Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomically thin optical element”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

A soft X-ray beam-splitting multilayer optic for the NASA GEMS Bragg Reflection Polarimeter

A soft X-ray, beam-splitting, multilayer optic has been developed for the Bragg Reflection Polarimeter (BRP) on the NASA Gravity and Extreme Magnetism Small Explorer Mission (GEMS). The optic is designed to reflect 0.5 keV X-rays through a 90° angle to the BRP detector, and transmit 2–10 keV X-rays to the primary polarimeter. The transmission requirement prevents the use of a thick substrate, so a 2 μm thick polyimide membrane was used. Atomic force microscopy has shown the membrane to possess high spatial frequency roughness less than 0.2 nm rms, permitting adequate X-ray reflectance. A multilayer thin film was especially developed and deposited via magnetron sputtering with reflectance and transmission properties that satisfy the BRP requirements and with near-zero stress. Furthermore, reflectance and transmission measurements of BRP prototype elements closely match theoretical predictions, both before and after rigorous environmental testing.

36 MATERIALS SCIENCE↗

Influence of disorder on localization and density of states in amorphous carbon nitride thin films systems rich in {pi}-bonded carbon atoms

We discuss in this paper the evolution of both the density of states (DOS) located between the band-tail states and the DOS around the Fermi level N(E{sub F}) in amorphous carbon nitride films (a-CN{sub x}) as a function of the total nitrogen partial pressure ratio in the Ar/N{sub 2} plasma mixture. The films were deposited by three different deposition techniques and their microstructure was characterized using a combination of infrared and Raman spectroscopy and optical transmission experiments, completed with electrical conductivity measurements, as a function of temperature. The observed changes in the optoelectronic properties are attributed to the modification in the atomic bonding structures, which were induced by N incorporation, accompanied by an increase in the sp{sup 2} carbon bonding configurations and their relative disorder. The electrical conductivity variation was interpreted in terms of local effects on the nature and energy distribution of {pi} and {pi}* states.

36 MATERIALS SCIENCE↗

Fabrication of two-dimensional Au at FePt core-shell nanoparticle arrays by photochemical metal deposition

In this report, we experimentally demonstrate that single platinum nanoparticles exhibit the necessary catalytic activity for the optically induced reduction of H[AuCl{sub 4}] complexes to elemental gold. This finding is exploited for the parallel Au encapsulation of FePt nanoparticles arranged in a self-assembled two-dimensional array. Magnetic force microscopy reveals that the thin gold layer formed on the FePt particles leads to a strongly increased long-term stability of their magnetization under ambient conditions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Final Technical Report - Rapid Surface Microanalysis using a Low Temperature Plasma

This project focused on improving our current understanding and scientific knowledge in the area of plasma-surface interactions and plasma assisted material synthesis related to advanced microelectronics and nanotechnology. Current challenges include: controlling the interaction of Low Temperature Plasma (LTP) with a single layer of atoms to manufacture integrated circuits, continued miniaturization of integrated circuits, LTP processing of material surfaces and thin films to enable industrial scale fabrication of advanced microelectronics, synthesis of new materials, nanomaterials, nanotubes, and complex materials, Technology developed in this subtopic is of value to either (i) enable scans of surfaces (~1 sq. cm area) using various microscopies (electron, optical, other) at high resolution (micron or sub-micron resolution) rapidly (hours or days rather than years to complete a high-resolution scan of such a large surface area), or (ii) enable scans of surfaces (~1 sq. cm area) using various microscopies (electron, optical, other) at relatively low resolution rapidly, then apply algorithms to select spots for micron-scale imaging. Sputtering occurs when particles of a solid material are ejected from its surface by energetic particles from a plasma. While the degradation of the solid material and the subsequent deposition of the ejected material onto vulnerable surfaces are the usual subjects of sputtering studies, plasma science has yet to be combined with sputtering to create new diagnostics devices and systems. Small changes in the design of the plasma discharge device make it possible to create broad plasma beams for rapid scanning or small plasma beams to obtain the distribution of ejected elements with micron resolution. In the high-resolution use, the ion flux is extracted from the gas-discharge plasma and focused by a spherical emission surface to micron sizes onto the target specimen, providing very local sputtering and local elemental analysis. We call this “self-focusing”. The radiation from the excited and ionized sputtered atoms is recorded by a spectrometer through a window and fiberglass cable and analyzed with standard software packages used for optical glow discharge spectroscopy. Computer simulations of beam formation were used to verify and optimize the designs to be tested. A prototype was designed, constructed, and used to start experiments of beam formation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A noticeable effect of novel Nd{sup 3+} doping on physical properties of nebulizer spray deposited AZO thin films for optoelectronic technology

