Search NASA⌕ Search

SEARCH · Search NASA

Results for “amorphous carbon”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Low temperature and limited water activity reveal a pathway to magnesite via amorphous magnesium carbonate

Forsterite carbonated in thin H 2 O films to magnesite via amorphous magnesium carbonate during reaction with H 2 O-bearing liquid CO 2 at 25 °C. This novel reaction pathway contrasts with previous studies that were carried out at higher H 2 O activity and temperature, where more highly hydrated nesquehonite was the metastable intermediate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Affinity for OH – Produces Four-Coordinated Zn 2+ Impurities in Hydrated Amorphous Calcium Carbonate

Using ab initio based molecular dynamics and electronic structure calculations, we show that Zn impurities in hydrated amorphous calcium carbonate (ACC) have a much lower coordination number than other divalent impurities due to covalent interactions between the 3d Zn shell and the oxygen atoms of the carbonate and water groups. Further, the local structure around Zn in ACC, including the predicted low coordination number, is confirmed by X-ray absorption spectroscopy of synthetic Zn-bearing ACC. The strong Zn–O chemical interaction leads to substantial water dissociation and slightly disrupts the hydrogen bonding network. Implications of Zn 2+ incorporation for ACC stability are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Equation of state measurement of detonation carbon condensates using optical microscopy and interferometry

Thermochemical models of detonation that estimate performance (e.g., detonation velocity, energy delivery, etc.), are based on assumptions that carbon condensates (soot) formed during detonation is largely similar to bulk carbon. However, soot constituents can range from amorphous carbon to nanodiamond and include other material phases. Since thermodynamic properties of the soot such as compressibility are imperative for accurate thermochemical modeling of detonation reaction chemistry, experimental measurements of the equation of state (EOS) which determine the compressibility are vital. Due to the mixed-phase nature of detonation soot, typical methods to measure the EOS (e.g., x-ray diffraction) are untenable. In this study, the high-pressure EOS up to 20 GPa was determined for detonation soot collected from PBX 9502, Composition B (Comp B), Hexanitrostilbene (HNS), and LX-21 high explosives by employing a direct volume technique using optical microscopy and interferometry in a diamond anvil cell. Comp B soot was determined to be the least compressible [K 0 = 57.9(17) GPa] with HNS soot [K 0 = 53.7(15) GPa], LX-21 soot [K 0 = 45.8(51) GPa], and PBX 9502 soot [K 0 = 28.2(27) GPa] being more compressible, likely due to differences in nanodiamond content as compared to amorphous carbon and graphite content.

Amorphous materials↗
DOE OSTI2026

Alginate–Amorphous Calcium Carbonate Hydrogels for Controlled Therapeutic Release

Alginate hydrogels are widely explored as biocompatible matrices for transdermal delivery of therapeutic compounds but burst release and mechanical stability remain persistent challenges in drug delivery systems. This experimental study investigated alginate–amorphous calcium carbonate (ACC) hydrogel composites designed to regulate release of model anti-inflammatory compound, ibuprofen. Hydrogels containing 1.6–2.0 wt% sodium alginate were crosslinked with CaCl₂ and combined with ACC through two incorporation pathways: (i) separate addition of ACC and ibuprofen or (ii) co-precipitation of ACC onto ibuprofen prior to hydrogel incorporation. Hydrogels without ACC served as Control. Biocomposite structure and properties were characterized and release profiles quantified using Korsmeyer–Peppas (KP) model.Burst release was curbed as crosslinking time increased, highlighting importance of network density in diffusion control. Co-precipitating ACC with ibuprofen prior to incorporating into the hydrogel suppressed burst release and sustained release for > ~72 h. Rheological measurements indicate ACC reinforces hydrogel network, increasing storage modulus while maintaining hydration and flexibility. KP model indicates release is diffusion-controlled, with deviations reflecting contributions from diffusion barriers and morphologic/structural changes near the ACC coated ibuprofen. ACC within alginate hydrogels provides a strategy for tuning drug release while preserving mechanical properties relevant to transdermal applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The nano- and meso-scale structure of amorphous calcium carbonate

