SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Using calorimetry and ab initio simulations, we uncover atomic-level details of the loading/separation process of C 2 hydrocarbons in UiO-66.
The functionalisation of organic linkers in metal–organic frameworks (MOFs) to improve gas uptake is well-documented. Although the positive role of free carboxylic acid sites in MOFs for binding gas molecules has been proposed in computational studies, relatively little experimental evidence has been reported in support of this. Primarily this is because of the inherent synthetic difficulty to prepare MOF materials bearing free, accessible –COOH moieties which would normally bind to metal ions within the framework structure. Here, we describe the direct binding of CO 2 and C 2 H 2 molecules to the free –COOH sites within the pores of MFM-303(Al). MFM-303(Al) exhibits highly selective adsorption of CO 2 and C 2 H 2 with a high selectivity for C 2 H 2 over C 2 H 4 . In situ synchrotron X-ray diffraction and inelastic neutron scattering, coupled with modelling, highlight the cooperative interactions of adsorbed CO 2 and C 2 H 2 molecules with free –COOH and –OH sites within MFM-303(Al), thus rationalising the observed high selectivity for gas separation.
Here, the requirement for C 2 H 2 concentrations below 2 parts per million (ppm) in gas streams for C 2 H 4 polymerization necessitates its semihydrogenation to C 2 H 4 . Here, we demonstrate selective chemical looping combustion of C 2 H 2 in C 2 H 4 -rich streams by Bi 2 O 3 as an alternative catalytic pathway to reduce C 2 H 2 concentration below 2 ppm. Bi 2 O 3 combusts C 2 H 2 with a first-order rate constant that is 3000 times greater than the rate constant for C 2 H 4 combustion. In successive redox cycles, the lattice O of Bi 2 O 3 can be fully replenished without discernible changes in local Bi coordination or C 2 H 2 combustion selectivity. Heterolytic activation of C–H bonds across Bi–O sites and the higher acidity of C 2 H 2 results in lower barriers for C 2 H 2 activation than C 2 H 4 , enabling selective catalytic hydrocarbon combustion leveraging differences in molecular deprotonation energies.
DOE Office of Electricity TRAC Peer Review, Virtual, February 1-3, 2022
SPIE DCS, Virtual, April 3-4, 2022
TRAC Program Peer Review Meeting, ORNL, June 27-28, 2023.
The design and realization of highly selective nanoporous materials are necessary to target critical separations across industries. By leveraging pore size, pore shape, and linker functionalization, the design of nanoporous solid adsorbents will enable the rapid production of energy efficient separation materials for high-value gas mixtures. This study uses a combination of modeling, synthesis, and gas adsorption testing to investigate a new class of small-pore isostructural rare-earth (RE) 2,5-dihydroxyterephthalic acid (DOBDC) metal–organic frameworks (MOFs) (RE: Pr-, Gd-, Er-, Yb; DOBDC = 2,5-dihydroxyterephthalic acid) and their adsorption selectivity for acetylene/ethylene mixtures. Density functional theory simulations identified that selective binding of acetylene over ethylene in the Gd-, Er-, and Yb-DOBDC MOFs was due to hydrogen-bonding between acetylene and the linker hydroxyl. Adsorption experiments validated the computational results by identifying mechanisms that control the acetylene/ethylene adsorption selectivity and high acetylene adsorption. Furthermore, dynamic column breakthrough experiments with the Gd-DOBDC MOF validated the simulations and indicated that ethylene can be separated from acetylene in a mixture containing 1 vol % acetylene and 39 vol % ethylene (balance argon). In conclusion, the results highlight the complexity of gas binding in functional porous materials and how combining modeling and experiment enables a fundamental understanding of gas–framework interactions that can be leveraged for the design of future separation materials.
