Search NASA⌕ Search

SEARCH · Search NASA

Results for “Views”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

O Corona, where art thou? eROSITA’s view of UV-optical-IR variability-selected massive black holes in low-mass galaxies

Finding massive black holes (MBHs,M BH ≈ 10 4 –10 7 M ⊙ ) in the nuclei of low-mass galaxies $\left( {{M_*}\mathop {\mathop < \limits_ }\limits_ {{10}^{10}}{M_ \odot }} \right)$ is crucial to constrain seeding and growth of black holes over cosmic time, but it is particularly challenging due to their low accretion luminosities. Variability selection via long-term photometric ultraviolet, optical, or infrared (UVOIR) light curves has proved effective and identifies lower-Eddington ratios compared to broad and narrow optical spectral lines searches. In the inefficient accretion regime, X-ray and radio searches are effective, but they have been limited to small samples. Therefore, differences between selection techniques have remained uncertain. Here, we present the first large systematic investigation of the X-ray properties of a sample of known MBH candidates in dwarf galaxies. We extracted X-ray photometry and spectra of a sample of ~200 UVOIR variability-selected MBHs and significantly detected 17 of them in the deepest available SRG/eROSITA image, of which four are newly discovered X-ray sources and two are new secure MBHs. This implies that tens to hundreds of LSST MBHs will have SRG/eROSITA counterparts, depending on the seeding model adopted. Surprisingly, the stacked X-ray images of the many non-detected MBHs are incompatible with standard disk-corona relations, typical of active galactic nuclei, inferred from both the optical and radio fluxes. They are instead compatible with the X-ray emission predicted for normal galaxies. After careful consideration of potential biases, we identified that this X-ray weakness needs a physical origin. A possibility is that a canonical X-ray corona might be lacking in the majority of this population of UVOIR-variability selected low-mass galaxies or that unusual accretion modes and spectral energy distributions are in place for MBHs in dwarf galaxies. This result reveals the potential for severe biases in occupation fractions derived from data from only one waveband combined with SEDs and scaling relations of more massive black holes and galaxies.

Astronomy & Astrophysics↗
DOE OSTI2024

Atomic view of photosynthetic metabolite permeability pathways and confinement in synthetic carboxysome shells

Carboxysomes are protein microcompartments found in cyanobacteria, whose shell encapsulates rubisco at the heart of carbon fixation in the Calvin cycle. Carboxysomes are thought to locally concentrate CO 2 in the shell interior to improve rubisco efficiency through selective metabolite permeability, creating a concentrated catalytic center. However, permeability coefficients have not previously been determined for these gases, or for Calvin-cycle intermediates such as bicarbonate (HCO$^–_3$), 3-phosphoglycerate, or ribulose-1,5-bisphosphate. Starting from a high-resolution cryogenic electron microscopy structure of a synthetic β-carboxysome shell, we perform unbiased all-atom molecular dynamics to track metabolite permeability across the shell. The synthetic carboxysome shell structure, lacking the bacterial microcompartment trimer proteins and encapsulation peptides, is found to have similar permeability coefficients for multiple metabolites, and is not selectively permeable to HCO$^–_3$ relative to CO 2 . To resolve how these comparable permeabilities can be reconciled with the clear role of the carboxysome in the CO 2 -concentrating mechanism in cyanobacteria, complementary atomic-resolution Brownian Dynamics simulations estimate the mean first passage time for CO 2 assimilation in a crowded model carboxysome. Despite a relatively high CO 2 permeability of approximately 10 -2 cm/s across the carboxysome shell, the shell proteins reflect enough CO 2 back toward rubisco that 2,650 CO 2 molecules can be fixed by rubisco for every 1 CO 2 molecule that escapes under typical conditions. The permeabilities determined from all-atom molecular simulation are key inputs into flux modeling, and the insight gained into carbon fixation can facilitate the engineering of carboxysomes and other bacterial microcompartments for multiple applications.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