Abstract Understanding the underlying processes of biomineralization is crucial to a range of disciplines allowing us to quantify the effects of climate change on marine organisms, decipher the details of paleoclimate records and advance the development of biomimetic materials. Many biological minerals form via intermediate amorphous phases, which are hard to characterize due to their transient nature and a lack of long-range order. Here, using Monte Carlo simulations constrained by X-ray and neutron scattering data together with model building, we demonstrate a method for determining the structure of these intermediates with a study of amorphous calcium carbonate (ACC) which is a precursor in the bio-formation of crystalline calcium carbonates. We find that ACC consists of highly ordered anhydrous nano-domains of approx. 2 nm that can be described as nanocrystalline. These nano-domains are held together by an interstitial net-like matrix of water molecules which generate, on the mesoscale, a heterogeneous and gel-like structure of ACC. We probed the structural stability and dynamics of our model on the nanosecond timescale by molecular dynamics simulations. These simulations revealed a gel-like and glassy nature of ACC due to the water molecules and carbonate ions in the interstitial matrix featuring pronounced orientational and translational flexibility. This allows for viscous mobility with diffusion constants four to five orders of magnitude lower than those observed in solutions. Small and ultra-small angle neutron scattering indicates a hierarchically-ordered organization of ACC across length scales that allow us, based on our nano-domain model, to build a comprehensive picture of ACC formation by cluster assembly from solution. This contribution provides a new atomic-scale understanding of ACC and provides a framework for the general exploration of biomineralization and biomimetic processes.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Mechanochemical formation of highly stable amorphous calcium carbonate in calcium silicates: Potential long-term storage of CO 2 in cement

Here, we have investigated mechanochemical reactions with the calcium silicate wollastonite to probe potential mechanisms of sequestration and long-term storage of CO 2 as mineral carbonates in cement pastes. Wollastonite, CaSiO 3 , was milled under ambient and 13 C enriched CO 2 atmospheres. Milling induced a structure change from monoclinic wollastonite-2M to triclinic-1T, consistent with high pressure treatment. The results from solid-state 13 C nuclear magnetic resonance (NMR) spectroscopy shows this process forms an extraordinarily stable amorphous calcium carbonate (ACC) phase that remains despite a high temperature dehydration treatment (130 °C) and persists in the same form after 3 yrs. of storage at ambient conditions. Thermogravimetric analysis (TGA) of these samples indicates that ACC is produced at the similar solid concentrations in both CO 2 -enriched and ambient atmospheres. The observation of meta-stable ACC due to wollastonite carbonation may play an important role in further exploration and optimization of mineral carbonation reactions for CO 2 capturing cement formulations.

13C solid-state NMR↗
DOE OSTI2025

Soft Nanoconfinement Nucleates and Stabilizes Ultrasmall Amorphous Calcium Carbonate from Aggregation

Organisms use soft confinement structures, such as vesicles and compartments, to direct the nucleation of calcium carbonate (CaCO 3 ) and its subsequent processes during biomineralization. Despite recent efforts elucidating confinement’s effects on CaCO 3 polymorph selection, we still poorly understand how the size and distribution of CaCO 3 are controlled within soft confinement. Here, using a size-controlled nanoemulsions system made from isooctane, Span 80, Tween 80, and aqueous solutions, we studied CaCO 3 formation in soft confinement. Small angle X-ray scattering (SAXS) confirmed that a 72 nm aqueous core in nanoemulsions served as the confined space for CaCO 3 formation. Unlike the ~ 50 nm CaCO 3 particles that formed in the unconfined solution, small angle neutron scattering (SANS) and transmission electron microscope (TEM) showed that ultrasmall and amorphous calcium carbonate precipitated within soft confinement and did not exhibit any aggregation/coalescence of nanoparticles even after 24 hrs of reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Grafted nickel-promoter catalysts for dry reforming of methane identified through high-throughput experimentation

