Search NASA⌕ Search

SEARCH · Search NASA

Results for “Volatile analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Solvent Hold Tank Sample Results for MCU-19-2-3-4 (January 2019), MCU-19-83-84-85 (February 2019), MCU-19-208-209-210 (March 2019) and MCU-19-138-139-140 (March special trim): Quarterly Report

A trend summary of three sets of Solvent Hold Tank (SHT) monthly samples (MCU-19-2-3-4, MCU-19-83-84-85, MCU-19-208-209-210); and a set from a special trim (MCU-19-138-139-140) are reported. Most of the conclusions are based on the March SHT sample (MCU-18-208-209-210). Analyses of the March SHT sample (MCU-19-208-209-210) indicated that the Modifier (Cs-7SB) and the Extractant (MaxCalix) concentrations were below their nominal recommended concentrations (169,000 mg/L and 46,900 mg/L, respectively) by 3% and 6%, respectively. The Suppressor (N,N’,N”–tris(3,7-dimethyloctyl)guanidine or TiDG) concentration has increased since the January 2019 measurement to 1141 mg/L, which is above the minimum recommended concentration (479 mg/L). These new concentrations are consistent with the concentrations observed when MCU was fully operational in 2016. The Semi-Volatile Organic Analysis (SVOA) did not detect any impurities. However, the Fourier Transform Hydrogen Nuclear Magnetic Resonance (FT-HNMR) analysis detected presence of phthalates at a few ppm. The impurity concentration was highest in the January sample and consistently detected in the February and March samples (but always registered as a few ppm or less). Another impurity observed in the samples was mercury. Based on the March SHT sample, up to 25 ± 5 micrograms of mercury per mL of solvent was detected (as the average of the Direct Mercury Analysis (DMA) and X-Ray Fluorescence (XRF) methods). The higher mercury concentration in the solvent (as determined in the last three-monthly samples) is possibly due to the higher mercury concentration in Salt Batches 9 and 10. The gamma concentration (~2.55E5 dpm/mL) measured in the March 2019 SHT samples was consistent with previous values observed when MCU was operating continuously (for example, between December 2016 and January 2017). Statistical analysis of the different analytical methods detected a bias (a statistical difference at 5% level) between the FT-HNMR and HPLC methods when measuring the MaxCalix and Modifier concentration; the FT-HNMR gave a higher concentration possibly due to peak overlapping in the measured data. A bias was also detected when measuring total mercury by the DMA method versus the XRF method with the XRF method reported higher mercury concentrations. The laboratory will continue to monitor the quality of the solvent for any new impurities or degradation of the solvent components.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Solvent Hold Tank Sample Results for MCU-19-366- 367-368 (April 2019), MCU-19-469-470-471 (May 2019), MCU-19-524-525-526 (June 2019): Quarterly Report

A trend summary of three sets of Solvent Hold Tank (SHT) monthly samples MCU-19-366-367-368 (April), MCU-19-469-470-471 (May), and MCU-19-524-525-526 (June) are reported. Most of the conclusions are based on the June SHT sample (MCU-19-524-525-526). Analyses of the June SHT sample (MCU-19-524- 525-526) indicated that the Modifier (Cs-7SB) and the Extractant (MaxCalix) concentrations were below their nominal recommended concentrations (169,000 mg/L and 46,900 mg/L respectively) by 4% and 2% respectively but consistent with previously observed levels during normal runs. The Suppressor (N,N’,N”– tris(3,7-dimethyloctyl)guanidine or TiDG) concentration has decreased since the March 2019 measurement to 793 mg/L, which is above the minimum recommended concentration (479 mg/L). The Semi-Volatile Organic Analysis (SVOA) did not detect any impurities. However, the Fourier Transform Hydrogen Nuclear Magnetic Resonance (FT-HNMR) analysis detected presence of phthalates at a few ppm. The impurity concentration was highest in the April sample and consistently detected in the May and June samples (but always registered as a few ppm or less). Another impurity observed in the samples was mercury. Based on the June SHT sample, up to 25 ± 5 micrograms of mercury per mL of solvent was detected (as the average of the Direct Mercury Analysis (DMA) and X-Ray Fluorescence (XRF) methods). The higher mercury concentration in the solvent (as determined in the last three-monthly samples) is possibly due to the higher mercury concentration in Salt Batches 9 and 10. The gamma concentration (~2.90E4 dpm/mL) measured in the June 2019 SHT samples was consistent with previous values observed when the Modular Caustic-Side Solvent Extraction Unit (MCU) was operating continuously (for example, between December 2016 and January 2017). Statistical analysis of the different analytical methods detected a bias between the FT-HNMR and the High Performance Liquid Chromatography (HPLC) methods when measuring the MaxCalix and Modifier concentrations; the FT-HNMR gave a higher concentration possibly due to peak overlapping in the measured data. A bias was detected when measuring total mercury by the DMA method versus the XRF method with the XRF method reported higher mercury concentrations. The laboratory will continue to monitor the quality of the solvent for any new impurities or degradation of the solvent components.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Solvent Hold Tank Sample Results for MCU-19-569-571 (December 2019), MCU-20-1-28 (January 2020), and MCU-20-29-30-31 (June 2020) (Quarterly Report)

