Search NASA⌕ Search

SEARCH · Search NASA

Results for “Weathering Rates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Influence of plateau, slope, and valley on soil hydrology during the dry season in a Central Amazon old‐growth forest

Soil moisture regulates plant water supply and drought sensitivity in tropical forests, yet its vertical and topographic variation remains poorly characterized. We combined high-frequency time-domain reflectometry measurements from 5 to 100 cm across plateau, slope, and valley landforms at the Zona Florestal 2 research site north of Manaus, Central Amazonia, to quantify how soil moisture memory, timing of responses to rainfall, dry-down rates (τ), and soil–water depletion vary across these contrasting landforms. Landform-specific soil moisture calibration curves ensured accurate volumetric water content estimates in these highly weathered soils. During the 2023 dry-to-wet transition (August–November), soil moisture memory showed strong topographic contrasts, with valley profiles increasing from ∼47 h at 5 cm to ∼154 h at 100 cm, while plateaus exhibited higher near-surface persistence (∼124 h at 5 cm) but weaker memory at depth. Dry-down behavior reinforced these differences as valley soils exhibited τ values exceeding ∼200 h, more than double the characteristic τ of plateau soils (∼90 h). Rainfall–soil moisture correlations indicated immediate responses at shallow depths in valleys and progressively longer lags with depth on plateaus and slopes. These hydrologic patterns were mirrored in depletion profiles, which declined sharply below 30 cm on plateaus but remained high and sustained throughout the upper meter in slopes and valleys. Together, these findings provide the first depth-resolved field measurements of soil moisture memory, rainfall coupling, dry-down constants, and depletion dynamics across major upland landforms in Central Amazonia and offer clear observational benchmarks for improving land-surface and ecosystem model representations of soil–water processes.

Hillslope↗
DOE OSTI2026

Towards Scaling Law Analysis For Spatiotemporal Weather Data

Compute-optimal scaling laws are relatively well studied for NLP and CV, where objectives are typically single-step and targets are comparatively homogeneous. Weather forecasting is harder to characterize in the same framework: autoregressive rollouts compound errors over long horizons, outputs couple many physical channels with disparate scales and predictability, and globally pooled test metrics can disagree sharply with per-channel, late-lead behavior implied by short-horizon training. We extend neural scaling analysis for autoregressive weather forecasting from single-step training loss to long rollouts and per-channel metrics. We quantify (1) how prediction error is distributed across channels and how its growth rate evolves with forecast horizon, (2) if power law scaling holds for test error, relative to rollout length when error is pooled globally, and (3) how that fit varies jointly with horizon and channel for parameter, data, and compute-based scaling axes. We find strong cross-channel and cross-horizon heterogeneity: pooled scaling can look favorable while many channels degrade at late leads. We discuss implications for weighted objectives, horizon-aware curricula, and resource allocation across outputs.

Kiefer Jr, Alexander [ORNL] (ORCID:000000025398874↗
DOE OSTI2025

Enhancing traffic safety analysis with digital twin technology: integrating vehicle dynamics and environmental factors into microscopic traffic simulation

Traffic safety is a critical concern in transportation engineering and urban planning. Traditional traffic safety analysis requires trained observers to collect data in the field, which is time-consuming, labor-intensive, and sometimes inaccurate. In recent years, microscopic traffic simulation, which simulates individual vehicles’ movements within a transportation network, have been utilized to study traffic safety. However, microscopic traffic simulation only focuses on traffic-related factors, such as traffic volume, traffic signals, and lane configurations, neglecting vehicle dynamics and environment-related factors like weather and lighting conditions, which can significantly impact traffic safety. In light of this, this paper explores the application of digital twin technology in traffic safety analysis, integrating vehicle simulators, which consider vehicle dynamics and environmental factors, and microscopic traffic simulators, which simulate the operations of traffic flow, for enhanced safety evaluations. Various scenarios, including different weather conditions and visibility levels, are simulated using a digital twin of a road segment in Tuscaloosa, Alabama. The simulations employ Surrogate Safety Measures (SSMs) like Time to Collision (TTC) and Deceleration Rate to Avoid a Crash (DRAC) to assess safety under varying conditions. The results demonstrate that traffic digital twin can identify potential safety issues that traditional microscopic simulation cannot, providing insights for improving traffic control strategies and transportation infrastructure to enhance traffic safety.

