Search NASA⌕ Search

SEARCH · Search NASA

Results for “bimetallic structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Temporal Ni K-Edge X-ray Absorption Spectroscopy Study Reveals the Kinetics of the Ni Redox Behavior of the Iron-Nickel Oxide Bimetallic OER Catalyst

Operando X-ray absorption spectroscopy (XAS) can be utilized to probe the phase and structural changes of FeNiOx and similar transition metal oxide electrocatalysts during electrocatalytic reactions. However, capturing the temporal changes occurring in the operando chemistry of electrocatalysts has been little studied. Here, in this work, we successfully capture the time-resolved changes at the Ni K-edge for both the X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) regions of an aqueous phase synthesized FeNiO x bimetallic nanoparticle electrocatalyst. During a stepped voltage experiment, the temporal change in the Ni K-edge was observed as the applied voltage was stepped from 0.7 to 0.8 V versus the silver/silver chloride reference electrode, and the change observed is associated with the Ni redox transition from the 2+ to 3+/4+ oxidation state. Individual XAS spectra were obtained in 90 s, and a total of 9 scans post voltage step showed a unique transition from a hydroxide to an oxyhydroxide phase. The shift in absorption edge energy position and the changes in spectral shape for individual scans explain the typically observed broadening of the Ni K-edge XANES spectrum during time-averaged operando XAS, and a kinetic analysis revealed a first-order observed rate constant, |k obs |, of 0.00426 s –1 and a half-life (t 1/2 ) of 163 s. Multivariate curve resolution-alternating least squares analysis followed by linear combination fitting analysis for time-averaged versus time-resolved Ni K-edge changes upon voltage step show distinct differences in estimated contributions from Ni 2+ oxide/hydroxide phases. Detailed EXAFS modeling shows the phase transition from hydroxide to oxyhydroxide on top of the unchanged metallic core.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2007

Removal of PCB and other halogenated organic contaminants found in ex situ structures

Emulsified systems of a surfactant-stabilized, biodegradable water-in-solvent emulsion with bimetallic particles contained with the emulsion droplets are useful at removing PCBs from ex situ structures. The hydrophobic emulsion system draws PCBs through the solvent/surfactant membrane. Once inside the membrane, the PCBs diffuse into the bimetallic particles and undergo degradation. The PCBs continue to enter, diffuse, degrade, and biphenyl will exit the particle maintaining a concentration gradient across the membrane and maintaining a driving force of the reaction.

Quinn, Jacqueline↗
NASA NTRS2007

Removal of PCB and Other Halogenated Organic Contaminants found in Ex Situ Structures

Emulsified systems or a surfactant-stabilized, biodegradable water-in-solvent emulsion with bimetallic particles contained with the emulsion droplets are useful at removing PCBs from ex situ structures. The hydrophobic emulsion system draws PCBs through the solvent/surfactant membrane. Once inside the membrane, the PCBs diffuse into the bimetallic particles and undergo degradation. The PCBs continue to enter, diffuse, degrade, and biphenyl will exit the particle maintaining a concentration gradient across the membrane and maintaining a driving force of the reaction.

Quinn, Jacqueline↗
NASA NTRS2009

Removal of PCB and other halogenated organic contaminants found in ex situ structures

Emulsified systems of a surfactant-stabilized, biodegradable water-in-solvent emulsion with bimetallic particles contained with the emulsion droplets are useful at removing PCBs from ex situ structures. The hydrophobic emulsion system draws PCBs through the solvent/surfactant membrane. Once inside the membrane, the PCBs diffuse into the bimetallic particles and undergo degradation. The PCBs continue to enter, diffuse, degrade, and biphenyl will exit the particle maintaining a concentration gradient across the membrane and maintaining a driving force of the reaction.

Quinn, Jacqueline W.↗
DOE OSTI2022

Improvement of Oxygen Reduction Performance in Alkaline Media by Tuning Phase Structure of Pd–Bi Nanocatalysts

