SEARCH · Search NASA
Results for “acceptor states”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Asymmetric Alkoxy and Alkyl Substitution on Nonfullerene Acceptors Enabling High‐Performance Organic Solar Cells
Abstract In this paper, a strategy of asymmetric alkyl and alkoxy substitution is applied to state‐of‐the‐art Y‐series nonfullerene acceptors (NFAs), and it achieves great performance in organic solar cell (OSC) devices. Since alkoxy groups can have a significant influence on the material properties of NFAs, alkoxy substitution is applied to the Y6 molecule in a symmetric manner. The resulting molecule (named Y6‐2O), despite showing improved open‐circuit voltage ( V oc ), yields extremely poor performance due to low solubility and excessive aggregation properties, a change that is due to the conformational locking effect of alkoxy groups. In contrast, asymmetric alkyl and alkoxy substitution on Y6, yields a molecule named Y6‐1O that can maintain the positive effect of V oc improvement and obtain reasonably good solubility. The resulting molecule Y6‐1O enables highly efficient nonfullerene OSCs with 17.6% efficiency and the asymmetric side‐chain strategy has the potential to be applied to other NFA‐material systems to further improve their performance.
Vibronic exciton model for low bandgap donor–acceptor polymers
In this study, a vibronic exciton model is introduced to describe the excited state band structure and associated absorption spectra of low bandgap donor–acceptor conjugated polymers. The Hamiltonian is represented in a diabatic basis consisting of Frenkel-like donor and acceptor fragment excitations as well as charge-transfer (CT) excitations between neighboring fragments. States are coupled to each other through electron and hole transfer as well as Coulombically, through interacting fragment transition dipole moments. Local vibronic coupling involving the prominent aromatic-quinoidal vibrational mode, which is responsible for pronounced vibronic progressions in most conjugated oligomers and polymers, is also included. The DAD repeat unit is shown to behave like a J-aggregate trimer, driven by both the sizable in-phase electron and hole transfer integrals between donor and acceptor fragments as well as negative Coulomb coupling between donor and acceptor fragment excitations. The J-aggregate behavior is enhanced in the polymer limit through inter-repeat unit coupling, with the 0–0 vibronic peak significantly enhanced in the lowest-energy near-IR band. In addition, the radiative rate is enhanced by the number of coherently connected repeat units. The near-IR band is shown to possess roughly equal admixtures of CT and Frenkel-like excitations. Applications are made to the polymer PffBT4T-2DT, with the simulated absorption spectrum quantitatively capturing the salient features of the measured spectrum.
The Role of Demixing and Crystallization Kinetics on the Stability of Non‐Fullerene Organic Solar Cells
Abstract With power conversion efficiency now over 17%, a long operational lifetime is essential for the successful application of organic solar cells. However, most non‐fullerene acceptors can crystallize and destroy devices, yet the fundamental underlying thermodynamic and kinetic aspects of acceptor crystallization have received limited attention. Here, room‐temperature (RT) diffusion coefficients of 3.4 × 10 −23 and 2.0 × 10 −22 are measured for ITIC‐2Cl and ITIC‐2F, two state‐of‐the‐art non‐fullerene acceptors. The low coefficients are enough to provide for kinetic stabilization of the morphology against demixing at RT. Additionally profound differences in crystallization characteristics are discovered between ITIC‐2F and ITIC‐2Cl. The differences as observed by secondary‐ion mass spectrometry, differential scanning calorimetry (DSC), grazing‐incidence wide‐angle X‐ray scattering, and microscopy can be related directly to device degradation and are attributed to the significantly different nucleation and growth rates, with a difference in the growth rate of a factor of 12 at RT. ITIC‐4F and ITIC‐4Cl exhibit similar characteristics. The results reveal the importance of diffusion coefficients and melting enthalpies in controlling the growth rates, and that differences in halogenation can drastically change crystallization kinetics and device stability. It is furthermore delineated how low nucleation density and large growth rates can be inferred from DSC and microscopy experiments which could be used to guide molecular design for stability.
