Search NASA⌕ Search

SEARCH · Search NASA

Results for “aerosol data products”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Performance of low-cost indoor air quality monitors for PM 2.5 and PM 10 from residential sources

Advances in particle sensor design and manufacturing have enabled the development of low-cost air quality monitors (LCMs). Here, the sensors use light scattering to estimate mass concentration and thus require evaluation for aerosols of varied composition and size distribution. We tested the performance of six LCMs designed for home use and having a retail price under US$300 in October 2018. We assessed their performance by comparing their output to reference PM 2.5 and PM 10 measurements from 21 common residential sources and from infiltrated outdoor PM 2.5 . Reference data were obtained by using gravimetric measurements to adjust time-resolved output from an aerosol spectrometer with both electrical mobility and optical particle sensors. Compared by linear regression to reference measurements, LCMs had negative intercepts and slopes of 1–2 for infiltrated outdoor PM 2.5 . Semi-quantitative responses (~50–200% of actual PM 2.5 ) were obtained for varied aerosols including minerals (ultrasonic humidifier, vacuuming, test dust); combustion products (incense, mosquito coil, extinguished candles); microwave popcorn; and cooking involving frying or grilling. LCMs had low or no response to sources for which all mass was in particles smaller than 0.25 μm, including steady candle flames and cooking without frying or grilling. PM 10 data from LCMs was more variable than PM 2.5 .

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Ice Nucleating Particles, Aerosols and Clouds over the Higher Latitude Southern Ocean

Improved understanding of aerosol-cloud-precipitation interactions is a key goal of the DOE-ASR program. Ice Nucleating Particles (INPs) are rare aerosol particles that trigger ice formation in clouds. By doing so they may initiate precipitation in clouds, and this impacts cloud lifetime. Nowhere may the role of INPs be manifested so dramatically as in the Southern Ocean (SO). This vast region was the focus of the DOE-ARM MARCUS (Measurement of Aerosols, Radiation and CloUds over the Southern Oceans) and MICRE (Macquarie Island Cloud and Radiation Experiment) campaigns. In the SO, a deficit of INPs has been a leading hypothesis for why liquid clouds persist, which underlays the bias of global climate models in predicting excess shortwave radiation reaching the ocean surface between 55°S and Antarctica. In this study, we used the 6-month acquisition of INP data on four MARCUS cruises from Hobart, Tasmania, to Antarctica, and the single-location full annual INP cycle observed in MICRE, to gain a holistic, quantitative picture of the INP number concentrations as a function of temperature and their variability over SO latitudes from 43°S to Antarctica. Augmenting initial processing of filter collections of aerosol particles during MARCUS and MICRE, additional freezing studies following thermal treatment (to removes INPs associated with microbes) and peroxide treatment (to remove all organics), as well as ionic chemistry and total organic carbon analysis, were applied to samples to improve time and space resolution, and differentiate marine from terrestrial contributions. We also performed Next Generation Sequencing to determine that bacterial composition can tag periods of enhanced and degraded marine organic INPs and the relative lack of occurrence of land-sourced bio-particles. Through these and other analyses, INP data were categorized into representative source types (e.g., marine versus terrestrially-influenced). The products of our analyses are being used to parameterize ice formation for use in numerical modeling studies to determine if, and when, ocean-derived INPs control the microphysical composition and radiative balance of SO clouds in a manner not presently captured by global models. The specific objectives and approaches proposed were largely accomplished, including: 1) Additional and value-added chemical and biological analyses of archived samples of aerosols were completed to categorize and quantify INP types and concentrations over the SO. 2) Analyses were completed to place INP data in meteorological and aerosol context. 3) Sea spray aerosol INPs were demonstrated to dominate the SO region in all but episodic events. 4) New parameterizations for INP sources relevant to the SO were constructed. 5) Collaborative modeling studies demonstrating the crucial role of INPs in determining cloud radiative and precipitation properties were conducted with MARCUS and MICRE partners. Collaborative publication submissions in this regard ensued within the two year study. This work will advance the science of interactions of aerosols, clouds and precipitation, to improve their representation in regional and global climate models. Results have informed representation of primary ice crystal nucleation, give inference to the role of secondary processes, and improve investigations of aerosol influences on clouds via ice nucleation over SO high latitudes and similar vast ocean regions. Application will improve representation of such interactions for clouds in both regional and global climate models. The data base and analyses methods applied will continue to serve research studies in the future.

