Search NASA⌕ Search

SEARCH · Search NASA

Results for “allyl”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Cocontinuous Nanostructures by Microphase Separation of Statistically Cross-Linked Polystyrene/Poly(2-vinylpyridine) Networks

Cocontinuous polymeric nanostructures have drawn considerable attention due to their ability to combine distinct, percolation-dependent properties of two different polymer domains. Randomly end-linked copolymer networks (RECNs) have previously been shown to support the formation of disordered cocontinuous nanostructures across wide composition windows in a robust way. However, achieving highly efficient linking of telechelic polymers with excellent end-group fidelity often requires complex synthetic routes. As an alternative, we study here statistically cross-linked copolymer networks (SCCNs) composed of polystyrene and poly(2-vinylpyridine) (PS and P2VP) with cross-linkable allyl pendent groups that are conveniently synthesized by controlled radical copolymerization. Via selective extraction of P2VP, coupled with gravimetry, small-angle X-ray scattering, and electron microscopy, we find disordered cocontinuous phases across wide composition ranges (up to ≈ 35 wt %), approaching values previously determined for RECNs. Remarkably, even for samples that appear to exhibit full percolation, a substantial fraction of P2VP (≈ 20–30 wt %) cannot be removed, which we ascribe to short strands between nearby cross-linkers that are physically embedded within PS domains. Here, the resulting PS porous monoliths with residual surface P2VP layers enable facile surface modification to resist protein adsorption and templating of porous gold nanostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

(CAAC)Copper Catalysis Enables Regioselective Three-Component Carboboration of Terminal Alkynes

Here, cyclic(alkyl)(amino)carbene (CAAC) ligands are found to perturb regioselectivity of the copper-catalyzed carboboration of terminal alkynes, favoring the less commonly observed internal alkenylboron regiosomer through an α-selective borylcupration step. A variety of carbon electrophiles participate in the reaction, including allyl alcohols derivatives and alkyl halides. The method provides a straightforward and selective route to versatile tri-substituted alkenylboron compounds that are otherwise challenging to access.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Preventing Loss of Selectivity during the Oxidative Dehydrogenation of Propane over Supported Vanadium Catalysts

Supported vanadium materials are promising catalysts for the oxidative dehydrogenation of propane to propylene (ODHP), but a lack of mechanistic understanding limits the rational design of catalysts with improved propylene selectivity. Adding Ta to V/SiO 2 increases the propylene selectivity, as well as the activity, leading to superior performance compared to state-of-the-art boron-based systems. In this contribution, we utilize this surprising promotional effect of Ta to elucidate key elements of the mechanistic cycle. Through a combination of characterization techniques, computational modeling, and kinetic experiments, we show that the catalytic cycle over V/SiO 2 likely involves the formation of an isopropyl alcohol intermediate, the fate of which is in kinetic competition between subsequent dehydration to propylene or further oxidation. Furthermore, we show that the relatively facile propylene overoxidation observed for these materials occurs via the epoxidation of propylene by a proposed peroxovanadium intermediate, rather than the abstraction of propylene’s allylic C–H bond as previously assumed. Using these key mechanistic features, we rationalize the enhanced selectivity and activity of Ta promotion. In conclusion, our mechanistic framework offers avenues for future catalyst development to improve supported vanadium materials for ODHP.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Role Evaluation of Active Groups in Lignin on UV-Shielding Performance

The contribution of the active groups in lignin to ultraviolet (UV)-shielding performance still remains unclear. In this study, we employed 16 lignin model compounds and theoretical calculations to ascertain the contribution of different functional groups to UV-shielding performance. These results showed that the order of UV-shielding performance on functional groups was -C=C–CHO > -C=C–COOH > -C=C–CH 2 OH > --C=C > quinone > -COOH > -OCH 3 ≈ -OH. Moreover, the synergism between the para-substituted electron-donating group -OH and the electron-withdrawing group allyl on the aromatic ring played a major role in UV-shielding performance of lignin models, whereas the additive effect of meta/ortho-substituted -OCH 3 played a secondary role. Furthermore, we found that the hydrophile–lipophile balance (HLB) value of lignin models also greatly affected the sunscreen protection factor (SPF) of lignin model-based sunscreens. A closer HLB value of lignin to 8.89 corresponded with a higher SPF of the lignin model-based sunscreen. The commercial photoprotective ingredient ethylhexyl methoxycinnamate (EHMC) and lignin models had a synergistic effect on UV-shielding performance caused by the π–π stacking interaction between the parallel-displaced stacked aromatic rings of lignin models and EHMC. Additionally, the UV irradiation test showed that these sunscreens prepared using lignin models and EHMC exhibited good photostability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Contra-Thermodynamic Positional Isomerization of Olefins

