Research in gas-surface interaction. part ii- a shock tube driven molecular beam for gas-surface interaction experiments final report, 1964-1965
Shock tube driven molecular beam for gas-surface interaction experiments
GAS↗
SEARCH · Search NASA
Results for “beam driven”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Fast ignition inertial fusion energy using laser-driven ion beams
Ion fast ignition (IFI), or fusion fast ignition initiated by a laser-driven ion beam, is a promising path to high-gain inertial fusion energy (IFE). In IFI, cold, dense deuterium-tritium (DT) fuel is first assembled using lasers or pulsed power drivers. Then, a high-power ion beam is focused onto a small volume within the fuel (the hot spot), heating the fuel rapidly to conditions where fusion ignition takes place. Fusion burn in this hot spot propagates to the fuel surrounding the hot spot, leading to burnup of a significant fraction of this fuel and the possibility of high gain (G~100), as needed for inertial fusion energy. IFI uses separate drivers for the two basic elements, fuel compression and ignition, allowing maximum control and optimization of each. On the other hand, conventional laser fusion uses multiple beams of the same driver to compress the fuel and shock-heat its very center to ignite a burn wave. Despite impressive progress in conventional laser fusion, the precise spatial symmetry, temporal pulse shaping and timing required for high gain and IFE remain a serious unmet challenge.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
Characterization and automated optimization of laser-driven proton beams from converging liquid sheet jet targets
Compact, stable, and versatile laser-driven ion sources hold great promise for applications ranging from medicine to materials science and fundamental physics. While single-shot sources have demonstrated favorable beam properties, including the peak fluxes necessary for several applications, high-repetition-rate operation will be necessary to generate and sustain the high average flux needed for many of the most exciting applications of laser-driven ion sources. Further, to navigate through the high-dimensional space of laser and target parameters toward experimental optima, it is essential to develop ion acceleration platforms compatible with machine learning techniques and capable of autonomous real-time optimization. Here, we present a multi-Hz ion acceleration platform employing a liquid sheet jet target. We characterize the laser-plasma interaction and the laser-driven proton beam across a variety of key parameters governing the interaction using an extensive suite of online diagnostics. We also demonstrate real-time, closed-loop optimization of the ion beam maximum energy by tuning the laser wave front using a Bayesian optimization scheme. This approach increased the maximum proton energy by 11% compared to a manually optimized wave front by enhancing the energy concentration within the laser focal spot, demonstrating the potential for closed-loop optimization schemes to tune future ion accelerators for robust high-repetition-rate operation.
Glenn, G. D. [SLAC National Accelerator Laboratory↗
Diagnosing the DARHT Electron Beam-Target Interaction and Hydrodynamic Expansion [Dissertation]
Quantitative electron beam-target interaction studies on the Dual-Axis Radiographic Hydrodynamic Test (DARHT) electron linear induction accelerators have only been performed recently. This includes characterization of the temperature, density, pressure, extent, and expansion velocity of the plasma plume. The results presented in this dissertation present a detailed and unified overview of the accelerator systems, target heating physics, beam transport, and diagnostic tools. Additional information includes calibration sources, radiation hydrodynamics, spectroscopic-quality radiation transport modeling, experimental measurements, and analyses of electron beam driven aluminum experiments. The first set of spatially and temporally resolved spectroscopic measurements of electron beam driven aluminum are presented. Contamination quantification analyses are used to understand the origin of the strong Na-I 3p-3s lines that are observed in absorption within the aluminum plasma continuum. These results inform the creation of the first spectroscopic-quality radiation transport model that links several atomic physics codes to interpret the conditions from which the Na-I lines originate. A good agreement is found between the surface analysis results and the model which confirms the concentration of the sodium present within the aluminum alloy foil material. It also demonstrates, for the first time on electron beam-driven target experiments, the ability to interpret plasma conditions from measured absorption lines. In a second experimental campaign which focuses on pure aluminum, the Al-I 3p-4s and 3p3d doublets are both measured in emission. A detailed analysis of the Al-I 3p-4s doublet reveals that the lines undergo moderate self-absorption. A simple model of the self-absorption effect is successfully used to match measured spectra at various temperature/density/plasma scale length combinations. These measurements led to the realization of the minimum density that can be resolved by the spectrometers for the Al-I 3p-4s lines due to the large slit width required to observe a signal on aluminum. These measurements also demonstrate the sensitivity of visible and long wave UV spectroscopy to minor changes in both temperature and density. The simple self-absorption model will be useful for analysis of other beam-target interaction experiments with spectra exhibiting either self-absorption or full self-reversal. Substantial headway has been made on the modeling front by linking together several codes needed to model both the energy deposition, hydrodynamic motion, and atomic kinetics to produce synthetic spectral calculations that are compared with experimental measurements. There exists ample space for improvement, especially with benchmarking the hydrodynamics codes and equation-of-state tables with experimental measurements. The X-ray diagnostics required to make these new measurements along with the simulation capabilities required to interpret the results are under development and will be the subject of future studies.