In this work, neodymium (Nd) doped aluminum zinc oxide (Nd:AZO) films are prepared on glass substrates via simple spray nebulizer method for the first time. The different Nd doping concentrations were taken as 0%, 0.5%, 1% and 1.5 wt%, however, Al concentration was kept constant as 3 wt%. From X-ray diffraction (XRD) data, various structural properties like: crystallite size, microstrain, dislocation density, lattice constants and texture coefficient were investigated. XRD study confirmed that the Al and Nd were incorporated into ZnO. All the deposited films are of polycrystalline nature and hexagonal structure with (002) orientation. The topology studied by AFM showed that the film had low surface roughness and its values were slightly increased from 21 to 37 nm. Elemental mapping and EDAX studies confirmed the occurrence of Zn, O, Al and Nd in prepared Nd:AZO film. Transmission of deposited Nd:AZO film is around 92% in visible spectrum and estimated energy gap is ~ 3.31 eV. PL spectrum emitted one strong NBE emission at ~ 386 nm for all films, signify their better optical quality. Electrical parameters were studied by four probe measurement and low resistivity (ρ) i.e. ~ 4.12 × 10{sup −4} Ω cm and high carrier concentrations (n) i.e. ~ 3.96 × 10{sup 21} cm{sup −3} were observed for 1.5 wt% Nd:AZO films. The calculated value of ϕ is large as 14.33 × 10{sup −3} (Ω/sq){sup −1}, which are enough for an opto-electronic application.

36 MATERIALS SCIENCE↗

Influence of Hydrogen Plasma Treatment Time to Si:H Layer Deposition Time Ratio on the Properties of Layer-by-Layer Deposited Hydrogenated Silicon (Si:H) Thin Films

Hydrogenated silicon (Si-H) thin films were deposited from a mixture of pure silane (SiH{sub 4}) and hydrogen (H{sub 2}) gases in a home-built plasma enhanced chemical vapour deposition (PECVD) system using the layer-by-layer (LBL) deposition technique. In the LBL process, the deposition was performed by periodically alternating the deposition of Si:H layer with the hydrogen treatment process of the growth surface. In this work, the effects of the H plasma treatment time to Si-H layer growth time ratio on the film properties were studied. The LBL deposited Si-H films studied in this work were deposited using different Si-H layer growth times ranging from 2 minutes to 7 minutes with the hydrogen plasma treatment time on the growth surface fixed at 3 minutes. Optical transmission spectroscopy, X-ray diffraction (XRD), micro-Raman scattering spectroscopy, Fourier transform infrared (FTIR) spectroscopy and atomic force microscopy (AFM) measurements were done on these films to investigate the optical, structural and morphological properties of the films. The films deposited by this technique produced the highest deposition rate of 6.3 A ring /s when the growth time of the Si-H layer was fixed at 5 minutes. These films were amorphous in structure and had large optical energy gaps irrespective of the Si-H layer deposition time. High concentration of cone-like structures was observed in the AFM images for the films deposited using the higher Si-H layer deposition times.

