Search NASA⌕ Search

SEARCH · Search NASA

Results for “aqueous reprocessing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

IODINE ADSORPTION IN FIXED BED ADSORBER TESTS

I-129 emissions control is needed for used fuel aqueous reprocessing. I-129 capture has been studied for 40 years; Two sorbents tested in recent years – Silver Zeolite (AgZ) and silver-functionalized Aerogel (AGAero). Results show needed iodine adsorption efficiencies are possible, DFs up to10,000. Mass transfer zone (MTZ) depths ~2 in. for I2 and 8 in. for CH3I, but increase over time; deeper sorbent beds needed for efficient CH3I capture. Ag utilization between 10-70% for most test durations; lower for higher NOx. Iodine sorption capacities: ~10 g/100 AgZ and ~20 g/100 g AgAero; lower for high NOx. Nearly all adsorbed I was physisorbed iodine for I2 and CH3I.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Python Package for Fuel Cycle and Waste Management Analysis - 19545

The future of nuclear power utilization in the United States may involve a transition from the once-through light water reactor fuel cycle to a so-called advanced fuel cycle. An advanced fuel cycle may offer improvements in natural resource utilization, reactor safety, and environmental impact. In addition, adoption of an advanced fuel cycle will result in changes in the amount, composition, and disposal of the nuclear wastes they produce. Characteristics intrinsic to the wastes themselves, such as mass and radioactivity at specific times, were used as waste management metrics in the Department of Energy 2014 Fuel Cycle Evaluation and Screening (FCES) study. Binning of these metrics informed fuel cycle according to relative potential benefit. However, waste properties alone cannot qualify management strategy. Therefore, comparing fuel cycles from the perspective of waste management can provide additional insights. To that end, an object-oriented Python package has been developed to perform fuel cycle waste management calculations. The package, named nwpy (short for Nuclear Waste analysis in Python), mimics the mass flow operations reported in the FCES study and interfaces with the ORIGEN-S code to assess metric data as reported in the FCES. In addition, this Python package determines the loading of waste streams into forms suitable for final disposal in a geological repository and uses such data for repository performance assessment. This work describes the Python package methodology, assumptions, and capabilities. As input data, the package requires information about the fuel cycle such as the mass of fuel discharged, the cooling time between reactor discharge and subsequent operations, and the separations process efficiencies and waste forms it produces. In addition, the isotopic composition of the reactor discharge stream, such as that available from the FCES database, is required. With that, it can perform prescribed mass flow and decay operations throughout the back end of the fuel cycle, the latter carried out by the ORIGEN-S code distributed with the SCALE6.2 software suite. The result is time-dependent data characterizing the waste on a per-package basis. Package loading for waste streams depends on the stream form (i.e. UNF vs. HLW, or glass HLW from aqueous reprocessing vs. ceramic HLW from electrochemical processing) and is based on literature review and engineering assumption. As an example of the application of the code, calculations for the areal footprint of direct-contact repositories for different fuel cycles is shown. Development is ongoing, and the package is expected to grow incorporating capabilities for waste management analyses such as waste transportation and radionuclide transport through the biosphere. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Advanced Fuel Cycle Cost Basis Report: Module D1-2 LWR Pelletized MOX Fuel Fabrication

Nature of this 2021 Module update from previous AFC-CBRs: Use of U,Pu MOX life cycle cost data from late 1970s Non-proliferation Assessment Systems Analysis Program (NASAP). This archived data has been updated in 2018-2019 to reflect today’s regulatory and economic conditions and is presented in 2017. For the lower unit cost MOX fabrication case the PuO 2 from the reprocessed LWR SNF is assumed to be fabricated immediately after aqueous PUREX reprocessing, thus minimizing the time for undesirable actinide radioisotopes, from the standpoint of radiation safety, to build in. Fabricated MOX utilizing separated and multi-year stored Pu from aqueously reprocessed SNF has also been added to this Module as a second LWR MOX fabrication variant, requiring additional and more costly glovebox design and operations to protect personnel. This new NASAP-informed data augments historical data and unit cost projections appearing in the 2009 (Shropshire et al 2009), 2012 (Dixon et al 2012), and 2017 Dixon et al 2017) AFC-CBRs. The “What-it-takes” 2017 unit fabrication cost values based on the updated NASAP studies are escalated to 2020$ for this 2021 Update Report.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Brief Review of Technologies for Separating Tritium from the Aqueous Effluent of Reprocessing Plants