58 GEOSCIENCES↗
DOE OSTI2022

Observed Relationships Between Cloud Droplet Effective Radius and Biogenic Gas Concentrations in Summertime Marine Stratocumulus Over the Eastern North Atlantic

Abstract Biogenic gases are a prominent component of the summertime marine boundary layer (MBL) over the Eastern North Atlantic. One of these gases, dimethyl sulfide (DMS), can produce sulfate cloud condensation nuclei (CCN) that, in theory, can brighten clouds through photolysis, and produces a reaction product, methane sulfonic acid (MSA). It is also possible that DMS can interact with sea‐salt or other marine aerosols changing their CCN activation spectrum, which could also modify cloud microphysical structure. Data collected aboard the G1 aircraft during the Aerosol Cloud Experiment Eastern North Atlantic (ACE‐ENA) in well‐mixed and decoupled marine boundary layers (MBLs) were used to examine relationships between the cloud droplet effective radii, , and the concentrations of DMS and MSA in constant cloud liquid water content (LWC) bins. A weak but statistically significant negative correlation was observed between CCN concentration and in most LWC bins, regardless of the source of the CCN, while a weak but statistically significant positive correlation between and DMS was observed. No correlation between the cloud droplet number concentration and DMS was found. The presence of MSA indicated that DMS‐to‐sulfate photolysis was likely occurring, but data sparsity prevented a statistically significant conclusion regarding the relationship between MSA and . Data sparsity in decoupled conditions also prevented statistically significant conclusions. To properly address biogenic gas impacts on cloud microphysics, it is recommended that aircraft data be supplemented by long‐term biogenic gas measurements at the surface in marine locations with appropriate remote and in‐situ cloud sensing capabilities, and the analysis limited to well‐mixed MBL's.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Application of MELCOR for Simulating Molten Salt Reactor Accident Source Terms

Molten Salt Reactor (MSR) systems can be divided into two basic categories: liquid-fueled MSRs in which the fuel is dissolved in the salt, and solid-fueled systems such as the Fluoride-salt-cooled High-temperature Reactor (FHR). The molten salt provides an impediment to fission product release as actinides and many fission products are soluble in molten salt. Nonetheless, under accident conditions, some radionuclides may escape the salt by vaporization and aerosol formation, which may lead to release into the environment. Here, we present recent enhancements to MELCOR to represent the transport of radionuclides in the salt and releases from the salt. Some soluble but volatile radionuclides may vaporize and subsequently condense to aerosol. Insoluble fission products can deposit on structures. Thermochimica, an open-source Gibbs Energy Minimization (GEM) code, has been integrated into MELCOR. With the appropriate thermochemical database, Thermochimica provides the solubility and vapor pressure of species as a function of temperature, pressure, and composition, which are needed to characterize the vaporization rate and the state of the salt with fission products. Since thermochemical databases are still under active development for molten salt systems, thermodynamic data for fission product solubility and vapor pressure may be user specified. This enables preliminary assessments of fission product transport in molten salt systems. In this paper, we discuss modeling of soluble and insoluble fission product releases in a MSR with Thermochimica incorporated into MELCOR. Separate-effects experiments performed as part of the Molten Salt Reactor Experiment in which radioactive aerosol was released are discussed as needed for determining the source term.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2024

Titanium Dioxide Nanomaterial Ink Production Through Laser Ablation Synthesis in Solution for Printed Electronics Applications