High-throughput synthesis of a series of monometallic and bimetallic catalysts (45 bimetallic and 50 monometallic samples) consisting of nickel and one of nine different metal promoters (B, Co, Cu, Fe, Mg, Mn, Sn, V and Zn) supported on one of six different metal oxides alumina, ceria, magnesia, silica and titania) is carried out via organometallic grafting using a robotic platform. The catalysts are evaluated for their activity and selectivity for the dry reforming of methane at a feed ratio of CH 4 :CO 2 of 1 at 650–800 °C in a parallel flow reactor system. The type of oxide support prevails over the type of additive for both catalyst activity and stability. On Al 2 O 3 and MgO, Fe was found to be the best promoter; on SiO 2 , Cu is the best promoter at 700 °C and higher, while on TiO 2 , Mn is found to enhance the conversion at 800 °C. On CeO 2 , all additives except Fe have beneficial effects. Twenty-five catalysts show > 90% methane conversion with ten catalysts showing > 95% conversion at 800 °C with the H 2 :CO ratios ranging from 0.8 to 1.2. Amongst the ten highest performers, NiFe/Al 2 O 3 and NiFe/MgO are more active than Ni/Al 2 O 3 and Ni/MgO, respectively and were stable over a period of 25 h at 800 °C. Characterization on the as-prepared samples reveals highly dispersed phase, while after reduction in H 2 , highly dispersed and reduced nickel particles up to 10 nm are formed. The particles do not increase in size under dry reforming reaction conditions at 800 °C. An increased hydrogen consumption observed during H 2 -TPR of the nickel particles is positively correlated with methane conversion for Al 2 O 3 -based catalysts. The resistance to deactivation by coking and variation in coke structure are investigated by spectroscopic and microscopic methods to identify the relationship between metal promoters, alloy formation, and type of surface carbon deposits. Carbon whiskers were observed on the ten selected spent samples and are preferentially deposited on Ni rather than on the promoters. Carbon nanotube formation and metal particle removal from support were not observed to cause deactivation while amorphous carbon formation was clearly linked to catalyst deactivation, as amorphous carbon could encapsulate nickel, either on the support or at the end of the carbon nanotube. Furthermore, the organometallic grafting technique is an efficient and suitable technique for synthesizing highly dispersed and homogeneous phases which lead to high conversion and high durability for dry reforming of methane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Comparison of water nanodroplet properties on different graphite-based substrates

The molecular structure and dynamics of water differ considerably at various interfaces. We compare the interfacial water structure–property relationship on three different carbon substrates, namely, amorphous carbon, compressed expanded natural graphite, and pure graphite by utilizing atomistic molecular dynamics simulations. The effect of different substrates on the structural and dynamical properties of water can readily be observed. Here, the density distributions parallel and normal to the substrates show oblate droplet structures. The normal to the substrate water distribution shows a strong hydration layer at the interface that does not vary with substrates. However, the disparity in the structure and dynamics on three different substrates shows that the surface morphologies of the substrates are critical for determining nanoscale water properties. Furthermore, it is observed that the formation of an interfacial water layer or the hydration layer is a direct consequence of both water “confinement” at the nanoscale and “attraction” between water molecules and the carbon substrates.

42 ENGINEERING↗
DOE OSTI2025

Inkless, dry printing nanographene via in-Situ Coordinated laser ablation and sintering processes

Printing carbon, such as graphene and other carbon structures, for flexible and printed electronics currently relies on either ink-based printing, laser-induced forward transfer (LIFT), or laser-induced graphitization (LIG) to convert carbon-rich precursor materials, such as polymers, to graphene-like carbon structures. Liquid inks contain toxic solvents, surfactants, and stabilizing additives that degrade electrical conductivity and require high-temperature post-processing. On the other hand, LIG is limited by the substrate. Here, this study introduces an additive manufacturing method for dry-printing carbon nanomaterials, ranging from amorphous carbon to crystalline graphene-like structures, on various substrates. The system utilizes laser ablation of a solid graphite target to create pure carbon nanoparticles in situ and on demand. An inert gas carries the nanoparticles onto the substrate, where they can be deposited either as amorphous structures or laser-sintered in real time to form various graphitic structures. The study of laser processing parameters, specifically fluence and pulse repetition frequency, revealed three unique regimes of nanostructure evolution that influence the morphological and electrical properties of these printed structures. Raman spectroscopy confirmed graphitization with a resistivity slightly higher than that of the bulk graphite target. The conductivity/resistivity could be tuned as a function of sintering laser power. Scanning transmission electron microscopy (STEM) revealed that turbostratic nanographene formed with an interlayer spacing of 0.40 nm. Despite ink-based printing methods, such as screen printing, inkjet printing (IJP), and aerosol jet printing (AJP), this eco-friendly and green manufacturing technique could eliminate toxic chemicals, reduce environmental impact, and enable single-step fabrication of carbon-based devices for applications in wearable sensors, energy storage, flexible electronics, and Internet of Things (IoT) devices.