Electronic excitation and concomitant energy transfer leading to Penning ionization in argon–acetylene clusters generated in a supersonic expansion are investigated with synchrotron-based photoionization mass spectrometry and electronic structure calculations. Spectral features in the photoionization efficiency of the mixed argon–acetylene clusters reveal a blue shift from the 2 P 1/2 and 2 P 3/2 excited states of atomic argon. Analysis of this feature suggests that excited states of argon clusters transfer energy to acetylene, resulting in its ionization and successive evaporation of argon. Theoretically calculated Ar n (n = 2–6) cluster spectra are in excellent agreement with experimental observations, and provide insight into the structure and ionization dynamics of the clusters. A comparison between argon–acetylene and argon–water clusters reveals that argon solvates water better, allowing for higher-order excitons and Rydberg states to be populated. Furthermore, these results are explained by theoretical calculations of respective binding energies and structures.
Abstract Copper compounds have been extensively investigated for diverse applications. However, studies of cuprous hydroxide (CuOH) have been scarce due to structural metastability. Herein, a facile, wet‐chemistry procedure is reported for the preparation of stable CuOH nanostructures via deliberate functionalization with select organic ligands, such as acetylene and mercapto derivatives. The resulting nanostructures are found to exhibit a nanoribbon morphology consisting of small nanocrystals embedded within a largely amorphous nanosheet‐like scaffold. The acetylene derivatives are found to anchor onto the CuOH forming CuC linkages, whereas CuS interfacial bonds are formed with the mercapto ligands. Effective electronic coupling occurs at the ligand‐core interface in the former, in contrast to mostly non‐conjugated interfacial bonds in the latter, as manifested in spectroscopic measurements and confirmed in theoretical studies based on first principles calculations. Notably, the acetylene‐capped CuOH nanostructures exhibit markedly enhanced photodynamic activity in the inhibition of bacteria growth, as compared to the mercapto‐capped counterparts due to a reduced material bandgap and effective photocatalytic generation of reactive oxygen species. Results from this study demonstrate that deliberate structural engineering with select organic ligands is an effective strategy in the stabilization and functionalization of CuOH nanostructures, a critical first step in exploring their diverse applications.
Single pulse shock tube experiments were conducted at 50 atm nominal pressure and 4 ms nominal reaction time over a temperature range of 900–1800 K, to study the pyrolysis speciation of a multi-component jet fuel, F-24, and six cetane number (CN) specialty fuels - CN30, CN35, CN40, CN45, CN50, and CN55. Gas chromatography (GC) was used to qualitatively and quantitatively analyze the post shock gases. The relationship between the formation of key pyrolysis species and the chemically controlled combustion propensity as reflected by the cetane number of each fuel was examined. A surrogate-based mechanism from the CRECK Modelling Group and chemical-functional group based optimized surrogates (CFGO) were used to simulate the pyrolysis speciation results. The model was able to capture the chemistry of most species except two important pyrolysis intermediates – ethylene and acetylene. Chemical kinetic analyses were performed to identify the important reactions which affect the chemistry of these species; however, the rate parameters of critical reactions were found to be unsuitable for simulating the present high-pressure studies. Here, to address this unsuitability, a theory-based fall-off analysis for three reactions representing the decomposition of ethylene and subsequent formation of acetylene was performed, and these are included in an updated version of the CRECK mechanism. This update resolves discrepancies between the experimental results and simulations for ethylene and acetylene. Reaction flux analyses using the updated surrogate model were also performed to identify the important reaction pathways responsible for the formation of crucial species and to provide an analysis of the chemistry of complex multi-component fuel systems. The fundamental reactions responsible for driving pyrolysis chemistry were greatly influenced by the chemical functional groups present in these fuels. In addition to updating the rate parameters of specific reactions to improve modeling, this study also emphasizes the effectiveness of the fuel-surrogate approach, where surrogates representing the chemical functional group composition of the parent fuel serve as a valuable tool for predicting the combustion chemistry of novel fuels.
