Search NASA⌕ Search

SEARCH · Search NASA

Results for “Welding Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Investigation of Hydrogen Embrittlement Susceptibility of X80 Weld Joints by Thermal Simulation

The objective of this study was to investigate the hydrogen embrittlement (HE) susceptibility and influence mechanism of X80 weld joints. Slow strain rate testing (SSRT) under in situ H-charging, combined with microstructure and fracture analysis, was performed on the base metal (BM), weld metal (WM), thermally simulated fine-grained heat-affected zone (FGHAZ) and coarse-grained heat-affected zone (CGHAZ). Results showed that the WM and simulated HAZ had a greater degree of high local strain distribution than the BM; compared to the CGHAZ, the FGHAZ had lower microhardness and more uniformly distributed stress. SSRT results showed that the weld joint was highly sensitive to HE; the HE index decreased in the following sequence: FGHAZ, WM, CGHAZ and BM. The effect of the microstructure on HE was mainly reflected in microstructure, local stress distribution and microhardness.

36 MATERIALS SCIENCE↗

Quarterly Management Document – FY17, 4th Quarter, Physics-based Creep Simulations of Thick Section Welds in High Temperature and Pressure Applications

During the 4th quarter of FY17 modeling and simulation development of creep in nickel-based alloys was continued with a focus on incorporation of simulated alloy microstructures into the creep model. Additionally, the model was calibrated with experimental creep data from Alloy 617. Experimental data collection also continued with creep tests, stress drop tests and characterization of alloy microstructures.

36 MATERIALS SCIENCE↗

Quarterly Management Document – FY17, 3rd Quarter, Physics-based Creep Simulations of Thick Section Welds in High Temperature and Pressure Applications

Progress on modeling the the creep of thick sections welds in Alloy 740H is reported. Climb of dislocations during creep has been added to the model. Creep testing is continuing and stress drop testing has been initiated to determine the threshold stress of this particle-strengthened alloy. Work has also begun on generating synthetic microstructures, representative of experimental microstructures, from data collected with EBSD. This will enable incorporation of experimental microstructures into the modeling and simulation effort.

36 MATERIALS SCIENCE↗

Quarterly Management Document – FY19, 3rd Quarter, Physics-based Creep Simulations of Thick Section Welds in High Temperature and Pressure Applications

During the 3rd quarter of FY19, a strategy was developed to incorporate creep damage arising from diffusional processes into a computational model describing creep behavior of thick section welds in Alloy 740H. This approach will be followed in the 4th quarter modify the existing creep model to include diffusional damage processes in its predictions of creep behavior and especially the transition to tertiary creep behavior which will allow the prediction of creep rupture time.

36 MATERIALS SCIENCE↗

Weld fracture criteria for computer simulation

Due to the complexity of welding, not all of the important factors are always properly considered and controlled. An automatic system is required. This report outlines a simulation method and all the important considerations to do this. As in many situations where a defect or failure has occurrred, it is freqently necessary to trouble shoot the system and eventually identify those factors that were neglected. This is expensive and time consuming. Very frequently the causes are materials-related that might have been anticipated. Computer simulation can automatically consider all important variables. The major goal of this presentation is to identify the proper relationship to design, processing and materials variables to welding.

Jemian, Wartan A.↗

Quarterly Management Document – FY19, 4th Quarter, Physics-based Creep Simulations of Thick Section Welds in High Temperature and Pressure Applications

During the 4th quarter of FY19, diffusional creep effects, based on the local stress tensor, was incorporated into the modeling and simulation efforts on thick section welds of Alloy 740H. The model is now complete and addresses both dislocation-based creep as well as diffusional creep mechanisms. Preliminary result indicate the model is now capable of predicting a transition from secondary creep to tertiary creep. Calibration of the model using experimental creep data remains to be performed and will be done in the first quarter of FY20.

36 MATERIALS SCIENCE↗

Quarterly Management Document - FY18, 4th Quarter, Physics-based Creep Simulations of Thick Section Welds in High Temperature and Pressure Applications

During the 4th Quarter of FY18, work on this project focused on determination of the growth behavior of gamma prime precipitates with the intent of determining the growth rate constant as a function of temperature. The derived constitutive equation will be incorporated into the modeling and simulation effort for creep behavior of thick section welds in Alloy 740H for fossil energy power generation applications. Additionally, progress has been made on representing the weld and base metal microstructure using Dream3D which will be used by the modeling and simulation effort to incorporate microstructural effects into the creep behavior.

36 MATERIALS SCIENCE↗

Quarterly Management Document – FY16, 4th Quarter, Physics-based Creep Simulations of Thick Section Welds in High Temperature and Pressure Applications

During the 4th quarter of FY16 welds in Alloy 740H were made and charactrerized. Also, cross weld creep specimens were made and creep tests were initiated in support of the creep modeling and simulation effort. Also, aging of weld material for future characterization was initiated. The creep model was evolved to describe the vacancy concentration that enables the climb of dislocations during power law creep.