Identifying the Signatures of Intermolecular Interactions in Blends of PM6 with Y6 and N4 Using Absorption Spectroscopy
Abstract In organic solar cells, the resulting device efficiency depends strongly on the local morphology and intermolecular interactions of the blend film. Optical spectroscopy was used to identify the spectral signatures of interacting chromophores in blend films of the donor polymer PM6 with two state‐of‐the‐art nonfullerene acceptors, Y6 and N4, which differ merely in the branching point of the side chain. From temperature‐dependent absorption and luminescence spectroscopy in solution, it is inferred that both acceptor materials form two types of aggregates that differ in their interaction energy. Y6 forms an aggregate with a predominant J‐type character in solution, while for N4 molecules the interaction is predominantly in a H‐like manner in solution and freshly spin‐cast film, yet the molecules reorient with respect to each other with time or thermal annealing to adopt a more J‐type interaction. The different aggregation behavior of the acceptor materials is also reflected in the blend films and accounts for the different solar cell efficiencies reported with the two blends.
Random Polymerization Strategy Leads to a Family of Donor Polymers Enabling Well‐Controlled Morphology and Multiple Cases of High‐Performance Organic Solar Cells
Abstract Developing high‐performance donor polymers is important for nonfullerene organic solar cells (NF‐OSCs), as state‐of‐the‐art nonfullerene acceptors can only perform well if they are coupled with a matching donor with suitable energy levels. However, there are very limited choices of donor polymers for NF‐OSCs, and the most commonly used ones are polymers named PM6 and PM7, which suffer from several problems. First, the performance of these polymers (particularly PM7) relies on precise control of their molecular weights. Also, their optimal morphology is extremely sensitive to any structural modification. In this work, a family of donor polymers is developed based on a random polymerization strategy. These polymers can achieve well‐controlled morphology and high‐performance with a variety of chemical structures and molecular weights. The polymer donors are D–A1–D–A2‐type random copolymers in which the D and A1 units are monomers originating from PM6 or PM7, while the A2 unit comprises an electron‐deficient core flanked by two thiophene rings with branched alkyl chains. Consequently, multiple cases of highly efficient NF‐OSCs are achieved with efficiencies between 16.0% and 17.1%. As the electron‐deficient cores can be changed to many other structural units, the strategy can easily expand the choices of high‐performance donor polymers for NF‐OSCs.
Charge-Transfer Luminescence in a Molecular Donor–Acceptor Complex: Computational Insights
Donor–acceptor molecular complexes are a popular class of materials utilizing charge-transfer states for practical applications. A recent class of donor–acceptor dyads based on the fluorescent BODIPY functionalized with triphenylamine (TPA) shows the peculiar property of dual fluorescence. It is hypothesized that instead of the sensitized charge-transfer state being optically dark, it provides an additional bright radiative pathway. In this study, we use time-dependent density functional theory to characterize the energetic alignment of excitonic and charge-transfer states in a BODIPY-TPA molecular complex. We observe that using a long-range exchange corrected functional in combination with state-specific solvation scheme gives a qualitatively correct alignment of the exciton and charge-transfer states and an enhancement in oscillator strength for the equilibrium solvated charge-transfer state, in agreement with experiment. Furthermore, this work provides rationalization of charge-transfer state emission and provides a foundation to explore charge-transfer using ab initio excited-state nonadiabatic dynamics.
Magic Angle Spinning Solid-State 13 C Photochemically Induced Dynamic Nuclear Polarization by a Synthetic Donor–Chromophore–Acceptor System at 9.4 T
Not Available
Predicting Dexter Energy Transfer Interactions from Molecular Orbital Overlaps
Dexter energy transfer (DET), also known as spin forbidden energy transfer (e.g., 3 D 1 A → 1 D 3 A), is undergoing renewed interest because of its utility in energy science, photocatalysis, and biomedical imaging. The DET reactions enable exciton fission and fusion and have been recently used to facilitate nanoscale imaging of protein assemblies on cell surfaces. While DET and Förster energy transfer rates are often well described using Fermi’s golden rule, the donor–acceptor couplings for DET may be bridge-state-mediated and depend on the electronic structure of and interactions among the donor, bridge, and acceptor. We provide a simple approach to approximate DET couplings using a product of molecular orbital overlap factors. This approach may be used to guide the design of DET systems with targeted energy-transfer kinetics.