36 MATERIALS SCIENCE↗

Inkjet-printed vertically emitting solid-state organic lasers

In this paper, we show that Inkjet Printing can be successfully applied to external-cavity vertically emitting thin-film organic lasers and can be used to generate a diffraction-limited output beam with an output energy as high as 33.6 μJ with a slope efficiency S of 34%. Laser emission shows to be continuously tunable from 570 to 670 nm using an intracavity polymer-based Fabry-Perot etalon. High-optical quality films with several μm thicknesses are realized, thanks to ink-jet printing. We introduce a new optical material where EMD6415 commercial ink constitutes the optical host matrix and exhibits a refractive index of 1.5 and an absorption coefficient of 0.66 cm{sup −1} at 550–680 nm. Standard laser dyes like Pyrromethene 597 and Rhodamine 640 are incorporated in solution to the EMD6415 ink. Such large size “printed pixels” of 50 mm{sup 2} present uniform and flat surfaces, with roughness measured as low as 1.5 nm in different locations of a 50 μm × 50 μm AFM scan. Finally, as the gain capsules fabricated by Inkjet printing are simple and do not incorporate any tuning or cavity element, they are simple to make, have a negligible fabrication cost, and can be used as fully disposable items. This work opens the way towards the fabrication of really low-cost tunable visible lasers with an affordable technology that has the potential to be widely disseminated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Environmental stability of candidate dielectrics for GaN-based device applications

The thermal and chemical stability of potential dielectrics for GaN-based devices in a GaN metal organic chemical vapor deposition (MOCVD) environment is investigated, and their suitability for use as a gate dielectric and as a regrowth mask for the selective area growth of GaN is discussed. Thin films of MgO, Sc{sub 2}O{sub 3}, and Sc{sub 2}O{sub 3}/MgO were grown by molecular beam epitaxy on GaN/sapphire substrates and then annealed in a MOCVD reactor under GaN growth conditions except for the lack of trimethylgallium. All films were processed into metal-oxide-semiconductor diodes and were characterized before and after being annealed using atomic force microscopy, x-ray reflectivity, x-ray photoelectron spectroscopy, current-voltage (I-V), and capacitance-voltage (C-V) measurements. The Gibbs free energy of all possible reactions was calculated, and their probability and possible influence on the characterization results is examined. After being annealed, the atomic force microscopy of the oxide films showed some degree of roughening for all of them. Despite the surface roughening, all the oxide films examined showed potential for use as a regrowth mask. The MOCVD anneal caused the electrical properties of the MgO film to degrade considerably, and the Sc{sub 2}O{sub 3} films were unable to be electrically characterized after annealing due to shorting, which is believed to be caused by the formation of a ScN layer on the surface. The effect of the thickness of the Sc{sub 2}O{sub 3} cap for MgO films was investigated. The characterization results indicate that the Sc{sub 2}O{sub 3} film dissolved into MgO during annealing and that a ScN film did not form on the surface. Of all the oxide films examined in this study, the Sc{sub 2}O{sub 3}/MgO stack with the thinner Sc{sub 2}O{sub 3} cap exhibited the greatest stability with respect to its electrical properties.

36 MATERIALS SCIENCE↗

Simulation of the Optical Parameters and Study of the Physical Properties of the ITO Films Prepared by the IBAD

Indium tin oxide (ITO) thin films have been deposited onto glass substrates at room temperature by ion beam assisted deposition technique at different deposition rates. During all the deposition processes, the parameters of the Kaufman ion source and the oxygen gas flow are maintained constants. And only the deposition rate is varied from 0,1 nm/s to 0,3 nm/s by adjusting the e-beam power supply. The effects of the deposition rate on the properties of the deposited films have been studied. The structural, optical and electrical properties of the deposited films have been characterized by X-ray diffraction, AFM, transmittance, FTIR, and Hall effect measurements. The optical constants of the deposited films have been calculated by fitting the transmittance spectra. It has been found that although the film prepared at low deposition rate (0,1 nm/s) shows a high transmittance in the visible region, it has a poor electrical conductivity. The films prepared at 0,2 nm/s deposition rate shows a good electrical conductivity, high IR reflectance which is useable for some electromagnetic wave shielding applications and a reasonable transmittance in the visible region.