A trend summary of three Solvent Hold Tank (SHT) monthly samples MCU-19-569-570-571 (December 2019), MCU-20-1-28 (January 2020), and MCU-20-29-30-31 (June 2020) are reported. Most of the conclusions are based on the June 2020 SHT sample (MCU-20-29-30-31). Analyses of the June 2020 SHT sample indicated that the Modifier (Cs-7SB) and the Extractant (MaxCalix) concentrations were above their nominal recommended concentrations (169,000 mg/L and 46,900 mg/L respectively) by 6% and 7% respectively. The Suppressor (N,N’,N”–tris(3,7-dimethyloctyl)guanidine or TiDG) concentration has remained at 833 ± 16 mg/L, but it is above the minimum recommended concentration (479 mg/L). The Semi-Volatile Organic Analysis (SVOA) and FT-HNMR did not detect any organic impurities. Another impurity observed in the samples was mercury. Based on the June 2020 SHT sample, up to 23 ± 5 micrograms of mercury per gram of solvent (or 19 ± 4 mg/L) was detected. The mercury concentration steadily decreased from 34.8 ug/g solvent (or 21.9 mg/L) in the December 2019 SHT sample to 34.8 ug/g solvent (or 19 mg/L) in the June 2020 SHT sample. The gamma concentration (~3.33E4 dpm/mL) measured in the June 2020 SHT samples was consistent with previous values observed when MCU was idle (for example, between February 2017 and August 2017). If additional SHT samples become available, the laboratory will continue to monitor the quality of the solvent for any new impurities or degradation of the solvent components.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Adding coal dust to coal batch

The granulometric composition of coke dust from the dry-slaking machine is determined. The influence of additions of 3-7% coke dust on the quality of industrial coking batch and the coke obtained by box coking is estimated. Adding 1% coke dust to coking batch does not markedly change the coke quality. Industrial equipment for the supply of dry-slaking dust to the batch is described.

01 COAL, LIGNITE, AND PEAT↗

Measurement of Volatile Compounds for Real-Time Analysis of Soil Microbial Metabolic Response to Simulated Snowmelt