The scope of this letter report encompasses a review of technologies applicable to separating tritiated water from light and heavy water with a focus on wastewater arising from the reprocessing of UNF. Reports considering flowsheet options for tritium management are also reviewed. The main objective of this letter report is to support consideration of programmatic opportunities for the Materials Recovery and Waste Form Development (MRWFD) Campaign within the Department of Energy’s Office of Nuclear Energy.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Nuclear Fuels and Reprocessing Technologies: A U.S. Perspective

Reprocessing and/or waste management issues are of concern to the “back end” of the nuclear fuel cycle. Of course, there are a great many “nuclear fuel cycle” scenarios to consider; if not in practice, then at least in theory. The simplest conceptually is the “once through” fuel cycle in which the spent fuel is discarded. The more complex fuel cycle scenarios involve reprocessing spent nuclear fuels and a family of nuclear reactor technologies to accommodate burning and breeding for various military and commercial needs. Therefore, the selection of a specific “fuel cycle” is what ultimately imposes the engineering requirements of the reprocessing and waste management technologies. No one part is independent of the other parts in a fuel cycle flowsheet; all parts are fully integrated. This paper presents a summary of radiochemical processes, nuclear reactor technologies, nuclear fuel types, and the reprocessing technologies that serve the different nuclear fuel types. Comprehending how this series of topics are related to each other is a prerequisite to understanding the requirements of any reprocessing strategy. The summary materials presented here are selective, as opposed to comprehensive. More detailed information on any one subject can be found in the reference materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Improvements to neutron detection of Pu in solvent for an aqueous buffer tank, magnox reprocessing plant, Sellafield - 14216

The PP Active Feed Tank (PPAFT) is a buffer tank that is not safe by geometry and which is located between the Medium Active (MA) and Plutonium Purification (PP) cycles of the chemical separation process in the Magnox Reprocessing Plant. The PPAFT receives Pu nitrate in acid which has been conditioned ready for the extraction of Pu with TBP/OK (tri-butyl phosphate in kerosene) solvent in the PP Cycle. The criticality safety case for the PPAFT recognises that during both normal operations and potential maloperations solvent which is dissolved (TBP which is present in solution but can be released upon a change in acidity) and entrained (TBP/OK physically carried over but not in solution) will accumulate in the PPAFT. The only practicable route out for Pu in solvent in the PPAFT is the normal process route out from the base of the PPAFT to the PP cycle through intermediate vacuum lift and feed vessels. However, the dished end base of the PPAFT and the intermediate vacuum lift and feed vessels are of particularly challenging geometry. There are five neutron monitors placed around the PPAFT for the detection of Pu in solvent. The original design intent of the neutron detection system was that any single monitor should be able to reveal an accumulation of Pu in solvent before it would potentially be unsafe if fed downstream. However, over time there have been changes to the fuel feed and chemical process of the plant which have had the potential to affect the performance of the neutron monitoring system. The ability of the neutron monitoring system to function to its original intent was questioned. Work has recently been carried out to investigate the capabilities of the PPAFT neutron monitoring system for current plant conditions and to identify potential improvements while making best use of the existing neutron monitors. It was found that moving a neutron monitor from the side to the top of the PPAFT and adding alarms based on the ratio of signals from multiple neutron detectors would be effective in improving detection of Pu in solvent. This paper describes the challenges involved in detecting thin layers of Pu in solvent using neutron monitors, discusses the improvements made to the PPAFT neutron monitors and details the combination of real plant data and modelling with the shielding code MCBEND used to provide confidence in the enhanced neutron monitoring system. (author)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Organic Iodine Adsorption by AgZ under Prototypical Vessel Off-Gas Conditions