The regions of the C 13 H 11 potential energy surface (PES) related to the unimolecular isomerization and decomposition of the 1-methylbiphenylyl radical and accessed by the 1-/2-methylnaphthyl + C 2 H 2 reactions have been explored by ab initio G3(MP2,CC)//B3LYP/6-311G(d,p) calculations. The kinetics of these reactions relevant to the growth of polycyclic aromatic hydrocarbons (PAH) under high-temperature conditions in circumstellar envelopes and in combustion flames has been studied employing the RRKM-Master Equation approach. The unimolecular reaction of 1-methylbiphenylyl proceeding via a five-membered ring closure followed by H elimination is predicted to be very fast, on a submicrosecond scale above 1000 K and to result in the formation of an embedded five-membered ring in the 9H-fluorene product. The 1-/2-methylnaphthyl + C 2 H 2 reaction mechanism involves acetylene addition to the radical on the methylene group followed by a six- or five-membered ring closure and aromatization via an H atom loss. Despite of the complexity of the C 13 H 11 PES, these straightforward pathways are dominant in the high-temperature regime (above ~1000 K), with the prevailing products being phenalene, with a significant contribution of 1H-cyclopenta(a)naphthalene, for 1-methylnaphthyl + C 2 H 2 , and 1H-cyclopenta(b)naphthalene and 3H-cyclopenta(a)naphthalene, for 2-methylnaphthyl + C 2 H 2 . The methylnaphthyl reactions with acetylene represent a clean source of the three-ring PAHs, but they are relatively slow owing to the high entrance barriers of ~10 kcal/mol, with the rate constants of about an order of magnitude lower as compared to those for naphthyl + allene and σ-aryl + C 2 H 2 . Here, the 1-methylnaphthyl + C 2 H 2 and 2-methylnaphthyl + C 2 H 2 reactions represent prototypes for PAH growth by an extra six- and five-membered ring on a zigzag edge or a corner of PAH and the generated modified Arrhenius expressions are recommended for kinetic modeling of PAH expansion by the mechanism of acetylene addition to methylaryl radicals.
This project addressed precise measurements of the spectra of molecules to address fundamental questions in chemical physics in the realm of nuclear spin symmetries and their breakdown in molecules, and parity non-conservation caused by the weak nuclear force. Nuclear spin symmetry is intimately connected to parity in symmetrical molecules and plays a central role in the physical and chemical properties of symmetric molecules, their collisional relaxation, and the establishment of thermodynamic equilibrium in an ensemble. Such effects are present in every molecular system or process, but their small size means they are often only directly observable under special conditions. However, their measurement is of fundamental, and often practical importance, and strongly relates to the themes of coherence in light and matter in the recent Basic Energy Sciences Advisory Committee (BESAC) report “Challenges at the Frontiers of Matter and Energy: Transformative Opportunities for Discovery Science”. We begin by addressing lifetime broadening of spectroscopic lines caused by self-collisions in acetylene, where efficient resonant rotational energy transfer between a pair of molecules separated in energy by rotational quantum number ΔJ = ± 2, can result in a different pressure broadening for ortho- and para- nuclear spin state molecules. This work was prompted by a controversial report [Iwakuni et al. Phys. Rev Letts. 117 (2016) 143902] of the observation of such an effect in the v 1 +v 3 combination band transition of acetylene discussed in the original proposal. After delays caused by the COVID-19 pandemic, we have completed these measurements and a paper was published in the Journal of Chemical Physics describing the work. The measurements pointed out that the use of an approximate model in the analysis of the original work was the cause of the erroneous conclusion that ortho and para acetylene molecules had substantially different collisional lifetime broadening. In the process, much improved broadening measurements have been made that will permit more reliable modeling of the effects in the future. Subsequently, we have completed a new set of measurements of self- and nitrogen-collisional broadening at a series of low and intermediate temperatures to characterize the temperature dependence of the effects in the molecule. This work is currently being analyzed and will be the subject of a paper to be published in the relatively near future. In addition, some very preliminary measurements of CH 4 as described in the proposal, have been completed. If facilities and time permit, these will continue as an undergraduate research project.