36 MATERIALS SCIENCE↗

FEAA90: Physics-based Creep Simulation of Thick Section Welds in High Temperature and Pressure Applications

Welded microstructures of ?’-strengthened, nickel-based alloy, 740H, contain significant microstructural heterogeneities that can have a strong influence on the dislocation dynamics, resulting in very different creep behavior compared to the base metal. Crystal plasticity-based finite element method (CPFEM) has been widely used to incorporate the effect of microstructural heterogeneities on deformation at the polycrystalline scale and is being utilized in this work to model the creep behavior of 740H GTA welds. Current model development is focused on secondary creep considering dislocation climb, glide, and, anti-phase boundary shearing or Orowan looping. A dislocation-density based CPFEM model addressing these mechanisms is currently being implemented in the Multi-Physics Object Oriented Simulation Environment (MOOSE: mooseframework.org) software that provides the ability to solve problems involving multiple physics concurrently and implicitly. Short term creep tests at 700-800°C of cross weld and all-weld metal samples from GTA welds in Alloy 740 will be used to determine input parameters for the model. Long term creep tests at 750°C on Alloy 740H GTA welds will be used to validate the results of modeling and simulation. The model will also be applied to welds with microstructures that develop during hybrid laser arc welding (HLAW) of Alloy 740H to evaluate the effect of weld microstructure on of the validity of the model.

20 FOSSIL-FUELED POWER PLANTS↗

Remove Welding Residual Stress for CFETR Vacuum Vessel by Trailing Ultrasonic Impact Treatment

The China fusion engineering test reactor (CFETR) vacuum vessel is welded by narrow gap TIG (NG-TIG) welding, and the welding residual stress of the CFETR vacuum vessel can be redistributed by trailing welding ultrasonic impact treatment. In order to investigate the feasibility of the residual stress removing scheme, and to obtain the optimal trailing ultrasonic impact treatment technological parameters in the process of removing welding residual stress, a welding model that similar to vacuum vessel welding seam is established by using ABAQUS software, a NG-TIG welding heat source subroutine which is written in FORTRAN language used to simulate NG-TIG welding. According to the welding simulation results, a trailing welding ultrasonic impact treatment model is established, and the effects of the impact pin number, the impact method, the impact pin diameter and the impact frequency on welding residual stress are studied. The results show that the longitudinal residual stress in welding seam and its adjacent area and the lateral residual stress in the whole region have been obviously decreased by different trailing welding ultrasonic impact processes, and have made the tensile stress in the welding seam and its adjacent area has been changed into compressive stress, which can provide theoretical guidance and reference for actual production.

36 MATERIALS SCIENCE↗

Microstructural Evolution and Toughness of the Various HAZs in 1300-MPa-Grade Ultrahigh-Strength Structural Steel

The effect of heat input on the microstructure and toughness of simulated subregions was investigated by welding thermal simulations and Charpy impact tests. The results indicate that the microstructures of the simulated coarse and fine grain heat affected zone (CGHAZ and FGHAZ) gradually changed from lath martensite to a mixture of lath martensite/lath bainite and finally to granular bainite with the increase in heat input. The microstructure of the simulated intercritical heat affected zone (ICHAZ) was mainly composed of granular bainite and blocky martensite regardless of heat input. When the heat input increased, the toughness of the simulated CGHAZ and ICHAZ continuously decreased. Nevertheless, the simulated FGHAZ still displayed good toughness (53.16 J) due to its fine structure. The occurrence of martensite-austenite (M-A) constituents was the main reason for the decrease in crack initiation energy of the simulated CGHAZ and ICHAZ at high values of heat input, and the toughness deteriorated as the size of M-A constituents increased. It should be noted that high-misorientation packet and block boundaries can effectively deviate or arrest the propagation of microcracks. When the heat input was in the approximate range of 8.63-14.95 kJ cm{sup −1}, all of the simulated subregions exhibited good toughness.

36 MATERIALS SCIENCE↗

A new smoothed particle hydrodynamics non-Newtonian model for friction stir welding: Process modeling and simulation of microstructure evolution in a magnesium alloy

We present a new smoothed particle hydrodynamics (SPH) model for friction stir welding (FSW). FSW has broad commercial application in the marine, aerospace, rail, and automotive industries. However, development of the FSW process for each new application has remained largely empirical. Few established numerical modeling techniques have been developed that can explain and predict important features of the process physics involved in FSW. This is particularly true in the areas of material flow and mixing mechanisms. In this paper, we present a novel modeling approach to simulate FSW that may have significant advantages over current finite element or finite difference based methods. Unlike traditional grid-based methods, Lagrangian particle methods such as SPH can simulate the dynamics of interfaces, large material deformations, and the material’s strain and temperature history without employing complex tracking schemes. Three-dimensional simulations of FSW on AZ31 Mg alloy are performed. The temperature history and distribution, grain size, microhardness as well as the texture evolution are presented. Numerical results are found to be in good agreement with experimental observations.