Flexible and printed electronics have become increasingly popular as they make possible the production of flexible, low-cost, multifunction devices that are unachievable through traditional manufacturing methods. The printed films are significantly impacted and thus limited by the existing ink production process. Herein, an alternate technique of generating high-quality titanium dioxide (TiO 2 ) nanoparticle ink compatible with aerosol jet printing using laser ablation synthesis in solution (LASiS) is showcased. Dynamic light scattering data and transmission electron microscopy confirm the particle size distribution. UV–vis measurements are performed, and the Beer–Lambert relationship is used to determine the concentration of the generated ink. The inks generated at two different repetition rates are compared: 200 kHz and 1 MHz. X-Ray diffraction analysis of the aerosol jet printed thin film post-thermal sintering confirms the grain size and phase purity of the printed thin films. This work demonstrates the effectiveness of the LASiS technique in producing printable nanoparticle inks with little-to-no postprocessing.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Long-Term Trends for Marine Sulfur Aerosol in the Alaskan Arctic and Relationships With Temperature

Marine aerosol plays a vital role in cloud-aerosol interactions during summer in the Arctic. The recent rise in temperature and decrease in sea ice extent have the potential to impact marine biogenic sources. Compounds like methanesulfonic acid (MSA) and non-sea-salt sulfate (nss-SO 4 2- ), oxidation products of dimethyl sulfide (DMS) emitted by marine primary producers, are likely to increase in concentration. Long-term studies are vital to understand these changes in marine sulfur aerosol and potential interactions with Arctic climate. Samples were collected over three summers at two coastal sites on the North Slope of Alaska (Utqiagvik and Oliktok Point). MSA concentrations followed previously reported seasonal trends, with evidence of high marine primary productivity influencing both sites. When added to an additional data set collected at Utqiagvik, an increase in MSA concentration of + 2.5% per year and an increase in nss-SO 4 2- of + 2.1% per year are observed for the summer season over the 20-year record (1998–2017). This study identifies ambient air temperature as a strong factor for MSA, likely related to a combination of interrelated factors including warmer sea surface temperature, reduced sea ice, and temperature-dependent chemical reactions. Analysis of individual particles at Oliktok Point, within the North Slope of Alaska oil fields, showed evidence of condensation of MSA onto anthropogenic particles, highlighting the connection between marine and oil field emissions and secondary organic aerosol. Finally, this study shows the continued importance of understanding MSA in the Arctic while highlighting the need for further research into its seasonal relationship with organic carbon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

ARM FY2024 Aerosol Operations Plan

The Atmospheric Radiation Measurement user facility (ARM) deploys a suite of aerosol and trace gas (further mentions of aerosols will assume inclusion of trace gases) instrumentation at each of ARM's observatories. ARM currently deploys five Aerosol Observing Systems, one each at: Southern Great Plains (SGP); Eastern North Atlantic (ENA); ARM Mobile Fabilities (AMFI 1, 2, and 3). Aerosol measurements at ARM’s North Slope of Alaska (NSA) observatory have historically been made by the National Oceanic and Atmospheric Administration (NOAA) and provided to ARM through a collaboration. As ARM’s support for aerosol instrumentation increases, it is important for ARM to communicate plans and priorities for aerosol measurements to the community to maximize the benefit and planning around scientific activities and to advance confidence in ARM’s aerosol measurements. ARM will develop a yearly aerosol operations plan for the upcoming fiscal year (October 1-September 30) starting with FY24. This plan will be open and available through the ARM aerosol instrument webpages and will include: Review of the previous activities since the last plan (in this case, 2018); Planned activities and their priorities for the upcoming FY; Calibration timing and efforts; Planned activities for data products and value-added products (VAP).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