Industrial purification of propylene and ethylene requires cryogenic distillation and selective hydrogenation over palladium catalysts to remove propane, ethane and/or trace amounts of acetylene. Here, we report the excellent separation of equimolar mixtures of propylene/propane and ethylene/ethane, and of a 1/100 mixture of acetylene/ethylene by a highly robust microporous material, MFM-520, under dynamic conditions. In situ synchrotron single crystal X-ray diffraction, inelastic neutron scattering and analysis of adsorption thermodynamic parameters reveal that a series of synergistic host-guest interactions involving hydrogen bonding and π⋯π stacking interactions underpin the cooperative binding of alkenes within the pore. Notably, the optimal pore geometry of the material enables selective accommodation of acetylene. The practical potential of this porous material has been demonstrated by fabricating mixed-matrix membranes comprising MFM-520, Matrimid and PIM-1, and these exhibit not only a high permeability for propylene (≈1984 Barrer), but also a separation factor of 7.8 for an equimolar mixture of propylene/propane at 298 K.
Herein, the mechanisms and kinetics of the reaction of ortho-benzyne with vinylactylene have been studied by ab initio and density functional CCSD(T)-F12/cc-pVTZ-f12//B3LYP/6-311G(d,p) calculations of the pertinent potential energy surface combined with Rice-Ramsperger-Kassel-Marcus - Master Equation calculations of reaction rate constants at various temperatures and pressures. Under prevailing combustion conditions, the reaction has been shown to predominantly proceed by the biradical acetylenic mechanism initiated by the addition of C4H4 to one of the C atoms of the triple bond in ortho-benzyne by the acetylenic end, with a significant contribution of the concerted addition mechanism. Following the initial reaction steps, an extra six-membered ring is produced and the rearrangement of H atoms in this new ring leads to the formation of naphthalene, which can further dissociate to 1- or 2-naphthyl radicals. The o-C 6 H 4 + C 4 H 4 reaction is highly exothermic, by ~143 kcal/mol to form naphthalene and by 31-32 kcal/mol to produce naphthyl radicals + H, but features relatively high entrance barriers of 9-11 kcal/mol. Although the reaction is rather slow, much slower than the reaction of phenyl radical with vinylacetylene, it forms naphthalene and 1- and 2-naphthyl radicals directly, with their relative yields controlled by the temperature and pressure, and thus represents a viable source of the naphthalene core under conditions where ortho-benzyne and vinylacetylene are available.
In this study, a reliable and compact chemical mechanism of gas-phase methane pyrolysis leading to formation of large polycyclic aromatic hydrocarbon (PAH) molecules has been developed. This model is designed for studies of carbon nanostructure synthesis such as carbon black and graphene flakes, including soot growth kinetics. Methane pyrolysis with carbon nanostructure synthesis is a two-stage process where conversion of CH 4 to C 2 H 2 precedes the growth of PAH molecules from acetylene. We present a single chemical mechanism that accurately describes both stages. We have constructed a compact and accurate chemical mechanism capable of modeling both stages of methane pyrolysis based on the ABF mechanism which was expanded with the most prominent reaction pathways from the mechanism by Tao for small PAH molecules and HACA pathways for larger PAH molecules, up to 37 aromatic rings. The resulting mechanism was validated through comparison to multiple available sets of experimental data. Good agreement with the experimental data for both processes was obtained. Performance of the mechanism was tested for pyrolysis of methane-rich mixtures under long residence times leading to abundant formation of PAH molecules. It is shown that the inclusion of larger PAH species (up to A37) in the chemical mechanism is important for accurate prediction of the fraction of carbon converted to PAH molecules and, correspondingly, the residual fraction of acetylene in the mixture. The mechanism file is available upon request.