Additive nanomanufacturing↗
DOE OSTI2022

Raman signatures of detonation soot

Soot generated from the detonation of nine explosives was investigated with Raman microspectroscopy and high-resolution transmission electron microscopy (HRTEM). The first order bands, located at approximately 1,580 (G), 1,350 (D1), 1,620 cm –1 (D2), 1,500 (D3), and 1,200 (D4), are used to provide information on the carbon allotropes and defects. The intensity ratios and the full-width at half-maximum provide an indication of the disorder in the material. The Raman spectra of soot acquired from the detonation of nine explosives showed differences which can be used to identify the precursor explosive. Overall, most differences in the spectra were correlated with the presence of amorphous carbon in the soot. In additional to identification of distinct bands in the spectra via deconvolution, principal component analysis was also used to differentiate the different types of soot. HRTEM performed on soot samples with different explosive precursors identified several distinct allotropes of carbon such as nanodiamonds, carbon onions, graphite fibers, and amorphous carbon.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2021

Probing thermal conductivity of subsurface, amorphous layers in irradiated diamond

In this study, we report on the thermal conductivity of amorphous carbon generated in diamond via nitrogen ion implantation (N 3+ at 16.5 MeV). Here, transmission electron microscopy techniques demonstrate amorphous band formation about the longitudinal projected range, localized approximately 7 μm beneath the sample surface. While high-frequency time-domain thermoreflectance measurements provide insight into the thermal properties of the near-surface preceding the longitudinal projected range depth, a complimentary technique, steady-state thermoreflectance, is used to probe the thermal conductivity at depths which could not otherwise be resolved. Through measurements with a series of focusing objective lenses for the laser spot size, we find the thermal conductivity of the amorphous region to be approximately 1.4 W m –1 K –1 , which is comparable to that measured for amorphous carbon films fabricated through other techniques.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Plasma-assisted atomic layer etching of single-crystal diamond

Applications of near-surface nitrogen-vacancy (NV) centers in diamond are often limited by surface defects created during processing. Understanding and controlling plasma-induced surface damage is important for preserving the optical and spin properties of diamond NV centers. We report molecular dynamics simulations of a novel form of plasma-aided atomic layer etching of diamond. In this proposed scheme, the initial surface modification step consists of Ar + ion bombardment. This creates an amorphous layer at the surface, the thickness of which is controlled by the ion energy. Amorphization is known to help smooth the surface, at least locally, and would also serve to sputter clean an initially contaminated surface. A second step impacts the amorphous carbon layer with O + between about 1 and 5 eV. Simulations show that this energy range will remove the amorphous carbon but will not etch the underlying diamond. Though this energy range is not trivial to achieve in a conventional low-temperature plasma, potential methods for creating these low-energy O + ions are discussed. In addition to a-C etching, the O + impacts are predicted to remove any isolated (100) diamond terraces by selectively attacking the edges of the terraces. The proposed atomic layer etching (ALE) approach reverses the conventional ALE sequence in which the surface modification step is usually chemical modification (oxidation in this case), followed by a removal step using Ar + impacts. This plasma ALE procedure is predicted to create a diamond surface that is atomically flat and defect free.