U.S. regulations will require the removal of 129 I from the off-gas streams of any used nuclear fuel (UNF) reprocessing plant prior to discharge of the off-gas to the environment. Multiple off-gas streams within a UNF reprocessing plant combine prior to release, and each of these streams contains some amount of iodine. For an aqueous UNF reprocessing plant, these streams include the dissolver off-gas, the cell off-gas, the vessel off-gas (VOG), the waste off-gas and the shear off-gas. To achieve regulatory compliance, treatment of multiple off-gas streams within the plant must be performed. Preliminary studies have been completed on the adsorption of I 2 onto silver mordenite (AgZ) from prototypical VOG streams. The study reported that AgZ did adsorb I 2 from a prototypical VOG stream, but process upsets resulted in an uneven feed stream concentration. The experiments described in this document both improve the characterization of I 2 adsorption by AgZ from dilute gas streams and further extend it to include characterization of the adsorption of organic iodides (in the form of CH 3 I) onto AgZ under prototypical VOG conditions. The design of this extended duration testing was such that information about the rate of adsorption, the penetration of the iodine species, and the effect of sorbent aging on iodine removal in VOG conditions could be inferred.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Extended Elemental Iodine Adsorption by AgZ under Prototypical Vessel Off-Gas Conditions

U.S. regulations will require the removal of 129 I from the off-gas streams of any used nuclear fuel (UNF) reprocessing plant prior to discharge of the off-gas to the environment. Multiple off-gas streams within a UNF reprocessing plant combine prior to environmental release, and each of these streams contains some amount of iodine. For an aqueous UNF reprocessing plant, these streams include the dissolver off-gas (DOG), the cell off-gas (COG), the vessel off-gas (VOG), the waste off-gas (WOG), and the shear off-gas (SOG). To achieve regulatory compliance, treatment of multiple off-gas streams within the plant must be performed. Of these remaining streams, the VOG is expected to be one of the major contributors to the balance of the residual iodine releases. The VOG will most likely contain iodine at parts-per-billion (ppb*) concentrations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Collocation and integration of reprocessing and repositories: implications for aqueous flowsheets and waste management

It is an accident of history that the current model of the fuel cycle is a separate set of facilities connected by transportation. The question is whether collocation and integration of reprocessing and fuel fabrication with the repository significantly reduce the costs of a closed fuel cycle while improving system performance in terms of safety and long-term repository performance. This paper examines the question in terms of higher-level functional requirements of reprocessing systems and geological repositories.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Improving the Estimates of Waste from the Recycling of Used Nuclear Fuel - 13410

Estimates are presented of wastes arising from the reprocessing of 50 GWD/tonne, 5 year and 50 year cooled used nuclear fuel (UNF) from Light Water Reactors (LWRs), using the 'NUEX' solvent extraction process. NUEX is a fourth generation aqueous based reprocessing system, comprising shearing and dissolution in nitric acid of the UNF, separation of uranium and mixed uranium-plutonium using solvent extraction in a development of the PUREX process using tri-n-butyl phosphate in a kerosene diluent, purification of the plutonium and uranium-plutonium products, and conversion of them to uranium trioxide and mixed uranium-plutonium dioxides respectively. These products are suitable for use as new LWR uranium oxide and mixed oxide fuel, respectively. Each unit process is described and the wastes that it produces are identified and quantified. Quantification of the process wastes was achieved by use of a detailed process model developed using the Aspen Custom Modeler suite of software and based on both first principles equilibrium and rate data, plus practical experience and data from the industrial scale Thermal Oxide Reprocessing Plant (THORP) at the Sellafield nuclear site in the United Kingdom. By feeding this model with the known concentrations of all species in the incoming UNF, the species and their concentrations in all product and waste streams were produced as the output. By using these data, along with a defined set of assumptions, including regulatory requirements, it was possible to calculate the waste forms, their radioactivities, volumes and quantities. Quantification of secondary wastes, such as plant maintenance, housekeeping and clean-up wastes, was achieved by reviewing actual operating experience from THORP during its hot operation from 1994 to the present time. This work was carried out under a contract from the United States Department of Energy (DOE) and, so as to enable DOE to make valid comparisons with other similar work, a number of assumptions were agreed. These include an assumed reprocessing capacity of 800 tonnes per year, the requirement to remove as waste forms the volatile fission products carbon-14, iodine-129, krypton-85, tritium and ruthenium-106, the restriction of discharge of any water from the facility unless it meets US Environmental Protection Agency drinking water standards, no intentional blending of wastes to lower their classification, and the requirement for the recovered uranium to be sufficiently free from fission products and neutron-absorbing species to allow it to be re-enriched and recycled as nuclear fuel. The results from this work showed that over 99.9% of the radioactivity in the UNF can be concentrated via reprocessing into a fission-product-containing vitrified product, bottles of compressed krypton storage and a cement grout containing the tritium, that together have a volume of only about one eighth the volume of the original UNF. The other waste forms have larger volumes than the original UNF but contain only the remaining 0.1% of the radioactivity. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