A Lagrangian analysis of pockets of open cells over the southeastern Pacific

Abstract. Pockets of open cells (POCs) have been shown to develop within closed-cell stratocumulus (StCu), and a large body of evidence suggests that the development of POCs result from changes in small-scale processes internal to the boundary layer rather than large-scale forcings. Precipitation is widely viewed as a key process important to POC development and maintenance. In this study, GOES-16 satellite observations are used in conjunction with MERRA-2 winds to track and compare the microphysical and environmental evolution of two populations of closed-cell StCu selected by visual inspection over the southeastern Pacific Ocean: one group that transitions to POCs and another comparison group (CLOSED) that does not. The high spatiotemporal resolution of the new GOES-16 data allows for a detailed examination of the temporal evolution of POCs in this region. We find that POCs tend to develop near the coast, last tens of hours, are larger than 104 km2, and often (88 % of cases) do not re-close before they exit the StCu deck. Most POCs are observed to form at night and tend to exit the StCu during the day when the StCu is contracting in area. Relative to the CLOSED trajectories, POCs have systematically larger effective radii, lower cloud drop number concentrations, a comparable conditional in-cloud liquid water path, and a higher frequency of more intense precipitation. Meanwhile, no systematic environmental differences other than boundary layer height are observed between POC and CLOSED trajectories. Interestingly, there are no differences in reanalysis aerosol optical depth between both sets of trajectories, which may lead one to the interpretation that differences in aerosol concentrations are not influencing POC development or resulting in a large number that re-close. However, this largely depends on the reanalysis treatment of aerosol–cloud interactions, and the product used in this study has no explicit handling of these important processes. These results support the consensus view regarding the importance of precipitation on the formation and maintenance of POCs and demonstrate the utility of modern geostationary remote sensing data in evaluating the POC life cycle.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Evaluation of a New Chemical Mechanism for 2-Amino-2-methyl-1-propanol in a Reactive Environment from CSIRO Smog Chamber Experiments

Amines are considered as an emerging class of atmospheric pollutants that are of great importance to atmospheric chemistry and new particle formation. As a typical amine, 2-amino-2-methyl-1-propanol (AMP) is one of the proposed solvents for capturing CO 2 from flue gas streams in amine-based post-combustion CO 2 capture plants, and it is expected to result in AMP emission and secondary products formation in the atmosphere. However, the current knowledge of its atmospheric chemistry and kinetics is poorly understood, particularly in a reactive environment. As such, in this work we used the CSIRO smog chamber to study the photo-oxidation of AMP in the presence of VOCs–NOx surrogate mixtures over a range of initial amine concentrations. O 3 formation was significantly inhibited when AMP was added to the surrogate VOCs–NOx mixtures, implying that AMP could alter known atmospheric chemical reaction pathways and the prevailing reactivity. Simultaneously, a large amount of AMP-derived secondary aerosol was formed, with a considerably high aerosol mass yield (i.e. ratio of aerosol formed to reacted AMP) of 1.06±0.20. Based on updated knowledge of its kinetics, oxidation pathways and product yields, we have developed a new mechanism (designated as CSIAMP-19) and integrated into the Carbon Bond 6 (CB6) chemical mechanism, and evaluated it against available smog chamber data. Compared with the existing AMP mechanism (designated as CarterAMP-08), the modified CB6 with CSIAMP-19 mechanism improves prediction against AMP–VOCs–NOx experiments across a range of initial AMP concentrations, within ±10% model error for gross ozone production. Our results contribute to scientific understanding of AMP photochemistry and to the development of the chemical mechanism of other amines. The updated AMP chemical reactions scheme can be further embedded into the chemical transport model for regional modelling scenarios where AMP-related emissions are of concern.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Subtask 2.6 – Optimization of Aerosol Mitigation Technology for Postcombustion CO 2 Capture