A molecular view of peptoid-induced acceleration of calcite growth

The extensive deposits of calcium carbonate (CaCO 3 ) generated by marine organisms constitute the largest and oldest carbon dioxide (CO 2 ) reservoir. These organisms utilize macromolecules like peptides and proteins to facilitate the nucleation and growth of carbonate minerals, serving as an effective method for CO 2 sequestration. However, the precise mechanisms behind this process remain elusive. In this study, we report the use of sequence-defined peptoids, a class of peptidomimetics, to achieve the accelerated calcite step growth kinetics with the molecular level mechanistic understanding. By designing peptoids with hydrophilic and hydrophobic blocks, we systematically investigated the acceleration in step growth rate of calcite crystals using in situ atomic force microscopy (AFM), varying peptoid sequences and concentrations, CaCO 3 supersaturations, and the ratio of Ca 2+ / HCO 3 − . Mechanistic studies using NMR, three-dimensional fast force mapping (3D FFM), and isothermal titration calorimetry (ITC) were conducted to reveal the interactions of peptoids with Ca 2+ and HCO 3 − ions in solution, as well as the effect of peptoids on solvation and energetics of calcite crystal surface. Our results indicate the multiple roles of peptoid in facilitating HCO 3 − deprotonation, Ca 2+ desolvation, and the disruption of interfacial hydration layers of the calcite surface, which collectively contribute to a peptoid-induced acceleration of calcite growth. These findings provide guidelines for future design of sequence-specific biomimetic polymers as crystallization promoters, offering potential applications in environmental remediation (such as CO 2 sequestration), biomedical engineering, and energy storage where fast crystallization is preferred.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Overview of ASDEX upgrade results in view of ITER and DEMO

Experiments on ASDEX Upgrade (AUG) in 2021 and 2022 have addressed a number of critical issues for ITER and EU DEMO. A major objective of the AUG programme is to shed light on the underlying physics of confinement, stability, and plasma exhaust in order to allow reliable extrapolation of results obtained on present day machines to these reactor-grade devices. Concerning pedestal physics, the mitigation of edge localised modes (ELMs) using resonant magnetic perturbations (RMPs) was found to be consistent with a reduction of the linear peeling-ballooning stability threshold due to the helical deformation of the plasma. Conversely, ELM suppression by RMPs is ascribed to an increased pedestal transport that keeps the plasma away from this boundary. Candidates for this increased transport are locally enhanced turbulence and a locked magnetic island in the pedestal. The enhanced D-alpha (EDA) and quasi-continuous exhaust (QCE) regimes have been established as promising ELM-free scenarios. Here, the pressure gradient at the foot of the H-mode pedestal is reduced by a quasi-coherent mode, consistent with violation of the high-n ballooning mode stability limit there. This is suggestive that the EDA and QCE regimes have a common underlying physics origin. In the area of transport physics, full radius models for both L- and H-modes have been developed. These models predict energy confinement in AUG better than the commonly used global scaling laws, representing a large step towards the goal of predictive capability. A new momentum transport analysis framework has been developed that provides access to the intrinsic torque in the plasma core. In the field of exhaust, the X-Point Radiator (XPR), a cold and dense plasma region on closed flux surfaces close to the X-point, was described by an analytical model that provides an understanding of its formation as well as its stability, i.e., the conditions under which it transitions into a deleterious MARFE with the potential to result in a disruptive termination. With the XPR close to the divertor target, a new detached divertor concept, the compact radiative divertor, was developed. Here, the exhaust power is radiated before reaching the target, allowing close proximity of the X-point to the target. No limitations by the shallow field line angle due to the large flux expansion were observed, and sufficient compression of neutral density was demonstrated. With respect to the pumping of non-recycling impurities, the divertor enrichment was found to mainly depend on the ionisation energy of the impurity under consideration. In the area of MHD physics, analysis of the hot plasma core motion in sawtooth crashes showed good agreement with nonlinear 2-fluid simulations. This indicates that the fast reconnection observed in these events is adequately described including the pressure gradient and the electron inertia in the parallel Ohm’s law. Concerning disruption physics, a shattered pellet injection system was installed in collaboration with the ITER International Organisation. Thanks to the ability to vary the shard size distribution independently of the injection velocity, as well as its impurity admixture, it was possible to tailor the current quench rate, which is an important requirement for future large devices such as ITER. Progress was also made modelling the force reduction of VDEs induced by massive gas injection on AUG. The H-mode density limit was characterised in terms of safe operational space with a newly developed active feedback control method that allowed the stability boundary to be probed several times within a single discharge without inducing a disruptive termination. Regarding integrated operation scenarios, the role of density peaking in the confinement of the ITER baseline scenario (high plasma current) was clarified. The usual energy confinement scaling ITER98(p,y) does not capture this effect, but the more recent H20 scaling does, highlighting again the importance of developing adequate physics based models. Advanced tokamak scenarios, aiming at large non-inductive current fraction due to non-standard profiles of the safety factor in combination with high normalised plasma pressure were studied with a focus on their access conditions. A method to guide the approach of the targeted safety factor profiles was developed, and the conditions for achieving good confinement were clarified. Based on this, two types of advanced scenarios (‘hybrid’ and ‘elevated’