Civil engineering↗
DOE OSTI2026

How Frequent Will the Rarest Daily Rainfall Records of Hurricane Ida’s Remnants Be in the Future?

Abstract Gaining continued insights into the impact of global warming on the occurrence of hurricane-associated intense record downpours is essential for building climate resilient communities. This study investigates projected future changes in extreme rainfall over the Northeast United States, as represented by extreme daily amounts during Hurricane Ida in 2021. We used historical control simulations of Weather Research and Forecasting (WRF) Model generated from 40 years of weather events (1980–2014, 12 km) forced by the fifth generation European Centre for Medium-Range Weather Forecasts atmospheric reanalysis. These simulations are thermodynamically modified (2060–2100) via an imposed warming for the high-emission scenario of shared socioeconomic pathway (SSP585) from a range of general circulation models. Ground observations from the Global Historical Climatology Network (1950–2014) and WRF simulations (historical, 1980–2014, and future, 2060–2100) are integrated into a nonstationary generalized extreme value (GEV) framework to assess the frequency of Ida’s heaviest daily rain rates under the SSP585 scenario. Results show that Ida’s daily maximum rainfall recorded at different observation locations was higher than the single highest September daily maximum observed (1950–2014) for 5 out of 17 stations (∼30% of the stations). Ida-like extreme daily rain rates are projected to be, on average, more than 2 times more likely to occur at the end of the century in the simulations (with some regions as high as 5 times). This work demonstrates that integrating a high-resolution atmospheric model’s present-day and thermodynamically modified future simulations along with ground observations, within a nonstationary statistical framework, is crucial for understanding changing characteristics of extreme weather events. Significance Statement Daily scale extreme precipitation is expected to become more frequent and severe, as evidenced by observations and model simulations. While it is important to investigate how these intensifying heavy rainfall events affect current engineering standards, fewer studies have contextualized how warming impacts the most extreme rainfall from a single storm event relative to historical heavy downpours. In this study, we focused on the daily extreme rainfall associated with the extratropical transition of Hurricane Ida (2021), particularly over the northeastern United States—some of which exceeded the commonly used hydrologic design criteria for a 100-yr storm. Using a high-resolution atmospheric model simulation, we investigated how continued warming may influence the frequency of such daily rain rates. Under a high-emission scenario, these events are projected to become up to 5 times more likely at the end of the twenty-first century.

Dollan, Ishrat J↗
DOE OSTI2025

The Impacts of Rotational Mixing on the Precipitation Simulated by a Convection Permitting Model

With increased availability of computational resources, regional and global scale convection-permitting model (CPM, Δx ~ 1–10 km) simulations are becoming more common. CPMs have improved accuracy in their representation of deep convection and mesoscale convective systems (MCSs) compared to coarser resolution models. However, CPMs still exhibit convective cloud and precipitation biases relative to observations, notably a lesser frequency of light precipitation rates and greater frequency of heavy precipitation rates. In this work we hypothesize that these CPM biases are related to under-resolved mixing between convective updrafts and their surrounding environment. To test this hypothesis, we introduce a parameterization to the Weather Research and Forecasting model (WRF) that adds a small angular rotation of the grid-scale flow about the axis perpendicular to the plane of convective drafts. This rotated flow is then allowed to alter advection of moisture and hydrometeors. The effects of such mixing on precipitation characteristics are evaluated in month-long 4-km grid spacing simulations over the Amazon. The enhanced mixing transports moisture and condensate from convective cores to other areas including downdrafts. This increases the frequency of low-precipitable water and light precipitation. It also decreases the frequency of intense precipitation from isolated deep convection and MCSs, increases cloud top temperatures, reduces radar echo-top heights, and increases overall precipitation by altering the relationship of precipitation with precipitable water, in better agreement with observations. The results suggest when optimized using multiple observations, such an approach may provide a path toward more accurate representation of convection and precipitation statistics in convection-permitting simulations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Advancing Understanding of Deep Convective Anvil Clouds