Growing concerns over the impact of CO 2 emissions from combustion sources on global climate change have prompted numerous research and development projects aimed at developing cost-effective technologies for CO 2 capture. One family of technologies being demonstrated at pilot and full scale globally is postcombustion CO 2 capture (PCCC) systems that employ amine-based solvents. The captured CO 2 can be compressed and permanently stored underground or used for enhanced oil recovery (EOR). The proximity of North Dakota’s lignite-fired fleet of power plants to potential CO 2 storage options creates a unique atmosphere for PCCC within the state. However, the aerosols present in lignite flue gas present a challenge for large-scale PCCC at North Dakota power plants. Aerosols can negatively impact the long-term performance of amine-based solvents for CO 2 capture. Amine-based solvents are volatile, and aerosols provide nucleation sites where amine vapors can condense. Because aerosols cannot be easily captured at the column outlet using conventional technologies, the amine-laden aerosols escape the system and lead to accelerated solvent losses. Moreover, aerosol components can chemically react with amines to form degradation products that can permanently deactivate the amine, cause fouling, and lead to hazardous emissions. Many of the elements that have been shown to catalyze solvent degradation are present in lignite coals and can exacerbate solvent replacement economics. Understanding this issue is critical to the implementation of solvent-based CO 2 capture systems as applied to lignite-fired generation systems. The Energy & Environmental Research Center (EERC) designed and carried out this project to optimize aerosol mitigation technology for PCCC at a lignite-fired power plant. To meet the goal of this project, the following objectives were identified: Determine the effectiveness of a wet electrostatic precipitator (WESP) on collection of aerosols at a low-rank coal-fired power station. Determine the impact of aerosols on the efficiency and degradation products of amine-based carbon capture systems fired with low-rank fuels. Work was conducted at Minnkota Power Cooperative’s (MPC’s) Milton R. Young (MRY) Station Unit 2 using a slipstream of flue gas from the outlet of the plant’s flue gas desulfurization (FGD) unit. To gather initial data for sizing and specifying a WESP for this system, a temporary pilot-scale WESP was rented and installed on-site. Several different conditions were tested to examine the impact of flow rate, voltage, and current on WESP performance. The WESP was effective at removing large particulate (>200 nm) but caused an increase in fine particulate (<75 nm). Fine particulate material at the inlet and outlet of the WESP was collected, analyzed, and showed that crystalline sulfates carried over from the plant’s FGD unit were being converted to fine aerosols and SO 2 was being converted to SO 3 through the WESP. Additionally, the high moisture content of the flue gas stream at this sample location also contributed to an overall increase in aerosol mass under some of the test conditions. Using the results from the rented WESP, the project team installed a smaller-scale WESP upstream of the EERC’s slipstream CO 2 capture system. Flue gas was routed through a pilot-scale FGD unit to remove SO 2 to very low levels (~1 ppm) and then through a direct contact cooler (DCC) to further cool the gas and to remove moisture. The gas exiting the DCC was then routed through the new WESP before passing to the CO 2 absorber columns. Fluor’s amine-based solvent was used to scrub CO 2 from the slipstream through a set of two absorber columns. The rich solvent was regenerated in a stripper column by heating to drive off captured CO 2 . The system operated using a catch-and-release method where the CO 2 was separated to provide data on the process, but the captured CO 2 was released back into the host site stack. Aerosols and sulfur species were measured at multiple locations throughout the pilot-scale system. The inlet FGD and DCC removed much of the particulate matter and gaseous sulfur upstream of the WESP. With this configuration, the WESP achieved >95% particulate capture. The new WESP did not show any of the increases in SO 3 or other aerosol species that had been consistently observed with the larger-scale WESP installed immediately downstream of the plant’s full-scale FGD unit. Particulate samples captured and analyzed from the WESP inlet did not show any presence of crystalline sulfate materials, indicating that the pilot-scale FGD and DCC were efficient at reducing carryover from the plant’s full-scale FGD unit. A set of parametric tests were conducted on the new WESP to assess the impacts of flow rate, voltage, number of online WESP fields, and gas-phase sulfur content on aerosol and sulfur transformations. The results showed that the WESP performed similarly well at all sets of conditions. Sulfur and particulate matter exiting the WESP were further reduced through the absorber column as the amine-based solvent captured some of the residual contaminants. Solvent analysis showed that these species were slowly concentrating in the solvent over the duration of the test. When the WESP was taken offline and the sulfur slip through the FGD allowed to rise, the sulfate content in the solvent rose sharply, showing that the extra FGD and WESP were effective at reducing sulfate and cation uptake. This would be expected to extend amine-based solvent life by slowing the formation of heat-stable salts and other degradation products. This subtask was cofunded through the EERC–U.S. Department of Energy Joint Program on Research and Development for Fossil Energy-Related Resources Cooperative Agreement No. DE-FE0024233. Nonfederal funding was provided by the North Dakota Industrial Commission and MPC.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2020

Experimental and computational study of particle formation kinetics in UF6 hydrolysis

