SEARCH · Search NASA

Results for “behavioral influences”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRS1976

Structure-property relationships in block copolymers

Block copolymers are a class of relatively new materials which contain long sequences of two (or more) chemically different repeat units. Unlike random copolymers, each segment may retain some properties which are characteristic of its homopolymer. It is well known that most physical blends of two different homopolymers are incompatible on a macro-scale. By contrast most block copolymers display only a microphase (eg. 100-200 A domains) separation. Complete separation is restricted because of a loss in configurational entropy. The latter is due to presence of chemical bond(s) between the segments. Novel physical properties can be obtained because it is possible to prepare any desired combination of rubber-like, glassy, or crystalline blocks. The architecture and sequential arrangement of the segments can strongly influence mechanical behavior.

Mcgrath, J. E.↗

NASA NTRS1978

Influence of free-stream disturbances on boundary-layer transition

Considerable experimental evidence exists which shows that free stream disturbances (the ratio of root-mean-square pressure fluctuations to mean values) in conventional wind tunnels increase with increasing Mach number at low supersonic to moderate hypersonic speeds. In addition to local conditions, the free stream disturbance level influences transition behavior on simple test models. Based on this observation, existing noise transition data obtained in the same test facility were correlated for a large number of reference sharp cones and flat plates and are shown to collapse along a single curve. This result is a significant improvement over previous attempts to correlate noise transition data.

Harvey, W. D.↗

NASA NTRS1980

Aerodynamic aspects of shock containing jet plumes

Aerodynamic and acoustic measurements of shock-free and shock-containing plumes were acquired for several supersonic free-jet model nozzles. The purpose was to investigate important features of the broadband shock noise generation process. The aerodynamic measurements include the variation of shock cell spacing and strength as a function of nozzle pressure ratio, and longitudinal turbulent-mass-flux axial development as determined by a hot-film probe. In addition, correlations of the hot-film probe with a near-field microphone were obtained. These measurements provide useful information concerning the relation of peak shock noise frequency and level with variations in shock cell spacing and strength. In general, it is shown that a distinction must be made between plumes containing weak and strong imbedded shocks. Strong shocks diminish the level of emitted shock noise and influence the behavior of the jet mixing noise process. The probable location and spectral content for the shock-shear layer interaction mechanism is indicated by the correlations. Numerical inviscid plume comparisons with experimental data are also included.

Seiner, J. M.↗

NASA NTRS1983

Magnetic drifts at Io - Depletion of 10-MeV electrons at Voyager 1 encounter due to a forbidden zone

A model for magnetic field lines is used to track the Voyager spacecraft trajectory past Io back to the equatorial plane in order to determine the cause of an observed depletion of 10 MeV electrons in Io's orbit. The field lines are in the vicinity of an Alfven wing, a noncompressive field perturbation. It is suggested that the Jovian magnetospheric drift features influence the behavior of particles around Io, which also has a zone of reduced convection velocity. An analytical model is developed that demonstrates that a forbidden zone may exist around Io due to the gradient drifts and reduced convection velocity, and projections of particles convecting to the Io surface agree well with the Voyager data for particle concentrations. Discrepancies in the measured 9 MeV fluxes with respect to Pioneer data indicate that a possible change in the Io conductance in the interval between the passages of the two spacecraft.

Goldstein, B. E.↗

NASA NTRS1984

An Analysis of Wave Interactions in Swept-Wing Flows

Crossflow instabilities dominate disturbance growth in the leading-edge region of swept wings. Streamwise vortices in a boundary layer strongly influence the behavior of other disturbances. Amplification of crossflow vortices near the leading edge produces a residual spanwise nonuniformity in the mid-chord regions where Tollmien-Schlichting (T-S) waves are strongly amplified. Should the T-S wave undergo double-exponential growth because of this effect, the usual transition prediction methods would fail. The crossflow/Tollmien-Schlichting wave interaction was modeled as a secondary instability. The effects of suction are included, and different stability criteria are examined. The results are applied to laminar flow control wings characteristic of energy-efficient aircraft designs.

Reed, H. L.↗

NASA NTRS1984

Wave interactions in swept-wing flows

Crossflow instabilities dominate disturbance growth in the leading-edge region of swept wings. It is well known that streamwise vortices in a boundary layer strongly influence the behavior of other disturbances. Amplification of crossflow vortices near the leading edge produces a residual spanwise nonuniformity in the mid-chord regions where Tollmien-Schlichting (T-S) waves are strongly amplified. Should the T-S wave undergo double-exponential growth because of this effect, the usual transition prediction methods would fail. Thus, it is important to study interactions of this sort and to develop more realistic criteria for transition prediction.