A light-driven method for the contra-thermodynamic positional isomerization of olefins is described. In this work, stepwise PCET activation of a more substituted and more thermodynamically stable olefin substrate is mediated by an excited-state oxidant and a Brønsted base to afford an allylic radical that is captured by a Cr(II) cocatalyst to furnish an allylchromium- (III) intermediate. In situ protodemetalation of this allylchromium complex by methanol is highly regioselective and affords an isomerized and less thermodynamically stable alkene product. The higher oxidation potential of the less substituted olefin isomer renders it inert to further oxidation by the excited-state oxidant, enabling it to accumulate in solution over the course of the reaction. A broad range of isopropylidene substrates are accommodated, including enol ethers, enamides, styrenes, 1,3-dienes, and tetrasubstituted alkyl olefins. Mechanistic investigations of the protodemetalation step are also presented.

14 SOLAR ENERGY↗
DOE OSTI2022

13 C ENDOR Characterization of the Central Carbon within the Nitrogenase Catalytic Cofactor Indicates That the CFe 6 Core Is a Stabilizing “Heart of Steel”

Substrates and inhibitors of Mo-dependent nitrogenase bind and react at Fe ions of the active-site FeMo-cofactor [7Fe–9S–C–Mo–homocitrate] contained within the MoFe protein α-subunit. The cofactor contains a CFe 6 core, a carbon centered within a trigonal prism of six Fe, whose role in catalysis is unknown. Targeted 13 C labeling of the carbon enables electron-nuclear double resonance (ENDOR) spectroscopy to sensitively monitor the electronic properties of the Fe–C bonds and the spin-coupling scheme adopted by the FeMo-cofactor metal ions. Here this report compares 13 CFe 6 ENDOR measurements for (i) the wild-type protein resting state (E 0 ; α-Val 70 ) to those of (ii) α-Ile 70 , (iii) α-Ala 70 -substituted proteins; (iv) crystallographically characterized CO-inhibited “hi-CO” state; (v) E 4 (4H) Janus intermediate, activated for N 2 binding/reduction by accumulation of 4[ e– /H + ]; (vi) E 4 (2H)* state containing a doubly reduced FeMo-cofactor without Fe-bound substrates; and (vii) propargyl alcohol reduction intermediate having allyl alcohol bound as a ferracycle to FeMo-cofactor Fe6. All states examined, both S = 1/2 and 3/2 exhibited near-zero 13 C isotropic hyperfine coupling constants, $^Ca$ = [-1.3 ↔ +2.7] MHz. Density functional theory computations and natural bond orbital analysis of the Fe-C bonds show that this occurs because a (3 spin-up/3 spin-down) spin-exchange configuration of CFe 6 Fe-ion spins produces cancellation of large spin-transfers to carbon in each Fe–C bond. Previous X-ray diffraction and DFT both indicate that trigonal-prismatic geometry around carbon is maintained with high precision in all these states. The persistent structure and Fe–C bonding of the CFe 6 core indicate that it does not provide a functionally dynamic (hemilabile) “beating heart”-instead it acts as “a heart of steel”, stabilizing the structure of the FeMo-cofactor-active site during nitrogenase catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Catalytic 1,3-Proton Transfer in Alkenes Enabled by Fe=NR Bond Cooperativity: A Strategy for p K a -Dictated Regioselective Transposition of C=C Double Bonds

Transition metal catalyzed alkene double bond transposition usually involves metal hydride intermediates. Despite significant advances in the design of catalysts that dictate product selectivity, control over substrate selectivity is less advanced and transition metal catalysts that selectively transpose double bonds in substrates containing multiple 1-alkene functionalities are rare. Herein, we report that the three-coordinate high spin (S = 2) Fe(II) imido complex [Ph 2 B( t BuIm) 2 Fe=NDipp][K(18-C-6)THF 2 ] (1-K(18-C-6)) catalyzes 1,3-proton transfer from 1-alkene substrates to afford 2-alkene transposition products. Mechanistic investigations involving kinetics, competition, and isotope labeling studies, supported by experimentally calibrated DFT computations, strongly support an unusual nonhydridic mechanism for alkene transposition that is enabled by the cooperative action of the iron center and basic imido ligand. As dictated by the pK a of the allylic protons, this catalyst enables the regioselective transposition of C=C double bonds in substrates containing multiple 1-alkenes. The high spin (S = 2) state of the complex allows a wide scope of functional groups to be tolerated, including those that are typical catalyst poisons, such as amines, N-heterocycles, and phosphines. Furthermore, these results demonstrate a new strategy for metal-catalyzed alkene transposition with predictable substrate regioselectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Template-independent enzymatic synthesis of RNA oligonucleotides