The automated kinetics workflow code, KinBot, was used to explore and characterize the regions of the C 7 H 7 potential energy surface that are relevant to combustion environments and especially soot inception. We first explored the lowest-energy region, which includes the benzyl, fulvenallene + H, and cyclopentadienyl + acetylene entry points. We then expanded the model to include two higher-energy entry points, vinylpropargyl + acetylene and vinylacetylene + propargyl. The automated search was able to uncover the pathways from the literature. In addition, three important new routes were discovered: a lower-energy pathway connecting benzyl with vinylcyclopentadienyl, a decomposition mechanism from benzyl that results in side-chain hydrogen atom loss to produce fulvenallene + H, and shorter and lower energy routes to the dimethylene-cyclopentenyl intermediates. We systematically reduced the extended model to a chemically relevant domain composed of 63 wells, 10 bimolecular products, 87 barriers, and 1 barrierless channel and constructed a master equation using the CCSD(T)-F12a/cc-pVTZ//ωB97X-D/6-311++G(d,p) level of theory to provide rate coefficients for chemical modeling. Our calculated rate coefficients show excellent agreement with measured ones. We also simulated concentration profiles and calculated branching fractions from the important entry points to provide an interpretation of this important chemical landscape.
An elucidation of the underlying formation pathways to acyclic hydrocarbons such as polyynes (C n H 2 ), cumulenes (C n H 2 ), and linear resonantly stabilized linear radicals (l-C n H) is indispensable to understand the hydrocarbon chemistry in extreme low and high temperature environments. In this study, we exploited the crossed molecular beam technique to investigate the reaction of tricarbon C 3 (X 1 Σ g + ) with diacetylene (butadiyne; HCCCCH; X 1 Σ g + ) at a collision energy of 47 ± 1 kJ mol ⁻1 . The experimental data were merged with ab initio calculations of the singlet C 7 H 2 potential energy surface (PES) revealing that the reaction is initiated via the formation of an initial van der Waals reactant complex in the entrance channel. Subsequent rearrangements lead to various carbene-type and cyclic intermediates via ring-opening, ring-closure, and hydrogen migration processes eventually forming acyclic C 7 H 2 isomers prior to their barrierless unimolecular decomposition to the most stable linear isomer, heptatriynylidyne (C 7 H, X 2 Π) in an overall endoergic reaction (+57 kJ mol ⁻1 ). The reaction exhibits strong similarities to the tricarbon – acetylene (C 3 – C 2 H 2 ). Furthermore, the significant energy threshold suggests that the tricarbon reaction with (poly)acetylenes forming resonantly stabilized linear radicals are open in high-temperature environments such as combustion flames and circumstellar envelopes of carbon stars and planetary nebulae as their descendants; however, these reactions are closed in low-temperature environments as in cold molecular clouds and hydrocarbon-rich atmospheres of planets and their moons such as in Titan.
To overcome electronic transport issues of layered titanates in sodium-ion batteries, we have designed and synthesized composites of lepidocrocite titanates with reduced graphene oxide through a solution-based self-assembly approach. The parent lepidocrocite titanate (K 0.8 [Ti 1.73 Li 0.27 ]O 4 ) was exfoliated by a soft-chemical approach and mechanical shaking. Exfoliated layered titania sheets (LTO) were then combined with reduced graphene oxide (rGO) layers to assemble into composites through flocculation. Countercations (i.e., Mg 2+ ) were used for the self-assembly of negatively charged titania and rGO nanosheets via flocculation. The carbon content in the composites was tuned from 1 to 17% by changing the ratio of titania and rGO sheets in the mixed colloidal suspensions. Electrodes were processed with as-prepared LTO-rGO composites without any carbon additives and tested in sodium half-cell configurations. Mg + -coagulated LTO-rGO composite electrodes deliver higher capacities than electrodes prepared with coagulated titania sheets and 10% acetylene black in sodium half-cells and display good capacity retention after 50 cycles. Electrochemical impedance spectroscopy results indicate lower charge transfer resistance for LTO-14.5%rGO composites than that of coagulated titania sheets with 10% acetylene black. A power law analysis of cells containing the composites indicate a hybrid mechanism consisting of both surface and diffusional processes. A comparison with a similar system, that of dopamine-derived LTO-C heterostructures, reveal significant differences. While capacities showed a strong dependence on carbon content for the dopamine-derived materials, this was not true for the LTO-rGO composites. Instead, the highest capacity was obtained for the 14.5% rGO sample, with a lower value obtained for the 17% rGO sample. A greater proportion of the redox processes were surface rather than diffusional in nature for the LTO-rGO composites as well.