Search NASA⌕ Search

SEARCH · Search NASA

Results for “active insulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Thermal transport in yttrium iron garnet at very high magnetic fields

The ferrimagnetic insulator yttrium iron garnet (YIG) is one of the most important materials in the active fields of insulator-based spintronics and spin caloritronics. Nevertheless, and despite the fact that this material has been studied for over six decades, the thermal properties of magnons in YIG have not been sufficiently characterized, mainly because at not very low temperatures they are overwhelmed by the contribution of phonons. Here, we report measurements of the thermal conductivity in YIG under magnetic fields up to 31.4 T to increase the magnon energy gap, to suppress the magnon contribution, and to isolate that of the phonons relative to theirbehavior at zero field. We observe that at a temperature of 20 K, even with a field as large as 31.4 T, the magnon contribution is not completely suppressed. In conclusion, the magnon thermal conductivity, measured by subtracting the value of the total thermal conductivity at 31.4 T from the value at zero field, has a peak at 16 K, with an amplitude thatis over five times larger than the one obtained by measuring under a field of only 7 T, as previously reported.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancement of phosphorus activation in vacancy engineered thin silicon-on-insulator substrates

The concentration of vacancy-type defects in a silicon-on-insulator substrate consisting of a 110 nm silicon overlayer and a 200 nm buried oxide has been quantified using variable energy positron annihilation spectroscopy following 300 keV Si{sup +} ion implantation to a dose of 1.5x10{sup 15} cm{sup -2} and subsequent annealing at temperatures ranging from 300 to 700 deg. C. The preferential creation of vacancies (relative to interstitials) in the silicon overlayer leads to a net vacancy-type defect concentration after annealing. Assuming that the defects have a structure close to that of the divacancy we determine the concentration to range from 1.7x10{sup 19} to 5x10{sup 18} cm{sup -3} for annealing temperatures ranging from 300 to 700 deg. C. The measured defect concentration is in excellent agreement with that predicted via Monte Carlo simulation. The impact of this net vacancy population on the diffusion and activation of phosphorus introduced by a 2 keV implantation to a dose of 1x10{sup 15} cm{sup -2} has been observed. For samples that combine both Si{sup +} and P{sup +} implantations, postimplantation phosphorus diffusion is markedly decreased relative to that for P{sup +} implantation only. Further, a fourfold increase in the electrical activation of phosphorus after postimplantation annealing at 750 deg. C is observed when both implantations of Si{sup +} and P{sup +} are performed. We ascribe this affect to the reduction in phosphorus-interstitial clusters by the excess vacancy concentration beyond the amorphous/crystalline interface created by the P{sup +} implantation.

36 MATERIALS SCIENCE↗

Mirror symmetry breaking in a model insulating cuprate

Among the most actively studied issues in the cuprates are the natures of the pseudogap and strange metal states and their relationship to superconductivity. There is general agreement that the low-energy physics of the Mott-insulating parent state is well captured by a two-dimensional spin S = 1/2 antiferromagnetic Heisenberg model. However, recent observations of a large thermal Hall conductivity in several parent cuprates appear to defy this simple model and suggest proximity to a magneto-chiral state that breaks all mirror planes that are perpendicular to the CuO 2 layers. Here we use optical second harmonic generation to directly resolve the point group symmetries of the model parent cuprate Sr 2 CuO 2 Cl 2 . We report evidence of an order parameter that breaks all perpendicular mirror planes and is consistent with a magneto-chiral state in zero magnetic field. Although this order is clearly coupled to the antiferromagnetism, we are unable to realize its time-reversed partner by thermal cycling through the antiferromagnetic transition temperature or by sampling different spatial locations. Finally, this suggests that the order onsets above the Neel temperature and may be relevant to the mechanism of pseudogap formation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Phase-field model of coupled insulator-metal transitions and oxygen vacancy redox reactions

A predominant ubiquitous feature of strongly correlated oxides is the possible presence of oxygen vacancies, which has recently been shown to have profound effects on their electronic phase transitions. Here, we formulate a comprehensive phase-field model of intercoupled insulator-metal transitions and oxygen vacancy redox reactions, taking into account the valence electron state of oxygen vacancies. We use the model to study the voltage self-oscillation phenomenon in a prototypical strongly correlated oxide, VO 2 , and discover the mutual activation of the insulator-metal transition and oxygen vacancy redox reactions leading to systematic enhancement of the oscillation frequency. Furthermore, the established methodology and the mutual activation mechanism are generally applicable to understanding any insulator-metal transition dynamics in oxygen-deficient correlated oxides and improving the performance of voltage self-oscillation-based artificial neurons.