Abstract RNA oligonucleotides have emerged as a powerful therapeutic modality to treat disease, yet current manufacturing methods may not be able to deliver on anticipated future demand. Here, we report the development and optimization of an aqueous-based, template-independent enzymatic RNA oligonucleotide synthesis platform as an alternative to traditional chemical methods. The enzymatic synthesis of RNA oligonucleotides is made possible by controlled incorporation of reversible terminator nucleotides with a common 3′-O-allyl ether blocking group using new CID1 poly(U) polymerase mutant variants. We achieved an average coupling efficiency of 95% and demonstrated ten full cycles of liquid phase synthesis to produce natural and therapeutically relevant modified sequences. We then qualitatively assessed the platform on a solid phase, performing enzymatic synthesis of severalN + 5 oligonucleotides on a controlled-pore glass support. Adoption of an aqueous-based process will offer key advantages including the reduction of solvent use and sustainable therapeutic oligonucleotide manufacturing.

Biotechnology & Applied Microbiology↗
DOE OSTI2020

Elucidating the differences in oxidation of high-performance α- and β- diisobutylene biofuels via Synchrotron photoionization mass spectrometry

Abstract Biofuels are a promising ecologically viable and renewable alternative to petroleum fuels, with the potential to reduce net greenhouse gas emissions. However, biomass sourced fuels are often produced as blends of hydrocarbons and their oxygenates. Such blending complicates the implementation of these fuels in combustion applications. Variations in a biofuel’s composition will dictate combustion properties such as auto ignition temperature, reaction delay time, and reaction pathways. A handful of novel drop-in replacement biofuels for conventional transportation fuels have recently been down selected from a list of over 10,000 potential candidates as part of the U.S. Department of Energy’s (DOE) Co-Optimization of Fuels and Engines (Co-Optima) initiative. Diisobutylene (DIB) is one such high-performing hydrocarbon which can readily be produced from the dehydration and dimerization of isobutanol, produced from the fermentation of biomass-derived sugars. The two most common isomers realized, from this process, are 2,4,4-trimethyl-1-pentene (α-DIB) and 2,4,4-trimethyl-2-pentene (β-DIB). Due to a difference in olefinic bond location, the α- and β- isomer exhibit dramatically different ignition temperatures at constant pressure and equivalence ratio. This may be attributed to different fragmentation pathways enabled by allylic versus vinylic carbons. For optimal implementation of these biofuel candidates, explicit identification of the intermediates formed during the combustion of each of the isomers is needed. To investigate the combustion pathways of these molecules, tunable vacuum ultraviolet (VUV) light (in the range 8.1–11.0 eV) available at the Lawrence Berkeley National Laboratory’s Advanced Light Source (ALS) has been used in conjunction with a jet stirred reactor (JSR) and time-of-flight mass spectrometry to probe intermediates formed. Relative intensity curves for intermediate mass fragments produced during this process were obtained. Several important unique intermediates were identified at the lowest observable combustion temperature with static pressure of 93,325 Pa and for 1.5 s residence time. As this relatively short residence time is just after ignition, this study is targeted at the fuels’ ignition events. Ignition characteristics for both isomers were found to be strongly dependent on the kinetics of C 4 and C 7 fragment production and decomposition, with the tert-butyl radical as a key intermediate species. However, the ignition of α-DIB exhibited larger concentrations of C 4 compounds over C 7 , while the reverse was true for β-DIB. These identified species will allow for enhanced engineering modeling of fuel blending and engine design.

