Search NASA⌕ Search

SEARCH · Search NASA

Results for “alloy solidification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Evaluation of the effect of alloy chemistry on the susceptibility of weld solidification cracking of Alloy 709 weldment and development of mitigation strategy

Alloy 709 is an attractive candidate construction material for Sodium Fast Reactor. As part of the Alloy 709 Intermediate Term Test Program, this work covers the development of the technical basis for welding fabrication and weld qualification of Alloy 709. The phase of research reported herein focused on the issue of weld solidification cracking recently experienced in some experimental heats of Alloy 709 with relatively high P levels. To this end, computational thermodynamics simulations were used to investigate the solidification behavior of Alloy 709.

36 MATERIALS SCIENCE↗

Directional solidification of aqueous TiO 2 suspensions under reduced gravity

Porous materials exhibiting aligned, elongated pore structures can be created by directional solidification of aqueous suspensions—where particles are rejected from a propagating ice front and form interdendritic, particle-packed walls—followed by sublimation of the ice, and sintering of the particle walls. Theoretical models that predict dendritic lamellae spacing—and thus wall and pore width in the final materials—are currently limited due to an inability to account for gravity-driven convective effects during solidification. In this work, aqueous suspensions of 10–30 nm TiO 2 nanoparticles are solidified on parabolic flights under micro-, lunar (~0.17 g; g l = 1.62 m/s 2 ), and Martian (~0.38 g; g m = 3.71 m/s 2 ) gravity and compared to terrestrially-solidified samples. After ice sublimation and sintering, all resulting TiO 2 materials exhibit elongated lamellar pores replicating the ice dendrites. Furthermore, increasing the TiO 2 fraction in the suspensions leads to decreased lamellar spacing in all samples, regardless of gravitational acceleration. Consistent with previous studies of microgravity solidification of binary metallic alloys, lamellar spacing decreases with increasing gravitational acceleration. Furthermore, mean lamellar spacing for 20 wt% TiO 2 nanoparticles suspensions under micro-, lunar, Martian, and terrestrial gravity are, respectively: 50 ± 8, 34 ± 11, 30 ± 6, and 23 ± 9 μm, indicating that gravity-driven convection strongly affects lamellae spacing under terrestrial gravity conditions. Gravitational effects on lamellar spacing are highest at low TiO 2 fractions in the suspension; for 5 wt% TiO 2 suspensions, the microgravity lamellar spacing is more than twice that under terrestrial gravity (182 ± 21 vs. 81 ± 23 μm). Results of this study are in good agreement with previous studies of binary metallic alloy solidification where primary dendrite spacing increases under microgravity. Additionally, literature data from ice-templating systems are used to discuss a dependence on lamellae spacing of the density ratio of particles and fluid.

36 MATERIALS SCIENCE↗

Materials processing in the reduced-gravity environment of space

Studies of the effects of gravitation on the behavior of fluids and the shapes of materials for the years 1977-1982 are reviewed, with a focus on ground-based research which complements and gives direction to experimentation in the reduced-gravity environment of space. Fluid-behavior topics discussed include crystal growth from melts and from vapor, dendritic solidification and casting, multiphase alloy solidification, electrophoresis, convection behavior, and special heat-flow considerations characteristic of the space environment. With regard to solids, such subjects as containerless positioning technology and its applications (in glass preparation, liquid drop and shell studies, nucleation experiments, and measurements of fundamental properties of molten reactants), liquid floating zones, solid self-deformation, and sedimentation and buoyancy effects are considered and illustrated.