Pan, Wenxiao↗

Welding Defect Classification from Simulated Ultrasonic Signals

Nondestructive testing is widely used to detect and to size up discontinuities embedded in a material. Among the several ultrasonic techniques, time of flight diffraction (TOFD) combines high speed inspection, high sizing reliability and low rate of incorrect results. However, the classification of defects through ultrasound signals acquired by the TOFD technique depends heavily on the knowledge and experience of the operator and thus, this classification is still frequently questioned. Besides, this task requires long processing time due to the large amount of data to be analyzed. Nevertheless, computational tools for pattern recognition can be employed to analyze a high amount of data with large efficiency. In the present work, simulation of ultrasound propagation in two-dimensional media containing, each one, different kinds of modeled discontinuities which mimic defects in welded joints were performed. Clustering (k-means) and classification (principal component analysis and k-nearest neighbors) algorithms were employed to associate each simulated ultrasound signal with its corresponding modeled defects. The results for each method were analyzed, discussed and compared. The results are very promising.

42 ENGINEERING↗

Numerical simulation of linear fiction welding (LFW) processes

Solid state welding processes are becoming increasingly important due to a large number of advantages related to joining ''unweldable'' materials and in particular light weight alloys. Linear friction welding (LFW) has been used successfully to bond non-axisymmetric components of a range of materials including titanium alloys, steels, aluminum alloys, nickel, copper, and also dissimilar material combinations. The technique is useful in the research of quality of the joints and in reducing costs of components and parts of the aeronautic and automotive industries.LFW involves parts to be welded through the relative reciprocating motion of two components under an axial force. In such process the heat source is given by the frictional forces work decaying into heat determining a local softening of the material and proper bonding conditions due to both the temperature increase and the local pressure of the two edges to be welded. This paper is a comparative test between the numerical model in two dimensions, i.e. in plane strain conditions, and in three dimensions of a LFW process of AISI1045 steel specimens. It must be observed that the 3D model assures a faithful simulation of the actual threedimensional material flow, even if the two-dimensional simulation computational times are very short, a few hours instead of several ones as the 3D model. The obtained results were compared with experimental values found out in the scientific literature.

36 MATERIALS SCIENCE↗

Quarterly Management Document – FY20, 2nd Quarter, Physics-based Creep Simulations of Thick Section Welds in High Temperature and Pressure Applications

During the 2nd quarter of FY20, calibration of the creep model was made using experimental creep data on base metal at temperatures between 700-800 C. The model simulated primary and secondary creep behavior at these temperatures but tended to over estimate creep strain in the tertiary regime at 700 C while underestimating it at higher temperatures. Additional issues were also discovered and will be looked at in greater detail in the 3rd quarter of FY20.

36 MATERIALS SCIENCE↗

Thermal Recovery of Plastic Deformation in Dissimilar Metal Weld

Stainless steel has been widely used in challenging environments typical to nuclear power plant structures, due its excellent corrosion resistance. Nickel filler metals containing high chromium concentration, including Alloy 82/182, are used for joining stainless steel to carbon steel components to achieve similar high resistance to stress corrosion cracking. However, the joint usually experience weld metal stress corrosion cracking (SCC), which affects the safety and structural integrity of light water nuclear reactor systems. A primary driving force for SCC is the high tensile residual stress in these welds. Due to large dimension of pressure vessel and limitations in the field, non-destructive residual stress measurement is difficult. As a result, finite element modeling has been the de facto method to evaluate the weld residual stresses. Recent studies on this subject from researchers worldwide report different residual stress value in the weldments [5]. The discrepancy is due to the fact that most of investigations ignore or underestimate the thermal recovery in the heat-affect zone or reheated region in the weld. In this paper, the effect of heat treatment on thermal recovery and microhardness is investigated for materials used in dissimilar metal joint. It is found that high equivalent plastic strains are predominately accumulated in the buttering layer, the root pass, and the heat affected zone, which experience multiple welding thermal cycles. The final cap passes, experiencing only one or two welding thermal cycles, exhibit less plastic strain accumulation. Moreover, the experimental residual plastic strains are compared with those predicted using an existing weld thermo-mechanical model with two different strain hardening rules. The importance of considering the dynamic strain hardening recovery due to high temperature exposure in welding is discussed for the accurate simulation of weld residual stresses and plastic strains. In conclsuion, the experimental result reveals that the typical post-buttering heat treatment for residual stress relief may not be adequate to completely eliminate the residual plastic strains in the buttering layer.

36 MATERIALS SCIENCE↗