Search NASA⌕ Search

SEARCH · Search NASA

Results for “XPS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

XPS post-mortem analysis of plasma-facing units extracted from WEST after the C3 (2018) and C4 (2019) campaigns

Four monoblocks coming from one ITER-like plasma-facing unit from the Q3B sector of the lower divertor, named as monoblock (MB)3, MB9, MB20, and MB30, were exposed to the deuterium and helium plasma mixture during the C3 (2018) and C4 (2019) campaigns of the Tungsten Environment in Steady-state Tokamak (WEST), followed by a detailed ex-situ X-ray photoelectron spectroscopy investigation. The surface and in-depth chemistry of the tungsten monoblocks indicated the formation of a re-deposited mixture in the deposition-dominated area of the divertor, thicker than 218 and 172 nm for MB3 and MB9, respectively. The redeposition layer was dominated by a mixture of boron carbides accompanied by tungsten carbides in MB3, while in MB9, the redeposition layer was dominated by tungsten borides. The remaining two monoblocks, MB20 and MB30, were collected from the erosion region and showed similar chemical behavior with a blended mixture of oxidized and metallic tungsten followed by boron carbides within a 50 nm depth range. Boron fixation in the layers is an expected consequence of the boronizations used during the operation, but the chemical status of redeposited elements was characterized for the first time in this work.

Marin, Alexandru [Pennsylvania State University]↗
DOE OSTI2025

First-Principles-Based Study of the Decomposition of Phenol and Hydroquinone on Pt(111) Combined with Quantitative Information from XPS Spectra to Address the Impact of Coverage and Number of Hydroxyl Functional Groups

A combined first-principles-based and experimental X-ray photoelectron spectroscopy approach was used to investigate the thermal decomposition of two model biofuel compounds, phenol and hydroquinone, on Pt(111) at both low and high coverages. The DFT-based approach yields adsorption geometries and energies, activation barriers and core-level binding energy shifts for C 1s and O 1s. Increasing the coverage in the theoretical model leads to slight shifts in core-level binding energies─toward higher values for C 1s and lower values for O 1s. It also alters the energy profiles of the decomposition reaction pathway, resulting in weaker adsorption energies and changes in both reaction and activation barriers. At low temperatures, we observe a multilayer for phenol and hydroquinone upon adsorption, with desorption occurring at 200 and 270 K, respectively. Following desorption of the multilayer, decomposition proceeds via initial O–H bond scission, followed by two parallel pathways involving either C–H or C–C bond scission, whereby in the case of phenol C–H bond scission occurs first. Here, we further provide characteristic core level binding energies by theoretical calculations that are subsequently used in experimental analyses, establishing a reference database for key spectra of phenolic functionalities applicable to a range of catalytic reactions.

09 BIOMASS FUELS↗
DOE OSTI2024

Study of CO 2 Adsorption Properties on the SrTiO 3 (001) Surface with Ambient Pressure XPS

The adsorption properties of CO 2 on the SrTiO 3 (001) surface were investigated using ambient pressure X-ray photoelectron spectroscopy under elevated pressure and temperature conditions. On the Nb-doped TiO 2 -enriched (1 × 1) SrTiO 3 surface, CO 2 adsorption, i.e., the formation of CO 3 surface species, occurs first at the oxygen lattice site under 10 –6 mbar CO 2 at room temperature. The interaction of CO 2 molecules with oxygen vacancies begins when the CO 2 pressure increases to 0.25 mbar. The adsorbed CO 3 species on the Nb-doped SrTiO 3 surface increases continuously as the pressure increases but starts to leave the surface as the surface temperature increases, which occurs at approximately 373 K on the defect-free surface. On the undoped TiO 2 -enriched (1 × 1) SrTiO 3 surface, CO 2 adsorption also occurs first at the lattice oxygen sites. Both the doped and undoped SrTiO 3 surfaces exhibit an enhancement of the CO 3 species with the presence of oxygen vacancies, thus indicating the important role of oxygen vacancies in CO 2 dissociation. When OH species are removed from the undoped SrTiO 3 surface, the CO 3 species begin to form under 10 –6 mbar at 573 K, thus indicating the critical role of OH in preventing CO 2 adsorption. The observed CO 2 adsorption properties of the various SrTiO 3 surfaces provide valuable information for designing SrTiO 3 -based CO 2 catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Enhancing the accuracy of XPS calculations: Exploring hybrid basis set schemes for CVS-EOMIP-CCSD calculations

