Search NASA⌕ Search

SEARCH · Search NASA

Results for “antenna systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

A decoupling approach to the control of large spaceborne antenna systems

A simple practical method for designing antenna-feed positioning control systems for large deployable spaceborne antenna systems with flexible booms is proposed. The approach is based on the mechanical decoupling of the antenna-feed from the boom so that the positioning control system can be designed without taking boom dynamics into consideration, thus avoiding a complex infinite dimensional control problem. The basic idea is illustrated by a simple angular positional control system attached to a flexible boom restricted to torsional motion only. The application of this approach to more complex situations is discussed briefly.

Wang, P. K. C.↗
NASA NTRS1983

A large antenna system flight experiment

The design and development of large antenna systems are discussed. The validation objectives and techniques of the structural behavior of the system are outlined along with studies of the dynamics, deployment, and unpacking. The validation of flexible control and system performance are also considered.

Soosaar, K.↗
NASA NTRS1993

A Satellite-Tracking K and Ka Band Mobile Vehicle Antenna System

This paper describes the development of the K/Ka-band, satellite-tracking mobile-vehicular antenna system for NASA's ACTS Mobile Terminal (AMT) project. ACTS is NASA's Advanced Communications Technology Satellite, which will be launched into its geostationary orbit in 1993.

Antenna System↗
NASA NTRS1968

Computer program aids dual reflector antenna system design

Computer program aids in the design of maximum efficiency dual reflector antenna systems. It designs a shaped cassegrainian antenna which has nearly 100 percent efficiency, and accepts input parameters specifying an existing conventional antenna and produces as output the modifications necessary to conform to a shaped design.

Firnett, P.↗
NASA NTRS1983

Shaped reflector beam waveguide and high gain antenna systems

In this paper the problem of synthesizing dual reflector antennas for both amplitude and phase control of the final aperture distribution is discussed. An approximate procedure for the offset synthesis problem is presented and applications of the procedure to the shaping of beam waveguides and reflectors for high-gain antenna systems are illustrated.

Galindo-Israel, V.↗
NASA NTRS1988

Switched steerable multiple beam antenna system

A steerable multibeam five element cross-feed cluster antenna system is described. The feed power is divided into five branches. Each branch includes a switching network comprised of a plurality of time delay elements each individually controlled by a respective electromagnetic latching switch. Frequency independent individual two-dimensional beam steering at intermediate (IF) scanning frequencies is thereby provided wherein discrete incremental time delays are introduced by the switching networks into each branch and the signals recombined thereafter to form each beam. The electromagnetic latched switching reduces power consumption and permits higher power switching and reciprocal coincident tranmsit and receive operation. Frequency independence due to incremental time delay switching permits coincident reciprocal operation and steering for transmit-receive signal paths carrying different transmit-receive frequencies. Diagonal quarter wave plates in the waveguides alter polarization from the circular to orthogonal linear to provide transmitter-receiver isolation.

Richard S Iwasaki↗
NASA NTRS1972

Computer controlled antenna system

The application of small computers using digital techniques for operating the servo and control system of large antennas is discussed. The advantages of the system are described. The techniques were evaluated with a forty foot antenna and the Sigma V computer. Programs have been completed which drive the antenna directly without the need for a servo amplifier, antenna position programmer or a scan generator.

Raumann, N. A.↗
NASA NTRS1994

Noise Temperature Contribution of a Dichroic Plate in a Beam-Waveguide Antenna System

A 34m diameter antenna, built for NASA/JPL in 1990 at Goldstone, California, utilizes a beam-waveguide (BWG) design. It was discovered that if a dichroic plate is installed in a BWG antenna environment, high noise temperatures can result if the receiver system passband is greater than the passband for which the plate was designed. A method is presented for accurately calculating dichroic plate noise temperature for these conditions.

Dichroic Plate Beam-Waveguide Antenna↗
NASA NTRS1964

Investigation and study of a multi-aperture antenna system final report, 1 jan. - 1 apr. 1964

This investigation was concerned with a multiple aperture adaptive antenna system for application to receiving telemetered data from remote space vehicles or satellites. The primary criterion for determining the feasibility of such a system has been economic considerations, but of necessity many physical constraints imposed on both a single antenna and a multiple aperture system have been evaluated. These include such factors as acquisition and combining of signals, look angle, shadowing, propagation influences system spatial bandwidth, collimation, interference, doppler effects, reliability, and noise. Specific conclusions have been made for a system operating at a frequency of 2 Gc, but the system model adopted allows quick evaluation at other frequencies. At a frequency of 2Gc, the crossover point between a single antenna or a multiple aperture configuration occurs for an 85 foot reflector. However this transition region is not critical. For lunar range communications a single antenna appears to be the most economical, whereas at interplanetary ranges aperture equivalents of around 400 feet are required and achieved by arraying eight 142 foot antennas.

TELEMETRY↗
NASA NTRS1982

Radiometer mission requirements for large space antenna systems

Requirements are defined for Earth observational microwave radiometry using large space antenna systems with apertures in the 50 to 200 meter range. General Earth observational needs, specific measurement requirements, orbital mission guidelines and constraints, and general radiometric requirements are defined. Specific measurements include soil moisture, water surface temperature, water roughness, ice boundaries, salinity, and water pollutants. Measurements with 10 to 1 km spatial resolution and 3 to 1 day temporal resolution are required.

Keafer, L. S., Jr.↗
NASA NTRS1988

MSAT-X electronically steered phased array antenna system

A low profile electronically steered phased array was successfully developed for the Mobile Satellite Experiment Program (MSAT-X). The newly invented cavity-backed printed crossed-slot was used as the radiating element. The choice of this element was based on its low elevation angle gain coverage and low profile. A nineteen-way radial type unequal power divider and eighteen three-bit diode phase shifters constitute the beamformer module which is used to scan the beams electronically. A complete hybrid mode pointing system was also developed. The major features of the antenna system are broad coverage, low profile, and fast acquisition and tracking performance, even under fading conditions. Excellent intersatellite isolation (better than 26 dB) was realized, which will provide good quality mobile satellite communication in the future.

Chung, H. H.↗