Optimizing spectral and morphological match of nonfullerene acceptors toward efficient indoor organic photovoltaics with enhanced light source adaptability
High-performance indoor organic photovoltaics (IOPV) require large-bandgap material systems to absorb visible light efficiently and reduce energy loss. However, state-of-the-art non-fullerene acceptors (NFAs) have absorptions in the near-infrared region and are thus not suitable for IOPV applications. Herein, we report a series of large-bandgap (>1.70 eV) NFAs named FCC-Cl-C8, FCC-Cl-4Ph and FCC-Cl-6Ph by modifying the alkyl side chains with alkylphenyl chains partially or completely. Results show that the bulky alkylphenyl side chains can finely tune the absorption properties of the NFAs and also affect their morphological properties. Interestingly, the best-performing NFA is the one (named FCC-Cl-4Ph) with partial alkyl and alkylphenyl substitutions, which blue-shift the absorption of the NFAs while minimizing the negative morphological effect of the bulky alkylphenyl chains. As a result, FCC-Cl-4Ph can achieve excellent indoor efficiencies over 29% under a 3000 K LED lamp at 1000 lux and show better solution processability over FCC-Cl-C8. More importantly, FCC-Cl-4Ph can maintain high indoor performance (29.7–26.8% at 1000 lux) under a wide range of indoor lighting spectra (2600, 3000, 4000, and 6500 K LED lamps), which should be due to the blue-shifted spectra of FCC-Cl-4Ph and better matching with various indoor conditions. Finally, this work reveals an interesting structure-property relationship and offers useful strategies for the further design of NFAs toward efficient IOPV devices.
Tunable structural, morphological and optical properties of undoped, Mn, Ni and Ag-doped CuInS 2 thin films prepared by AACVD
The preparation of high-quality copper indium sulphide, CuInS 2 photo-absorber material with tunable properties for efficient, low-cost, thin film solar cells using scalable methods remains a challenge. In order to address this, high quality off-stoichiometric undoped and Mn, Ni and Ag-doped CuInS 2 (CIS) thin films have been deposited onto glass substrates by aerosol-assisted chemical vapour deposition (AACVD) using metal diethyldithiocarbamate precursors at temperatures of 350, 400 and 450 °C. Data from powder X-ray diffraction (p-XRD), Raman spectroscopy and scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS) suggest a correlation of morphology and composition of tetragonal phase (chalcopyrite and copper-gold-type) sulphur-deficient microcrystalline CIS thin films. For undoped thin films, near-infrared optical absorption and emission with tunable band gap between 1.32 and 1.42 eV are likely associated with donor-acceptor pairs involving deep or shallow electronic states such as sulphur vacancies (V S •• ), indium-copper anti-sites (In Cu •• ) and indium interstitials (In i ••• ) as donors and copper vacancies (V Cu ') as acceptors. Whilst Mn-doped thin films exhibit minimal tunable properties, Ni and Ag-doped films exhibit tunable morphology, composition and near-infrared absorption for small dopant content. Here, though further studies are required to explore the defect chemistry, these results show the utility of AACVD in tuning structural, morphological and optical properties of undoped, Mn, Ni and Ag-doped CIS thin films.
Low Temperature Aggregation Transitions in N3 and Y6 Acceptors Enable Double‐Annealing Method That Yields Hierarchical Morphology and Superior Efficiency in Nonfullerene Organic Solar Cells
Abstract Thermal transition of organic solar cells (OSCs) constituent materials are often insufficiently researched, resulting in trial‐and‐error rather than rational approaches to annealing strategies to improve domain purity to enhance the power conversion efficiency. Despite the potential utility, little is known about the thermal transitions of the modern high‐performance acceptors Y6 and N3. Here, by using an optical method, it is discovered that the acceptor N3 has a clear solid‐state aggregation transition at 82 °C. This unusually low transition not only explains prior optimization protocols, but the transition informs and enables a double‐annealing method that can fine‐tune aggregation and the device morphology. Compared with 16.6% efficiency for PM6:N3:PC 71 BM control devices, higher efficiency of 17.6% is obtained through the improved protocol. Morphology characterization with x‐ray scattering methods reveals the formation of a multilength scale morphology. Moreover, the double‐annealing method is illustrated and easily transferred and validated with Y6‐based devices, using the transition of Y6 at 102 °C. As a result, the PCE improved from 16.0% to 16.8%. Design of high‐performance acceptors with yet lower aggregation transitions might be required for OSCs to successfully transition to low thermal budget industrial processing methods where annealing temperatures on plastic substrates have to be kept low.