FUEL CYCLE POTENTIAL WASTE FOR DISPOSITION

The United States (U.S.) currently utilizes a once-through fuel cycle where used nuclear fuel (UNF) is stored on-site in either wet pools or in dry storage systems with ultimate disposal in a deep mined geologic repository envisioned. Within the Department of Energy's (DOE) Office of Nuclear Energy (DOE-NE), the Fuel Cycle Research and Development Program (FCR&D) develops options to the current commercial fuel cycle management strategy to enable the safe, secure, economic, and sustainable expansion of nuclear energy while minimizing proliferation risks by conducting research and development of advanced fuel cycles, including modified open and closed cycles. The safe management and disposition of used nuclear fuel and/or nuclear waste is a fundamental aspect of any nuclear fuel cycle. Yet, the routine disposal of used nuclear fuel and radioactive waste remains problematic. Advanced fuel cycles will generate different quantities and forms of waste than the current LWR fleet. This study analyzes the quantities and characteristics of potential waste forms including differing waste matrices, as a function of a variety of potential fuel cycle alternatives including: (1) Commercial UNF generated by uranium fuel light water reactors (LWR). Four once through fuel cycles analyzed in this study differ by varying the assumed expansion/contraction of nuclear power in the U.S. (2) Four alternative LWR used fuel recycling processes analyzed differ in the reprocessing method (aqueous vs. electro-chemical), complexity (Pu only or full transuranic (TRU) recovery) and waste forms generated. (3) Used Mixed Oxide (MOX) fuel derived from the recovered Pu utilizing a single reactor pass. (4) Potential waste forms generated by the reprocessing of fuels derived from recovered TRU utilizing multiple reactor passes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

FUEL CYCLE POTENTIAL WASTE FOR DISPOSITION

The United States (U.S.) currently utilizes a once-through fuel cycle where used nuclear fuel (UNF) is stored on-site in either wet pools or in dry storage systems with ultimate disposal in a deep mined geologic repository envisioned. Within the Department of Energy's (DOE) Office of Nuclear Energy (DOE-NE), the Fuel Cycle Research and Development Program (FCR&D) develops options to the current commercial fuel cycle management strategy to enable the safe, secure, economic, and sustainable expansion of nuclear energy while minimizing proliferation risks by conducting research and development of advanced fuel cycles, including modified open and closed cycles. The safe management and disposition of used nuclear fuel and/or nuclear waste is a fundamental aspect of any nuclear fuel cycle. Yet, the routine disposal of used nuclear fuel and radioactive waste remains problematic. Advanced fuel cycles will generate different quantities and forms of waste than the current LWR fleet. This study analyzes the quantities and characteristics of potential waste forms including differing waste matrices, as a function of a variety of potential fuel cycle alternatives including: (1) Commercial UNF generated by uranium fuel light water reactors (LWR). Four once through fuel cycles analyzed in this study differ by varying the assumed expansion/contraction of nuclear power in the U.S; (2) Four alternative LWR used fuel recycling processes analyzed differ in the reprocessing method (aqueous vs. electro-chemical), complexity (Pu only or full transuranic (TRU) recovery) and waste forms generated; (3) Used Mixed Oxide (MOX) fuel derived from the recovered Pu utilizing a single reactor pass; and (4) Potential waste forms generated by the reprocessing of fuels derived from recovered TRU utilizing multiple reactor passes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DEVELOPMENT OF GLASS COMPOSITIONS TO IMMOBILIZE ALKALI, ALKALINE EARTH, LANTHANIDE AND TRANSITION METAL FISSION PRODUCTS FROM NUCLEAR FUEL REPROCESSING

