Search NASA⌕ Search

SEARCH · Search NASA

Results for “WAVEGUIDE RADIATOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Electromagnetic wave propagation and wave-vector diagram in space-time periodic media.

Analysis of TE and TM wave propagation in space-time periodic media such as dielectrics, isotropic plasmas and uniaxial plasmas. A numerical solution is obtained for media with sinusoidal periodicity. Wave-vector diagrams are plotted to facilitate studies of dipole radiation, wave propagation in waveguides and wave interactions with a half-space.

Elachi, C.↗
NASA NTRS1995

Designing A Mode Converter For Use With A Gyrotron

Report describes process of designing corrugated, circular-cross-section length of waveguide converting input electromagnetic radiation at frequency of 34.5 GHz in TM(11) mode to output radiation in HE(11) mode. TM(11)-mode input radiation supplied by gyrotron generating continuous-wave power of 200 kW at 34.5 GHz in TE(01) mode followed by TE(01)-to-TM(11) mode converter. Together, gyrotron and mode converters constitute prototype high-power transmitter for long-distance free-space communication.

Hoppe, Daniel J.↗
NASA NTRS1993

Development of Leaky Wave Antennas for Layered Ridge Dielectric Waveguide

The millimeter wave, especially above 100 GHz, and the submillimeter wave frequency spectrum offers the possibility for narrow-beam, high-resolution antennas which are critical for high definition radars required for space debris tracking, airport ground avoidance radars, and missile tracking. In addition, the frequency which most atmospheric constituents may be detected lie in this part of the frequency spectrum. Therefore, the development of electronic components for millimeter/submillimeter wave passive sensors is required for environmental monitoring of the Earth's atmosphere. Typical microwave transmission lines such as microstrip and coplanar waveguide rely on two or more electrical conductors to concentrate and guide the electromagnetic energy. Unfortunately, the surface resistance of the conductors increases as the square root of frequency. In addition, the circuit dimensions must be decreased with increasing frequency to maintain a single mode transmission line which further increases the conductor loss. An alternative family of transmission lines are formed from two or more insulating materials and rely on the differences in the permittivities between the two materials to guide the wave. No metal conductors are required although some dielectric waveguides do utilize a metallic ground plane to facilitate the interconnections of active electrical elements or to reduce the transmission line size. Examples of such transmission lines are image guides, insulated image guides, trapped image guides, ridge guide, and layered ridge dielectric waveguide (LRDW). Although most dielectric waveguides have dimensions on the order of lambda to provide sufficient field confinement, the LRDW has been shown to provide good field confinement for electrically small lines. This offers an advantage in circuit integration. It has been shown that a periodic array of metallic strips placed either along or on top of a dielectric waveguide forms an effective radiator. This antenna is easy to fabricate and there is good background of microstrip type antenna design information in the literature. This paper reports the development of the first frequency scanning antenna fed by a LRDW.

Ponchak, George E.↗
NASA NTRS1988

Optical Backplane Interconnect Technology (OBIT)

We describe and analyze a novel approach to implementing an Optical Backplane Interconnect Technology (OBIT) that is capable of optically connecting any row of a 32x32 backplane array to any row of a second 32x32 array. Each backplane array is formed monolithically on a wafer. The technology is based on the use of Grating Surface Emitting (GSE) waveguides formed on a wafer containing quantum-well and separate confinement waveguide layers. These layers are used for transverse guiding, gain, modulation, detection, and for the formation of wavelength tunable distributed-Bragg reflector lasers. The required surface structures are formed photolithographically. The GSE waveguides act as efficient antennae that radiate light at angles selected by tuning the wavelength of the lasers. The same waveguides may be used as the receiving antennae when the array is used in the receiving mode. Thus, wavelength tuning is used to direct each row of the transmitting array to the desired row of the receiving array. In summary: The optical backplane array will have the following characteristics: Any row of a 32x32 GSE array may be optically connected to any row of a second 32x32 array. Only one switch decision is required to switch 32 parallel connections to any one of 32 positions. Each monolithic array can be used as both transmitter and receiver by switching the bias on the quantum-well switch-detectors. Separate transmitting and receiving structures could be provided for duplex operation. For a bit error rate of 10 sup 9 at 100-MHz data rate, a required laser power of 12 mW is calculated based on an estimated total optical loss of 40 dB.

