Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomic pair distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Local atomic density of microporous carbons

We investigated the structure of two disordered carbons: activated carbon fibers (ACF) and ultramicroporous carbon (UMC). These carbons have highly porous structure with large surface areas and consequently low macroscopic density that should enhance adsorption of hydrogen. We used the atomic pair distribution function to probe the local atomic arrangements. The results show that the carbons maintain an in-plane local atomic structure similar to regular graphite, but the stacking of graphitic layers is strongly disordered. Although the local atomic density of these carbons is lower than graphite, it is only ~20% lower and is much higher than the macroscopic density due to the porosity of the structure. For this reason, the density of graphene sheets that have optimum separation for hydrogen adsorption is lower than anticipated.

08 HYDROGEN↗

Total-scattering pair-distribution function analysis of zinc from high-energy synchrotron data

The crystal structure of zinc metal deviates from the ideal hexagonal close packing structure by a significantly increased axial ratio (c/a). The local atomic structure of zinc metal is investigated using the total scattering atomic pair distribution function (PDF) analysis based on X-ray powder diffraction data collected at ambient conditions. The X-ray total scattering PDF analysis confirms that the crystal structure of zinc can be described in terms of wurtzite structure, but with an anomalously atomic displacement parameters U 33 , indicating a significant displacement disorder along the c-axis. For the long r-range PDF refinements, the thermal motion of zinc shows a notable anisotropy as expressed by the ratio U 33 /U 11 of 2.5 at ambient conditions. This average distortion level along the c-axis, was not reflected locally for the features below 5.0 Å as it fits the high r region. Based on PDF refinements over different r-ranges, we measure an interesting increase of the U 33 value with decreasing the r-range of the refinement. Finally, this suggests that the local structure features in zinc metal differ from the average structure ones.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atomic Three-Dimensional Investigations of Pd Nanocatalysts for Acetylene Semi-hydrogenation

Deciphering the three-dimensional (3D) insight into nanocatalyst surfaces at the atomic level is crucial to understanding catalytic reaction mechanisms and developing high-performance catalysts. Nevertheless, better understanding the inherent insufficiency of a long-range ordered lattice in nanocatalysts is a big challenge. Here, in this work, we report the local structure of Pd nanocatalysts, which is beneficial for demonstrating the shape-structure-adsorption relationship in acetylene hydrogenation. The 5.27 nm spherical Pd catalyst (Pd sph ) shows an ethylene selectivity of 88% at complete acetylene conversion, which is much higher than those of the Pd octahedron and Pd cube and superior to other reported monometallic Pd nanocatalysts so far. By virtue of the local structure revelation combined with the atomic pair distribution function (PDF) and reverse Monte Carlo (RMC) simulation, the atomic surface distribution of the unique compressed strain of Pd-Pd pairs in Pd sph was revealed. Density functional theory calculations verified the obvious weakening of the ethylene adsorption energy on account of the surface strain of Pd sph . It is the main factor to avoid the over-hydrogenation of acetylene. The present work, entailing shape-induced surface strain manipulation and atomic 3D insight, opens a new path to understand and optimize chemical activity and selectivity in the heterogeneous catalysis process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the Nanoscale Structure of K x Fe 2-y Ch 2 (Ch = S, Se): A Neutron Pair Distribution Function View

Comparative exploration of the nanometer-scale atomic structure of K x Fe 2-y Ch 2 (Ch = S, Se) was performed using neutron total scattering-based atomic pair distribution function (PDF) analysis of 5 K powder diffraction data in relation to physical properties. Whereas K x Fe 2-y Se 2 is a superconductor with a transition temperature of about 32 K, the isostructural sulphide analogue is not, which instead displays a spin glass semiconducting behavior at low temperatures. The PDF analysis explores phase separated and disordered structural models as candidate descriptors of the low temperature data. For both materials, the nanoscale structure is well described by the iron (Fe)-vacancy-disordered K 2 Fe 5-y Ch 5 (I4/m) model containing excess Fe. An equally good description of the data is achieved by using a phase separated model comprised of I4/m vacancy-ordered and I4/mmm components. The I4/mmm component appears as a minority phase in the structure of both K x Fe 2-y Se 2 and K x Fe 2-y S 2 , and with similar contribution, implying that the phase ratio is not a decisive factor influencing the lack of superconductivity in the latter. Comparison of structural parameters of the Fe-vacancy-disordered model indicates that the replacement of selenium (Se) by sulphur (S) results in an appreciable reduction in the Fe-Ch interatomic distances and anion heights, while simultaneously increasing the irregularity of FeCh 4 tetrahedra, suggesting the more significant influence of these factors. Finally, structural features are also compared to the non-intercalated FeSe and FeS parent phases, providing further information for the discussion about the influence of the lattice degrees of freedom on the observed properties in layered iron chalcogenides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Local Chemical Ordering and Negative Thermal Expansion in PtNi Alloy Nanoparticles