36 MATERIALS SCIENCE↗

Two-dimensional Fourier-transform spectroscopy of potassium vapor

Optical two-dimensional Fourier-transform (2DFT) spectroscopy is used to study the coherent optical response of potassium vapor in a thin transmission cell. Rephasing and nonrephasing spectra of the D{sub 1} and D{sub 2} transitions are obtained and compared to numerical simulations. Non-perturbative calculations using the optical Bloch equations give very good agreement with the experimental peak strengths and line shapes. Nonradiative Raman-like coherences are isolated using a different 2DFT projection. Comparison between the optical and Raman linewidths shows that dephasing is due to partially correlated energy fluctuations. Density-dependent measurements show distortion of 2DFT spectra due to pulse propagation effects.

74 ATOMIC AND MOLECULAR PHYSICS↗

Effect of Mn concentration and atomic structure on the magnetic properties of Ge thin films

This work reports on the magnetic properties of Ge{sub 100-x}Mn{sub x} (x=0-24 at. %) films prepared by cosputtering a Ge+Mn target and submitted to cumulative thermal annealing treatments up to 500 deg. C. Both as-deposited and annealed films were investigated by means of compositional analysis, Raman scattering spectroscopy, magnetic force microscopy, superconducting quantum interference device magnetometry, and electrical resistivity measurements. All as-deposited films (either pure or containing Mn) exhibit an amorphous structure, which changes to crystalline as the annealing treatments are performed at increasing temperatures. In fact, the magnetic properties of the present Ge{sub 100-x}Mn{sub x} films are very sensitive to the Mn content and whether their atomic structure is amorphous or crystalline. More specifically: whereas the amorphous Ge{sub 100-x}Mn{sub x} films (with high x) present a characteristic spin glass behavior at low temperature; after crystallization, the films (with moderate Mn contents) are ferromagnetic at room temperature. Moreover, the magnetic behavior of the films scales with their Mn concentration and tends to be more pronounced after crystallization. Finally, the semiconducting behavior of the films, experienced by previous optical studies, was confirmed through electrical measurements, which also indicate the dependence of the resistivity with the atomic composition of the films.

36 MATERIALS SCIENCE↗

Growth of strontium ruthenate films by hybrid molecular beam epitaxy

We report on the growth of epitaxial Sr 2 RuO 4 films using a hybrid molecular beam epitaxy approach in which a volatile precursor containing RuO 4 is used to supply ruthenium and oxygen. The use of the precursor overcomes a number of issues encountered in traditional molecular beam epitaxy that uses elemental metal sources. Phase-pure, epitaxial thin films of Sr 2 RuO 4 are obtained. At high substrate temperatures, growth proceeds in a layer-by-layer mode with intensity oscillations observed in reflection high-energy electron diffraction. Films are of high structural quality, as documented by x-ray diffraction, atomic force microscopy, and transmission electron microscopy. In conclusion, the method should be suitable for the growth of other complex oxides containing ruthenium, opening up opportunities to investigate thin films that host rich exotic ground states.

36 MATERIALS SCIENCE↗

A Review of Scalable Hexagonal Boron Nitride ( h -BN) Synthesis for Present and Future Applications