Arsenic activation and compensation in single crystal CdTe bilayers
In state-of-the art polycrystalline CdTe photovoltaics, group-V dopant activation is about 2%. Low activation can create electronic defects and lead to recombination and band tail losses. To develop methods to overcome this limitation, dopant activation was systematically investigated using molecular beam epitaxy (MBE) grown single crystal bilayers of As-doped CdTe on undoped CdTe. Results suggest multiple paths for improved As-activation in polycrystalline CdTe-based devices. It was found that the carrier concentration in this MBE material saturated at ∼3 × 1016 cm−3, with high levels (>50%) of As-activation possible. High activation could be achieved with a post-growth activation temperature of ∼450 °C, when the initial doping level was below the saturation level. However, at typical polycrystalline As incorporation levels (>5 × 1016 cm−3), the excess As is inactive or compensating, requiring elevated temperatures (500–600 °C) to achieve high activation. Oxygen in the annealing ambient was detrimental, while the effect of CdCl2 in the ambient is more case-dependent. A 575 °C activation anneal was combined with a 450 °C CdCl2 treatment to better understand the implications for polycrystalline CdTe. Interestingly, on highly doped samples, processes ending with a high temperature step displayed high activation, while those ending at 450 °C significantly reduced the carrier concentration (with or without CdCl2 in the ambient). Low activation can be restored with another high temperature anneal, allowing reproducible toggling between high and low activation based on the final temperature. Photoluminescence revealed the presence of donor–acceptor pairs in the low activation state that appear to be associated with a compensating defect.
Heterogeneous Nucleating Agent for High‐Boiling‐Point Nonhalogenated Solvent‐Processed Organic Solar Cells and Modules
Abstract High‐boiling‐point nonhalogenated solvents are superior solvents to produce large‐area organic solar cells (OSCs) in industry because of their wide processing window and low toxicity; while, these solvents with slow evaporation kinetics will lead excessive aggregation of state‐of‐the‐art small molecule acceptors (e.g. L8‐BO), delivering serious efficiency losses. Here, a heterogeneous nucleating agent strategy is developed by grafting oligo (ethylene glycol) side‐chains on L8‐BO (BTO‐BO). The formation energy of the obtained BTO‐BO; while, changing from liquid in a solvent to a crystalline phase, is lower than that of L8‐BO irrespective of the solvent type. When BTO‐BO is added as the third component into the active layer (e.g. PM6:L8‐BO), it easily assembles to form numerous seed crystals, which serve as nucleation sites to trigger heterogeneous nucleation and increase nucleation density of L8‐BO through strong hydrogen bonding interactions even in high‐boiling‐point nonhalogenated solvents. Therefore, it can effectively suppress excessive aggregation during growth, achieving ideal phase‐separation active layer with small domain sizes and high crystallinity. The resultant toluene‐processed OSCs exhibit a record power conversion efficiency (PCE) of 19.42% (certificated 19.12%) with excellent operational stability. The strategy also has superior advantages in large‐scale devices, showing a 15.03‐cm 2 module with a record PCE of 16.35% (certificated 15.97%).