Reliable computational methodologies and basis sets for modeling x-ray spectra are essential for extracting and interpreting electronic and structural information from experimental x-ray spectra. In particular, the trade-off between numerical accuracy and computational cost due to the size of the basis set is a major challenge, since molecular orbitals undergo extreme relaxation in the core-hole state. To gain clarity on the changes in electronic structure induced by the formation of a core-hole, the use of sufficiently flexible basis for expanding the orbitals, particularly for the core region, has been shown to be essential. This work focuses on the refinement of core-hole ionized state calculations using the equation-of-motion coupled cluster family of methods through an extensive analysis on the effectiveness of “hybrid” and mixed basis sets. In this investigation, we utilize the CVS-EOMIP-CCSD method in combination and construct hybrid basis sets piecewise from readily available Dunning’s correlation consistent basis sets in order to calculate x-ray ionization energies (IEs) for a set of small gas phase molecules. Our results provide insights into the impact of basis sets on the CVS-EOMIP-CCSD calculations of K-edge IEs of first-row p-block elements. Furthermore, these insights enable us to understand more about the basis set dependence of the core IEs computed and allow us to establish a protocol for deriving reliable and cost-effective theoretical estimates for computing IEs of small molecules containing such elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

In situ ambient pressure XPS study of Pt/Cu(111) single-atom alloy in catalytically relevant reaction conditions

The presence of multiple reactant gases as well as reaction intermediates in a heterogeneous catalytic reaction results in a complex interaction between different components of the catalyst with each gas, which can alter the surface and chemical state of the catalyst differently than in the presence of an individual gas alone. In this study, we used in situ ambient pressure x-ray photoelectron spectroscopy to study the surface state of Pt/Cu(111) single-atom alloy model system in two catalytically relevant reaction conditions: CO 2 hydrogenation and CO oxidation. We found that the activation of CO 2 results in the formation of CO, which adsorbs on Pt sites at up to 400 K. In the presence of CO 2 and H 2 , Pt catalyzes the reverse water–gas shift reaction, which produces more CO and further stabilizes surface Pt atoms at 450 K. On the other hand, in CO oxidation condition, the presence of O 2 results in the formation of a thick Cu 2 O layer at higher temperatures, and Pt atoms are no longer detected in the surface and subsurface layers. When O 2 is introduced to the sample before CO, the formation of a complete Cu 2 O layer that covers all Pt atoms occurs immediately at room temperature. Finally, however, when CO is introduced at room temperature before O 2 , the presence of adsorbed CO on Pt sites stabilizes the surface Pt atoms and prevents the formation of a complete Cu 2 O layer, thus exposing the Pt atoms in 'holes' in the Cu 2 O layer.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Mesoscale variations of the chemical and electronic landscape on the surface of the Weyl semimetal Co 3 ⁢Sn 2⁢ S 2 visualized by ARPES and XPS

The multiple crystalline terminations in magnetic Weyl semimetal Co 3 Sn 2 S 2 display distinct topological and trivial surface states, which have successfully been distinguished experimentally. However, a model of pure terminations is known to be inadequate because these surfaces exhibit a high degree of spatial heterogeneity and point disorder. Here, in this study, we perform a spectromicroscopy study of the surface chemistry and surface electronic structure using photoemission measurements in combination with first-principles calculations of core levels. We identify an intermediate region with properties distinct from both the sulfur and tin terminations, and demonstrate that the spectral features in this region can be associated with a disordered termination with a varying density of surface tin vacancies. This work establishes heuristics for identifying variable surface disorder using photoemission, an important prerequisite to experimentally establishing the behavior of momentum-space topological surface features subject to variable surface disorder on a single cleave.

Sreedhar, Sudheer Anand [Univ. of California, Davi↗
DOE OSTI2023

Hydrogen and Deuterium Reactivity with Carbon Surface Impurities on the TPBAR Getter Ni Plate Studied in situ with Environmental XPS

Tritium for the U.S. Department of Energy’s Tritium Readiness Program is produced in tritium-producing burnable absorber rods (TPBARs) inserted into light-water nuclear reactors. The rods are stainless-steel-clad tubes with a permeation barrier coating and internal components. The internal components have been designed and selected to produce and retain tritium. The TPBAR incorporates a Ni-plated Zircaloy-4 getter tube to capture tritium and prevent it from reaching the rod cladding and permeating into the environment. The role of the Ni coating is to protect the Zircaloy-4 getter from oxidation while allowing for maximum tritium permeability. Ubiquitous surface impurities on the Ni, such as carbon, could limit its protective functionality and permeability if they exist in relatively large concentrations. The reactivity of impurity carbon with permeating tritium can also result in tritiated hydrocarbon impurities on the gas phase. The goal of this work is to determine quantitatively the chemical state and reactivity of potential Ni coating impurities in actual TPBAR getter samples. Using Environmental X-ray Photoelectron Spectroscopy (eXPS), a very sensitive gas/surface chemistry diagnostic, we reveal in situ the source and evolution of carbon on the Ni surface at different hydrogen and deuterium pressure conditions, and how carbon reactivity may result in hydrocarbon gas-evolution at application-relevant temperatures.

36 MATERIALS SCIENCE↗