The formation and growth of UO 2 F 2 particles by gas-phase UF 6 hydrolysis remains of interest to actinide chemistry researchers. The total number concentration of the UO 2 F 2 aerosol particles that can be produced in the reaction is regulated primarily by the availability of water molecules under our reactor conditions. An increase in water molecule concentration corresponds with a higher amount and larger size of UO 2 F 2 aerosol particles produced. The growth rates of aerosol particles appear to approach a single number in the range of [0.05 ± 0.03–0.08 ± 0.04] (nm s -1 ), as the molar ratio of water to UF 6 decreases below 1. The size of primary particles produced from the UF 6 hydrolysis under water-deprived conditions was estimated to be 3.6 ± 0.4 nm. As the molar ratio became greater than 1.7, the size of primary particles increased with increased availability of water molecules. The primary particle model developed in this work predicted a size range for the UO 2 F 2 primary particles similar to that estimated based on the data from gas-phase UF 6 hydrolysis experiments. This result suggests that the volume-driven coalescence process assumption used in the derivation of the primary particle model was reasonable. The ability to precisely control the availability of water molecules and reaction time could lead to the production of nearly monodispersed aerosol particles. This finding has significant implications in the engineering and manufacturing of fuel powder materials and possibly the future development and deployment of environmental sampling apparatus.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

TRACER-Tethersonde VOC data

One objective of TRACER-Tethersonde campaign was to deploy a volatile organic compound (VOC) sampler on the Tethered Balloon System (TBS) to create vertical profiles and characterize VOC composition. Volatile organic compounds (VOCs) are highly reactive precursor species that undergo atmospheric processing to form secondary products, including aerosol. VOC emissions are influenced by many factors that include but are not limited to temperature, time of day, local anthropogenic activities, and local vegetation, which result in large spatiotemporal variability. The vertical distribution of volatile species is crucial for understanding gas-phase processing for particle production but challenging to accomplish using currently available sampling devices. The standalone sampler built during the campaign enabled the execution of robust experimental designs, including sample collection using resin tubes at multiple altitudes on subsequent flights. Following field sampling, resin tubes were transported back to Baylor University for chemical analysis using a Markes International thermal desorption unit coupled with a gas chromatograph-tandem mass spectrometer (Thermo Scientific). The target analyte list includes biogenic and anthropogenic VOCs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Enhanced Atmospheric Research at the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) (Final Report)

The Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) was an international scientific expedition into the central Arctic sea ice to study the changing atmosphere-ice-ocean system and its key physical, chemical, and biological processes in a way that will support improved understanding and modeling of Arctic climate. The US Department of Energy’s Atmospheric Research Measurement (ARM) Program operated its second ARM Mobile Facility (AMF2) as a major contribution to the expedition, and the Atmospheric System Research (ASR) program supported this project to maximize the success of DOE’s involvement in MOSAiC. This project has enabled the successful collection of data through support of field operations plans, in-field operational implementation, oversight of real-time data quality, and representing DOE’s interests within the broader international MOSAiC endeavor. The project has promoted scientific research by facilitating and leading a number of efforts to develop value-added products that will support research, including products related to aerosol properties, trace gases, cloud properties, snowfall, the surface energy budget, and a merged product designed for model assessment. These products and related analyses have also contributed to numerous scientific publications on related themes as well as direct model evaluation. Lastly, the project has engaged in a great deal of communication and outreach activities that help to publicize and promote both MOSAiC and DOE’s specific contribution to a broad audience that includes the scientific community, program management, policy makers, and the general public.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Deep Learning Parameterization of Vertical Wind Velocity Variability via Constrained Adversarial Training

Atmospheric models with typical resolution in the tenths of kilometers cannot resolve the dynamics of air parcel ascent, which varies on scales ranging from tens to hundreds of meters. Small-scale wind fluctuations are thus characterized by a subgrid distribution of vertical wind velocity W with standard deviation σ W . The parameterization of σ W is fundamental to the representation of aerosol–cloud interactions, yet it is poorly constrained. Using a novel deep learning technique, this work develops a new parameterization for σ W merging data from global storm-resolving model simulations, high-frequency retrievals of W , and climate reanalysis products. The parameterization reproduces the observed statistics of σ W and leverages learned physical relations from the model simulations to guide extrapolation beyond the observed domain. Incorporating observational data during the training phase was found to be critical for its performance. The parameterization can be applied online within large-scale atmospheric models, or offline using output from weather forecasting and reanalysis products.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Saharan Dust Transport Predictability Utilizing a Subseasonal Experiment (SubX) Model