In this project we use ground-based DOE ARM observations, satellite observations, and Weather Research and Forecasting (WRF) model simulations to arrive at a more complete understanding (or, new theory) of how atmospheric heating profiles in thunderstorm cores drives how quickly air rises in the storms. The rate at which air motion increases or decreases with altitude directly relates to how much cloud mass is ejected laterally into the adjacent atmosphere, which then influences the development and maintenance of “stratiform raining cloud anvils”. Our work has led to new equations connecting the heating in these thunderstorms to these stratiform clouds, with the connection modulated by the stability structure of the atmosphere (i.e., if more stable, then a more rapid change in thunderstorm heating with altitude results in more stratiform cloud, independent of whether over land or ocean, or how organized the thunderstorms are). Improving knowledge of stratiform clouds is important, since they contribute to substantial accumulated rainfall (important to agriculture and local hydrology) as well as radiation, given their large areal extents and lifetime. The radiation impacts likely impact simulated cloud feedback in all Earth System models (ESMs).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

High-heat transfer lithium-ion batteries: A new era in battery thermal management

Despite advances in lithium-ion battery technology, critical challenges remain that must be addressed to accelerate electric vehicle (EV) adoption and global energy transformation. Significantly improved battery thermal management (BTM) is key to overcoming these challenges. BTM approaches focus on increasing heat transfer coefficients via air, liquid, or refrigerant cooling, but less attention is given to reducing the battery's thermal resistance, a major bottleneck for heat transfer. This work introduces a novel approach to reduce battery thermal resistance by integrating in-plane heat transfer with optimized cell geometry, minimized thermal resistances, and reduced interfacial resistances, representing a departure from previous methods. The standard prismatic can cell incorporating this technology is referred to as the high heat transfer (HHT) battery. An equivalent resistance battery thermal model is developed for speed and accuracy, validated against experimental data in the literature, demonstrating strong correlation and ensuring reliable predictions for real-world performance. Thermal performance metrics of the conventional and HHT batteries are compared using a parametric study with air, liquid, and refrigerant boundary conditions across a range of aspect ratios. The HHT battery shows a heat removal rate up to 20 times higher than a conventional battery. These findings suggest that HHT technology could be transformative for EV battery performance, enabling fast charging, mitigating thermal runaway, extending battery life, reducing cold-weather power loss, increasing reliability, lowering costs, and enabling higher energy density, all critical for EV adoption and energy transformation. Future work will focus on prototyping and real-world testing to refine these findings for commercial-scale applications.

25 ENERGY STORAGE↗
DOE OSTI2024

From Data to Insights: A Covariate Analysis of the IARPA BRIAR Dataset for Multimodal Biometric Recognition Algorithms at Altitude and Range

This paper examines covariate effects on fused whole body biometrics performance in the IARPA BRIAR dataset, specifically focusing on UAV platforms, elevated positions, and distances up to 1000 meters. The dataset includes outdoor videos compared with indoor images and controlled gait recordings. Normalized raw fusion scores relate directly to predicted false accept rates (FAR), offering an intuitive means for interpreting model results. A linear model is developed to predict biometric algorithm scores, analyzing their performance to identify the most influential covariates on accuracy at altitude and range. Weather factors like temperature, wind speed, solar loading, and turbulence are also investigated in this analysis. The study found that resolution and camera distance best predicted accuracy and findings can guide future research and development efforts in long-range/elevated/UAV biometrics and support the creation of more reliable and robust systems for national security and other critical domains.

