Search NASA⌕ Search

SEARCH · Search NASA

Results for “Zirconia”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Reconstructing Oxygen-Deficient Zirconia with Ruthenium Catalyst on Atomic-Scale Interfaces toward Hydrogen Production

Downsizing a catalyst nanoparticle (NP) to a single atom (SA) has proven to be highly effective in increasing catalytic activity and decreasing the amount of catalyst required for various electrochemical reactions. However, insufficient stability of the single-atom site catalysts (SACs) is still a significant challenge for their practical application. Here, SACs firmly bound to stable metal oxide NPs are proposed to dramatically increase the electrochemical activity and stability of SA-based catalysts for hydrogen evolution reaction (HER). Starting from a Ru-infiltrated, Zr-based metal-organic framework (MOF), the tetragonal zirconium oxide (ZrO 2-x ) NPs-embedded carbon matrix is fabricated as support through facile pyrolysis. Simultaneously, Ru SAs as active sites are well dispersed on the surface of ZrO 2-x NPs due to the generation of oxygen vacancies in the tetragonal ZrO 2-x . Finally, the Ru-ZrO 2-x SAC exhibits a 4–5 times higher mass activity than commercial Pt and Ru catalysts and superior durability due to strong metal-support interaction (SMSI) between Ru atoms and ZrO 2-x substrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Selective dehydra-decyclization of cyclic ethers to conjugated dienes over zirconia

ZrO 2 provides high selectivity (>90%) to conjugated pentadienes through the dehydra-decyclization of C-5 cyclic ethers, even at high conversions. 1,3-Pentadiene was the major product in both reaction of 2-methyltetrahydrofuran and tetrahydropyran over ZrO 2 . The reaction of 3-methyltetrahydrofuran produced nearly stoichiometric amounts of isoprene. Other catalysts, including TiO 2 , γ-Al 2 O 3 , and H-ZSM-5, were generally much less selective and produced a mixture of diene isomers. A combination of TPD and steady-state measurements revealed that both piperylenes are exclusively produced through primary catalytic pathways from 2-methyltetrahydrofuran, avoiding any isomerization once formed. First-principle calculations on ZrO 2 imply the presence of an energetically favored, surface isomerization of ring-opened intermediates to conjugated alkenolates that selectively dehydrate to conjugated dienes, providing high selectivity to the desired products. Finally, the stabilization of the conjugated alkenolate is key for understanding the ability of ZrO 2 to selectively produce conjugated dienes from cyclic ethers, without the need for the thermo-limited diene isomerization.

1,3 -pentadiene↗
DOE OSTI2024

3D Ferroelectric Phase Field Simulations of Polycrystalline Multi‐Phase Hafnia and Zirconia Based Ultra‐Thin Films

Abstract HfO 2 – and ZrO 2 –based ferroelectric thin films have emerged as promising candidates for the gate oxides of next‐generation electronic devices. Recent work has experimentally demonstrated that a tetragonal/orthorhombic (t/o‐) phase mixture with partially in‐plane polarization can lead to negative capacitance (NC) stabilization. However, there is a discrepancy between experiments and the theoretical understanding of domain formation and domain wall motion in these multi‐phase, polycrystalline materials. Furthermore, the effect of anisotropic domain wall coupling on NC has not been studied so far. Here, 3D phase field simulations of HfO 2 – and ZrO 2 –based mixed‐phase ultra‐thin films on silicon are applied to understand the necessary and beneficial conditions for NC stabilization. It is found that smaller ferroelectric grains and a larger angle of the polar axis with respect to the out‐of‐plane direction enhances the NC effect. Furthermore, it is shown that theoretically predicted negative domain wall coupling even along only one axis prevents NC stabilization. Therefore, it is concluded that topological domain walls play a critical role in experimentally observed NC phenomena in HfO 2 – and ZrO 2 –based ferroelectrics.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2020

Ultrahigh temperature in situ transmission electron microscopy based bicrystal coble creep in zirconia I: Nanowire growth and interfacial diffusivity

This study demonstrates novel in situ transmission electron microscopy-based microscale single grain boundary Coble creep experiments used to grow nanowires through a solid-state process in cubic ZrO 2 between ≈ 1200 °C and ≈ 2100 °C. Experiments indicate Coble creep drives the formation of nanowires from asperity contacts during tensile displacement, which is confirmed by phase field simulations. The experiments also facilitate efficient measurement of grain boundary diffusivity and surface diffusivity. 10 mol% Sc 2 O 3 doped ZrO 2 is found to have a cation grain boundary diffusivity of $D_{gb} = (0.056 ± 0.05)exp (\frac{-380,000±41,000}{RT})m^2 s^{-1}$, and $D_s = (0.10 ± 0.27)exp(\frac{-380,000 ± 28,000}{RT}) m^2 s^{-1}$.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ultrahigh temperature in situ transmission electron microscopy based bicrystal coble creep in Zirconia II: Interfacial thermodynamics and transport mechanisms