Draney, J. S. [Princeton University, NJ (United St↗
DOE OSTI2021

Tribocatalytically-activated formation of protective friction and wear reducing carbon coatings from alkane environment

Minimizing the wear of the surfaces exposed to mechanical shear stresses is a critical challenge for maximizing the lifespan of rotary mechanical parts. In this study, we have discovered the anti-wear capability of a series of metal nitride-copper nanocomposite coatings tested in a liquid hydrocarbon environment. The results indicate substantial reduction of the wear in comparison to the uncoated steel substrate. Analysis of the wear tracks indicates the formation of carbon-based protective films directly at the sliding interface during the tribological tests. Raman spectroscopy mapping of the wear track suggests the amorphous carbon (a-C) nature of the formed tribofilm. Further analysis of the tribocatalytic activity of the best coating candidate, MoN-Cu, as a function of load (0.25–1 N) and temperature (25 °C and 50 °C) was performed in three alkane solutions, decane, dodecane, and hexadecane. Results indicated that elevated temperature and high contact pressure lead to different tribological characteristics of the coating tested in different environments. The elemental energy dispersive x-ray spectroscopy analysis and Raman analysis revealed formation of the amorphous carbon film that facilitates easy shearing at the contact interface thus enabling more stable friction behavior and lower wear of the tribocatalytic coating. These findings provide new insights into the tribocatalysis mechanism that enables the formation of zero-wear coatings.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Integrating Machine Learning Potential and X-ray Absorption Spectroscopy for Predicting the Chemical Speciation of Disordered Carbon Nitrides

Precise determination of atomic structural information in functional materials holds transformative potential and broad implications for emerging technologies. Spectroscopic techniques, such as X-ray absorption near-edge structure (XANES), have been widely used for material characterization; however, extracting chemical information from experimental probes remains a significant challenge, particularly for disordered materials. We present an integrated approach that combines atomic simulations, data-driven techniques, and experimental measurements to investigate chemical speciation of amorphous carbon nitride systems as a case study. Here, we discuss the development of machine learning potentials that can efficiently explore the vast configuration space of amorphous carbon nitrides. By employing statistical methods, this structural database enables the elucidation of the most representative local structures and how they evolve with chemical compositions and density. Density functional theory simulations are used to establish a correlation between the local structure and spectroscopic signatures, which then serve as the basis for interpreting and extracting chemical content from experimental data. Although our framework is specifically demonstrated for XANES and carbon nitrides, the approach described herein is readily adaptable as applied to other experimental characterization probes and materials classes.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Interfacial Reactivity of Silicon Electrodes: Impact of Electrolyte Solvent and Presence of Conductive Carbon

Silicon (Si) is a promising high-capacity material for lithium-ion batteries; however, its limited reversibility hinders commercial adoption. Approaches such as particle and crystallite size reduction, introduction of conductive carbon, and use of different electrolyte solvents have been explored to overcome these electrochemical limitations. Herein, operando isothermal microcalorimetry (IMC) is used to probe the influence of silicon particle size, electrode composition, and electrolyte additives fluoroethylene carbonate and vinylene carbonate on the heat flow during silicon lithiation. In this work, the IMC data are complemented by X-ray photoelectron and Raman spectroscopies to elucidate differences in solid electrolyte interphase (SEI) composition. Nanosized (~50 nm, n-Si) and micrometer-sized (~4 μm, μ-Si) silicon electrodes are formulated with and without amorphous carbon and electrochemically lithiated in ethylene carbonate (EC), fluoroethylene carbonate (FEC), or vinylene carbonate (VC) based electrolytes. Notably, n-Si electrodes generate 53–61% more normalized heat relative to their μ-Si counterparts, consistent with increased surface area and electrode/electrolyte reactivity. Introduction of amorphous carbon significantly alters the heat flow profile where multiple exothermic peaks and increased normalized heat dissipation are observed for all electrolyte types. Notably, the VC-containing electrolyte demonstrates the greatest normalized heat dissipation of the electrode compositions tested showing as much as a 50% increase compared to the EC or FEC counterparts. The results are relevant to the understanding of silicon negative electrode function in the presence of electrolyte additives and provide insight relative to silicon containing cell reactivity and safety.