Bolme, David↗
DOE OSTI2026

Towards retrieving cloud top entrainment velocities from MISR cloud motion vectors

Although important, direct retrievals of entrainment rates in cloud-topped planetary boundary layer (PBL) remain elusive. Here we present a novel technique for retrieving cloud-top entrainment velocities using only Multi-angle Imaging Spectro-Radiometer (MISR) stereoscopic retrievals of cloud-motion vectors (CMVs) and cloud-top heights (CTHs). Mesoscale vertical air velocity at CTH is diagnosed from the continuity equation and then used to derive entrainment velocities from the PBL mass-budget equation. The algorithm is demonstrated through a case of marine stratocumulus deck off the California coast, with comparisons made against data from the European Centre for Medium-range Weather Forecasts (ECMWF) reanalysis (ERA5) and the data from other satellites. MISR low-cloud CTH for this case were lower than the ERA5 reported PBL depth by 189 ± 87 m. These differences in cloud top heights partly modulate the differences in the ERA5 and MISR horizontal winds, with larger differences in meridional over zonal wind components. Average difference between ERA5 and MISR derived mesoscale vertical air motion at cloud top was 0.14 ± 0.73 cm s −1 , while the same for entrainment rate was −0.09 ± 0.46 cm s −1 . The uncertainties in the utilized CTHs and CMVs are propagated to derive systematic and random retrieval uncertainties. Fractional uncertainty is lower than 25 % when the retrieved mesoscale vertical air motion is stronger than ±0.04 cm s −1 and entrainment velocities are stronger than ±0.03 cm s −1 . These results showcase the ability to derive mesoscale vertical air motion and entrainment rates from MISR observations and motivate its extension to generate a global climatology leveraging its full 23-year record (2000–2022). Nonetheless comprehensive validation of the retrievals is warranted through comparisons with estimates from an independent dataset across diverse weather conditions.

Mitra, Arka [Argonne National Laboratory (ANL), Ar↗
DOE OSTI2024

Evaluation of the EarthSHAB Stratospheric Solar Hot Air Balloon Flight Prediction Model Using Balloon Trajectory Data

Abstract The heliotrope is a solar balloon design which is constructed out of painter’s plastic, and the exterior is coated in charcoal powder. Darkening the plastic gives the balloon a high solar absorptance, which allows it to ascend into the lower stratosphere and float for hours at a time. The balloons have previously been used to lift scientific instruments into the stratosphere to study chemical explosions, earthquakes, and stratospheric aerosols. They have also been proposed as a platform for planetary exploration. Flight predictions are crucial to preflight planning to reduce safety risks and meet flight objectives. However, there exists a wide range of possible flight paths due to varying environmental conditions and solar balloon configurations. EarthSHAB is one such software that was designed to support flight planning using the weather forecasts and balloon properties to predict the flight path of a solar balloon. We compare EarthSHAB-simulated flight paths to a set of observed flight paths for the 3.5-m diameter heliotrope design called the “Cloudskimmer.” Using the criteria that the modeled paths must fall within 5% of the observations to be considered successful, we found that EarthSHAB successfully predicted the Cloudskimmer ascent rate and average float altitude 10% and 90% of the time, respectively. We also found that the average difference in the observed and predicted landing locations was 97 km and landing times were 54 ± 38 min. Significant deviations between the observed and predicted ascent rates and excursions at float were found to be associated with heavy payloads and convective cloud development, respectively. Significance Statement Solar balloons are used to lift scientific instruments into the lower stratosphere for hours at a time to study chemical explosions, earthquakes, stratospheric aerosols, and more. The flight paths of solar balloons can be difficult to predict due to variability in their design and surrounding environment. We evaluate the accuracy of EarthSHAB, a software that predicts the altitude profile and horizontal trajectory of a solar balloon using inputs such as the weather, balloon size, and balloon mass. Our results suggest that for the balloon design used in this study, EarthSHAB is best suited for modeling the behavior of balloons with lightweight payloads that do not fly within or directly above clouds.