09 BIOMASS FUELS↗
DOE OSTI2025

Dual C–H functionalization of polyolefins for covalent adaptable network formation via cooperative electrolysis

The increasing demand for carbon fibre-reinforced polymer composites with polyolefin thermoset matrices will lead to the generation of large volumes of low molecular weight waste oligomers during the fibre recovery process. To address this challenge, we present a cooperative electrolytic dual C–H bond functionalization strategy for the one-step installation of two key functional groups essential for dynamic linkages of these deconstructed oligomers. Through direct competition studies, we reveal the predominance of tertiary allylic C–H activation along the complex, branched oligomer backbone. The resulting difunctionalized oligomers form covalently adaptable networks with exceptional circularity. By establishing a sustainable pathway for upcycling deconstructed oligomers from carbon fibre-reinforced polymer fibre recovery, this strategy introduces thermoset materials derived directly from waste. Here, it advances sustainable manufacturing practices, contributing to a net-zero waste synthetic ecosystem, and highlights the prospects of mediated electrolysis in macromolecular transformations.

Electrocatalysis↗
DOE OSTI2020

Reduction of carbon dioxide at a plasmonically active copper–silver cathode

Electrochemically deposited copper nanostructures were coated with silver to create a plasmonically active cathode for carbon dioxide (CO 2 ) reduction. Illumination with 365 nm light, close to the peak plasmon resonance of silver, selectively enhanced 5 of the 14 typically observed copper CO 2 reduction products while simultaneously suppressing hydrogen evolution. At low overpotentials, carbon monoxide was promoted in the light and at high overpotentials ethylene, methane, formate, and allyl alcohol were enhanced upon illumination; generally C 1 products and C 2 /C 3 products containing a double carbon bond were selectively promoted under illumination. Temperature-dependent product analysis in the dark showed that local heating is not the cause of these selectivity changes. Finally, while the exact plasmonic mechanism is still unknown, these results demonstrate the potential for enhancing CO 2 reduction selectivity at copper electrodes using plasmonics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Advances in catalytic production processes of biomass-derived vinyl monomers

Plastic industries currently source the majority of monomers from crude oil substances. Although we have witnessed a significant interest of companies in the utilization of sustainable feedstock materials for bio-based compound synthesis in the past decade, the transition to photosynthetic or chemosynthetic plant-based production in a circular carbon economy is largely slow due to complex biomass processing, costs and related reaction factors. The upgrade of the separated platform chemicals with a deeper supporting understanding of processes, models and a root–cause analysis about the underlying distribution challenges of engineered transformation mechanisms, catalyzed conversion pathways and selectivity would be beneficial to advance applied scientific development, bio-refining and manufacturing output amount. This review provides a summary, assessment and perspective for three important polymer-forming vinyl molecules, i.e. acrylic acid, methacrylic acid and styrene. These provide a backbone to produce acrylates, polystyrene, resins, rubbers, protective surface coatings, adhesives, textiles and other obtained copolymers. A succinct analytical overview on the thermo-catalytic intermediate routes for property-wise drop-in alternatives is presented. Sugars, acrolein, allyl alcohol, ethylbenzene, glycerol, 3-hydroxypropionic acid, isobutene, itaconic acid and lactic acid are considered as the main starting reactants. Catalysts span mixed metal oxides, silicates, native or impregnated zeolite frameworks (HBEA, HZSM, and MFI) and hetero-poly acids as well as homogeneous base hydroxides or platinum group metals, supported on carbon, alumina and sulfates. Finally, the article concludes with a brief state sum-up of the results, topics and opportunities for systematic future research or scaling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Heme compound II models in chemoselectivity and disproportionation reactions

Heme compound II models bearing electron-deficient and -rich porphyrins, [Fe IV (O)(TPFPP)(Cl)] – (1a) and [Fe IV (O)(TMP)(Cl)] – (2a), respectively, are synthesized, spectroscopically characterized, and investigated in chemoselectivity and disproportionation reactions using cyclohexene as a mechanistic probe. Interestingly, cyclohexene oxidation by 1a occurs at the allylic C–H bonds with a high kinetic isotope effect (KIE) of 41, yielding 2-cyclohexen-1-ol product; this chemoselectivity is the same as that of nonheme iron(IV)-oxo intermediates. In contrast, as observed in heme compound I models, 2a yields cyclohexene oxide product with a KIE of 1, demonstrating a preference for C=C epoxidation. The latter result is interpreted as 2a disproportionating to form [Fe IV (O)(TMP+˙)] + (2b) and Fe III (OH)(TMP), and 2b becoming the active oxidant to conduct the cyclohexene epoxidation. In contrast to 2a, 1a does not disproportionate under the present reaction conditions. DFT calculations confirm that compound II models prefer C–H bond hydroxylation and that disproportionation of compound II models is controlled thermodynamically by the porphyrin ligands. Other aspects, such as acid and base effects on the disproportionation of compound II models, have been discussed as well.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Organocatalysis in ring opening copolymerization as a means of tailoring molecular weight dispersity and the subsequent impact on physical properties in 4D printable photopolymers

