped as the cross peak forms. This finding supports an assignment of the torsional and HOOP modes to the reaction coordinate of a coherent nonadiabatic mechanism. The ICT process is accompanied by an ultrafast Stokes shift and rapidly damped oscillations at the torsional mode’s frequency, which are sensed by measurements of the energy gap of the cross peak using its first moment with respect to the detection frequency axis of the 2DES spectrum. Furthermore, these results have the further implication that polar side chains of nearby amino acid residues in the binding site of the PCB chromophore can manipulate the barrier height for photoisomerization in red-to-green photoactive CBCRs and in phytochromes by redistributing the π-electron density along the methine bridge between the C and D rings.
Fracture toughness evaluations for spent nuclear fuel dry storage canister welds and spent nuclear fuel clad-pellet structures
Integrity of spent nuclear fuel (SNF) interim storage canisters is very important to the safety of the back-end nuclear fuel cycle. Stress corrosion cracking (SCC) potential of interim storage canister has been considered as a high priority. Because no post-weld heat treatment was required for forming these canisters, the high tensile residual stress existed within these canister welds. This can change the fracture resistance capacity significantly as well as increase SCC potential. Due to relative thin shell thickness of a canister weldment, the spiral notch torsion test (SNTT) method was used to estimate the canister weldment fracture toughness. SNTT was developed to measure the intrinsic fracture toughness of structural materials using small specimens. The SNTT method has been applied to a wide variety of structural materials, such as low-alloy steels, stainless steel, aluminum alloy, ceramics, concrete, and composites. The SNTT system operates by applying pure torsion to cylindrical specimens with a notch line that spirals around the specimen at a 45° pitch. In order to carry out pure torsion load mode, biaxial tension/torsion tester was developed accordingly to perform SNTT protocol. Moreover, applying fracture mechanics approach to SNF system reliability investigation is warranted due to the inherent flaws and hydride structures existed in a SNF system after nuclear reactor operation. However, none of the existing fracture toughness data deal with fuel cladding specific geometry or spent fuel material conditions, such as cladding structure with the pellet-inserts and the associated pellet clad mechanical interactions induced mixed-mode damage mechanisms. Thus, the development of an intrinsic fracture mechanics approach that is suitable for SNF materials is needed. Furthermore, due to thin wall and small dimension of clad tubing structure, the SNTT method was used to estimate the clad tubing structure fracture toughness. Fracture testing were performed on the received stainless steel canister weldment, most SNTT weld samples fracture initiation sites are at heat-affected zone (HAZ) regions. The estimated fracture toughness J Q ’ for the baseline SS304 steel is at 283 kJ/m². The estimated JQ’ for the SS304/308 weld and baseline metals are 148 kJ/m 2 and 459 kJ/m 2 , respectively. Out of cell fracture testing for spent fuel structure were carried out on the surrogate rods made of Zr-4 clad and alumina inserts, the estimated fracture toughness values for baseline Zr-4 cladding with alumina-pellet inserts are: (1) For SNTT samples with a short or medium crack length, between 5.4-mm and 8-mm, the estimate J IQ upon fracture initiation for the baseline Zr-4 cladding is at 50 kJ/m 2 with 2-sigma uncertainty of 3.26 kJ/m 2 , and the associated K IQ is at 67.46 MPa$\sqrt{m}$; and (2) For SNTT samples with a long crack length, around 13-mm, the crack initialization is deviated from that of the Mode-I tensile fracture and appears to be a mixed-mode fracture of Mode I - tensile stress and Mode III - out of plane shear stress; the estimated J MQ is at 18.9 kJ/m 2 , the associated K MQ is at 41.4 MPa$\sqrt{m}$.
Understanding the Origin of Structural Diversity of DNA Double Helix
Deciphering the contribution of DNA subunits to the variability of its 3D structure represents an important step toward the elucidation of DNA functions at the atomic level. In the pursuit of that goal, our previous studies revealed that the essential conformational characteristics of the most populated “canonic” BI and AI conformational families of Watson–Crick duplexes, including the sequence dependence of their 3D structure, preexist in the local energy minima of the elemental single-chain fragments, deoxydinucleoside monophosphates (dDMPs). Those computations have uncovered important sequence-dependent regularity in the superposition of neighbor bases. The present work expands our studies to new minimal fragments of DNA with Watson–Crick nucleoside pairs that differ from canonic families in the torsion angles of the sugar-phosphate backbone (SPB). To address this objective, computations have been performed on dDMPs, cdDMPs (complementary dDMPs), and minimal fragments of SPBs of respective systems by using methods of molecular and quantum mechanics. These computations reveal that the conformations of dDMPs and cdDMPs having torsion angles of SPB corresponding to the local energy minima of separate minimal units of SPB exhibit sequence-dependent characteristics representative of canonic families. In contrast, conformations of dDMP and cdDMP with SPB torsions being far from the local minima of separate SPB units exhibit more complex sequence dependence.