This work uses a combination of stress dependent single grain boundary Coble creep and zero-creep experiments to measure interfacial energies, along with grain boundary point defect formation and migration volumes in cubic ZrO 2 . These data, along with interfacial diffusivities measured in a companion paper are then applied to analyzing two-particle sintering. The analysis presented here indicates that the large activation volume, v * = v f + v m primarily derives from a large migration volume and suggests that the grain boundary rate limiting defects are delocalized, possibly due to electrostatic interactions between charge compensating defects. The discrete nature of the sintering and creep process observed in the small-scale experiments supports the hypothesis that grain boundary dislocations serve as sources and sinks for grain boundary point defects and facilitate strain during sintering and Coble creep. Model two-particle sintering experiments demonstrate that initial-stage densification follows interface reaction rate-limited kinetics.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Anisotropic structure and optical engineering of strontium titanate and zirconia responding to sequential hydrogen and helium irradiation

Unraveling the correlation between strain engineering with anisotropic optical properties via nanoscale defects gradually evolved into a strategy for fundamental studies and technological applications, yet it remains understudied in functional complex oxides compared to metals and semiconductors. Here, the methodology of strain engineering for the determination of the lattice parameters, parallel/normal to the sample surface, in the individual layers of single-crystalline superlattices is derived, which is based on analysis of high-angle X-ray diffraction measurements in combination with diffraction reciprocal space mapping. With modeling that takes into account the effect of elastic properties, two elastically anisotropic materials, SrTiO 3 and ZrO 2 , have been compared in terms of defect-induced elastic strain caused by individual and sequential H + and He 2+ irradiation. The anisotropic lattice swelling with corresponding refractive index, and obstructive behavior of elastic strain recovery are demonstrated in SrTiO 3 , while approaching strain behaviors accompanied by isotropic refractive index distribution in both orientations are confirmed in ZrO 2 . Under sequential He 2+ /H + irradiation, pre-existing He-vacancy complexes acted as vacancy traps, preferentially capturing H + clusters to induce lattice distortion and enhance absorption. Nanohardness increments (ΔH) calculated by the DBH model matched nanoindentation results, confirming that sequential irradiation generated higher indentation yield stress than individual irradiations.

Anisotropic expansion↗
DOE OSTI2020

Locally developed electronic conduction in a yttria stabilized zirconia (YSZ) electrolyte for durable solid oxide fuel cells

In the present work, anode supported solid oxide fuel cells (SOFCs) based on a YSZ single layer electrolyte with locally developed electronic conduction near the anode side is fabricated to improve the cell durability under negative voltage conditions. A ceria added Ni/YSZ anode functional layer is utilized and co-sintered with the YSZ electrolyte at 1460 °C. Cerium ions are diffused into a limited region of the YSZ layer (~6 μm), establishing a ceria doped YSZ region. We successfully demonstrate that this YSZ single layer cell can operate stably for ~100 h without anode/electrolyte interface delamination, even under a negative voltage. The embedded probe technique and theoretical calculation reveal that the internal oxygen partial pressure (near the anode) is substantially reduced (stabilized) by means of local electronic conduction of ceria doped YSZ. Thus, we propose an SOFC electrolyte design comprising a YSZ single layer with a ceria added anode functional layer (locally formed ceria doped YSZ in the electrolyte) as a protection method against fuel cell stack degradation caused by negative voltage operation.

25 ENERGY STORAGE↗
DOE OSTI2021

Reaction paths of methane activation and oxidation of surface intermediates over NiO on Ceria-Zirconia catalysts studied by In-situ FTIR spectroscopy

Methane activation over NiO/Ce 0.82 Zr 0.18 O 2 catalysts synthesized by combustion synthesis is studied by in-situ IR spectroscopy and correlated to the properties and oxygen speciation of the catalyst. Through XRD, H 2 -TPR, and pyridine adsorption followed by FTIR spectroscopy, the reducibility and Lewis acidity of the catalysts are assessed. In-situ FTIR spectroscopy is used to monitor the methane activation on catalyst surfaces. Complex IR features of methane-derived surface species are observed and are attributed to the formation of surface alkyl/alkoxy, aldehyde, formate/carbonate, and aromatic species. A data analysis algorithm is developed to evaluate the evolution of different surface species over time. The formation of formate and carbonate species is driven by adsorbed surface oxygen, while less reactive oxygen species associated with NiO allow for the production of aromatics and alkoxy intermediates. Finally, by tuning the reducibility and Lewis acidity of the catalyst, the selectivity to alkoxy intermediates can be improved.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