An atomic insight into the local chemical ordering and lattice strain is particular interesting to recent emerging bimetallic nanocatalysts such as PtNi alloys. Here in this paper, we reported the atomic distribution, chemical environment and lattice thermal evolution in full-scale structural description of PtNi alloy nanoparticles (NPs). The different segregation of elements in the well-faceted PtNi nanoparticles is convinced by extended X-ray absorption fine structure (EXAFS). Atomic pair distribution function (PDF) study evidences the co-existence of the face-centered cubic and tetragonal ordering parts in the local environment of PtNi nanoparticles. Further reverse monte carlo (RMC) simulation with PDF data obviously exposed the segregation as Ni and Pt in the centers of {111} and {001} facets respectively. Layer-by-layer statistical analysis up to 6 nm for the local atomic pairs revealed the distribution of local tetragonal ordering on the surface. This local coordination environment facilitates the distribution of heteroatomic Pt-Ni pairs, which plays an important role in the negative thermal expansion of Pt 41 Ni 59 NPs. The present study on PtNi alloy NPs from local short-range coordination to long-range average lattice provides a new perspective on tailoring physical properties in nanomaterials.

36 MATERIALS SCIENCE↗

Understanding electronic peculiarities in tetragonal FeSe as local structural symmetry breaking

Traditional band theory of perfect crystalline solids often uses as input the structure deduced from diffraction experiments; when modeled by the minimal unit cell this often produces a spatially averaged model. The present study illustrates that this is not always a safe practice unless one examines if the intrinsic bonding mechanism is capable of benefiting from the formation of a distribution of lower symmetry local environments that differ from the macroscopically averaged structure. This can happen either due to positional or to magnetic symmetry breaking. By removing the constraint of a small crystallographic cell, the energy minimization in the density functional theory finds atomic and spin symmetry breaking, not evident in conventional diffraction experiments but being found by local probes such as atomic pair distribution function analysis. Here in this paper we report that large atomic and electronic anomalies in bulk tetragonal FeSe emerge from the existence of distributions of local positional and magnetic moment motifs. The found symmetry-broken motifs obtained by minimization of the internal energy represent what chemical bonding in the tetragonal phase prefers as intrinsic energy lowering (stabilizing) static distortions. This explains observations of band renormalization, predicts orbital order and enhanced nematicity, and provides unprecedented close agreement with spectral function measured by photoemission and local atomic environment revealed by the pair distribution function. While the symmetry-restricted strong correlation approach has been argued previously to be the exclusive theory needed for describing the main peculiarities of FeSe, we show here that the symmetry-broken mean-field approach addresses numerous aspects of the problem, provides intuitive insight into the electronic structure, and opens the door for large-scale mean-field calculations for similar d -electron quantum materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Local Atomic Density of Microporous Carbons

We investigated the structure of two disordered carbons: activated carbon fibers (ACF) and ultramicroporous carbon (UMC). These carbons have highly porous structure with large surface areas and consequently low macroscopic density that should enhance adsorption of hydrogen. We used the atomic pair distribution function to probe the local atomic arrangements. The results show that the carbons maintain an in-plane local atomic structure similar to regular graphite, but the stacking of graphitic layers is strongly disordered. Although the local atomic density of these carbons is lower than graphite, it is only {approx}20% lower and is much higher than the macroscopic density due to the porosity of the structure. For this reason, the density of graphene sheets that have optimum separation for hydrogen adsorption is lower than anticipated.