Reed, H. L.↗

NASA NTRS1986

High temperature monotonic and cyclic deformation in a directionally solidified nickel-base superalloy

Directionally solidified (DS) MAR-M246+Hf was tested in tension and fatigue, at temperatures from 20 C to 1093 C. Tests were performed on (001) oriented specimens at strain rates of 50 % and 0.5 % per minute. In tension, the yield strength was constant up to 704 C, above which the strength dropped off rapidly. A strong dependence of strength on strain rate was seen at the higher temperatures. The deformation mode was observed to change from heterogeneous to homogeneous with increasing temperature. Low Cycle Fatigue tests were done using a fully reversed waveform and total strain control. For a given plastic strain range, lives increased with increasing temperature. For a given temperature strain rate had a strong effect on life. At 704 C, decreasing strain rates decreased life, while at the higher temperatures, decreasing strain rates increased life, for a given plastic strain range. These results could be explained through considerations of the deformation modes and stress levels. At the higher temperatures, marked coarsening caused beneficial stress reductions, but oxidation limited the life. The longitudinal grain boundaries were found to influence slip behavior. The degree of secondary slip adjacent to the boundaries was found to be related to the degree of misorientation between the grains.

Huron, Eric S.↗

NASA NTRS1986

Influences on corporate executive decision behavior in government acquisitions

This paper presents extensive exploratory research which had as its primary objective, the discovery and determination of major areas of concern exhibited by U.S. corporate executives in the preparation and submittal of proposals and bids to the Federal government. The existence of numerous unique concerns inherent in corporate strategies within the government market environment was established. A determination of the relationship of these concerns to each other was accomplished utilizing statistical factor analysis techniques resulting in the identification of major groupings of management concerns. Finally, using analysis of variance, an analysis and discovery of the interrelationship of the factors to corporate demographics was accomplished. The existence of separate and distinct concerns exhibited by corporate executives when contemplating sales and operations in the government marketplace was established. It was also demonstrated that quantifiable relationships exist between such variables and that the decision behavior exhibited by the responsible executives has an interrelationship to their company's demographics.

Wetherington, J. R.↗

NASA NTRS1987

Composite box beam analysis - Theory and experiments

Beam theory is widely used as a first approximation in numerous structural applications. When applied to composite beams, the accuracy of beam theory becomes questionable because (1) the shearing and warping deformations become significant, as the shearing stiffness of composite laminates is often very low, and (2) several elastic couplings can occur that strongly influence the behavior of composite beams. The torsional behavior of thin-walled composite beams has important implications for aeronautical structures and is deeply modified by the above nonclassical effects. This paper presents two comprehensive analysis methodologies for composite beams and describes experimental results obtained from a thin-walled, rectangular cross-sectional beam. The theoretical predictions are found in good agreement with the observed twist and strain distributions. Out-of-plane torsional warping of the cross-section is found to be the key factor for an accurate modeling of the torsional behavior of such structures.

Bauchau, O. A.↗

NASA NTRS1990

METCAN verification status

The status of the verification (comparisons of predictions with experimental data) of the METCAN (METal-matrix Composite ANalyzer) code at high temperature is summarized. Verification includes select available room temperature of W/Cu composites for different fiber volume ratios. It also includes high temperature properties for thermal expansion, moduli, strength and stress/strain behavior for SiC/Ti composites. Furthermore it includes limited cases for thermal fatigue strength degradation. The verification results summarized herein indicate that METCAN simulates complex high temperature metal matrix composite bahavior with reasonable accuracy and that it can be used with confidence to identify in-situ nonlinear behavior that influences composite properties.

Chamis, Christos C.↗

NASA NTRS1991

Nonlinear Reynolds stress model for turbulent shear flows

A nonlinear algebraic Reynolds stress model, derived using the renormalization group, is applied to equilibrium homogeneous shear flow and fully developed flow in a square duct. The model, which is quadratically nonlinear in the velocity gradients, successfully captures the large-scale inhomogeneity and anisotropy of the flows studied. The ratios of normal stresses, as well as the actual magnitudes of the stresses are correctly predicted for equilibrium homogeneous shear flow. Reynolds normal stress anisotropy and attendant turbulence driven secondary flow are predicted for a square duct. Profiles of mean velocity and normal stresses are in good agreement with measurements. Very close to walls, agreement with measurements diminishes. The model has the benefit of containing no arbitrary constants; all values are determined directly from the theory. It seems that near wall behavior is influenced by more than the large scale anisotropy accommodated in the current model. More accurate near wall calculations may well require a model for anisotropic dissipation.

Barton, J. Michael↗

NASA NTRS1994

Stationary premixed flames in spherical and cylindrical geometries

Stationary source-free spherical flames ('flame balls') in premixed combustible gases were studied by employing low-gravity (micro-g) environments in a drop tower and an aircraft flying parabolic trajectories to diminish the impact of buoyancy-induced convective flow. Flame balls were found in all mixture families tested when: (1) the Lewis number Le of the deficient reactant was sufficiently low; and (2) the compositions were sufficiently close to the flammability limits. Probably as a consequence of the reduction in buoyant convection, the flammability limits at micro-g were significantly more dilute than those at Earth gravity; for example, 3.35% H2 vs 4.0% H2 in lean H2-air mixtures. By comparison with analytical and computational models, it is inferred that the phenomenon is probably related to diffusive-thermal effects in low-Le mixtures in conjunction with flame-front curvature and radiative heat losses from the combustion products. The chemical reaction mechanism appears to play no qualitative role. In the aircraft experiments, the gravity levels (approximately equal 10(exp -2)g(sub 0)) were found to cause noticeable motion of flame balls due to buoyancy, which in turn influenced the behavior of flame balls. At these g levels, a new type of transient, nearly cylindrical flame structure, termed 'flame strings,' was observed.