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

XRISM/Resolve view of Abell 2319: Turbulence, sloshing, and ICM dynamics

Here, we present results from XRISM/Resolve observations of the core of the galaxy cluster Abell 2319, focusing on its kinematic properties. The intracluster medium (ICM) exhibits temperatures of approximately 8 keV across the core, with a prominent cold front and a high-temperature region (⁠~11 keV) in the north-west. The average gas velocity in the 3' x 4' region around the brightest cluster galaxy (BCG) covered by two Resolve pointings is consistent with that of the BCG to within 40 km s -1 ⁠ and we found modest average velocity dispersion of 230–250 km s -1 ⁠. On the other hand, spatially resolved spectroscopy reveals interesting variations. A blueshift of up to ~230 km s -1 ⁠ is observed around the east edge of the cold front, where the gas with the lowest specific entropy is found. The region further south inside the cold front shows only a small velocity difference from the BCG; however, its velocity dispersion is enhanced to ~400 km s -1 ⁠, implying the development of turbulence. These characteristics indicate that we are observing sloshing motion with some inclination angle following BCG and that gas phases with different specific entropy participate in sloshing with their own velocities, as expected from simulations. No significant evidence for a high-redshift ICM component associated with the subcluster Abell 2319B was found in the region covered by the current Resolve pointings. These results highlight the importance of sloshing and turbulence in shaping the internal structure of Abell 2319. Further deep observations are necessary to better understand the mixing and turbulent processes within the cluster.

Astronomy and AstroPhysics↗
DOE OSTI2025

XRISM view of a stellar flare: High-resolution Fe K spectra of HR 1099, an RS CVn-type star

A high-resolution X-ray spectroscopic observation was made of the RS CVn-type binary star HR 1099 using the Resolve instrument onboard XRISM for its calibration purposes. During the $\sim$400 ks telescope time covering 1.5 binary orbit, a flare lasting for $\sim$100 ks was observed with a released X-ray radiation energy of ${\sim }10^{34}$ erg, making it the first stellar flare ever observed with an X-ray microcalorimeter spectrometer. The flare peak count rate is 6.4 times higher than that in quiescence and is distinguished clearly in time thanks to the long telescope time. Many emission lines were detected in the 1.7–10 keV range both in the flare and quiescent phases. Using the high spectral resolution of Resolve in the Fe K band (6.5–7.0 keV), we resolved the inner-shell lines of Fe XIX-XXVI as well as the outer-shell lines of Fe XXV-XXVI . These lines have peaks in the contribution functions at different temperatures over a wide range, allowing us to construct the differential emission measure (DEM) distribution over the electron temperature of 1–10 keV (roughly 10–100 MK) based only on Fe lines, thus without an assumption of the elemental abundance. The reconstructed DEM has a bimodal distribution, and only the hotter component increased during the flare. The elemental abundance was derived based on the DEM distribution thus constructed. A significant abundance increase was observed during the flare for Ca and Fe, which are some of the elements with the lowest first ionization potential among those analyzed, but not for Si, S, and Ar. This behavior is seen in some giant solar flares and the present result is a clear example in stellar flares.