08 HYDROGEN↗

Three-dimensional charge density wave in the dual heavy fermion system UPt 2 Si 2

Heavy fermion liquids offer via their Kondo lattice diverse possibilities for exotic ground states. Using variable-temperature atomic pair distribution function analysis, we study the local atomic structure of the "dual" heavy fermion liquid UPt 2 Si 2 , which exhibits antiferromagnetism consistent with localized 5f-electron states and transport properties characteristic to itinerant 5f-"spd" hybridized electron systems. We show that UPt 2 Si 2 exhibits periodic lattice distortions (PLDs) involving both uranium and platinum atoms that are characteristic to three-dimensional charge density waves. Here, the temperature evolution of the PLDs tracks that of the transport and magnetic properties, suggesting the presence of little-known 5f-electron-lattice interactions. We argue that PLDs in heavy fermion liquids in general, and in particular in UPt 2 Si 2 , appear as new degrees of freedom that entangle competing electronic states and, as such, must be accounted for when their rich physics is considered.

36 MATERIALS SCIENCE↗

Structural Characterization of the Platinum Nanoparticle Hydrogen-Evolving Catalyst Assembled on Photosystem I by Light-Driven Chemistry

Directed assembly of abiotic catalysts onto biological redox protein frameworks is of interest as an approach for the synthesis of biohybrid catalysts that combine features of both synthetic and biological materials. In this report, we provide a multiscale characterization of the platinum nanoparticle (NP) hydrogen-evolving catalysts that are assembled by light-driven reductive precipitation of platinum from an aqueous salt solution onto the photosystem I protein (PSI), isolated from cyanobacteria as trimeric PSI. The resulting PSI-NP assemblies were analyzed using a combination of X-ray energy-dispersive spectroscopy (XEDS), high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), small-angle X-ray scattering (SAXS), and high-energy X-ray scattering with atomic pair distribution function (PDF) analyses. The results show that the PSI-supported NPs are approximately 1.8 nm diameter disk-shaped particles that assemble at discrete sites with 145 Å separation. This separation is too large to be consistent with NP nucleation and growth at a site adjacent to the F B cofactor site. Instead, we suggest a mechanism for NP growth at hydrophobic sites on the PSI stromal surface. The NPs photoreductively assembled on the PSI stromal surface are found to be analogous to the nanostructures produced by successive cycles of atomic layer deposition (ALD) of platinum onto 40 nm porous anodic alumina oxide supports, although the mechanisms for nucleation appear to differ. In conclusion, this work establishes a foundation for the investigation of the reductive assembly of abiotic metal catalysts at sites connected to photochemically reducing equivalent production in PSI.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Peptide-Directed PdAu Nanoscale Surface Segregation: Toward Controlled Bimetallic Architecture for Catalytic Materials

Bimetallic nanoparticles are of immense scientific and technological interest given the synergistic properties observed when mixing two different metallic species at the nanoscale. This is particularly prevalent in catalysis, where bimetallic nanoparticles often exhibit improved catalytic activity and durability over their monometallic counterparts. Yet despite intense research efforts, little is understood regarding how to optimize bimetallic surface composition and structure synthetically using rational design principles. Recently, it has been demonstrated that peptide-enabled routes for nanoparticle synthesis result in materials with sequence-dependent catalytic properties, providing an opportunity for rational design through sequence manipulation. In this study, bimetallic PdAu nanoparticles are synthesized with a small set of peptides containing known Pd and Au binding motifs. The resulting nanoparticles were extensively characterized using high-resolution scanning transmission electron microscopy, X-ray absorption spectroscopy and high-energy X-ray diffraction coupled to atomic pair distribution function analysis. Structural information obtained from synchrotron radiation methods were then used to generate model nanoparticle configurations using reverse Monte Carlo simulations, which illustrate sequence-dependence in both surface structure and surface composition. Replica exchange solute tempering molecular dynamic simulations were also used to predict the modes of peptide binding on monometallic surfaces, indicating that different sequences bind to the metal interfaces via different mechanisms. As a testbed reaction, electrocatalytic methanol oxidation experiments were performed, wherein differences in catalytic activity are clearly observed in materials with identical bimetallic composition. Finally, taken together, this study indicates that peptides could be used to arrive at bimetallic surfaces with enhanced catalytic properties, which could be leveraged for rational bimetallic nanoparticle design using peptide-enabled approaches.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Super-Stable, Highly Monodisperse Plasmonic Nanocrystals with 500 Gold Atoms: Au~500(SR)~120