Development of Coarse-Grained Models for Poly(4-vinylphenol) and Poly(2-vinylpyridine): Polymer Chemistries with Hydrogen Bonding
In this paper, we identify the modifications needed in a recently developed generic coarse-grained (CG) model that captured directional interactions in polymers to specifically represent two exemplary hydrogen bonding polymer chemistries—poly(4-vinylphenol) and poly(2-vinylpyridine). We use atomistically observed monomer-level structures (e.g., bond, angle and torsion distribution) and chain structures (e.g., end-to-end distance distribution and persistence length) of poly(4-vinylphenol) and poly(2-vinylpyridine) in an explicitly represented good solvent (tetrahydrofuran) to identify the appropriate modifications in the generic CG model in implicit solvent. For both chemistries, the modified CG model is developed based on atomistic simulations of a single 24-mer chain. This modified CG model is then used to simulate longer (36-mer) and shorter (18-mer and 12-mer) chain lengths and compared against the corresponding atomistic simulation results. We find that with one to two simple modifications (e.g., incorporating intra-chain attraction, torsional constraint) to the generic CG model, we are able to reproduce atomistically observed bond, angle and torsion distributions, persistence length, and end-to-end distance distribution for chain lengths ranging from 12 to 36 monomers. We also show that this modified CG model, meant to reproduce atomistic structure, does not reproduce atomistically observed chain relaxation and hydrogen bond dynamics, as expected. Simulations with the modified CG model have significantly faster chain relaxation than atomistic simulations and slower decorrelation of formed hydrogen bonds than in atomistic simulations, with no apparent dependence on chain length.
Test of Harmonic Coil Accuracy Using a Multi Vertex Probe
Magnets are integral components of particle accelerators, with different multipoles used to perform various beam conditioning functions, like steering and focusing. Testing accelerator magnets to ensure compliance with specification is a crucial step of fabrication. One of the most popular techniques for verifying magnetic field strength and integrity is the harmonic coil probe. Harmonic coil probes are comprised of passive loops that are rotated around the aperture of a magnet and are used to measure magnetic flux. Oftentimes the measurements of the harmonic coil probe are affected by transverse vibrations along the axis of rotation and torsional vibrations of the position closure sensor, both causing spurious harmonics. To make matters challenging, it is difficult to distinguish between the real harmonics of the magnet and the spurious harmonics during analysis. This research explores the use of a novel configuration of harmonic coil probe, Multi-Vertex Probe (MVP), to address multiple factors that affect the accuracy and repeatability of harmonic coil probe measurement. Most of the results are based on simulation data, in which artificial torsional distortions are introduced and removed with the proposed processing method. In addition to implementing torsional vibration removal in simulation, laboratory analysis regarding the source of vibrations was performed using a pre-fabricated MVP. More specifically, various mechanical conditions were used to explore the standard deviation of main harmonic’s flux amplitude. The conditions included: coupling type (rigid or soft), rotation speed, probe starting position within magnetic field, and cabling location inside the magnetic field. Along with this, the MVP’s measured noise floor in and outside a magnetic field was quantified.
Laboratory Drilling Test Data of PDC bits with Sierra White Granite Rock
This file contains unprocessed drilling data tests on Sierra White Granite (SWG) using two new PDC bits. The tests were conducted at Sandia National Laboratories (SNL) in the Hard Rock Drilling Facility (HRDF). The collected data includes ROP data at rotational speeds of 80, 120, and 160 RPMs, with incremental weight on bit (WOB) up to 5100 lbs. The diameter of the 4-bladed and 5-bladed PDC bits was 3 3/4" and supplied by National Oilwell Varco (NOV). Five tests modes were conducted for both bits, which are as follow: (1) Rigid configuration, with no vibration compliance (2) Flywheel configuration (3) Torsional compliance configuration (4) Axial Compliance configuration (5) Combined Axial and Torsional compliance configuration Note: the WOB and torque in the drilling data should be calibrated by zeroing the WOB and torque when the drill bit tags the rock sample.
Processable High Electron Mobility {pi}-Copolymers via Mesoscale Backbone Conformational Ordering
The synthesis and experimental/theoretical characterization of a new series of electron-transporting copolymers based on the naphthalene bis(4,8-diamino-1,5-dicarboxyl)amide (NBA) building block are reported. Comonomers are designed to test the emergent effects of manipulating backbone torsional characteristics, and density functional theory (DFT) analysis reveals the key role of backbone conformation in optimizing electronic delocalization and transport. The NBA copolymer conformational and electronic properties are characterized using a broad array of molecular/macromolecular, thermal, optical, electrochemical, and charge transport techniques. All NBA copolymers exhibit strongly aggregated morphologies with significant nanoscale order. Copolymer charge transport properties are investigated in thin-film transistors and exhibit excellent electron mobilities ranging from 0.4 to 4.5 cm(2) V-1 s(-1). Importantly, the electron transport efficiency correlates with the film mesoscale order, which emerges from comonomer-dependent backbone planarity and extension. These results illuminate the key NBA building block structure-morphology-bulk property design relationships essential for processable, electronics-applicable high-performance polymeric semiconductors.