Vat photopolymerization 3D printing has traditionally relied on free radical crosslinking between alkenes to produce non-degradable parts, which may have limited use in the biomedical and clinical spaces. Photopolymer resins containing functionalized degradable polymers, specifically polyesters, are greatly interesting for 3D printing tissue scaffolds and medical devices. Unfortunately, most polyesters produced for these applications have been made using metal-containing catalysts, which are not without risk for medical applications. Organocatalysis is a viable alternative route to achieving the same types of polyesters. Here, ring opening copolymerization (ROCOP) of allyl and cyclohexene-containing polyesters is examined using bipyridine and a guanidine-containing catalyst. The role of the catalysts, initiators, and cocatalysts are examined for bulk, open air ROCOP reactions. Unlike previous efforts with organocatalysis, the examined catalysts here could be used to tailor the dispersity of the polyesters, with ~10 kDa polyesters with dispersity ranging from 1.3 to 2.5 examined for the impact on rheological and thermomechanical properties related to resin/part behavior. The bipyridine catalysts and a thiourea cocatalyst further are shown, through the introduction of new fluorescence emissions of the purified polyesters. As a result, this work demonstrates that tuning the dispersity of polyester photopolymers provides a direct method of tailoring physical and optical properties in 3D/4D printable materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Gas-phase negative ion photoelectron spectroscopy and reactivity of phenylacetylide

Arylacetylides such as phenylacetylide (PhCC–, 1) are important nucleophiles used in synthetic chemistry yet rarely have they been studied as bare carbanions. In this work, the phenylacetylide anion was formed via electrospray ionization (ESI) or multistage mass spectrometry (MSn) experiments and subsequently examined in the gas phase by negative ion photoelectron spectroscopy (NIPES), ion-molecule reactions (IMR), alongside theoretical calculations to probe its fundamental structure and reactivity. Photoelectron spectra of PhCC– (1) revealed vertical (VDE) and adiabatic detachment energies (ADE), both of 3.220 eV. The latter value is also the electron affinity (EA) of the phenylethynyl radical (PhCC•) from which a bond dissociation energy (BDE) of phenylacetylene (PhCCH) was derived to be ca. 131.3 ± 1.7 kcal mol-1 using a gas-phase thermochemical cycle. Detachment of an electron from PhCC– at 266 nm likely results in resonant autodetachment, supported by Franck-Condon Factor (FCF) simulations. The phenylacetylide anion reacts with methyl iodide (CH3I) and allyl iodide (C3H5I) via SN2 nucleophilic displacement with measured rate coefficients of 4.29 and 3.66 × 10-10 cm3 molecule-1 s-1, respectively. The mechanisms associated with these displacement reactions are explained and understood in terms of the reaction kinetics, natural bond orbital (NBO) theory, and Density Functional Theory (DFT) calculations.

Ma, Howard Z.↗
DOE OSTI2020

Accurate prediction of core-level spectra of radicals at density functional theory cost via square gradient minimization and recoupling of mixed configurations

State-specific orbital optimized approaches are more accurate at predicting core-level spectra than traditional linear-response protocols, but their utility had been restricted due to the risk of "variational collapse" down to the ground state. We employ the recently developed square gradient minimization algorithm to reliably avoid variational collapse and study the effectiveness of orbital optimized density functional theory (DFT) at predicting second period element 1s core-level spectra of open-shell systems. Several density functionals (including SCAN, B3LYP, and ωB97X-D3) are found to predict excitation energies from the core to singly occupied levels with high accuracy (≤0.3 eV RMS error) against available experimental data. Higher excited states are, however, more challenging by virtue of being intrinsically multiconfigurational. We thus present a configuration interaction inspired route to self-consistently recouple single determinant mixed configurations obtained from DFT, in order to obtain approximate doublet states. This recoupling scheme is used to predict the C K-edge spectra of the allyl radical, the O K-edge spectra of CO + , and the N K-edge of NO 2 with high accuracy relative to experiment, indicating substantial promise in using this approach for the computation of core-level spectra for doublet species [vs more traditional time dependent DFT, equation of motion coupled cluster singles and doubles (EOM-CCSD), or using unrecoupled mixed configurations]. Finally, we also present general guidelines for computing core-excited states from orbital optimized DFT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