Determining the composition of plasmonic nanoparticles is challenging due to a deficiency in tools capable of accurately evaluating the number of atoms. Mass spectrometry plays a significant role in determining nanoparticle composition at the atomic level. Significant progress has been made in understanding ultra-small gold nanoparticles, like Au25(SR)18 and Au38(SR)24, with a Au core diameter of 0.97 and 1.3 nm, respectively. However, progress in small plasmonic nanoparticles (2 - 5 nm) is currently challenging, due in part to limitations in synthesizing monodisperse nanoparticles. Here, we report a plasmonic nanocrystal that is highly monodisperse, with an unprecedented variation of less than 20 gold atoms. The composition of the super-stable plasmonic nanocrystals at 115 kDa was determined to contain Au500 10SR120 3. The Au~500 system, named Faraduarate-500, is the largest size to be characterized using high resolution ESI mass spectrometry. Atomic pair distribution function (PDF) data shows that the local atomic structure is consistent with a face-centered cubic (fcc) or Marks decahedral arrangement. High resolution scanning transmission electron microscopy images show that the diameter is 2.4 0.1 nm. The radius of gyration measured by small angle X-ray scattering (SAXS), is 1.05 0.05 nm, and the size and the shape of SAXS molecular envelope are in agreement with TEM and PDF measurements.

Kumara, Chanaka↗

Three-energy focusing Laue monochromator for the diamond light source x-ray pair distribution function beamline I15-1

The I15-1 beamline, the new side station to I15 at the Diamond Light Source, will be dedicated to the collection of atomic pair distribution function data. A Laue monochromator will be used consisting of three silicon crystals diffracting X-rays at a common Bragg angle of 2.83°. The crystals use the (1 1 1), (2 2 0), and (3 1 1) planes to select 40, 65, and 76 keV X-rays, respectively, and will be bent meridionally to horizontally focus the selected X-rays onto the sample. All crystals will be cut to the same optimized asymmetry angle in order to eliminate image broadening from the crystal thickness. Finite element calculations show that the thermal distortion of the crystals will affect the image size and bandpass.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Understanding Composition-Dependent Synergy of PtPd Alloy Nanoparticles in Electrocatalytic Oxygen Reduction Reaction

Gaining an insight into the relationship between the bimetallic composition and catalytic activity is essential for the design of nanoalloy catalysts for oxygen reduction reaction. This report describes findings of a study of the composition–activity relationship for PtPd nanoalloy catalysts in oxygen reduction reaction (ORR). Pt n Pd 100-n nanoalloys with different bimetallic compositions are synthesized by wet chemical method. While the size of the Pt 50 Pd 50 nanoparticles is the largest among the nanoparticles with different compositions, the characterization of the nanoalloys using synchrotron high-energy X-ray diffraction (HE-XRD) coupled to atomic pair distribution function (PDF) analysis reveals that the nanoalloy with an atomic Pt:Pd ratio of 50:50 exhibits an intermediate lattice parameter. Electrochemical characterization of the nanoalloys shows a minimum ORR activity at Pt:Pd ratio close to 50:50, whereas a maximum activity is achieved at Pt:Pd ratio close to 10:90. The composition–activity correlation is assessed by theoretical modeling based on DFT calculation of nanoalloy clusters. In addition to showing an electron transfer from PtPd alloy to oxygen upon its adsorption on the nanoalloy, a relatively large energy difference between HOMO for nanoalloy and LUMO for oxygen is revealed for the nanoalloy with an atomic Pt:Pd ratio of 50:50. By analysis of the adsorption of OH species on PtPd (111) surfaces of different compositions, the strongest adsorption energy is observed for Pt 96 Pd 105 (Pt:Pd ≈ 50:50) cluster, which is believed to be likely responsible for the reduced activity. Interestingly, the adsorption energy on Pt24Pd177 (Pt:Pd ≈ 10:90) cluster falls in between Pt 96 Pd 105 and Pd 201 clusters, which is believed to be linked to the observation of the highest catalytic activity for the nanoalloy with an atomic Pt:Pd ratio of 10:90. Furthermore, these findings have implications for the design of composition-tunable nanoalloy catalysts for ORR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic-scale structure of biogenic materials by total X-ray diffraction : A study of bacterial and fungal MnOx.