Hexagonal boron nitride (h-BN) is a layered inorganic synthetic crystal exhibiting high temperature stability and high thermal conductivity. As a ceramic material it has been widely used for thermal management, heat shielding, lubrication, and as a filler material for structural composites. Recent scientific advances in isolating atomically thin monolayers from layered van der Waals crystals to study their unique properties has propelled research interest in mono/few layered h-BN as a wide bandgap insulating support for nanoscale electronics, tunnel barriers, communications, neutron detectors, optics, sensing, novel separations, quantum emission from defects, among others. Realizing these futuristic applications hinges on scalable cost-effective high-quality h-BN synthesis. Here, in this work, the authors review scalable approaches of high-quality mono/multilayer h-BN synthesis, discuss the challenges and opportunities for each method, and contextualize their relevance to emerging applications. Maintaining a stoichiometric balance B:N = 1 as the atoms incorporate into the growing layered crystal and maintaining stacking order between layers during multi-layer synthesis emerge as some of the main challenges for h-BN synthesis and the development of processes to address these aspects can inform and guide the synthesis of other layered materials with more than one constituent element. Finally, the authors contextualize h-BN synthesis efforts along with quality requirements for emerging applications via a technological roadmap.

2D materials↗

Persistent photoconductivity in two-dimensional Mo 1-x W x Se 2 –MoSe 2 van der Waals heterojunctions

Van der Waals (vdW) heterojunctions consisting of vertically-stacked individual or multiple layers of two-dimensional (2D) layered semiconductors, especially the transition metal dichalcogenides (TMDs), are fascinating new artificial solids just nanometers-thin that promise novel optoelectronic functionalities due to the sensitivity of their electronic and optical properties to strong quantum confinement and interfacial interactions. Here, monolayers of n-type MoSe 2 and p-type Mo 1-x W x Se 2 –MoSe 2 are grown by vapor transport methods, then transferred and stamped to form artificial vdW heterostructures with different interlayer orientations. Atomic-resolution Z-contrast electron microscopy and electron diffraction are used to characterize both the individual monolayers and the atomic registry between layers in the bilayer vdW heterostructures. These measurements are compared with photoluminescence and low-frequency Raman spectroscopy, which indicates strong interlayer coupling in heterostructures. Remarkably, the heterojunctions exhibit an unprecedented photoconductivity effect that persists at room temperature for several days. This persistent photoconductivity is shown to be tunable by applying a gate bias that equilibrates the charge distribution. Furthermore, these measurements indicate that such ultrathin vdW heterojunctions can function as rewritable optoelectronic switches or memory elements under time-dependent photo-illumination, an effect which appears promising for new monolayer TMDs-based optoelectronic devices applications.

36 MATERIALS SCIENCE↗

MEASUREMENTS OF ISOTOPE EFFECTS IN THE PHOTOIONIZATION OF N{sub 2} AND IMPLICATIONS FOR TITAN'S ATMOSPHERE

Isotope effects in the non-dissociative photoionization of molecular nitrogen (N{sub 2} + h{nu} {yields} N{sub 2} {sup +} + e {sup -}) may play a role in determining the relative abundances of isotopic species containing nitrogen in interstellar clouds and planetary atmospheres but have not been previously measured. Measurements of the photoionization efficiency spectra of {sup 14}N{sub 2}, {sup 15}N{sup 14}N, and {sup 15}N{sub 2} from 15.5 to 18.9 eV (65.6-80.0 nm) using the Advanced Light Source at Lawrence Berkeley National Laboratory show large differences in peak energies and intensities, with the ratio of the energy-dependent photoionization cross sections, {sigma}({sup 14}N{sub 2})/{sigma}({sup 15}N{sup 14}N), ranging from 0.4 to 3.5. Convolving the cross sections with the solar flux and integrating over the energies measured, the ratios of photoionization rate coefficients are J({sup 15}N{sup 14}N)/J({sup 14}N{sub 2}) = 1.00 {+-} 0.02 and J({sup 15}N{sub 2})/J({sup 14}N{sub 2}) = 1.00 {+-} 0.02, suggesting that isotopic fractionation between N{sub 2} and N{sub 2} {sup +} should be small under such conditions. In contrast, in a one-dimensional model of Titan's atmosphere, isotopic self-shielding of {sup 14}N{sub 2} leads to values of J({sup 15}N{sup 14}N)/J({sup 14}N{sub 2}) as large as {approx}1.17, larger than under optically thin conditions but still much smaller than values as high as {approx}29 predicted for N{sub 2} photodissociation. Since modeled photodissociation isotope effects overpredict the HC{sup 15}N/HC{sup 14}N ratio in Titan's atmosphere, and since both N atoms and N{sub 2} {sup +} ions may ultimately lead to the formation of HCN, estimates of the potential of including N{sub 2} photoionization to contribute to a more quantitative explanation of {sup 15}N/{sup 14}N for HCN in Titan's atmosphere are explored.