Lien, Jessica M. [Sandia National Laboratories, Al↗
DOE OSTI2025

Micro Rain Radar Pro Data at the Argonne Testbed for Multiscale Observational Science obtained during the CROCUS Urban Integrated Field Laboratory

The Micro Rain Radar Pro (MRR-PRO) is a vertically pointing Ka-band Doppler radar designed to capture the fine-scale structure and evolution of precipitation. By recording the full Doppler spectrum at high temporal and spatial resolution, the MRR-PRO provides insight into both hydrometeor fall velocities and precipitation microphysics. From these spectra, key moments—reflectivity, mean Doppler velocity, spectral width, and rainfall rate—are derived and stored alongside the raw spectral data in CF/Radial 1.4-compliant files. Deployed at the Argonne Testbed for Multiscale Observational Studies (ATMOS) since November 2024, the MRR-PRO delivers vertical profiles at 70 m range resolution extending up to 4.5 km above ground level. These observations enable detailed analyses of precipitation type, intensity, and vertical structure, supporting process-level studies of cloud and precipitation dynamics in diverse weather regimes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Development of the Well-to-Wake Life Cycle Assessment Model for Marine Fuels in R&D GREET 2025

The Marine analysis capabilities in the 2025 Research and Development Greenhouse gases, Regulated Emissions, and Energy use in Technologies (R&D GREET) have been updated to incorporate the latest findings from the Fourth International Maritime Organization (IMO) GHG Study.1 To support these updates and enhance user flexibility, the former single marine module used in previous R&D GREET versions has been split into two workbook tabs: The Marine_Fuel tab, which covers the fuel-cycle, and the Marine_Trip tab, which covers the trip-cycle. In the Marine_Fuel tab, fuel cycle results for 39 marine fuels are available—assuming a slow speed diesel engine—and can be seen in Appendix A. However, there are options for changing feedstocks for multiple fuels, ability to view results with or without pilot fuels for fuels such as methanol and ammonia, and carbon capture options. All these combinations make the number of total possible pathways over one hundred. For each pathway, life cycle emission results are divided into feedstock, conversion, and combustion categories, along with pilot fuel supply chain emissions for fuels used in dual fuel engines. In the newly created Marine_Trip tab, users can view the life cycle emissions of using these fuels from a trip perspective. Compared to R&D GREET 2024, 16 new types of vessels are added in R&D GREET 2025. Examples of results assuming the default size for each vessel type are available in Appendix A. Additional information categories on vessels are included such as vessel size, main propulsion type, engine power rating, combustion cycle, etc. based on the Fourth IMO GHG Study. Operational mode of the trip, fuel consumption, and load calculation were updated based on the report. The fuel consumption calculation also incorporates low-load adjustment, speed–power correction, weather correction, and fouling correction factors. Furthermore, fuel consumption in boilers or steam turbines is also added for the first time, besides fuel use in main propulsion engines and auxiliary engines. This effort makes the R&D GREET Marine capabilities more robust than before. Users will be able to estimate fuel consumption more accurately for more diverse choices of vessel categories, vessel sizes, and energy converters.

09 BIOMASS FUELS↗
DOE OSTI2025

Observation and Simulation of Methane Plumes During the Morning Boundary Layer Transition

Abstract Methane (CH 4 ) contributes significantly to global warming. However, accurate identification of CH 4 sources for reducing CH 4 emissions is often hampered by inadequate accuracy and spatiotemporal coverage of CH 4 detection, and lack of accurate CH 4 forward modeling used in top‐down inversion systems. In this study, a field experiment was conducted in Pampa, Texas using two CH 4 sensors (LI‐COR and OGI camera) to detect CH 4 releases. We investigated whether high‐resolution simulations using the Weather Research and Forecasting (WRF) model with greenhouse gases (WRF‐GHG) could accurately simulate the CH 4 plumes in the presence of evolving atmospheric boundary layer from sunrise to noon. CH 4 plumes showed substantial variation in time. At a release rate of ∼17.5 kg hr −1 , the maximum enhancement of CH 4 measured by LI‐COR was 2.6 ppm at sunrise (7:36 a.m.), 250 m from the release location. Within half an hour after sunrise, this enhancement decreased to 0.3–0.4 ppm. The enhancement was 0.2 ppm by 10:00 a.m. and further dropped to less than 0.1 ppm after 11:30 a.m. Due to the low temperature at sunrise, the OGI camera failed to detect the CH 4 plume. The WRF‐GHG large‐eddy simulation (LES) with 32 m grid spacing successfully reproduced these CH 4 enhancements. In situ measurements together with numerical simulations illustrate the impact of the transition from a stable boundary layer in the early morning to a convective boundary layer at noon on the dispersion of CH 4 plumes. Additionally, CH 4 plumes from a cattle farm in Oklahoma are briefly examined using the same modeling approach.