Reorganization Energies for Interfacial Proton-Coupled Electron Transfer to a Water Oxidation Catalyst
The reorganization energy (λ) for interfacial electron transfer (ET) and proton-coupled electron transfer (PCET) from a conductive metal oxide (In 2 O 3 :Sn, ITO) to a surface-bound water oxidation catalyst were extracted from kinetic data measured as a function of the thermodynamic driving force. Visible light excitation resulted in rapid excited-state injection (k inj > 10 8 s -1 ) to the ITO, which photo-initiated the two interfacial reactions of interest. The rate constants for both reactions increased with the driving force, −ΔG°, to a saturating limit, k max , with rate constants consistently larger for ET than for PCET. Marcus-Gerischer analysis of the kinetic data provided the reorganization energy for interfacial PCET (0.90 ± 0.02 eV) and ET (0.40 ± 0.02 eV), respectively. The magnitude of k max for PCET was found to decrease with pH, behavior that was absent for ET. Both the decrease in k max and the larger reorganization energy for an unwanted competing PCET reaction from the ITO to the oxidized catalyst showcases a significant kinetic advantage for driving solar water oxidation at high pH. Computational analysis revealed a larger inner-sphere reorganization energy contribution for PCET than for ET arising from a more significant change in the Ru–O bond length for PCET. Extending Marcus-Gerischer theory to PCET by including the excited electron-proton vibronic states and the proton donor-acceptor motion provided an apparent reorganization energy of 1.01 eV. Furthermore, this study demonstrates that the Marcus-Gerischer theory initially developed for ET can be reliably extended to PCET for quantifying and interpreting reorganization energies observed experimentally.
Atomic structure of light-induced efficiency-degrading defects in boron-doped Czochralski silicon solar cells
Boron-doped Czochralski (Cz) Si is the most commonly used semiconductor in the fabrication of solar cells. The minority carrier lifetime of boron-doped Cz Si decreases upon exposure to light due to B–O-related defects, which reduce the performance of ~10 9 solar modules worldwide. Using electron paramagnetic resonance (EPR), we have identified the spin-active paramagnetic signatures of this phenomenon and gained insights into its microscopic mechanism. We found a distinct defect signature, which diminished when the degraded sample was annealed. The second signature, a broad magnetic field spectrum, due to the unionized B acceptors, was present in the annealed state but vanished upon light exposure. These observations show that, on degradation, nearly all the ~10 16 cm –3 B atoms in Cz Si complexed with interstitial O atoms, whereas only ~10 12 cm –3 of these complexes created defects that were recombination-active. The formation rate of these recombination-active defects correlated with the decay of the minority carrier lifetime. Furthermore, the line shape parameters linked these defects to both B and O impurities in Cz Si.
Electron Transfer Beyond the Outer Membrane: Putting Electrons to Rest
Extracellular electron transfer (EET) is the physiological process that enables the reduction or oxidation of molecules and minerals beyond the surface of a microbial cell. The first bacteria characterized with this capability were Shewanella and Geobacter, both reported to couple their growth to the reduction of iron or manganese oxide minerals located extracellularly. A key difference between EET and nearly every other respiratory activity on Earth is the need to transfer electrons beyond the cell membrane. The past decade has resolved how well-conserved strategies conduct electrons from the inner membrane to the outer surface. However, recent data suggest a much wider and less well understood collection of mechanisms enabling electron transfer to distant acceptors. This review reflects the current state of knowledge from Shewanella and Geobacter, specifically focusing on transfer across the outer membrane and beyond—an activity that enables reduction of highly variable minerals, electrodes, and even other organisms.
Determination of Vibrational Motions Driving Photoinduced Electron Transfer Reactions in Molecular Crystals and Organic Thin Films
The objective of this research is to develop an understanding of how nuclear motions can be used to drive and control photo-induced charge transfer and singlet fission reactions in molecular crystals and thin films. By following the structural evolution of reacting molecules and nanostructures on the timescale of their nuclear motion, we will determine what interplay of nuclear coordinates is most efficient in driving electron transfers, a necessary first step in most photovoltaic and photocatalytic processes. We will identify which nuclear coordinates effectively promote desirable electron transfer processes, or ineffectively dissipate photon energy into unwanted thermal energy, thus guiding the design and implementation of molecular systems tailored for high efficiency processes. Specifically, we aim to identify which nuclear coordinates are responsible for driving electron transfer and singlet fission reactions at different points along the reaction coordinate, particularly in regimes which deviate from Marcus theory predictions. We will do so by investigating systems with electron transfer and singlet fission occurring from non-thermalized states due to strong donor-acceptor electronic coupling. First, we will prove that specific vibrational modes are responsible for charge transfer processes in molecular crystals. Secondly, we will investigate how vibrational coherences and specific nuclear motions can be used to drive high yield singlet fission processes. Finally, we will determine how complex film morphology affects long-range charge transport, a key limiting factor in our ability to make gains in efficiency.