36 MATERIALS SCIENCE↗

Quantum oscillation of thermally activated conductivity in a monolayer WTe 2 -like excitonic insulator

Recently, quantum oscillation of the resistance in insulating monolayer WTe 2 was reported. An explanation in terms of gap modulation in the hybridized Landau levels of an excitonic insulator was also proposed by one of us. However, the previous picture of gap modulation in the Landau levels spectrum was built on a pair of well nested electron and hole Fermi surfaces, while the monolayer WTe 2 has one hole and two electron Fermi pockets with relative anisotropy. In this work we demonstrate that for system like monolayer WTe 2 , the excitonic insulating state arising from the coupled one hole and two electron pockets possesses a finite region in interaction parameter space that shows gap modulation in a magnetic field. In this region, the thermally activated conductivity displays the 1/B periodic oscillation and it can further develop into discrete peaks at low temperature, in agreement with the experimental observation. We show that the relative anisotropy of the bands is a key parameter and the quantum oscillations decrease rapidly if the anisotropy increases further than the realistic value for monolayer WTe 2 .

2-dimensional systems↗

Whiskerless Schottky diode

A Schottky diode for millimeter and submillimeter wave applications is comprised of a multi-layered structure including active layers of gallium arsenide on a semi-insulating gallium arsenide substrate with first and second insulating layers of silicon dioxide on the active layers of gallium arsenide. An ohmic contact pad lays on the silicon dioxide layers. An anode is formed in a window which is in and through the silicon dioxide layers. An elongated contact finger extends from the pad to the anode and a trench, preferably a transverse channel or trench of predetermined width, is formed in the active layers of the diode structure under the contact finger. The channel extends through the active layers to or substantially to the interface of the semi-insulating gallium arsenide substrate and the adjacent gallium arsenide layer which constitutes a buffer layer. Such a structure minimizes the effect of the major source of shunt capacitance by interrupting the current path between the conductive layers beneath the anode contact pad and the ohmic contact. Other embodiments of the diode may substitute various insulating or semi-insulating materials for the silicon dioxide, various semi-conductors for the active layers of gallium arsenide, and other materials for the substrate, which may be insulating or semi-insulating.

Bishop, William L.↗

Advanced Turbine Technology Applications Project (ATTAP)

ATTAP activities during the past year were highlighted by an extensive materials assessment, execution of a reference powertrain design, test-bed engine design and development, ceramic component design, materials and component characterization, ceramic component process development and fabrication, component rig design and fabrication, test-bed engine fabrication, and hot gasifier rig and engine testing. Materials assessment activities entailed engine environment evaluation of domestically supplied radial gasifier turbine rotors that were available at the conclusion of the Advanced Gas Turbine (AGT) Technology Development Project as well as an extensive survey of both domestic and foreign ceramic suppliers and Government laboratories performing ceramic materials research applicable to advanced heat engines. A reference powertrain design was executed to reflect the selection of the AGT-5 as the ceramic component test-bed engine for the ATTAP. Test-bed engine development activity focused on upgrading the AGT-5 from a 1038 C (1900 F) metal engine to a durable 1371 C (2500 F) structural ceramic component test-bed engine. Ceramic component design activities included the combustor, gasifier turbine static structure, and gasifier turbine rotor. The materials and component characterization efforts have included the testing and evaluation of several candidate ceramic materials and components being developed for use in the ATTAP. Ceramic component process development and fabrication activities were initiated for the gasifier turbine rotor, gasifier turbine vanes, gasifier turbine scroll, extruded regenerator disks, and thermal insulation. Component rig development activities included combustor, hot gasifier, and regenerator rigs. Test-bed engine fabrication activities consisted of the fabrication of an all-new AGT-5 durability test-bed engine and support of all engine test activities through instrumentation/build/repair. Hot gasifier rig and test-bed engine testing activities were performed.