Hu, Xiao‐Ming [Center for Analysis and Prediction ↗
DOE OSTI2026

Idealized simulations of wind farm interactions with intermittent turbulence in stable boundary layer conditions

Stable atmospheric boundary layer conditions typically correspond to weak turbulence levels, but intermittent periods of elevated turbulence can occur during otherwise quiescent conditions. The interaction between intermittent turbulence and wind turbines is not well understood because of sparse observations, as well as the difficulty in realistically resolving small-scale turbulence during strongly stable conditions with numerical simulations. In this study, an explicit filtering and reconstruction approach for large-eddy simulation (LES) is used to simulate weakly and strongly stable conditions, with surface cooling rates of −0.2 and −2.0 K h −1 , respectively. This approach can sustain resolved background turbulence at relatively coarse grid spacing and stronger stratification compared to conventional closures, permitting more realistic intermittent stable boundary layer (SBL) turbulence. The idealized LES capability of the Weather Research and Forecasting model is employed with turbine rotors parameterized using generalized actuator disks to examine (1) how the presence of turbine wakes affects SBL evolution and (2) the effect of intermittent turbulence on power production and wake recovery. Wakes increase mixing and deepen the SBL, with a stronger effect under strongly stable conditions, primarily because the SBL is shallower and closer to the top of the wind turbine rotor layer. Intermittent turbulence does not have a significant impact on mean power generation and wake recovery because the relevant intermittent turbulent structures in this study only affect the bottom half of the rotor disk. Power production is, however, more variable during periods of elevated turbulence, demonstrating the impact of SBL intermittency. This study uses an idealized configuration, focusing on LES model performance and physical understanding, with the goal of informing future simulations of the conditions observed during the American Wake Experiment.

Energy - Wind↗
DOE OSTI2025

Mechanisms of Projected Changes in Thunderstorm Downburst Environments Across the United States

Responses of downdraft convective available potential energy (DCAPE) to global warming were investigated using the Community Earth System Model (CESM2) under a high‐emission scenario through the year 2100. DCAPE is projected to increase by 5%–12% on average in most areas, independently of wind shear. A diagnostic of downdraft buoyancy is introduced to understand the mechanisms of DCAPE responses. Much of the increase in mean DCAPE is temperature‐driven, with additional contributions from changes in relative humidity and downdraft origin heights. However, extreme values increase at much faster rates than can be explained by local warming. In winter, the latitude of significant DCAPE and CAPE shifts poleward by more than 5° due to larger changes in downburst environments within midlatitude cyclones. The projected increase in cold‐season extremes indicates an interaction between weather events and warming trends that increases the potential for downbursts and straight‐line winds in winter.

Williams, Ian N. [Iowa State Univ., Ames, IA (Unit↗
DOE OSTI2024

Evolving Multi-hazard Machine Learning Modeling for Advanced Risk-Informed Infrastructure Resilience Assessment

The socioeconomic impacts of pipeline incidents have escalated over the past three decades, revealing the limitation of traditional risk modeling methods when applied to extensive pipeline networks. This research aims to develop machine learning (ML) models that effectively identify, rank, and predict the diverse hazards and socioeconomic consequences associated with pipeline incidents. Utilizing historical data on pipeline incidents alongside weather and oceanographic data from the 1980s onward, the Houston metropolitan area serves as a testbed for the proposed methodologies. The research segments the combined datasets into three consecutive periods, demonstrating the efficacy of the updated model in predicting future events, particularly concerning precipitation rate data. Despite the challenges posed by a relatively limited dataset, local-level ML modeling offers valuable insights into the spatial and temporal dynamics of multiple hazards that contribute to pipeline incidents. These findings hold significant implications for future research, particularly in understanding and mitigating risks in various locations across the Gulf Coast and other coastal regions.