74 ATOMIC AND MOLECULAR PHYSICS↗

Photoluminescence properties and crystallization of silicon quantum dots in hydrogenated amorphous Si-rich silicon carbide films

Silicon quantum dots (QDs) embedded in hydrogenated amorphous Si-rich silicon carbide (α-SiC:H) thin films were realized by plasma-enhanced chemical vapor deposition process and post-annealing. Fluorescence spectroscopy was used to characterize the room-temperature photoluminescence properties. X-ray photoelectron spectroscopy was used to analyze the element compositions and bonding configurations. Ultraviolet visible spectroscopy, Raman scattering, and high-resolution transmission electron microscopy were used to display the microstructural properties. Photoluminescence measurements reveal that there are six emission sub-bands, which behave in different ways. The peak wavelengths of sub-bands P1, P2, P3, and P6 are pinned at about 425.0, 437.3, 465.0, and 591.0 nm, respectively. Other two sub-bands, P4 is red-shifted from 494.6 to 512.4 nm and P5 from 570.2 to 587.8 nm with temperature increasing from 600 to 900 °C. But then are both blue-shifted, P4 to 500.2 nm and P5 to 573.8 nm from 900 to 1200 °C. The X-ray photoelectron spectroscopy analysis shows that the samples are in Si-rich nature, Si-O and Si-N bonds consumed some silicon atoms. The structure characterization displays that a separation between silicon phase and SiC phase happened; amorphous and crystalline silicon QDs synthesized with increasing the annealing temperature. P1, P2, P3, and P6 sub-bands are explained in terms of defect-related emission, while P4 and P5 sub-bands are explained in terms of quantum confinement effect. A correlation between the peak wavelength shift, as well as the integral intensity of the spectrum and crystallization of silicon QDs is supposed. These results help clarify the probable luminescence mechanisms and provide the possibility to optimize the optical properties of silicon QDs in Si-rich α-SiC: H materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of deposition temperature on the structural and optical properties of CdSe QDs thin films deposited by CBD method

Highlights: • Synthesis of CdSe QDs with L-Cysteine capping agent for applications in nanodevices. • The films of CdSe QDs present uniform and good dispersive particles at the surface. • Effect of bath temperature on the structural and optical properties of CdSe QDs thin films. • Investigation of the optical constants and dispersion parameters of CdSe QDs thin films. - Abstract: Cadmium selenide quantum dots (CdSe QDs) thin films were deposited onto glass substrates by a chemical bath deposition (CBD) method at different temperatures from an aqueous solution containing L-Cysteine (L-Cys) as capping agent. The evolution of the surface morphology and elemental composition of the CdSe films were studied by AFM, SEM, and EDX analyses. Structural and optical properties of CdSe thin films were investigated by XRD, UV–vis and PL spectroscopy. The dispersion behavior of the refractive index is described using the single oscillator Wemple-DiDomenico (W-D) model, and the physical dispersion parameters are calculated as a function of deposition temperature. The dispersive optical parameters such as average oscillator energy (E{sub o}), dispersion energy (E{sub d}), and static refractive index (n{sub o}) were found to vary with the deposition temperature. Besides, the electrical free carrier susceptibility (χ{sub e}) and the carrier concentration of the effective mass ratio (N/m*) were evaluated according to the Spitzer-Fan model.

36 MATERIALS SCIENCE↗