43 PARTICLE ACCELERATORS↗
Anomalous material-dependent transport of focused, laser-driven proton beams
Intense lasers can accelerate protons in sufficient numbers and energy that the resulting beam can heat materials to exotic warm (10s of eV temperature) states. Here we show with experimental data that a laser-driven proton beam focused onto a target heated it in a localized spot with size strongly dependent upon material and as small as 35 mm radius. Simulations indicate that cold stopping power values cannot model the intense proton beam transport in solid targets well enough to match the large differences observed. In the experiment a 74 J, 670 f s laser drove a focusing proton beam that transported through different thicknesses of solid Mylar, Al, Cu or Au, eventually heating a rear, thin, Au witness layer. The XUV emission seen from the rear of the Au indicated a clear dependence of proton beam transport upon atomic number, Z, of the transport layer: a larger and brighter emission spot was measured after proton transport through the lower Z foils even with equal mass density for supposed equivalent proton stopping range. Beam transport dynamics pertaining to the observed heated spot were investigated numerically with a particle-in-cell (PIC) code. In simulations protons moving through an Al transport layer result in higher Au temperature responsible for higher Au radiant emittance compared to a Cu transport case. As a result, the inferred finding that proton stopping varies with temperature in different materials, considerably changing the beam heating profile, can guide applications seeking to controllably heat targets with intense proton beams.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Free electron lasers driven by plasma accelerators: status and near-term prospects
Owing to their ultra-high accelerating gradients, combined with injection inside micrometer-scale accelerating wakefield buckets, plasma-based accelerators hold great potential to drive a new generation of free-electron lasers (FELs). Indeed, the first demonstration of plasma-driven FEL gain was reported recently, representing a major milestone for the field. Several groups around the world are pursuing these novel light sources, with methodology varying in the use of wakefield driver (laser-driven or beam-driven), plasma structure, phase-space manipulation, beamline design, and undulator technology, among others. This paper presents our best attempt to provide a comprehensive overview of the global community efforts towards plasma-based FEL research and development.
47 OTHER INSTRUMENTATION↗
Multispectral observations of chromospheric evaporation in the 1991 November 15 X-class solar flare
We analyze simultaneous H(alpha) images and spectra (from Mees Solar Observatory), and soft and hard X-ray images and spectra (from YOHKOH) during the early phase of an X1.5/3B flare. We investigate the morphological relationship between chromospheric downflows, coronal upflows, and particle precipitation sites, and the energetic relationship between conductive heating, nonthermal particle heating, and the chromospheric response. We find that the observations consistently fit the chromospheric evaporation model. In particular, we demonstrate that the observed upflowing coronal and downflowing chromospheric plasma components originate in the same locations, and we show that our unique set of optical and X-ray observations can clearly distinguish between conductively driven and electron beam driven evaporation.
Wulser, Jean-Pierre↗
Theory and simulation of collisionless parallel shocks
This paper presents a self-consistent theoretical model for collisionless parallel shock structure, based on the hypothesis that shock dissipation and heating can be provided by electromagnetic ion beam-driven instabilities. It is shown that shock formation and plasma heating can result from parallel propagating electromagnetic ion beam-driven instabilities for a wide range of Mach numbers and upstream plasma conditions. The theoretical predictions are compared with recently published observations of quasi-parallel interplanetary shocks. It was found that low Mach number interplanetary shock observations were consistent with the explanation that group-standing waves are providing the dissipation; two high Mach number observations confirmed the theoretically predicted rapid thermalization across the shock.
Quest, K. B.↗
Nonlinear Electrostatic Steepening of Whistler Waves: The Guiding Factors and Dynamics in Inhomogeneous Systems
Whistler mode chorus waves are particularly important in outer radiation belt dynamics due to their key role in controlling the acceleration and scattering of electrons over a very wide energy range. The efficiency of wave-particle resonant interactions is defined by whistler wave properties which have been described by the approximation of plane linear waves propagating through the cold plasma of the inner magnetosphere. However, recent observations of extremely high-amplitude whistlers suggest the importance of nonlinear wave-particle interactions for the dynamics of the outer radiation belt. Oblique chorus waves observed in the inner magnetosphere often exhibit drastically nonsinusoidal (with significant power in the higher harmonics) waveforms of the parallel electric field, presumably due to the feedback from hot resonant electrons. We have considered the nature and properties of such nonlinear whistler waves observed by the Van Allen Probes and Time History of Events and Macroscale Interactions define during Substorms in the inner magnetosphere, and we show that the significant enhancement of the wave electrostatic component can result from whistler wave coupling with the beam-driven electrostatic mode through the resonant interaction with hot electron beams. Being modulated by a whistler wave, the electron beam generates a driven electrostatic mode significantly enhancing the parallel electric field of the initial whistler wave. Finally, we confirm this mechanism using a self-consistent particle-in-cell simulation. The nonlinear electrostatic component manifests properties of the beam-driven electron acoustic mode and can be responsible for effective electron acceleration in the inhomogeneous magnetic field.