Snowmelt dynamics are a significant determinant of microbial metabolism in soil and regulate global biogeochemical cycles of carbon and nutrients by creating seasonal variations in soil redox and nutrient pools. With an increasing concern that climate change accelerates both snowmelt timing and rate, obtaining an accurate characterization of microbial response to snowmelt is important for understanding biogeochemical cycles intertwined with soil. However, observing microbial metabolism and its dynamics non-destructively remains a major challenge for systems such as soil. Microbial volatile compounds (mVCs) emitted from soil represent information-dense signatures and when assayed non-destructively using state-of-the-art instrumentation such as Proton Transfer Reaction-Time of Flight-Mass Spectrometry (PTR-TOF-MS) provide time resolved insights into the metabolism of active microbiomes. In this study, we used PTR-TOF-MS to investigate the metabolic trajectory of microbiomes from a subalpine forest soil, and their response to a simulated wet-up event akin to snowmelt. Using an information theory approach based on the partitioning of mutual information, we identified mVC metabolite pairs with robust interactions, including those that were non-linear and with time lags. The biological context for these mVC interactions was evaluated by projecting the connections onto the Kyoto Encyclopedia of Genes and Genomes (KEGG) network of known metabolic pathways. Simulated snowmelt resulted in a rapid increase in the production of trimethylamine (TMA) suggesting that anaerobic degradation of quaternary amine osmo/cryoprotectants, such as glycine betaine, may be important contributors to this resource pulse. Unique and synergistic connections between intermediates of methylotrophic pathways such as dimethylamine, formaldehyde and methanol were observed upon wet-up and indicate that the initial pulse of TMA was likely transformed into these intermediates by methylotrophs. Increases in ammonia oxidation signatures (transformation of hydroxylamine to nitrite) were observed in parallel, and while the relative role of nitrifiers or methylotrophs cannot be confirmed, the inferred connection to TMA oxidation suggests either a direct or indirect coupling between these processes. Overall, it appears that such mVC time-series from PTR-TOF-MS combined with causal inference represents an attractive approach to non-destructively observe soil microbial metabolism and its response to environmental perturbation.

59 BASIC BIOLOGICAL SCIENCES↗

Technoeconomic and Life Cycle Analysis of an Integrated Fermentation and Microbial Electrochemical Process for Volatile Fatty Acid Production from Food Waste

Techno-economic analysis (TEA) and life cycle assessment (LCA) were conducted for an integrated system designed for the production of volatile fatty acid (VFA) from food waste. The TEA estimated a production cost of $\$$3.12/kg VFA, and the LCA predicted negative greenhouse gas (GHG) emissions of -0.4 kg CO 2 e/kg VFA, driven primarily by diverting organic waste from landfills and avoiding methane emissions while producing valuable chemical products. Hotspot analysis showed arrested methanogenesis (AM) fermentation as the largest contributor to costs (37%) and environmental burden (47%), driven by high sodium hydroxide (NaOH) consumption. Distillation and microbial electrosynthesis (MES) units were the next-largest environmental contributors (28% and 18%). Major cost drivers also included residuals management (biosolids and wastewater) and the equipment and operating costs for AM, MES, and sonication pretreatment units. Although the new integrated system is environmentally benign, its costs and environmental impacts can be further reduced by integrating alternative energy sources, minimizing chemical and energy inputs through process optimization, and improving efficiency. In conclusion, this work highlighted the viability of waste-derived VFA production and provided a clear, data-driven strategy to accelerate the commercialization of waste valorization technology.

Carboxylic Acid Production↗

Contribution of Ryugu-like material to Earth’s volatile inventory by Cu and Zn isotopic analysis

We report initial analyses showed that asteroid Ryugu’s composition is close to CI (Ivuna-like) carbonaceous chondrites (CCs) – the chemically most primitive meteorites, characterized by near-solar abundances for most elements. However, some isotopic signatures (for example, Ti, Cr) overlap with other CC groups, so the details of the link between Ryugu and the CI chondrites are not yet fully clear. Here we show that Ryugu and CI chondrites have the same zinc and copper isotopic composition. As the various chondrite groups have very distinct Zn and Cu isotopic signatures, our results point at a common genetic heritage between Ryugu and CI chondrites, ruling out any affinity with other CC groups. Since Ryugu’s pristine samples match the solar elemental composition for many elements, their Zn and Cu isotopic compositions likely represent the best estimates of the solar composition. Earth’s mass-independent Zn isotopic composition is intermediate between Ryugu/CC and non-carbonaceous chondrites (NCs), suggesting a contribution of Ryugu-like material to Earth’s budgets of Zn and other moderately volatile elements.