The Advanced Fuel Cycle Initiative (AFCI) waste management strategy revolves around specific treatment of individual or groups of separated waste streams. A goal for the separations processes is to efficiently manage the waste to be dispositioned as high level radioactive waste. The Advanced Fuel Cycle Initiative (AFCI) baseline technology for immobilization of the lanthanide (Ln) and transition metal fission product (TM) wastes is vitrification into a borosilicate glass. A current interest is to evaluate the feasibility of vitrifying combined waste streams to most cost effectively immobilize the wastes resulting from aqueous fuel reprocessing. Studies showed that high waste loadings are achievable for the Ln only (Option 1) stream. Waste loadings in excess of 60 wt % (on a calcined oxide basis) were demonstrated via a lanthanide borosilicate (LaBS) glass. The resulting glasses had excellent relative durability as determined by the Product Consistency Test (PCT). For a combined Ln and TM waste stream glass (Option 2), noble metal solubility was found to limit waste loading. However, the measured PCT normalized elemental releases for this glass were at least an order of magnitude below that of Environmental Assessment (EA) glass. Current efforts to evaluate the feasibility of vitrifying combined Ln, TM, alkali (Cs is the primary radionuclide of concern) and alkaline earth (Sr is the primary radionuclide of concern) wastes (Option 3) have shown that these approaches are feasible. However, waste loading limitations with respect to heat load (Cs/Sr loading), molybdenum solubility and/or noble metal solubility will likely be realized and must be considered in determining the cost effectiveness of these approaches.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DEVELOPMENT OF GLASS COMPOSITIONS TO IMMOBILIZE ALKALI, ALKALINE EARTH, LANTHANIDE AND TRANSITION METAL FISSION PRODUCTS FROM NUCLEAR FUEL REPROCESSING

The Advanced Fuel Cycle Initiative (AFCI) waste management strategy revolves around specific treatment of individual or groups of separated waste streams. A goal for the separations processes is to efficiently manage the waste to be dispositioned as high level radioactive waste. The Advanced Fuel Cycle Initiative (AFCI) baseline technology for immobilization of the lanthanide (Ln) and transition metal fission product (TM) wastes is vitrification into a borosilicate glass. A current interest is to evaluate the feasibility of vitrifying combined waste streams to most cost effectively immobilize the wastes resulting from aqueous fuel reprocessing. Studies showed that high waste loadings are achievable for the Ln only (Option 1) stream. Waste loadings in excess of 60 wt % (on a calcined oxide basis) were demonstrated via a lanthanide borosilicate (LaBS) glass. The resulting glasses had excellent relative durability as determined by the Product Consistency Test (PCT). For a combined Ln and TM waste stream glass (Option 2), noble metal solubility was found to limit waste loading. However, the measured PCT normalized elemental releases for this glass were at least an order of magnitude below that of Environmental Assessment (EA) glass. Current efforts to evaluate the feasibility of vitrifying combined Ln, TM, alkali (Cs is the primary radionuclide of concern) and alkaline earth (Sr is the primary radionuclide of concern) wastes (Option 3) have shown that these approaches are feasible. However, waste loading limitations with respect to heat load (Cs/Sr loading), molybdenum solubility and/or noble metal solubility will likely be realized and must be considered in determining the cost effectiveness of these approaches.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Tritium Management Requirements and Approaches for UNF Reprocessing

Four radionuclides have been identified as being sufficiently volatile in reprocessing of nuclear fuel that their release to the environment needs to be controlled to meet U.S. regulatory requirements. These radionuclides are {sup 3}H, {sup 14}C, {sup 85}Kr, and {sup 129}I. While iodine has been the focus of a number of studies due to the high decontamination factor (DF) requirements on multiple escape pathways, it is clear from prior studies that the control of tritium will also be a significant issue for future reprocessing plants, especially if processing relatively short-cooled fuels (<10 yr post-reactor discharge). Tritium contained in a used nuclear fuel (UNF) matrix will be released into the liquid and off-gas streams during fuel reprocessing. The amounts released into the process streams are a function of the type and burnup of the fuel processed and the chemical processes employed within the reprocessing plant. Previous studies have examined the tritium capture requirements for the reprocessing facility assuming that all of the tritium contained in the fuel matrix is volatilized in the head-end operations; i.e., tritium pretreatment is employed and tritium is completely released from the cladding. This scenario tends to limit the release pathway to the headend off-gas stream. Previous studies by Jubin and Spencer examined the accumulation and distribution of tritium in an aqueous-based reprocessing plant.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Radioactive Waste Partitioning and Transmutation within Advanced Fuel Cycles: Achievements and Challenges