Source record↗

Advanced Turbine Technology Applications Project (ATTAP)

Advanced Turbine Technology Application Project (ATTAP) activities during the past year were highlighted by test-bed engine design and development activities; ceramic component design; materials and component characterization; ceramic component process development and fabrication; component rig testing; and test-bed engine fabrication and testing. Although substantial technical challenges remain, all areas exhibited progress. Test-bed engine design and development activity included engine mechanical design, power turbine flow-path design and mechanical layout, and engine system integration aimed at upgrading the AGT-5 from a 1038 C metal engine to a durable 1371 C structural ceramic component test-bed engine. ATTAP-defined ceramic and associated ceramic/metal component design activities include: the ceramic combustor body, the ceramic gasifier turbine static structure, the ceramic gasifier turbine rotor, the ceramic/metal power turbine static structure, and the ceramic power turbine rotors. The materials and component characterization efforts included the testing and evaluation of several candidate ceramic materials and components being developed for use in the ATTAP. Ceramic component process development and fabrication activities are being conducted for the gasifier turbine rotor, gasifier turbine vanes, gasifier turbine scroll, extruded regenerator disks, and thermal insulation. Component rig testing activities include the development of the necessary test procedures and conduction of rig testing of the ceramic components and assemblies. Four-hundred hours of hot gasifier rig test time were accumulated with turbine inlet temperatures exceeding 1204 C at 100 percent design gasifier speed. A total of 348.6 test hours were achieved on a single ceramic rotor without failure and a second ceramic rotor was retired in engine-ready condition at 364.9 test hours. Test-bed engine fabrication, testing, and development supported improvements in ceramic component technology that will permit the achievement of program performance and durability goals. The designated durability engine accumulated 359.3 hour of test time, 226.9 of which were on the General Motors gas turbine durability schedule.

Source record↗

Electronic and magnetic properties of the RuX3 (X = Cl, Br, I) family: two siblings—and a cousin?

Abstract Motivated by reports of metallic behavior in the recently synthesized RuI 3 , in contrast to the Mott-insulating nature of the actively discussed α -RuCl 3 , as well as RuBr 3 , we present a detailed comparative analysis of the electronic and magnetic properties of this family of trihalides. Using a combination of first-principles calculations and effective-model considerations, we conclude that RuI 3 , similarly to the other two members, is most probably on the verge of a Mott insulator, but with much smaller magnetic moments and strong magnetic frustration. We predict the ideal pristine crystal of RuI 3 to have a nearly vanishing conventional nearest-neighbor Heisenberg interaction and to be a quantum spin liquid candidate of a possibly different kind than the Kitaev spin liquid. In order to understand the apparent contradiction to the reported resistivity ρ , we analyze the experimental evidence for all three compounds and propose a scenario for the observed metallicity in existing samples of RuI 3 . Furthermore, for the Mott insulator RuBr 3, we obtain a magnetic Hamiltonian of a similar form to that in the much-discussed α -RuCl 3 and show that this Hamiltonian is in agreement with experimental evidence in RuBr 3 .

36 MATERIALS SCIENCE↗

Electronic properties of monolayer tungsten disulfide grown by chemical vapor deposition

We demonstrate chemical vapor deposition of large monolayer tungsten disulfide (WS 2 ) (>200 μm). Photoluminescence and Raman spectroscopy provide insight into the structural and strain heterogeneity of the flakes. We observe exciton quenching at grain boundaries that originate from the nucleation site at the center of the WS 2 flakes. Temperature variable transport measurements of top-gated WS 2 transistors show an apparent metal-to-insulator transition. Variable range and thermally activated hopping mechanisms can explain the carrier transport in the insulating phase at low and intermediate temperatures. The devices exhibit room-temperature field-effect electron mobility as high as 48 cm 2 /V.s. The mobility increases with decreasing temperature and begins to saturate at below 100 °K, possibly due to Coulomb scattering or defects

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Integration of Ag-CBRAM crossbars and Mott ReLU neurons for efficient implementation of deep neural networks in hardware