58 GEOSCIENCES↗

Comprehensive Chemical Fingerprinting by Multidimensional GC and Supervised Machine Learning

This project leveraged advances in machine learning based data analysis techniques and untargeted analytical methods for organic analysis to progress nuclear nonproliferation technologies beyond current capabilities. The developed approaches can be used to detect and identify complex chemical fingerprints of facilities of interest. These techniques have been developed for fields such as metabolomics and genomics but have not been applied to nuclear nonproliferation applications. Adaptation of these techniques for volatile organic compound analysis has far reaching application within the scientific community including environmental chemistry, atmospheric physics, and climate sciences.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Comprehensive Chemical Fingerprinting by Multidimensional GC and Supervised Machine Learning

This project leverages advances in machine learning based data analysis techniques and untargeted omic analytical methods to progress nuclear nonproliferation technologies beyond current capabilities. The developed approaches can be used to identify and detect complex chemical fingerprints of facilities of interest. These techniques have been developed for fields such as metabolomics and genomics but have not been applied to nuclear nonproliferation applications. Adaptation of these techniques for volatile organic compound analysis has far reaching application within the scientific community including environmental chemistry, atmospheric physics, and climate sciences.

97 MATHEMATICS AND COMPUTING↗

Decomposition of NH3BH3 at sub-ambient pressures: A combined thermogravimetry-differential thermal analysis-mass spectrometry study

We report a systematic study of the isothermal decomposition of ammonia borane, NH3BH3, at 363 K as a function of argon pressure ranging between 50 and 1040 mbar using thermogravimetry and differential thermal analysis coupled with mass analysis of the volatile species. During thermal aging at 363 K, evolution of hydrogen, aminoborane and borazine is monitored, with the relative mass loss strongly depending on the pressure in the reaction chamber. Furthermore, the induction period required for hydrogen release at 363 K decreases with decreasing pressure.

08 HYDROGEN↗

Investigations on the Thermal Stability and Kinetics of Biolubricants Synthesized from Different Types of Vegetable Oils

Petroleum-based lubricants raise environmental concerns due to their non-biodegradability and toxicity, whereas biobased lubricants underperform owing to low thermal stability. This study examined and compared three vegetable oils, along with their chemically modified versions, to better understand their suitability as biolubricants. High oleic soybean oil (HOSOY), regular soybean oil (RSOY), and waste cooking oil (WCO) were subjected to chemical modification, where isopropyl groups were attached to the fatty acid chains of the oils to produce branched oils, i.e., b-HOSOY, b-RSOY, and b-WCO. The detailed kinetic study of each regular and modified sample was investigated using thermogravimetric analysis. The kinetic parameters, such as the activation energies, reaction rate, and pre-exponential factor, were generated via Friedman methods. The differential thermal gravimetric (DTG) analysis showed low volatilization at the onset temperature in each modified oil as compared with the unmodified samples under an oxidative environment. Furthermore, the comparative kinetic studies demonstrated the enhanced thermoxidative stability of the modified products relative to their unaltered counterparts. Among the tested oils, the b-RSOY showed an average activation energy of 325 kJ/mol, followed by the b-WCO: 300 kJ/mol and the b-HOSOY: 251 kJ/mol, indicating the most stable modified product under an oxidative environment. For all the samples, the pre-exponential factors were in good agreement with the activation energies, which validates that finding the pre-exponential components is crucial to the kinetic analysis.

Sarker, Majher I. (ORCID:0000000299509274)↗

Supply chain system for a centralized biorefinery system based on switchgrass grown on marginal land in Michigan

The feedstock supply chain of a biorefinery is critical in determining the economic and environmental performance of biofuels. This study investigated various feedstock supply chains for a centralized biorefinery based on different objective functions and how the biorefinery responds to supply chain volatility. For the analysis, a hypothetical centralized biorefinery was supplied by switchgrass grown on marginal lands in Michigan. From an economic standpoint, the minimum biofuel selling price is an important metric of the objective function, and the greenhouse gas mitigation potential is a similarly important metric for global warming impact. A trade-off therefore exists between the economic and environmental performance of biofuels under this system configuration. However, when a carbon tax credit is applied to soil organic carbon sequestration in switchgrass production, the metric of the objective function may not be the key factor in establishing a supply chain as long as it is associated with biorefinery capacity as well as economic or environmental values. Year-to-year fluctuations in cellulosic biomass yield (supply chain volatility) might also prevent the biorefinery from operating at full capacity. Cellulosic biomass pellets can serve as an auxiliary feedstock for the centralized cellulosic biorefinery system to minimize the impacts of supply chain volatility.