Tuning the crystal phase of bimetallic nanocrystals offers an alternative avenue to improving their electrocatalytic performance. Herein, we present a facile and one-pot synthesis approach that is used to enhance the catalytic activity and stability toward oxygen reduction reaction (ORR) in alkaline media via control of the crystal structure of Pd-Bi nanocrystals. By merely altering the types of Pd precursors under the same conditions, the monoclinic structured Pd 5 Bi 2 and conventional face-centered cubic (fcc) structured Pd 3 Bi nanocrystals with comparable size and morphology can be precisely synthesized, respectively. Interestingly, the carbon-supported monoclinic Pd 5 Bi 2 nanocrystals exhibit superior ORR activity in alkaline media, delivering a mass activity (MA) as high as 2.05 A/mg Pd . After 10,000 cycles of ORR durability test, the monoclinic structured Pd 5 Bi 2 /C nanocatalysts still remain a MA of 1.52 A/mg Pd , which is 3.6 times, 16.9 times, and 21.7 times as high as those of the fcc Pd 3 Bi/C counterpart, commercial Pd/C, and Pt/C electrocatalysts, respectively. Moreover, structural characterizations of the monoclinic Pd 5 Bi 2 /C nanocrystals after the durability test demonstrate the excellent retention of the original size, morphology, composition, and crystal phase, greatly alleviating the leaching of the Bi component. Overall, this work provides new insight for the synthesis of multimetallic catalysts with a metastable phase and demonstrates phase-dependent catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRSDate not supplied

Lightweight Thrust Chamber Assemblies using Multi-Alloy Additive Manufacturing and Composite Overwrap

Additive Manufacturing (AM) has brought significant design and fabrication opportunities for complex components with internal features such as liquid rocket engine thrust chambers not previously possible. This technology allows for significant cost savings and schedule reductions in addition to new performance optimization through weight reduction and increased margins. Specific to regeneratively-cooled combustion chambers and nozzles for liquid rocket engines, additive manufacturing offers the ability to form the complex internal coolant channels and the closeout of the channels to contain the high pressure liquid propellants with a single operation. Much of additive manufacturing development has focused on monolithic alloys using Laser Powder Bed Fusion (L-PBF), which do not allow for complete optimization of the structure. The National Aeronautics and Space Administration (NASA) completed feasibility of an AM bimetallic L-PBF GRCop-84 copper-alloy combustion chamber with an AM electron beam freeform Inconel 625 structural jacket under the Low Cost Upper Stage Propulsion (LCUSP) Project. A follow-on project called Rapid Analysis and Manufacturing Propulsion Technology (RAMPT) is under development to further expand large-scale multi-alloy thrust chambers while maturing composite overwrap technology for significant weight savings opportunities. The RAMPT project has three primary objectives: 1) Advancing blown powder Directed Energy Deposition (DED) to fabricate integral-channel large scale nozzles, 2) Develop composite overwrap technology to reduce weight and provide structural capability for thrust chamber assemblies, and 3) Develop bimetallic and multi-metallic additively manufactured radial and axial joints to optimize material performance. In addition to these primary manufacturing developments, analytical modeling efforts compliment the process development to simulate the AM processes to reduce build failures and distortions. The RAMPT project is also maturing the supply chain for various manufacturing processes described above in addition to L-PBF of GRCop-42. This paper will present an overview of the RAMPT project, the process development and hardware progress to date, material and hot-fire testing results, along with future developments.

Additive Manufacturing↗
DOE OSTI2024

Achieving Metallurgical Bonding in Aluminum/Steel Bimetallic Castings

Abstract Aluminum castings are increasingly being used in automotive powertrain and structural applications for vehicle lightweighting. Cast aluminum parts often need to be machined and joined to steel components in multi-material systems. Bimetallic components produced by casting aluminum over steel substrate are advantageous due to the elimination of machining and traditional dissimilar material joining processes. However, forming a strong metallurgical bonding during overcasting process has been challenging. In this paper, the effects of processing conditions such as substrate surface preparation, pre-heating temperature, melt conditions as well as casting design were studied by investigating the bimetallic interfaces for aluminum A319 casting alloy and a high alloy steel substrate in a sand-casting process. Zn and Al-based substrate coatings were evaluated. The experimental results suggest a metallurgical bond between aluminum and steel can be formed during the sand-casting process via high temperature diffusion with or without coatings. Al-based substrate coating prior to overcasting results in the formation of a continuous layer of intermetallics at the bimetallic interface, with large Al–Si–Fe intermetallics penetrating the cast aluminum.