58 GEOSCIENCES↗
The mapping & avoidance of high order cavity modes
In this paper a technique developed in 2016 is presented for mapping the multidimensional, multi-mode high order mode landscape of a beam driven super conducting RF cavity. The initial use case for this technique was intended to allow longitudinal gradient control of a beam driven super conducting cavity while simultaneously avoiding many dangerous high order modes and excessive component stresses. This paper will focus on the stability and component stress considerations of the 56MHz superconducting cavity, located in the 4 o’clock sector interaction region of the Relativistic Heavy Ion Collider (RHIC) at Brookhaven National Laboratory. The 56MHz cavity is intended to work in conjunction with the Stochastic Cooling system to improve the longitudinal confinement in the central 197MHz RF bucket and thus increase the integrated luminosity during heavy ion beam runs at RHIC.
43 PARTICLE ACCELERATORS↗
Role of fast-ion transport manipulating safety factor profile in KSTAR early diverting discharges
Magnetohydrodynamics (MHD) activity is analyzed for a particular KSTAR discharge category, the main features of which are a high-$q_\mathrm{min}$ and a broad q profile. An interesting finding in this scenario is that a steady-state high-$q_\mathrm{min}$ and broad q profile has been constructed even without a strong off-axis current drive scheme. Time traces of magnetics spectrograms and electron cyclotron emission imaging (ECEI) clearly show that Alfvénic type MHD activity appears as a high-$q_\mathrm{min}$ and broad q profile is formed. Conversely, this activity disappears as the current profiles evolve toward a low-$q_\mathrm{min}$ profile. In this study, the effect of MHD modes and accompanying fast-particle transport on the formation of various current profiles is explored. The frequency patterns of the magnetics spectrograms and ECEI coherence are compared using a NOVA analysis to determine which series of Alfvénic modes are active. Then, the kick-model is applied to potential modes, and used to estimate how much fast-ions are transported and beam driven current profiles are varied. Here, by comparing the reconstructed total current profile from the kinetic EFIT with the beam-driven current profile estimated from the kick model, it is determined how energetic particle transport is responsible for maintaining the safety factor profile and which q profile can provide high β N operation.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Multiple Beam Triode Driven RF Sources for Accelerator Applications Phase I Final Report
Calabazas Creek Research, Inc, (CCR), in collaboration with Microwave Power Products, Inc. (MPP), formerly Communications & Power Industries, LLC (CPI,) and JP Accelerator Works, Inc. (JPAW), embarked on a program to develop multiple beam triodes to produce RF power from 350 – 800 MHz with an average power exceeding 200 kW. The effort was motivated by the performance of a triode-based RF source which produces 25 kW of UHF power at 90% efficiency. The CCR effort focused on implementing this technology into a multiple beam device to increase the output power while retaining the low cost, compact size, and high efficiency. The program performed extensive simulations indicating that the goals could be achieved, and a prototype multiple beam triode was built, baked, and tested. Unfortunately, a grid to cathode short terminated the testing before the tube could generate RF power. Nevertheless, the effort demonstrated that a multiple beam triode could be designed, built, baked, and energized to high voltage. The multiple beam triode used oxide cathodes, which are only capable of pulsed operation. The multiple beam triode will be rebuilt using dispenser cathodes, which will allow high duty or continuous operation. The grids were also modified to be more robust to avoid previous issues. The MB triode will provide the beam power for RF generation. The RF is generated by surrounding the triode with input and output cavities to convert beam power to RF power. RF cavities to generate 200 kW CW at 350-450 MHz using the MB triode with dispenser cathodes was assembled during the program. The next Phase of this effort is to assemble the multiple beam triode using the subassemblies built in the Phase I program and test with the RF cavities. The Phase I program also initiated design of a higher frequency, higher power multiple beam triode. That design is forecast to produce approximately 500 kW CW from 350 - 500 MHz.