Astronomy and AstroPhysics↗
DOE OSTI2026

Pairing around a single Dirac point: A unifying view of Kohn-Luttinger superconductivity in Chern bands, quarter metals, and topological surface states

Superconductivity of a single two-dimensional Dirac fermion offers a natural route to topological superconductivity. While usually considered extrinsic—arising from proximity to a conventional superconductor—we investigate when a doped Dirac cone can develop superconductivity from a short-range repulsive interaction 𝑈 via the Kohn–Luttinger mechanism. We show that an ideal, linear Dirac cone is immune to pairing at leading order in 𝑈 2 . Superconductivity instead emerges only through higher-order in 𝑘 corrections to the dispersion, which are unavoidable in any lattice realization and crucially dictate the pairing symmetry. The form of the pairing thus reflects how the well-known obstruction to realizing a single Dirac cone on a lattice is circumvented. When a Dirac cone arises from broken time-reversal symmetry—for instance, at a transition between Chern insulators or in a valley-polarized phase—we find a topological 𝑝−𝑖⁢𝑝 state whose chirality is opposite to that of the parent chiral metal above 𝑇 𝑐 . By contrast, for a surface Dirac cone of a 3D topological insulator, superconductivity is stabilized by anisotropies in the dispersion. For 𝐶 3⁢𝑣 -symmetric warping, as in , pairing is strongest when the Fermi surface becomes hexagonal, leading to order in the (𝑑±𝑖⁢𝑑)×(𝑝+𝑖⁢𝑝) channel with accidental near-nodes. In the highly anisotropic limit 𝑣 𝑥 ≫𝑣 𝑦 , relevant to side surfaces of layered materials, the Fermi surface splits into two branches, and nesting favors a pairing symmetry 𝛥∼s⁢g⁡n⁢(𝑘 𝑥 )⁢cos⁡(𝑘 𝑦 ) reminiscent of organic superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Close-up view of the interplay between lattice distortions and charge density waves: Case study on rare-earth nickel carbides

Using variable temperature total x-ray scattering and large-scale structure modeling, we study the temperature and composition evolution of lattice distortions and charge density waves (CDWs) in the archetypal strongly correlated system RENi⁢ C 2 (RE=Dy, Tb, Gd, and Sm). Joint analysis of reciprocal and real space data reveals the presence of strong lattice distortions that, depending on the RE species and temperature, appear periodic or remain local, forming a complex CDW phase diagram. Apparently, the CDWs in RENi⁢ C 2 materials arise from a common to the system lattice instability involving diverse distortion modes that persist when magnetic order also sets in at very low temperature. In conclusion, the results support the notion that intrinsic lattice distortions are important to the emergence of exotic electronic phases in strongly correlated systems and call for their further investigation using the advanced approach adopted here.

36 MATERIALS SCIENCE↗
DOE OSTI2026

DECADE+ DES Y3 Weak Lensing Mass Map: A 13,000 deg $\^{} 2$ View of Cosmic Structure from 270 Million Galaxies

We present the largest galaxy weak lensing mass map of the late-time Universe, reconstructed from 270 million galaxies in the DECADE and DES Year 3 datasets, covering 13,000 square degrees. We validate the map through systematic tests against observational conditions (depth, seeing, etc.), finding the map is statistically consistent with no contamination. The large area covered by the mass map makes it a well-suited tool for cosmological analyses, cross-correlation studies and the identification of large-scale structure features. We demonstrate its potential by detecting cosmic filaments directly from the mass map for the first time and validating them through their association with galaxy clusters selected using the Sunyaev-Zeldovich effect from Planck and ACT DR6.