In-memory computing with emerging non-volatile memory devices (eNVMs) has shown promising results in accelerating matrix-vector multiplications. However, activation function calculations are still being implemented with general processors or large and complex neuron peripheral circuits. Here, we present the integration of Ag-based conductive bridge random access memory (Ag-CBRAM) crossbar arrays with Mott rectified linear unit (ReLU) activation neurons for scalable, energy and area-efficient hardware (HW) implementation of deep neural networks. We develop Ag-CBRAM devices that can achieve a high ON/OFF ratio and multi-level programmability. Compact and energy-efficient Mott ReLU neuron devices implementing ReLU activation function are directly connected to the columns of Ag-CBRAM crossbars to compute the output from the weighted sum current. We implement convolution filters and activations for VGG-16 using our integrated HW and demonstrate the successful generation of feature maps for CIFAR-10 images in HW. Our approach paves a new way toward building a highly compact and energy-efficient eNVMs-based in-memory computing system.

Mott insulators↗

Anomalous thickness-dependent electrical conductivity in van der Waals layered transition metal halide, Nb 3 Cl 8

Understanding the electronic transport properties of layered, van der Waals transition metal halides (TMHs) and chalcogenides is a highly active research topic today. Of particular interest is the evolution of those properties with changing thickness as the 2D limit is approached. Here, we present the electrical conductivity of exfoliated single crystals of the TMH, cluster magnet, Nb 3 Cl 8 , over a wide range of thicknesses both with and without hexagonal boron nitride (hBN) encapsulation. The conductivity is found to increase by more than three orders of magnitude when the thickness is decreased from 280 µm to 5 nm, at 300 K. At low temperatures and below ~50 nm, the conductance becomes thickness independent, implying surface conduction is dominating. Temperature dependent conductivity measurements indicate Nb 3 Cl 8 is an insulator, however, the effective activation energy decreases from a bulk value of 310 meV to 140 meV by 5 nm. X-ray photoelectron spectroscopy (XPS) shows mild surface oxidation in devices without hBN capping, however, no significant difference in transport is observed when compared to the capped devices, implying the thickness dependent transport behavior is intrinsic to the material. A conduction mechanism comprised of a higher conductivity surface channel in parallel with a lower conductivity interlayer channel is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solar Thermal Upper Stage Cryogen System Engineering Checkout Test

The Solar Thermal Upper Stage technology (STUSTD) program is a solar thermal propulsion technology program cooperatively sponsored by a Boeing led team and by NASA MSFC. A key element of its technology program is development of a liquid hydrogen (LH2) storage and supply system which employs multi-layer insulation, liquid acquisition devices, active and passive thermodynamic vent systems, and variable 40W tank heaters to reliably provide near constant pressure H2 to a solar thermal engine in the low-gravity of space operation. The LH2 storage and supply system is designed to operate as a passive, pressure fed supply system at a constant pressure of about 45 psia. During operation of the solar thermal engine over a small portion of the orbit the LH2 storage and supply system propulsively vents through the enjoy at a controlled flowrate. During the long coast portion of the orbit, the LH2 tank is locked up (unvented). Thus, all of the vented H2 flow is used in the engine for thrust and none is wastefully vented overboard. The key to managing the tank pressure and therefore the H2 flow to the engine is to manage and balance the energy flow into the LH2 tank with the MLI and tank heaters with the energy flow out of the LH2 tank through the vented H2 flow. A moderate scale (71 cu ft) LH2 storage and supply system was installed and insulated at the NASA MSFC Test Area 300. The operation of the system is described in this paper. The test program for the LH2 system consisted of two parts: 1) a series of engineering tests to characterize the performance of the various components in the system: and 2) a 30-day simulation of a complete LEO and GEO transfer mission. This paper describes the results of the engineering tests, and correlates these results with analytical models used to design future advanced Solar Orbit Transfer Vehicles.