Prediction of Saharan dust customarily requires complex aerosols models and observations. A previous study of the Miami, Florida dust record in conjunction to reanalysis data discovered a possible source of subseasonal predictability using a dust-transport-efficiency (DTE) index. Development of the Subseasonal Forecast Experiment (SubX) has expanded global forecast products; producing multi-model ensemble forecasts out to 45 days. Retrospective forecast data from the Community Climate System Model version 4.0 (CCSM4) is used in direct comparison to National Centers for Environmental Prediction (NCEP) reanalysis to evaluate the CCSM4 subseasonal forecast and DTE index prediction skill of weekly dust variability. Successful prediction of weekly dust transport using the DTE index is variable year-to-year. The DTE most successfully predicts dust when there is high variability in the tropical winds, likely due to a fluctuating subtropical high, and is not dependent on the overall mean flow or total dust mass transported. The CCSM4 SubX retrospective forecast well represents North Atlantic meteorology out to week-3 in both mean flow and variability. Dust transport can be predicted using the DTE index and CCSM4 SubX retrospective forecasts at week-1 leads to the same success as contemporaneous NCEP reanalysis.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

SCILLA Secondary Aerosol Volume Concentration Airborne Data

This data set contains secondary aerosol volume concentration in cubic micrometers per cubic centimeter (um^3/cm^3). The aerosol was generated in an oxidation flow reactor (OFR) and its volume concentration measured with a scanning mobility particle sizer (SMPS). Both components were designed and built at the University of California Riverside. Ambient particles were removed with a Teflon filter upstream of the OFR and then pure ammonium sulfate particles were added to create a stable aerosol surface area on which low-volatility oxidation products condense. High concentrations of hydroxyl radical (OH) formed inside the OFR accelerate the oxidative chemistry that would typically occur over a period of several days in the atmosphere, resulting in the production of secondary aerosol from precursor gases present in the ambient air. Concentrations of added ozone and water vapor were controlled to produce the desired and approximately constant level of photochemical aging. The reactor temperature was controlled, while the pressure was not, and was always slightly lower than that of the sampled outside air. Sampled air was pulled from above the Naval Postgraduate School’s (NPS) Twin Otter aircraft through a rear-facing, ¼” OD PFA Teflon tube. The sample stream was split between the OFR and several gas analyzers (NOx, CO, O3, and H2O). Though not contained in these files, data from an aerosol mass spectrometer intermittently operated downstream of the OFR are also available.

{"secondary aerosol concentration",aerosol_concent↗
DOE OSTI2024

Bias Correction and Statistical Downscaling of Solar Radiation Using NA-CORDEX and the NSRDB

The current state-of-art for estimating long-term PV production uses long-term estimates of solar radiation variables, such as global horizontal irradiance (GHI), from previous years. This data is used in models such as the System Advisor Model (SAM) or PYSyst to predict annual production for a PV plant. This information is then used to estimate the production over the next 20 years (a typical plant lifetime) under the assumption that the variability over the current period is representative of the future. As the PV industry moves to extend plant lifetimes to 50 years the current assumptions of representativeness of weather may not be appropriate. This is especially true as our climate changes rapidly. To assess long-term PV production, future projections for solar radiation based on projected carbon emissions are readily available in regional and global climate models. However, climate model projections contain inherent biases that may need to be corrected for accurate analysis of future projections of climate variables. Several studies have analyzed projections of solar radiation for future years, however the accuracy of the model output compared to current and historic data has not been widely studied. Chen (2021) showed that available climate models do not accurately represent solar radiation in some cases, over-projecting GHI at the surface while under-projecting its obstructions, such as clouds and aerosols. This works aims to (1) increase understanding of the accuracy of solar radiation currently available in global and regional climate models and (2) implement bias correction through linear models based on reanalysis data compared to observed solar radiation. The latter aim will be conducted using available observed solar radiation data and modeled data from several regional climate models (RCMs). The bias correction method will be applied to projections of solar radiation resulting in a more accurate representation of the future of solar production.

climate data↗
DOE OSTI2020

Investigating Secondary Aerosol Processes in the Amazon through Molecular-level Characterization of Semi-Volatile Organics