42 ENGINEERING↗
DOE OSTI2025

Atmospheric wind energization of ocean weather

Ocean weather comprises vortical and straining mesoscale motions, which play fundamentally different roles in the ocean circulation and climate system. Vorticity determines the movement of major ocean currents and gyres. Strain contributes to frontogenesis and the deformation of water masses, driving much of the mixing and vertical transport in the upper ocean. While recent studies have shown that interactions with the atmosphere damp the ocean’s mesoscale vortices O(100) km in size, the effect of winds on straining motions remains unexplored. Here, we derive a theory for wind work on the ocean’s vorticity and strain. Using satellite and model data, we discover that wind damps strain and vorticity at an equal rate globally, and unveil striking asymmetries based on their polarity. Subtropical winds damp oceanic cyclones and energize anticyclones outside strong current regions, while subpolar winds have the opposite effect. A similar pattern emerges for oceanic strain, where subtropical convergent flow is damped along the west-equatorward east-poleward direction and energized along the east-equatorward west-poleward direction. These findings reveal energy pathways through which the atmosphere shapes ocean weather.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Draft Prototype Microreactor Transportation Safety Program

Microreactors are compact reactors capable of producing less than 50 megawatts of electrical energy. Typically, these reactors are factory-fabricated and designed to be easily transportable by truck, rail, vessel, or air. Microreactor designs often assume that the unit can be transported containing either unirradiated or irradiated fuel. The interest in microreactors is driven by several factors, including the need to generate power on at remote locations, at military installations, at facilities such as data centers, and in areas recovering from natural disasters. The U.S. Department of Defense is actively pursuing the microreactor concept to meet the increasing energy demands of military operations that require portable and dense power sources. Commercial vendors are also exploring microreactor concepts. The report Microreactor Transportation Emergency Planning Challenges (Maheras et al. 2024) outlined the emergency planning challenges associated with the transportation of microreactors by road, rail, and by barge/ship. The successful commercial deployment and redeployment of microreactors will also require the development of microreactor transportation safety programs. The elements in these safety programs are not specific to microreactors; however, the transport of microreactors may pose unique challenges in these areas. This report builds on the report Microreactor Transportation Emergency Planning Challenges (Maheras et al. 2024) and develops the elements of a prototype microreactor transportation safety program that describes the elements that should be contained vendor-developed microreactor transportation safety programs, identifying the unique elements associated with microreactor transport. This will provide vendors and their transportation contractors a basis for their transportation planning and will accelerate the commercial deployment and redeployment of microreactors by identifying those issues unique to microreactor transport. The emphasis of this report is on highway transport of microreactors. This is based on a U.S. Nuclear Regulatory Commission transportation package approval strategy of crawl-walk-run, where transport by highway is evaluated first (Coles et al. 2021, 2024, Maheras et al. 2021), then other surface modes (rail and barge/ship), and finally air transport. Evaluation of maritime transport of microreactors was recently initiated (Rigato et al. 2024, Maheras et al. 2025). The report first discusses microreactors in general and microreactor transportation safety program planning assumptions. The report then provides a description of the transportation safety planning process and provides an extensive discussion of the elements of transportation safety programs. Specific elements examined included transportation roles and responsibilities, transportation planning, transportation mode and route selection, carrier selection, transportation packaging, advance notification of shipments, public information and communications, emergency response plans and procedures, inspections, security, safe parking, shipment tracking, weather and road conditions, medical preparedness, training and exercises, and program evaluation. The report then identifies the unique elements of a transportation safety program associated with microreactor transport. These unique elements were in the areas of: the unusual nature of microreactor designs, compensatory measures, increased radiation dose rates in the vicinity of microreactors, transportation package approval versus 10 CFR 50.59, and the use of a risk-informed transportation package approval process.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