Moodispaw, Michael P. (ORCID:0000000267635882)↗
NASA NTRS2006

The Ability of AMSTAR Dechlorination Solution to Remove and Degrade PCBs from Contaminated Surfaces

Polychlorinated biphenyls (PCBs) are a group of synthetic aromatic compounds with the general formula C12H(10-x)Cl(-x) that were historically used in industrial paints, caulking material and adhesives, as their properties enhanced structural integrity, reduced flammability and boosted antifungal properties. Although the United States Environmental Protection Agency (USEPA) has banned the manufacture of PCBs since 1979, they have been found in at least 500 of the 1,598 National Priorities List (Superfund) sites identified by the USEPA. Prior to the US EPA's ban on PCB production, PCBs were commonly used as additives in paints and asphalt-based adhesives that were subsequently applied to a variety of structures. Government facilities constructed as early as 1930 utilized PCB-containing binders or PCB-containing paints, which are now leaching into the environment and posing ecological and worker health concerns. In 2006, a commercially available product known as AMSTAR Dechlorination Solution was tested at NASA's Kennedy Space Center for its ability to remove and degrade PCBs from structural materials. This evaluation was requested by the Environmental Security Technology Certification Program (ESTCP) evaluating the ability of NASA's Bimetallic Treatment System (BTS) to remove and degrade PCBs from structural materials. The results of the laboratory testing are to be used to determine if a side-by-side field-scale test comparing BTS to AMSTAR was warranted. A recommended sampling and analysis testing program was submitted to ESTCP that included triplicate screening of AMSTAR's PCB dechlorination capabilities on a variety of surfaces including glass, bare metal, and painted metal coupons. The test procedures, analytical techniques and results obtained are presented in this interim report to ESTCP.

Quinn, Jacqueline E.↗
DOE OSTI2021

CO and H 2 adsorption on Au-Ni bimetallic surfaces: a combined experimental and DFT theoretical study

Au-Ni bimetallic thin films were grown on refractory metal substrates. CO and H 2 adsorption on Au-Ni bimetallic surfaces have been studied by a combination of in situ polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS), temperature-programmed desorption (TPD), and density functional theory (DFT) calculations. It is found CO desorption peak shifts from 413 K on pure Ni surfaces to 293 K on the isolated Ni atoms formed by alloying with Au atoms. The sharp decrease of CO desorption temperature on Au-Ni surfaces with increasing Au coverage is caused by the change of the favored CO adsorption sites from bridge/hollow sites on pure Ni surfaces to Ni top sites on Au-Ni bimetallic surfaces. In situ PM-IRRAS shows two CO adsorption bands on Au sites at 2119 cm −1 and 2103 cm −1 on Au-Ni surfaces at 80 K, which are due to CO bound on under-coordinated Au atoms and electron negatively charged Au sites modified with nearby Ni atoms, respectively. Even with the Au-Ni surface temperature at as low as 100 K, CO adsorption induced Ni surface segregation has been observed by in situ PM-IRRAS. Furthermore, DFT calculation results discover the adsorption energy of CO on Ni top sites continues to decrease with increasing Au coverage due to the geometric ensemble effect and the lowered d-band center after Ni alloying with Au. H 2 desorption temperature decreases from 363 K on pure Ni thin films to 302 K with increasing Au coverage to 0.6 ML. A new H 2 peak appears at around 170 K on the Au-Ni surfaces with Au coverages between 0.6 ML and 0.9 ML. This new H 2 TPD peak is assigned to H 2 desorption from the totally isolated Ni sites. With Au coverage above 1.5 ML, there is no any H 2 desorption detected. Finally, the combined surface science studies and DFT calculations provide new insights into the surface structure-activity correlation of Ni-base bimetallic surface alloys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Bridge-Mediated Metal-to-Metal Electron and Hole Transfer in a Supermolecular Dinuclear Complex: A Computational Study Using Quantum Electron–Nuclear Dynamics

Bimetallic electron donor–acceptor complexes can facilitate electron and energy transfer with excellent structural control through synthetic design. In this work, we investigate the photochemical dynamics in a Ru–Cu bimetallic complex after photoexcitation of the Ru-centered charge transfer state. The physical underpinnings of the metal-to-metal directional charge transfer process are unraveled via analyses of the quantum electronic dynamics and electron–nuclear trajectories. Here, the effects of molecular vibrations in the photoexcited state on the charge transfer processes are also analyzed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Pd and octahedra do not get along: Square planar [PdS 4 ] units in non-centrosymmetric La 6 PdSi 2 S 14