Hammer, J. M.↗
NASA NTRS2001

Radiation Losses Due to Tapering of a Double-Core Optical Waveguide

The theoretical model we designed parameterizes the power losses as a function of .the profile shape for a tapered, single mode, optical dielectric coupler. The focus of this project is to produce a working model that determines the power losses experienced by the fibers when light crosses a taper region. This phenomenon can be examined using coupled mode theory. The optical directional coupler consists of a parallel, dual-channel, waveguide with minimal spacing between the channels to permit energy exchange. Thus, power transfer is essentially a function of the taper profile. To find the fields in the fibers, the approach used was that of solving the Helmholtz equation in cylindrical coordinates involving Bessel and modified Bessel functions depending on the location.

Lyons, Donald R.↗
NASA NTRS1998

Optical Waveguide Output Couplers Fabricated in Polymers

Waveguide output couplers fabricated in Norland Optical Adhesive (NOA) #81 and AMOCO Ultradel 9020D polyimide are investigated. The output couplers are implemented using periodic relief gratings on a planar waveguide. Design theory of the couplers is based on the perturbation approach. Coupling of light from waveguide propagation modes to output radiation modes is described by coupled mode theory and the transmission line approximation of the perturbed area (grating structure). Using these concepts, gratings can be accurately designed to output a minimum number of modes at desired output angles. Waveguide couplers were designed using these concepts. These couplers were fabricated and analyzed for structural accuracy, output beam accuracy, and output efficiency. The results for the two different materials are compared.

Watson, Michael D.↗
NASA NTRS1976

Analysis of the radiation patterns of reflector antennas

The development and application of a numerical technique for rapid calculation of the far-field radiation patterns of a reflector antenna from either a measured or computed feed pattern are reported. The reflector is defined by the intersection of a cone with any surface of revolution or an offset sector of any surface of revolution. The feed is assumed to be linearly polarized and can have an arbitrary location. Both the copolarized and the cross-polarized reflector radiation patterns are computed. Calculations using the technique compare closely with measured radiation patterns of a waveguide-fed offset parabolic reflector. Unique features of this technique are freedom from restrictive feed assumptions and the numerical methods used in preparing the aperture-plane electric-field data for integration.

Kauffman, J. F.↗
NASA NTRS2004

The Case for Space-Borne Far-Infrared Line Surveys

The combination of sensitive direct detectors and a cooled aperture promises orders of magnitude improvement in the sensitivity and survey time for far-infrared and submillimeter spectroscopy compared to existing or planned capabilities. Continuing advances in direct detector technology enable spectroscopy that approaches the background limit available only from space at these wavelengths. Because the spectral confusion limit is significantly lower than the more familiar spatial confusion limit encountered in imaging applications, spectroscopy can be carried out to comparable depth with a significantly smaller aperture. We are developing a novel waveguide-coupled grating spectrometer that disperses radiation into a wide instantaneous bandwidth with moderate resolution (R ~ 1000) in a compact 2-dimensional format. A line survey instrument coupled to a modest cooled single aperture provides an attractive scientific application for spectroscopy with direct detectors. Using a suite of waveguide spectrometers, we can obtain complete coverage over the entire far-infrared and sub-millimeter. This concept requires no moving parts to modulate the optical signal. Such an instrument would be able to conduct a far-infrared line survey 10 6 times faster than planned capabilities, assuming existing detector technology. However, if historical improvements in bolometer sensitivity continue, so that photon-limited sensitivity is obtained, the integration time can be further reduced by 2 to 4 orders of magnitude, depending on wavelength. The line flux sensitivity would be comparable to ALMA, but at shorter wavelengths and with the continuous coverage needed to extract line fluxes for sources at unknown redshifts. For example, this capability would break the current spectroscopic bottleneck in the study of far-infrared galaxies, the recently discovered, rapidly evolving objects abundant at cosmological distances.