09 BIOMASS FUELS↗

High temperature polymer degradation: Rapid IR flow-through method for volatile quantification

Accelerated aging of polymers at elevated temperatures often involves the generation of volatiles. These can be formed as the products of oxidative degradation reactions or intrinsic pyrolytic decomposition as part of polymer scission reactions. A simple analytical method for the quantification of water, CO 2 , and CO as fundamental signatures of degradation kinetics is required. Here, we describe an analytical framework and develops a rapid mid-IR based gas analysis methodology to quantify volatiles that are contained in small ampoules after aging exposures. The approach requires identification of unique spectral signatures, systematic calibration with known concentrations of volatiles, and a rapid acquisition FTIR spectrometer for time resolved successive spectra. Furthermore, the volatiles are flushed out from the ampoule with dry N2 carrier gas and are then quantified through spectral and time integration. This method is sufficiently sensitive to determine absolute yields of ~50 μg water or CO 2 , which relates to probing mass losses of less than 0.01% for a 1 g sample, i.e. the early stages in the degradation process. Such quantitative gas analysis is not easily achieved with other approaches. Our approach opens up the possibility of quantitative monitoring of volatile evolution as an avenue to explore polymer degradation kinetics and its dependence on time and temperature.

36 MATERIALS SCIENCE↗

Investigating the relation between instantaneous driving decisions and safety critical events in naturalistic driving environment

The availability of large-scale naturalistic driving data provides enormous opportunities for studying relationships between instantaneous driving decisions prior to involvement in safety critical events (SCEs). This study investigates the role of driving instability prior to involvement in SCEs. While past research has studied crash types and their contributing factors, the role of pre-crash behavior in such events has not been explored as extensively. The research demonstrates how measures and analysis of driving volatility can be leading indicators of crashes and contribute to enhancing safety. Highly detailed microscopic data from naturalistic driving are used to provide the analytic framework to rigorously analyze the behavioral dimensions and driving instability that can lead to different types of SCEs such as roadway departures, rear end collisions, and sideswipes. Modeling results reveal a positive association between volatility and involvement in SCEs. Specifically, increases in both lateral and longitudinal volatilities represented by Bollinger bands and vehicular jerk lead to higher likelihoods of involvement in SCEs. Further, driver behavior related factors such as aggressive driving and lane changing also increases the likelihood of involvement in SCEs. Driver distraction, as represented by the duration of secondary tasks, also increases the risk of SCEs. Likewise, traffic flow parameters play a critical role in safety risk. The risk of involvement in SCEs decreases under free flow traffic conditions and increases under unstable traffic flow. Further, the model shows prediction accuracy of 88.1 % and 85.7 % for training and validation data. These results have implications for proactive safety and providing in-vehicle warnings and alerts to prevent the occurrence of such SCEs.

99 GENERAL AND MISCELLANEOUS↗

Atomic layer deposition of molybdenum oxide using bis(tert-butylimido)bis(dimethylamido) molybdenum

Molybdenum trioxide films have been deposited using thermal atomic layer deposition techniques with bis(tert-butylimido)bis(dimethylamido)molybdenum. Films were deposited at temperatures from 100 to 300 °C using ozone as the oxidant for the process. The Mo precursor was evaluated for thermal stability and volatility using thermogravimetric analysis and static vapor pressure measurements. Film properties were evaluated with ellipsometry, x-ray photoelectron spectroscopy, secondary ion mass spectroscopy, and secondary electron microscopy. The growth rate per cycle was determined to extend from 0.3 to 2.4 Å/cycle with <4% nonuniformity (1-sigma) with-in-wafer across a 150 mm wafer for the investigated temperature range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