Biogenic materials are produced by microorganisms and are typically found in a nanophase state. As such, they are difficult to characterize structurally. In this report, we demonstrate how high-energy X-ray diffraction and atomic pair distribution function analysis can be used to determine the atomic-scale structures of MnO{sub x} produced by bacteria and fungi. These structures are well-defined, periodic, and species-specific, built of Mn-O{sub 6} octahedra forming birnessite-type layers and todorokite-type tunnels, respectively. The inherent structural diversity of biogenic material may offer opportunities for practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SAS PDF: pair distribution function analysis of nanoparticle assemblies from small-angle scattering data

SASPDF, a method for characterizing the structure of nanoparticle assemblies (NPAs), is presented. The method is an extension of the atomic pair distribution function (PDF) analysis to the small-angle scattering (SAS) regime. The PDFgetS3 software package for computing the PDF from SAS data is also presented. An application of the SASPDF method to characterize structures of representative NPA samples with different levels of structural order is then demonstrated. The SASPDF method quantitatively yields information such as structure, disorder and crystallite sizes of ordered NPA samples. The method was also used to successfully model the data from a disordered NPA sample. The SASPDF method offers the possibility of more quantitative characterizations of NPA structures for a wide class of samples.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Local structure of Ni 80 X 20 (X: Cr, Mn, Pd) solid-solution alloys and its response to ion irradiation

In this work, the local structure of Ni 80 X 20 (X: Cr, Mn, Pd) solid-solution alloys was investigated with x-ray absorption and total scattering x-ray diffraction methods. Atomic pair distribution function (PDF) analysis indicated that the local lattice distortion is strongly relevant to the atomic size mismatch, and the local lattice distortion in Ni80Pd20 alloy is obviously larger than that in other solid-solution alloys. The bond length of different atomic pairs was derived from the fitting of extended x-ray absorption fine structure spectra. Quantitative analysis of the local bonding environment in Ni 80 Cr 20 during Ni ion irradiation suggested that Cr atoms tend to form clusters in Ni 80 Cr 20 with the increase of ion dose.

36 MATERIALS SCIENCE↗

Experimental Verification of Ir 5d Orbital States and Atomic Structures in Highly Active Amorphous Iridium Oxide Catalysts

In iridium oxide catalysts, the electronic states whose energies are in the range of energetics and charge transfer kinetics of the oxygen evolution reaction (OER) originate from the Ir 5d orbital states. However, the understanding of the atomic structures and orbital states underlying catalytic reactivity in amorphous iridium oxide oxygen evolving catalysts (Ir-OECs) is incomplete compared to that of crystalline oxides, owing to a lack of direct experimental verification. Here, we present experimental approaches using resonant inelastic X-ray scattering (RIXS) to directly access Ir 5d orbital excitations at the Ir L 3 edge and atomic pair distribution function (PDF) measurements to characterize electronic and coordination structures at the atomic scale. The so-called iridium blue layer (IrBL) and IrO x were formed from the organometallic precursor complex [Cp*Ir(H 2 O) 3 ]SO 4 and the inorganic precursor IrCl 3 , respectively. Ex situ IrBL and IrO x films for RIXS and PDF measurements were prepared by conditioning electrodeposited films at a low voltage. The incident energy RIXS profile of IrO x exhibited extra weak resonantly enhanced excitation below 2 eV energy loss. The feature was clearly different from a single high-energy excitation above 3 eV of IrBL related to the interband transition between π- and σ-antibonding states. The atomic structure refinement based on PDF measurements revealed the atomic structure domains to have edge- and corner-shared IrO 6 octahedra with trigonal-type distortion. Furthermore, density functional theory calculations guided by the refined atomic structures shed light on the electronic structure corresponding to experimental results, including insulating and metallic phases in ex situ IrBL and IrO x films, respectively. Our study establishes different Ir 5d orbital states and atomic structures in two amorphous Ir oxide OER catalysts in their reduction states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