43 PARTICLE ACCELERATORS↗
Electromagnetic beam modes driven by anisotropic electron streams
A theory is presented which provides an explanation for recent laboratory observations of a 'new electromagnetic' mode in a non-Maxwellian high-beta plasma' and suggests a likely relevance of these modes to space plasmas. Unstable parallel-propagating waves, which can be beam modes or whistlers, depending mainly on the degree of velocity anisotropy in a weak electron beam, are found. In the beam-mode limit relevant to the experiment, this is a kinetic Weibel instability, enhanced by a parallel magnetic field. The frequency of the mode can be above or below the electron cyclotron frequency.
Goldman, Martin V.↗
Absolute calibration of GafChromic film for very high flux laser driven ion beams
We report on the calibration of GafChromic HD-v2 radiochromic film in the extremely high dose regime up to 100 kGy together with very high dose rates up to 7 × 10 11 Gy/s. The absolute calibration was done with nanosecond ion bunches at the Neutralized Drift Compression Experiment II particle accelerator at Lawrence Berkeley National Laboratory (LBNL) and covers a broad dose dynamic range over three orders of magnitude. We then applied the resulting calibration curve to calibrate a laser driven ion experiment performed on the BELLA petawatt laser facility at LBNL. Here, we reconstructed the spatial and energy resolved distributions of the laser-accelerated proton beams. The resulting proton distribution is in fair agreement with the spectrum that was measured with a Thomson spectrometer in combination with a microchannel plate detector.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Maximum Langmuir Fields in Planetary Foreshocks Determined from the Electrostatic Decay Threshold
Maximum electric fields of Langmuir waves at planetary foreshocks are estimated from the threshold for electrostatic decay, assuming it saturates beam driven growth, and incorporating heliospheric variation of plasma density and temperature. Comparisons with spacecraft observations yields good quantitative agreement. Observations in type 3 radio sources are also in accord with this interpretation. A single mechanism can thus account for the highest fields of beam driven waves in both contexts.
Robinson, P. A.↗
Beam dynamics driven design of powerful energy recovery linac for experiments
Powerful ERL for experiments (PERLE) is a novel energy recovery linac (ERL) test facility [1], designed to validate choices for a 50 GeV ERL foreseen in the design of the Large Hadron Electron Collider and the Future Circular Collider and to host dedicated nuclear and particle physics experiments. Its main goal is to demonstrate the high current, continuous wave, multipass operation with superconducting cavities at 802 MHz. With very high beam power (10 MW), PERLE offers an opportunity for controllable study of every beam dynamic effect of interest in the next generation of ERLs and becomes a “stepping stone” between the present state-of-the-art 1 MW ERLs and the future 100 MW scale applications. Published by the American Physical Society 2024
43 PARTICLE ACCELERATORS↗
Numerical studies of collinear laser-assisted injection from a foil for plasma wakefield accelerators
We present a laser-assisted electron injection scheme for beam-driven plasma wakefield acceleration. The laser is collinear with the driver and triggers the injection of hot electrons into the plasma wake by interaction with a thin solid target. We present a baseline case using the AWAKE Run 2 parameters and then perform variations on key parameters to explore the scheme. It is found that the trapped witness electron charge may be tuned by altering laser parameters, with a strong dependence on the phase of the wake upon injection. Normalized emittance settles at the order of micrometres and varies with witness charge. The scheme is robust to misalignment, with a 1/10th plasma skin-depth offset ( 20 μ m for the AWAKE case) having a negligible effect on the final beam. The final beam quality is better than similar existing schemes, and several avenues for further optimization are indicated. The constraints on the AWAKE experiment are very specific, but the general principles of this mechanism can be applied to future beam-driven plasma wakefield accelerator experiments. Published by the American Physical Society 2024
Physics↗
A hybrid nodal-staggered pseudo-spectral electromagnetic particle-in-cell method with finite-order centering
Electromagnetic particle-in-cell (PIC) codes are widely used to perform computer simulations of a variety of physical systems, including fusion plasmas, astrophysical plasmas, plasma wakefield particle accelerators, and secondary photon sources driven by ultra-intense lasers. In a PIC code, Maxwell's equations are solved on a grid with a numerical method of choice. This article focuses on pseudo-spectral analytical time-domain (PSATD) algorithms and presents a novel hybrid PSATD PIC scheme that combines the respective advantages of standard nodal and staggered methods. The novelty of the hybrid scheme consists in using finite-order centering of grid quantities between nodal and staggered grids, in order to combine the solution of Maxwell's equations on a staggered grid with the deposition of charges and currents and the gathering of electromagnetic forces on a nodal grid. The correctness and performance of the novel hybrid scheme are assessed by means of numerical tests that employ different classes of PSATD equations in a variety of physical scenarios, ranging from the modeling of electron-positron pair creation in vacuum to the simulation of laser-driven and particle beam-driven plasma wakefield acceleration. It is shown that the novel hybrid scheme offers significant numerical and computational advantages, compared to purely nodal or staggered methods, for all the test cases presented.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