Bock, J. J.↗
NASA NTRS1980

The Resonant Cavity Radiator (RCR)

The fundamental theory of MW antenna operation and basic array technology development status was used in the design of the 1-km diameter 5-Gw SPS microwave antenna. However, the aperture size and the high efficiency requirements make the MW antenna extremely complex. Studies show that the slotted waveguide array is one of the most efficient radiators for the antenna. Subsequent analyses show that the temperature interface between waveguides and dc-RF conversion tubes can cause severe thermal design problems on the array. An alternate design, the Resonant Cavity Radiator, is described here.

Schroeder, K. G.↗
NASA NTRS1993

Antenna pattern control using impedance surfaces

A hybrid numerical technique is developed for electrically large pyramidal horn antennas radiating in free space. A stepped-waveguide method is used to analyze the interior surfaces of the horn transition. The Electric Field Integral Equation (EFIE) is employed on the outer surfaces of the pyramidal horn including the radiating aperture. Meanwhile, the Magnetic Field Integral Equation (MFIE) is used on the aperture to relate the aperture fields and those in the horn transition. The resultant hybrid field integral equation (HFIE) is solved numerically by the method of moments. This formulation is both accurate and numerically stable so that high-gain microwave pyramidal horns can be analyzed rigorously. Far-field radiation patterns, both computed and measured, are presented for three electrically-large x-band horn antennas. The comparisons demonstrate that this method is accurate enough to predict the fine pattern structure at wide angles and in the back region. Computed far-field patterns and aperture field distribution of two smaller x-band horns are also presented along with a discussion on the validity of the approximate aperture field distributions routinely used in the analysis and design of pyramidal horns.

Balanis, Constantine A.↗
NASA NTRS1987

Beam waveguides in the Deep Space Network

A beam waveguide is a mechanism for guiding electromagnetic radiation from one part of an antenna to another through a series of reflectors. Appropriate placement of reflectors on an antenna allows a beam to be guided around the elevation axis and/or below the alidade. The beam waveguide permits placement of all electronics in a room on the alidade below the elevation axis, or below the alidade; feed horn covers to be protected from the weather; and feed electronics to be in spacious rooms rather than in crowded cones, and always level rather than tipping with change in elevation angle. These factors can lead to lower costs in implementation such as Ka-band, better antenna performance at X-band, more efficient and stable performance of transmitters and receivers, and lower maintenance and operating costs. Studies are underway to determine methods for converting the major antennas of the Deep Space Network (DSN) to beam waveguide operations by 1995.

Clauss, R. C.↗
NASA NTRS1985

Numerical methods for analyzing electromagnetic scattering

Numerical methods to analyze electromagnetic scattering are presented. The dispersions and attenuations of the normal modes in a circular waveguide coated with lossy material were completely analyzed. The radar cross section (RCS) from a circular waveguide coated with lossy material was calculated. The following is observed: (1) the interior irradiation contributes to the RCS much more than does the rim diffraction; (2) at low frequency, the RCS from the circular waveguide terminated by a perfect electric conductor (PEC) can be reduced more than 13 dB down with a coating thickness less than 1% of the radius using the best lossy material available in a 6 radius-long cylinder; (3) at high frequency, a modal separation between the highly attenuated and the lowly attenuated modes is evident if the coating material is too lossy, however, a large RCS reduction can be achieved for a small incident angle with a thin layer of coating. It is found that the waveguide coated with a lossy magnetic material can be used as a substitute for a corrugated waveguide to produce a circularly polarized radiation yield.

Lee, S. W.↗
NASA NTRS1991

Antenna pattern control using impedance surfaces

The implementation of a moment method code for the analysis of horn antennas was accomplished. The code can analyze the antenna with or without lossy material coatings. It predicts the antenna gain, voltage standing wave ratio (VSWR) on the feeding waveguide, the existing modes on the radiating aperture, and radiation patterns of the antenna. Many computations were performed on three pyramidal horn antennas, and their radiation and VSWR's are presented and compared with experimental data. Although the code is still being finalized, some discussions on using the code are included.

Balanis, Constantine A.↗