In areas where biogenic emissions are oxidized in the presence of anthropogenic pollutants, it has become increasingly apparent that secondary organic aerosol (SOA) formation from biogenic volatile organic compounds (BVOCs) is substantially enhanced. The Amazon forest is the dominant source of BVOCs globally, and the forest is rapidly being converted to urban and agricultural uses. We participated in a collaborative field study located in the Amazon region around Manaus, Brazil, in 2014 (Green Ocean Amazon; GoAmazon). This study was designed to comprehensively examine how BVOC emissions (specifically, the most highly emitted non-methane hydrocarbon, isoprene, and lesser studied sesquiterpenes) and their interaction with anthropogenic pollution (i.e., nitrogen oxides, sulfur dioxide, and black carbon) alter the atmosphere’s oxidative capacity, influence secondary aerosol formation, atmospheric composition and, ultimately, affect the earth’s radiation balance and climate. We provide the first hourly, in-situ measurement of 30 sesquiterpenes and 4 diterpenes, roughly estimating that sesquiterpene oxidation contributes to 10-14% of ozone reactive loss by terpenes and at least 0.4–5% (median 1 %) of total submicron OA mass. However, this is likely a low-end estimate, as evidence for additional unaccounted sesquiterpenes and their oxidation products clearly exists. We also provide new perspectives on sulfate, NO x , and particle acidity influencing isoprene-derived SOA, comparing the central Amazon environment with Southeastern U.S.A. summer, representing clean to polluted conditions, respectively. We find that summed concentrations of isoprene-derived SOA tracers correlated with particulate sulfate spanning three orders of magnitude, suggesting that 1 μg m -3 reduction in sulfate corresponds with at least ~0.5 μg m -3 reduction in isoprene-derived SOA. We also find that SOA mass derived from isoprene oxidation in the presence of NO x is primarily comprised of aerosol sulfate bound with isoprene oxidation products (i.e. organosulfates), ~97% in the Amazon and ~55% in the Southeastern U.S. We infer under natural conditions in high isoprene emission regions, preindustrial aerosol sulfate was almost exclusively isoprene-derived organosulfates, which are traditionally thought as representative of anthropogenic influence. We further report the first field observations showing that particle acidity impacts the distribution of isoprene oxidation tracers in the gas and particle phases, providing physicochemical insight into isoprene SOA formation chemistry. Coupled with other co-located measurements by the DOE Atmospheric Radiation Measurement (ARM) team and collaborating PIs at our measurement site (called T3), on the G1 aircraft, and at additional field sites (T0, T1, T2) this data set has been used to understand emission, oxidation, and particle formation pathways at the molecular level, to elucidate how these pathways change when influenced by anthropogenic sources, and to evaluate their importance for the atmospheric budget of aerosols and the earth’s radiation balance on regional scales. Recommendations: Further constraint of the role of sesquiterpenes on ozone (O 3 ) reactivity and SOA formation is limited by the availability of authentic standards and synthesized compounds of sesquiterpenes and their oxidation products. Future research efforts should focus on making such standards available via custom synthesis to allow for accurate quantification and focused oxidation experiments that will fully elucidate the chemistry of these compounds in the atmosphere. Further, reductions in aerosol sulfate (via SO 2 emissions control) continues to be one of the most effective methods to reduce SOA formation from isoprene, but the concerted role of ammonia (NH 3 ) gas emissions from (agricultural) industry and other sources requires more investigation to better understand the role of aerosol acidity in SOA formation and potential controls. As GoAmazon particles can be more acidic compared to areas with greater anthropogenic NH 3 emissions, this promotes relatively greater organosulfate (OS) formation from isoprene even in the presence of NO x . Because OS and inorganic sulfate differ in water uptake properties, this implies preindustrial aerosol sulfate (albeit less abundant) may have been less reflective than current earth system models assume. Further research should investigate the radiative impacts of organic vs inorganic sulfate in aerosols to improve model representation. Finally, future work (currently underway) should include constraint of the contributions of monoterpene (C 10 H 16 ) BVOCs and biomass burning VOCs as precursors to SOA formation in the region as well as their impacts on radiative forcing in the climate system.

54 ENVIRONMENTAL SCIENCES↗