Ronney, P. D.↗

NASA NTRS1994

Navier-Stokes prediction of large-amplitude forced and free-to-roll delta-wing oscillations

The three-dimensional Reynolds-averaged, Navier-Stokes (RANS) equations are used to numerically simulate nonsteady vortical flow about a 65 degree sweep delta wing at 30 degrees angle of attack. Two large-amplitude, high-rate, forced-roll motions and a damped free-to-roll motion are presented. The free-to-roll motion is computed by coupling the time-dependent RANS equations to the flight dynamic equation of motion. The computed results are compared with experimental forces, moments, and roll-angle time histories. The overall agreement is good. Vortex breakdown is present in each case, which causes significant time lags in the vortex breakdown motions relative to the body motions. This behavior strongly influences the dynamic forces and moments.

Chaderjian, Neal M.↗

NASA NTRS2000

Parametric Study of Reactive Melt Infiltration

Reactive melt infiltration is viewed as a promising means of achieving near-net shape manufacturing with quick processing time and at low cost. Since the reactants and products are, in general, of varying density, overall conservation of mass dictates that there is a force related to chemical conversion which can directly influence infiltration behavior. In effect, the driving pressure forces may compete with the forces from chemical conversion, affecting the advancement of the front. We have developed a two-dimensional numerical code to examine these effects, using reaction-formed silicon carbide as a model system for this process. We have examined a range of initial porosities, pore radii, and reaction rates in order to investigate their effects on infiltration dynamics.

Nelson, Emily S.↗

NASA NTRS2003

Computational Materials: Modeling and Simulation of Nanostructured Materials and Systems

The paper provides details on the structure and implementation of the Computational Materials program at the NASA Langley Research Center. Examples are given that illustrate the suggested approaches to predicting the behavior and influencing the design of nanostructured materials such as high-performance polymers, composites, and nanotube-reinforced polymers. Primary simulation and measurement methods applicable to multi-scale modeling are outlined. Key challenges including verification and validation of models are highlighted and discussed within the context of NASA's broad mission objectives.

Gates, Thomas S.↗

NASA NTRS2003

Elimination of Gravity Influence on Flame Propagation Via Enhancement of the Saffman-Taylor Instability

In this analytical work the influence of the Saffman-Taylor instability on flame propagation is formulated for computational investigation. Specifically, it is of interest to examine the influence of this instability as a potential means of eliminating the effect of gravitational acceleration on the development of thermoacoustic instability. Earlier experimental investigations of thermoacoustic instability employed tubes of large circular or annular cross-section, such that neither heat loss nor viscosity at the burner walls was of significant importance in influencing flame behavior. However, it has been demonstrated recently that flames propagating between closely spaced walls, may be subject to long-wavelength wrinkling associated with the Saffman-Taylor instability, known to be relevant when a less-viscous fluid pushes a more-viscous fluid through a porous medium or between two closely spaced walls.

Aldredge, R. C.↗

NASA NTRS2008

The Pioneer Anomaly and a Rotating Godel Universe

The Pioneer Anomaly represents an intriguing problem for fundamental physics whose scope still seems to baffle the best of explanations. It involves one of the most precise fine-scale acceleration measurements possible in the space age as the Pioneer 10/11 spacecraft reached distances of 20-70 AU from the Sun. An anomalous acceleration directed back toward the Sun of approx. 8x10(exp -10) m/sq s was discovered. The problem will be summarized and an up-to-date overview of possible explanations for this surprising result will be given. It may even be possible that our cosmic environment such as expansion dynamics and/or dark energy could be influencing the behavior of planets and spacecrafts within our local solar system. Then a new possibility, that of a rotating Godel Universe, will be introduced and examined.

Wilson, Thomas↗

NASA NTRS2007

Global Observations - The Key to Model Development and Improved Assessments

One application of global models is to predict the response of stratospheric ozone to changes in composition and climate. The recent international ozone assessment included results from three-dimensional models with interactions among the dynamical, photochemical and radiative processes that all influence ozone behavior. The physical basis of such models is far more realistic than that of either the one-dimensional (single profile) models of the 1970's and early 1980's or the two-dimensional (latitude height) models of the late 1980's and 1990's. Observations have played a key role in the model development at all stages. This talk will highlight the role of observations in inspiring broad model improvements that have grown from the effort to reproduce observed relationships or processes, for example the correlations between long-lived constituents seen in aircraft data and the deep unmixed descent of mesospheric air into the winter polar vortices seen from satellite. The talk will also trace the evolution of model evaluation from contour plots showing 'good agreement' to the more rigorous process-oriented evaluation of three-dimensional models that is becoming the norm using the wealth of space-based observations obtained from the late 1970's until present.

Douglass, Anne R.↗