Carruthers, J. R.↗

Numerical Modeling and In-Situ Observations of the Dynamics of the Solid/Liquid Interface Morphology During Directional Solidification of Alloys

The departure from interface planarity and the subsequent evolution to a periodic array of cells or dendrites is a fundamental process that characterizes most microstructures in solidified alloys. The growing demand for high quality alloys and semiconductor crystals requires a precise methodology to predict and subsequently control both the interface morphology and the distribution of impurities, additives, and phases in the grown crystal. Apart from its practical significance, the study of morphological evolution has also been viewed as a means to unearth a general paradigm for pattern formation in nature. A previously developed 2D numerical model for the solid/liquid interface tracking has been further refined and used to simulate the time-evolution of the perturbations on the interface. The dynamics of the local growth velocity, interface undercooling and solute concentration at the interface has been theoretically predicted by means of the numerical model for Al-Cu and Pb-Sn alloys. The model shows that perturbations with a wavelengths, lambda greater than a critical wavelength lambda(sub c) continue to grow in time whereas perturbations with lambda < lambda(sub c) cease to propagate. The model further predicts that under certain conditions perturbation can also propagate along the interface. Comparison of these predictions with existing theories of pattern formation and experimental results will be discussed.

Catalina, Adrian V.↗

Numerical simulation of freckle formation in directional solidification of binary alloys

A mathematical model of solidification is presented which simulates the formation of segregation models known as 'freckles' during directional solidification of binary alloys. The growth of the two-phase or dendritic zone is calculated by solving the coupled equations of momentum, energy, and solute transport, as well as maintaining the thermodynamic constraints dictated by the phase diagram of the alloy. Calculations for lead-tin alloys show that the thermosolutal convection in the dendritic zone during solidification can produce heavily localized inhomogeneities in the composition of the final alloy.

Felicelli, Sergio D.↗

Directional Solidification and Mechanical Properties of NiAl-NiAlTa Alloys

Directional solidification of eutectic alloys is a promising technique for producing in-situ composite materials exhibiting a balance of properties. Consequently, the microstructure, creep strength and fracture toughness of directionally solidified NiAl-NiAlTa alloys were investigated. Directional solidification was performed by containerless processing techniques to minimize alloy contamination. The eutectic composition was found to be NiAl-15.5 at% Ta and well-aligned microstructures were produced at this composition. A near-eutectic alloy of NiAl-14.5Ta was also investigated. Directional solidification of the near-eutectic composition resulted in microstructures consisting of NiAl dendrites surrounded by aligned eutectic regions. The off-eutectic alloy exhibited promising compressive creep strengths compared to other NiAl-based intermetallics, while preliminary testing indicated that the eutectic alloy was competitive with Ni-base single crystal superalloys. The room temperature toughness of these two-phase alloys was similar to that of polycrystalline NiAl even with the presence of the brittle Laves phase NiAlTa.

Johnson, D. R.↗

Real Time In Situ Observations of Equiaxed Dendrite Coherency in Al-Cu Alloys Using High-Brilliance, 3rd Generation Synchrotron Sources

In the last decade synchrotron X-ray sources have fast become the tool of choice for performing in-situ high resolution imaging during alloy solidification. This paper presents the results of an experimental campaign carried out at the European Synchrotron Radiation Facility, using a Bridgman furnace, to monitor phenomena during solidification of Al-Cu alloys - specifically the onset of equiaxed dendrite coherency. Conventional experimental methods for determining coherency involve measuring the change in viscosity or measuring the change in thermal conductivity across the solidifying melt Conflicts arise when comparing the results of these experimental techniques to find a relationship between cooling rate and coherency fraction. It has been shown that the ratio of average velocity to the average grain diameter has an inversely proportional relationship to coherency fraction. In-situ observation therefore makes it possible to measure these values directly from acquired images sequences and make comparisons with published results.