25 ENERGY STORAGE↗
DOE OSTI2020

Controlled One‐pot Synthesis of Nickel Single Atoms Embedded in Carbon Nanotube and Graphene Supports with High Loading

Abstract Single‐atom catalysts (SACs) have attracted much attentions due to the advantages of high catalysis efficiency and selectivity. However, the controllable and efficient synthesis of SACs remains a significant challenge. Herein, we report a controlled one‐pot synthesis of nickel single atoms embedded on nitrogen‐doped carbon nanotubes (NiSA−N−CNT) and nitrogen‐doped graphene (NiSA−N−G). The formation of NiSA−N−CNT is due to the solid‐to‐solid rolling up mechanism during the high temperature pyrolysis at 800 °C from the stacked and layered Ni‐doped g‐C 3 N 4 , g‐C 3 N 4 −Ni structure to a tubular CNT structure. Addition of citric acid introduces an amorphous carbon source on the layered g‐C 3 N 4 −Ni and after annealing at the same temperature of 800 °C, instead of formation of NiSA−N−CNT, Ni single atoms embedded in planar graphene type supports, NiSA−N−G were obtained. The density functional theory (DFT) calculation indicates the introduction of amorphous carbon source substantially reduces the structure fluctuation or curvature of layered g‐C 3 N 4 ‐Ni intermediate products, thus interrupting the solid‐to‐solid rolling process and leading to the formation of planar graphene type supports for Ni single atoms. The as‐synthesized NiSA−N−G with Ni atomic loading of ∼6 wt% catalysts shows a better activity and stability for the CO 2 reduction reaction (CO 2 RR) than NiSA−N−CNT with Ni atomic loading of ∼15 wt% due to the open and exposed Ni single atom active sites in NiSA−N−G. This study demonstrates for the first time the feasibility in the control of the microstructure of carbon supports in the synthesis of SACs.

Zhao, Shiyong↗
DOE OSTI2022

Prospective Life Cycle Assessment of Synthetic Graphite Manufactured via Electrochemical Graphitization

Lithium-ion batteries (LIBs) are expected to play a crucial role in meeting many of the clean energy-related goals. Due to its electrical properties such as good conductance, chemical inertness, and corrosion resistance, graphite is a very popular anode for LIBs. Traditional methods of producing battery-grade graphite (high purity >99%) include processing naturally mined graphite or manufacturing synthetic graphite via the Acheson process, which converts soft amorphous carbons such as petroleum coke into graphite by subjecting it to high temperature (up to 3000 °C) for prolonged periods of times (3–5 days). However, due to a lack of abundant high purity natural graphite sources, synthetic graphite is the preferred choice for many LIBs. A new synthetic electrochemical graphitization method that subjects the amorphous carbon precursor submerged in a molten salt mixture to a constant cathodic polarization (against a graphitic anode) has been discovered that has significantly lower graphitization temperatures (~800 °C) and reduced graphitization time (3–6 h). Furthermore, the method can accept a higher variety of carbon precursors compared to the Acheson process. A prospective life cycle assessment (LCA) is conducted on this new method and compared against the traditional processes. The laboratory-scale demonstration of the method is used to build an inventory, which through various assumptions is scaled up to a commercial scale. An additional scenario is also considered with a biomass-derived carbon precursor for the graphite. The results from the LCA show that while the laboratory scale process is similar to the Acheson process and natural flake graphite in terms of impact, the scaled-up process is drastically better than the Acheson process in all environmental categories. Using a coconut shell-derived biomass precursor has a higher impact due to its manufacturing in Indonesia, as the Indonesian energy grid is highly fossil fuel dependent. Therefore, the biomass carbon may have a higher impact than petroleum coke dependent on the location of production of biomass-derived carbon black. The LCA has identified the molten salt—CaCl 2 —as a potential hotspot and suggests other salts should be considered. Accordingly, the new method shows promise in this early stage LCA in improving the environmental performance of graphite (and by relation LIBs) and therefore needs to be explored more in terms of its commercial viability.

25 ENERGY STORAGE↗