Gatti, M.↗
DOE OSTI2025

Dual View of the Z 2 -Gauged XY Model in 3D

The 𝑍 2 -gauged XY model is of long-standing interest both in the context of nematic order, and the study of fractionalization and superconductivity. This Letter presents heuristic arguments that no deconfinement of the XY field occurs in this model and presents results of a large-scale Monte Carlo simulations on a cubic lattice that are consistent with this conclusion. Furthermore, the correlation radius determining the confinement is found to be growing rapidly as a function of the parameters in the phase featuring the nematic order. Thus, mesoscopic properties of the system can mimic deconfinement with high accuracy in some part of the phase diagram.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Holographic View of Mixed-State Symmetry-Protected Topological Phases in Open Quantum Systems

We establish a holographic duality between d -dimensional mixed-state symmetry-protected topological (mSPT) phases and ( d + 1 ) -dimensional subsystem symmetry-protected topological (SSPT) states. Specifically, we show that the reduced density matrix of the boundary layer of a ( d + 1 ) -dimensional SSPT state with subsystem symmetry S and global symmetry G corresponds to a d -dimensional mSPT phase with strong S and weak G symmetries. Conversely, we demonstrate that the wave function of an SSPT state can be constructed by replicating the density matrix of the corresponding lower-dimensional mSPT phase. This mapping links the density matrix in lower dimensions to the entanglement properties of higher-dimensional wave functions, providing an approach for analyzing nonlinear quantities and quantum information metrics in mixed-state systems. Our duality offers a new perspective for studying intrinsic mSPT phases that are unique to open quantum systems, without pure-state analogues. We show that strange correlators and twisted Rényi- N correlators can diagnose these nontrivial phases and we explore their connection to strange correlators in pure-state SSPT phases. Furthermore, we discuss several implications of this holographic duality, including a method for preparing intrinsic mSPT phases through the duality. Published by the American Physical Society 2025

Sun, Shijun (ORCID:0000000168880030)↗
DOE OSTI2026

Modeling Multi-View Impedance-Based Cross-Geometry SOH Estimator for Li-ion Batteries

Abstract: Accurately estimating battery’s State of Health (SOH) remains challenging when models must generalize across cell designs and operating conditions. Most Electrochemical Impedance Spectroscopy (EIS)-based approaches either (i) hand-engineer a few Nyquist-plot features for shallow models—fast but does not generalize across geometries—or (ii) learn directly from Nyquist plots with deep networks, which removes manual feature extraction, yet still limited to a single plot type. As a result, cross-geometry robustness and deployability on constrained Internet of Things (IoT) devices remain open problems. We propose a compact Convolutional Neural Network (CNN) (∼ 10k parameters) that takes multi-representation EIS inputs—Nyquist (real/imaginary) and phase–magnitude (|Z|/ϕ) stacked as four channels, so the model can learn complementary degradation signatures while remaining small enough for fast inference. We build a dataset from cyclic aging of two geometries (LG INR18650MJ1 cylindrical cells and LIR2032 coin cells), acquire EIS every ten cycles from 10 kHz to 10 mHz (10 points/decade), and evaluate with leave-one-cell-out testing strategy. We further study fusion vs. single-representation inputs and assess feasibility for on-device deployment (e.g., NVIDIA Jetson device). The results show that training on multiple EIS representations improves SOH estimation accuracy and cross-geometry generalization compared to single-representation models, which uses only Nyquist or phase–magnitude plots. This design targets accurate, generalizable SOH prediction without manual feature engineering while enabling practical real-time use.