If nuclear power should become a sustainable source of energy, a safe, robust and acceptable solution must be pursued for existing and projected inventories of high-activity, long-lived radioactive waste. Remarkable progress in the last two decades has been made in the field of geological disposal. Some countries have reached important milestones and geological disposal (of spent fuel) is expected to start in 2020 in Finland and in 2022 in Sweden and in fact the licensing of the geological repositories in both countries is now entering into their final phases. In France disposal of Intermediate Level Wastes (ILW) and vitrified High Level Wastes (HLW) is expected to start around 2025, according to the roadmap defined by a Parliament Act in 2006. In this context, transmutation of part of the waste through use of advanced fuel cycles, probably feasible in the coming decades, has the potential of reducing the burden on the geological repository. This article presents the physical principle of transmutation and reviews several strategies of P&T (Partitioning and Transmutation). Many recent studies have demonstrated that the impact of P&T on geological disposal concepts is not overwhelmingly high. However, by reducing waste heat production a more efficient utilization of repository space is likely. Moreover, even if radionuclide release from the waste to the environment and related calculated doses to the population are only partially reduced by P&T, it is important to point out that a clear reduction of the actinide inventory in the High Level Waste definitely reduces risks arising from less probable evolutions of a repository, i.e. increase of actinide mobility in certain geochemical situations and radiological impact by human intrusion.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Evaluation of Iron‐Phosphate Glass–Ceramic Waste Form for Electrorefiner Salt Waste Simulant Dechlorinated With Phosphoric Acid

The importance of glass and glass–ceramic nuclear waste forms has been reaffirmed in recent years by the growing interest in nuclear power as a reliable energy source. Determination of processing methods for the disposal of halide-containing wastes will be essential for the advancement of nuclear technologies such as non-aqueous fuel reprocessing. Phosphate-based dechlorination and subsequent vitrification of radioactive salt waste into an iron-phosphate waste form have been identified as a potential processing scheme for electrochemical processing waste. The impact of H 3 PO 4 -based dechlorination of complex salt mixtures on the vitrification process and structure of the final iron-phosphate waste form has not yet been investigated. In this work, iron-phosphate glass–ceramics were made from simulant salt waste (48LiCl–33KCl–19NaCl mol%) dechlorinated with the H3PO4-based method. The glass-forming region was compared to that of traditionally prepared Na 2 O–Fe 2 O 3 –P 2 O 5 systems. For a candidate glass-forming composition, the processing scheme presented here was determined to favor Fe 3+ species. The O/P molar ratio was consistent for the candidate composition when dechlorinated at 400°C and 600°C in air and argon environments, indicating glass network connectivity was maintained despite variations in processing parameters. The results presented here validate processing schemes requiring iron-phosphate waste form synthesis following H 3 PO 4 -based dechlorination.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Active Interrogation Using Electronic Neutron Generators for Nuclear Safeguards Applications

Active interrogation, a measurement technique which uses a radiation source to probe materials and generate unique signatures useful for characterizing those materials, is a powerful tool for assaying special nuclear material. The most commonly used technique for performing active interrogation is to use an electronic neutron generator as the probe radiation source. Exploiting the unique operating characteristics of these devices, including their monoenergetic neutron emissions and their ability to operate in pulsed modes, presents a number of options for performing prompt and delayed signature analyses using both photon and neutron sensors. A review of literature in this area shows multiple applications of the active neutron interrogation technique for performing nuclear nonproliferation measurements. Some examples include measuring the plutonium content of spent fuel, assaying plutonium residue in spent fuel hull claddings, assaying plutonium in aqueous fuel reprocessing process streams, and assaying nuclear fuel reprocessing facility waste streams to detect and quantify fissile material. This paper discusses the historical use of this technique and examines its context within the scope and challenges of next-generation nuclear fuel cycles and advanced concept nuclear fuel cycle facilities.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