Non-linear optical (NLO) materials require a balance of high second-harmonic generation (SHG) signal and laser damage threshold (LDT), as well as phase matchable behavior. Herein, we report a new member of the (RE) 6 (TM) x (Tt) 2 Q 14 family of compounds, La 6 PdSi 2 S 14 , which, unlike all other reported TM analogues crystallizing in hexagonal P6 3 space group, crystallizes in the non-centrosymmetric monoclinic P2 1 space group. The crystal structure contains chains of edge-sharing distorted square planar [PdS 4 ] units. The square-planar coordination of Pd in La 6 PdSi 2 S 14 exhibits remarkable NLO properties with high SHG (3.7 × AgGaS 2 ) and LDT (3 × AgGaS 2 ) values as well as phase matchability. This shows the promise of novel materials with distorted structural motifs for enhanced NLO properties. Further, upon formation of bimetallic chiral sulfides containing both Cu and Pd, Cu occupies the opposite faces of the octahedra forming [CuS 3 ] units while Pd can be stabilized in the center of PdS 6 octahedra in the hexagonal P6 3 crystal structure of La 6 Pd 0.5 CuSi 2 S 14 . This suggests that it is possible to form mixed metal systems which could further enhance NLO properties by incorporation of additional structural distortions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Ligand-Structure-Dependent Coherent Vibrational Wavepacket Dynamics in Pyrazolate-Bridged Pt(II) Dimers

Bimetallic transition metal complexes have gained increasing attention because of their versatile functions in solar energy conversion and photonics applications arising from inter-metal electronic coupling. In bimetallic platinum (Pt) complexes, electronic communication between the Pt-centered and ligand-centered moieties have been shown to be critical for defining their excited-state dynamic trajectories undergoing either localized ligand centered (LC)/metal-to-ligand-charge-transfer (MLCT) transitions or delocalized metal-metal-to-ligand-charge-transfer (MMLCT) transitions. The branching of the excited-state intersystem crossing (ISC) trajectories are modulated through structural factors that alter the relative energies of the different states. In this study, we investigated the correlation of the structural factors influencing the excited state trajectories. Using femtosecond broadband transient absorption (fs-BBTA) spectroscopy, ultrafast dynamics in the excited state of two select Pt(II) dimers have been mapped out using their coherent vibrational wavepacket signatures in corresponding transient absorption spectra. To examine how the ligand moieties of the Pt(II) dimers influence excited-state dynamics and the coherent vibrational wavepacket behavior, here we carried out comparative studies on two pyrazolate-bridged Pt(II) dimers of the general formula [Pt( t Bu 2 Pz)(N^C)] 2 ( t Bu 2 Pz = 3,5-di-tert-butylpyrazole); N^C = 7,8-benzoquinoline (bzq, 1) or 1-phenylisoquinoline (piq, 2)). We found that photoexcitation into the low energy absorption bands of 1 and 2 respectively induce the formation of 1 MMLCT states from which ultrafast ISC proceeds, resulting in stimulated emission quenching and decoherence of the vibrational wavepacket motions. The results obtained in this study suggest that both energetics and the structural rigidity of the aromatic cyclometalating ligands in 1 and 2 can significantly influence dynamics along the excited state trajectory characterized by dephasing of the coherent oscillations. The collective results provide direct evidence of how ligand structure alters electronic dynamics along excited state trajectories associated with ISC processes, providing insight into using ligand design to steer photochemical processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Direct Observation of Phase Change Accommodating Hydrogen Uptake in Bimetallic Nanoparticles

Hydrogen holds great promise as a cleaner alternative to fossil fuels, but its efficient and affordable storage remains a significant challenge. Bimetallic systems, such as Pd and Ni, present a promising option for storing hydrogen. In this study, using the combination of different cutting-edge X-ray and electron techniques, we observed the transformations of Pd–Ni nanoparticles, which initially consist of a NiO-rich shell surrounding a Pd-rich core but undergo a major transformation when they interact with hydrogen. During hydrogen exposure, the Pd core breaks into smaller pockets, dramatically increasing its surface area and enhancing the hydrogen storage capacity, especially in nanoparticles with lower Pd content. The findings provide a deep understanding of the morphological changes at the atomic level during hydrogen storage and contribute to designing cost-effective hydrogen storage using multimetallic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1980

Large-aperture high-resolution X-ray collimator for the Solar Maximum Mission

A description is presented of a flight-qualified large-aperture 12 x 12-arcsec angular resolution multigrid X-ray collimator developed for the Solar Maximum Mission (SMM) flat crystal spectrometer. This collimator, designed for the 1.4-22.4-A wavelength range, utilizes an optical bench/metering structure to align and support prealigned grid subassemblies. The optical bench is a lightweight, rigid, and stable aluminum honeycomb structure. The grids are of a compound and bimetallic design, having 63.5-micron square holes on an 88.9-micron spacing in 8-micron thick gold, which is in turn supported by a 76-micron thick Invar grid having 600-micron square holes on a 739-micron spacing. The small apertures in the gold provide the 12-arcsec collimation with the Invar grids providing wide angle off-axis blocking out to an approximately 35 arcmin view angle. The collimator has seven individual channels, four of a 5.1- x 10-cm area and three of a 1.3- x 10-cm area. Laboratory measurements gave an average angular resolution of 12.5 arcsec FWHM with 0.259 transmission for the large-area channels and 12.0 arcsec and 0.200 transmission for the small-area channels. A thermal filter composed of two layers of approximately 1000-A thick aluminum prevents solar heating of the front collimator grids by absorbing longer wavelength radiation while passing most of the X radiation in the band of interest.