Bakr, Ahmed [The University of Alabama (UA)]↗
DOE OSTI2025

Transforming Energy Through Computational Excellence: A View From NREL

At the National Renewable Energy Laboratory (NREL)—a U.S. Department of Energy laboratory—computational science, high-performance computing, applied mathematics, advanced computer science, visualization, and data play a pivotal role in advancing energy abundance, affordability, security, and reliability. From fundamental scientifc discovery to systems engineering and analysis, NREL researchers tackle market-relevant challenges to develop solutions for an independent energy system that is reliable, resilient and secure. Collaborative partnerships with industry, government, and academia ensure that our research remains cutting edge, impactful, applicable, and aligned with real-world energy needs. This special issue of Computing in Science & Engineering highlights exemplary NREL projects where computational tools and methodologies drive discovery and accelerate innovation in scalable and integrated energy systems. The featured articles explore the role of computational modeling, high-performance computing, generative AI, and adaptive computing in advancing independent energy solutions, optimizing sustainability research, and enhancing decision-making for energy solutions using a broad mix of energy technologies. Here, these contributions demonstrate how NREL’s computational research bridges the gap between theoretical advancements and practical implementation, emphasizing interdisciplinary collaboration and a commitment to innovation, with a focus on translating computational excellence into real-world impact, thus accelerate progress toward national energy goals. By showcasing cutting-edge research at the intersection of computational science and energy systems, this issue aims to inspire and inform researchers, practitioners, and policymakers dedicated to shaping a more reliable energy future.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Bringing Different Views Together: A Hybrid Cooperative Perception Framework for Connected Autonomous Vehicles

Cooperative perception will be essential for connected autonomous vehicles to enhance object recognition and optimize path planning by sending data information about the surrounding environment. However, an inherent challenge in existing systems is the high bandwidth cost of transmitting information in real-time, which restricts cooperative perception’s practicality. Here, this work presents a hybrid cooperative perception fusion framework aimed at mitigating this issue by optimizing data transmission according to available bandwidth or through data reduction techniques. Our methods ensure that vehicles can rapidly transmit high-confidence data without overwhelming the network. Experimental results indicate that our methodology substantially diminishes data transmission sizes while maintaining object detection accuracy. For cooperative perception in autonomous vehicle systems, our approach provides a scalable and effective way to get past the bandwidth barrier.

Carrillo, Dominic [Univ. of North Texas, Denton, T↗
DOE OSTI2025

Random Walks With Tweedie: A Unified View of Score-Based Diffusion Models [In the Spotlight]

We present a concise derivation for several influential score-based diffusion models that relies on only a few textbook results. Diffusion models have recently emerged as powerful tools for generating realistic, synthetic signals—particularly natural images—and often play a role in state-of-the-art algorithms for inverse problems in image processing. While these algorithms are often surprisingly simple, the theory behind them is not, and multiple complex theoretical justifications exist in the literature. Here, in this study, we provide a simple and largely self-contained theoretical justification for score-based diffusion models that is targeted towards the signal processing community. This approach leads to generic algorithmic templates for training and generating samples with diffusion models. We show that several influential diffusion models correspond to particular choices within these templates and demonstrate that alternative, more straightforward algorithmic choices can provide comparable results. This approach has the added benefit of enabling conditional sampling without any likelihood approximation.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

A Panoramic View of Temperature and Field Distributions of the Structured Catalyst Under Microwave Irradiation Using Experimental and Modeling Approaches

This is a presentation covers NETL's recent research outcome in numerical modeling of microwave-assisted catalytic reaction. In this presentation, the intrinsic microwave-material interaction was demonstrated in this study through numerical modeling and experimental measurement. Different material combinations and reactor setups were investigated and compared. By combining numerical modeling with advanced measurement techniques, the microwave-material interaction and the relationship between electromagnetic field and heating can be better understood, which further benefits the development of microwave-assisted reactors and their application in process intensification.

Bai, Xinwei↗
DOE OSTI2024

RF Frontiers for Particle Physics, the US View

In this talk I provide an update on the RF research for future colliders in the U.S., through the prism of Snowmass and P5 report. During Snowmass, we considered various applications of RF technology to the proposed future colliders and other accelerator- and non-accelerator-based experiments. P5 narrowed down the choices of future machines. The colliders include circular and linear $e^+ e^-$ Higgs factories, and longer-term options such as muon and hadron high energy colliders. I will start with Snowmass and P5 recommendations. As it is impossible to cover all possible RF R&D topics, I will discuss only three critical topics relevant to future colliders: efficiency of RF power sources, cold normal conducting RF, and cavities for ionization channel of muon collider. Progress on SRF accelerating cavities for future colliders will be covered in a separate talk. The choice of topics reflects my preference and in some cases ignorance, which I think is inevitable when one tries to cover such a broad subject.

43 PARTICLE ACCELERATORS↗