Olsen, A. D↗

Designer membraneless organelles sequester native factors for control of cell behavior

Subcellular compartmentalization of macromolecules increases flux and prevents inhibitory interactions to control biochemical reactions. Inspired by this functionality, we sought to build designer compartments that function as hubs to regulate the flow of information through cellular control systems. Here we report a synthetic membraneless organelle platform to control endogenous cellular activities through sequestration and insulation of native proteins. We engineer and express a disordered protein scaffold to assemble micron size condensates and recruit endogenous clients via genomic tagging with high-affinity dimerization motifs. By relocalizing up to ninety percent of a targeted enzymes to synthetic condensates, we efficiently control cellular behaviors, including proliferation, division, and cytoskeletal organization. Further, we demonstrate multiple strategies for controlled cargo release from condensates to switch cells between functional states. These synthetic organelles offer a powerful and generalizable approach to modularly control cell decision-making in a variety of model systems with broad applications for cellular engineering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metal insulator semiconductor solar cell devices based on a Cu{sub 2}O substrate utilizing h-BN as an insulating and passivating layer

We demonstrate cuprous oxide (Cu{sub 2}O) based metal insulator semiconductor Schottky (MIS-Schottky) solar cells with efficiency exceeding 3%. A unique direct growth technique is employed in the fabrication, and hexagonal boron nitride (h-BN) serves simultaneously as a passivation and insulation layer on the active Cu{sub 2}O layer. The devices are the most efficient of any Cu{sub 2}O based MIS-Schottky solar cells reported to date.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Barriers for interfacial back-electron transfer: A comparison between TiO 2 and SnO 2 /TiO 2 core/shell structures

Temperature dependent kinetics for back-electron transfer (BET) from electrons in TiO 2 or SnO 2 /TiO 2 core/shell nanoparticles to oxidized donor-bridge-acceptor (D-B-A) sensitizers is reported over a 110° range. Two D-B-A sensitizers (CF 3 -p and CF 3 -x) were utilized that differed only by the nature of the bridging ligand: a xylyl spacer that largely insulated the two redox active centers and a phenyl bridge that promoted strong electronic coupling and an adiabatic electron transfer mechanism. An Arrhenius analysis revealed that the activation energies were significantly larger for the core/shell oxides, E a = 32 ± 4 kJ/mol, compared to TiO 2 alone, E a = 22 ± 6 kJ/mol. The barriers for BET on sensitized TiO 2 were within the same range as previous literature reports, while this study represents the first quantification for SnO 2 /TiO 2 core/shell materials. Two different models were proposed to rationalize the larger barrier for the core/shell materials: (1) a band edge offset model and (2) a low energy trap state model with recombination from the TiO 2 rutile polymorph shell. The latter model was preferred and is in better agreement with the experimental data. The kinetic analysis also afforded the forward and reverse rate constants for the intramolecular equilibrium. In accordance with theoretical predictions and previous research, the absolute value of the free energy change was smaller for the adiabatic equilibrium provided by the phenyl bridge, i.e., |ΔG o ad | <|ΔG o |.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High Current Density Diamond Photoconductive Semiconductor Switches With a Buried, Metallic Conductive Channel

Laterally configured diamond photoconductive semiconductor switches (PCSS) with a buried, metallic p+ current channel are reported. Above bandgap ( λ ≤ 226 nm) optical triggering enables responsivity of over 130 mA/W. The use of low-impurity semi-insulating diamond as an active absorption layer enables fast rise and fall times (~2 ns) and on/off ratios greater than 10 11 . The PCSS excited with a laser energy of 20 nJ per pulse passes a high current density (44 A/cm) under a DC bias of 60 V, thanks to the buried metallic p+ current channel. The reported devices promise high current carrying capacity without the need for filamenting while leveraging the excellent optical, electronic, and thermal properties of diamond.

42 ENGINEERING↗

Solid-state reprogrammable analog resistive devices for electronic neural networks

The fabrication and performance of WO3-based, solid-state, three-terminal device configurations as programmable analog memory elements are reported. These transistorlike device structures exhibit good resistance progammability with a remarkable resolution of a few percent of the resistive strength over a four orders of magnitude dynamic range. The most critical component of these devices is an insulating layer between the active WO3 and the cation donor layer. The progamming characteristics and operation mechanisms of the device are described, and probable reaction mechanisms critical to the device stability are discussed.

Ramesham, R.↗