Nobles, R. A.↗
NASA NTRS1994

Optimization for minimum sensitivity to uncertain parameters

A procedure to design a structure for minimum sensitivity to uncertainties in problem parameters is described. The approach is to minimize directly the sensitivity derivatives of the optimum design with respect to fixed design parameters using a nested optimization procedure. The procedure is demonstrated for the design of a bimetallic beam for minimum weight with insensitivity to uncertainties in structural properties. The beam is modeled with finite elements based on two dimensional beam analysis. A sequential quadratic programming procedure used as the optimizer supplies the Lagrange multipliers that are used to calculate the optimum sensitivity derivatives. The method was perceived to be successful from comparisons of the optimization results with parametric studies.

Pritchard, Jocelyn I.↗
DOE OSTI2023

Chemical and Structural Evolution of AgCu Catalysts in Electrochemical CO 2 Reduction

Silver–copper (AgCu) bimetallic catalysts hold great potential for electrochemical carbon dioxide reduction reaction (CO 2 RR), which is a promising way to realize the goal of carbon neutrality. Although a wide variety of AgCu catalysts have been developed so far, it is relatively less explored how these AgCu catalysts evolve during CO 2 RR. The absence of insights into their stability makes the dynamic catalytic sites elusive and hampers the design of AgCu catalysts in a rational manner. Here, in this study, we synthesized intermixed and phase-separated AgCu nanoparticles on carbon paper electrodes and investigated their evolution behavior in CO 2 RR. Our time-sequential electron microscopy and elemental mapping studies show that Cu possesses high mobility in AgCu under CO 2 RR conditions, which can leach out from the catalysts by migrating to the bimetallic catalyst surface, detaching from the catalysts, and agglomerating as new particles. Besides, Ag and Cu manifest a trend to phase-separate into Cu-rich and Ag-rich grains, regardless of the starting catalyst structure. The composition of the Cu-rich and Ag-rich grains diverges during the reaction and eventually approaches thermodynamic values, i.e., Ag 0.88 Cu 0.12 and Ag 0.05 Cu 0.95 . The separation between Ag and Cu has been observed in the bulk and on the surface of the catalysts, highlighting the importance of AgCu phase boundaries for CO 2 RR. In addition, an operando high-energy-resolution X-ray absorption spectroscopy study confirms the metallic state of Cu in AgCu as the catalytically active sites during CO 2 RR. Taken together, this work provides a comprehensive understanding of the chemical and structural evolution behavior of AgCu catalysts in CO 2 RR.

Chen, Peng-Cheng↗
DOE OSTI2024

Medium-Entropy Engineering of Magnetism in Layered Antiferromagnet Cu x Ni 2(1- x ) Cr x P 2 S 6

Antiferromagnetic van der Waals-type M 2 P 2 X 6 compounds provide a versatile material platform for studying 2D magnetism and relevant phenomena. Establishing ferromagnetism in 2D materials is technologically valuable. Though magnetism is generally tunable via a chemical way, it is challenging to induce ferromagnetism with isovalent chalcogen and bimetallic substitutions in M 2 P 2 X 6 . Here, we report co-substitution of Cu 1+ and Cr 3+ for Ni 2+ in Ni 2 P 2 S 6 , creating Cu x Ni 2(1-x) Cr x P 2 S 6 medium-entropy alloys spanning a full substitution range (x = 0 to 1). Such substitution strategy leads to a unique evolution in crystal structure and magnetic phases that are distinct from traditional isovalent bimetallic doping, with Cu and Cr co-substitution enhancing ferromagnetic correlations and generating a weak ferromagnetic phase in intermediate compositions. This aliovalent substitution strategy offers a universal approach for tuning layered magnetism in antiferromagnetic systems, which along with the potential for light-matter interaction and high-temperature ferroelectricity, can enable multifunctional device applications.

2D magnetism↗