Murphy, Andrew G.↗

Widmannstätten laths in Ti48Al2Cr2Nb alloy by undercooled solidification

Widmannstätten laths in Ti48Al2Cr2Nb alloy were obtained by containerless electromagnetic levitation during undercooled solidification rather than heat treatments in most cases. The nucleation of γ{sub Widmannstätten} is confirmed by the thermal history of the second recalescence behaviour. High dislocation density, stacking faults and dislocation slip are observed by transmission electron microscopy. By quantitative analysis of the transformation energy, the driving force for γ{sub Widmannstätten} in the solid state phase transformation is calculated, compared with that of heat treatments. Meanwhile, the proper undercoolings (ΔT = 257–300 K), post-solidification cooling rates (11.1–29.1 K/s), the fine lamellar colony sizes (306–467 μm) and proper undercoolings in the solid state phase transformation are in favour of promoting the formation of Widmannstätten laths at moderate undercoolings. - Graphical abstract: Display Omitted - Highlights: • Widmannstätten laths were observed in undercooled TiAl alloy. • The influencing factors were discussed in undercooled TiAl alloy. • An analysis of the nucleation of γ{sub Widmannstätten} is carried out.

36 MATERIALS SCIENCE↗

Space Processing Applications Rocket (SPAR) project, SPAR 9

SPAR 9 (R-17) payload configuration, rocket performance, payload support, science payload instrumentation, and payload recovery are discussed. Directional solidification of magnetic composites, directional solidification of immiscible aluminum-indium alloys, and comparative alloy solidification experiments are reported.

Poorman, R.↗

Benchmarking of massively parallel phase-field codes for directional solidification

We present a detailed benchmark comparing two state-of-the-art phase-field implementations for simulating alloy solidification under experimentally relevant conditions. The study investigates the directional solidification of Al-3wt%Cu under high-velocity solidification conditions and SCN-0.46wt% camphor under microgravity conditions from National Aeronautics and Space Administration (NASA) DECLIC-DSI-R experiments. Both codes, one employing finite-difference discretization with uniform mesh and GPU-acceleration (GPU-PF) and the other one employing finite-element discretization with adaptive-mesh and CPU-parallelization (PRISMS-PF), solve the same quantitative phase-field formulation that incorporates an anti-trapping current for the solidification of dilute alloys. We evaluate the predictions of each code for dendritic morphology, primary spacing, and tip dynamics in both 2D and 3D, as well as their numerical convergence and computational performance. While existing benchmark problems have primarily focused on simplified or small-scale simulations, they do not reflect the computational and modeling challenges posed by employing experimentally relevant time and length scales. Our results provide a practical framework for assessing phase-field code performance as well as validating and facilitating their application in integrated computational materials engineering (ICME) workflows that require integration with realistic experimental data.

36 MATERIALS SCIENCE↗

Transparent Analogs for Alloy Phase Studies

Report describes experiments to add information to data base supporting use of transparent, partially miscible liquids and solids as analogs in studies of alloy solidification. Behavior of these materials observed directly while they undergo liquid/liquid and liquid/solid phase transformations. Light-scattering techniques used to determine phase boundaries. Transparent analogs allow observation of both solidification patterns and processes leading to those patterns, whereas metal alloys require tedious post-solidification metallographic analyses because processes not generally observed. Experiments with transparent substances safer and cheaper since conducted at much lower temperatures.

Frazier, D. O.↗

Study on solidification of immisible alloys (M-10)

Alloying of immiscible alloys under microgravity is of interest in metallurgical processes. Several experiments investigating the alloying of immiscible alloys, such as Al-In, Al-Bi, Zn-Bi, and Zn-Pb, were done in space. Homogeneous distribution of small L2 particles in the matrix, such as an emulsion structure, was expected in the space-solidifed alloys. However, the alloys demonstrated an extremely segregated structure. To date insufficient information was obtained to explain these unexpected results. Our experiment was proposed to clarify the solidification manner of immiscible alloys and to obtain fundamental information concerning structural control of the alloys. In space, density differences between the two liquids separated in immiscible regions can be neglected, so that no sedimentation of L(sub 2) phase will take place. When the growth of the alloys is interrupted and this status is frozen by an adequate rapid cooling procedure, it will provide much information concerning decomposing homogeneous liquid and the interaction between the monotectic growth front morphology and the distribution of L(sub 2) phase. It is anticipated that the results will be useful for elucidating the monotectic solidification manner and it will be instructive to explain the segregated structures obtained in the past space experiments.

Kamio, Akihiko↗