Search NASA⌕ Search

SEARCH · Search NASA

Results for “black mass”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Periodic Gamma-Ray Modulation of the Blazar PG 1553+113 Confirmed by Fermi-LAT and Multiwavelength Observations

A 2.1 yr periodic oscillation of the gamma-ray flux from the blazar PG 1553+113 has previously been tentatively identified in ∼7 yr of data from the Fermi Large Area Telescope. After 15 yr of Fermi sky-survey observations, doubling the total time range, we report >7 cycle gamma-ray modulation with an estimated significance of 4σ against stochastic red noise. Independent determinations of oscillation period and phase in the earlier and the new data are in close agreement (chance probability <0.01). Pulse timing over the full light curve is also consistent with a coherent periodicity. Multiwavelength new data from Swift X-Ray Telescope, Burst Alert Telescope, and UVOT, and from KAIT, Catalina Sky Survey, All-Sky Automated Survey for Supernovae, and Owens Valley Radio Observatory ground-based observatories as well as archival Rossi X-Ray Timing Explorer satellite-All Sky Monitor data, published optical data of Tuorla, and optical historical Harvard plates data are included in our work. Optical and radio light curves show clear correlations with the gamma-ray modulation, possibly with a nonconstant time lag for the radio flux. We interpret the gamma-ray periodicity as possibly arising from a pulsational accretion flow in a sub-parsec binary supermassive black hole system of elevated mass ratio, with orbital modulation of the supplied material and energy in the jet. Other astrophysical scenarios introduced include instabilities, disk and jet precession, rotation or nutation, and perturbations by massive stars or intermediate-mass black holes in polar orbit.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Tripling the Census of Dwarf AGN Candidates Using DESI Early Data

Using early data from the Dark Energy Spectroscopic Instrument (DESI) survey, we search for active galactic nuclei (AGN) signatures in 410,757 line-emitting galaxies. By employing the BPT emission-line ratio diagnostic diagram, we identify AGNs in 75,928/296,261 (≈25.6%) high-mass ($\mathrm{log}({M}_{\star }/{M}_{\odot })\,\gt$ 9.5) and 2444/114,496 (≈2.1%) dwarf ($\mathrm{log}({M}_{\star }/{M}_{\odot })\,\leqslant$ 9.5) galaxies. Of these AGN candidates, 4181 sources exhibit a broad Hα component, allowing us to estimate their BH masses via virial techniques. This study more than triples the census of dwarf AGNs and doubles the number of intermediate-mass black hole (M BH ≤ 10 6 M ⊙ ) candidates, spanning a broad discovery space in stellar mass (7 $\lt \mathrm{log}({M}_{\star }/{M}_{\odot })\,\lt$ 12) and redshift (0.001 < z < 0.45). The observed AGN fraction in dwarf galaxies (≈2.1%) is nearly four times higher than prior estimates, primarily due to DESI’s smaller fiber size, which enables the detection of lower-luminosity dwarf AGN candidates. We also extend the M BH –M⋆ scaling relation down to ${\rm{log}}({M}_{\star }/{M}_{\odot })\,\approx$ 8.5 and $\mathrm{log}({M}_{\mathrm{BH}}/{M}_{\odot })\,\approx$ 4.4, with our results aligning well with previous low-redshift studies. The large statistical sample of dwarf AGN candidates from current and future DESI releases will be invaluable for enhancing our understanding of galaxy evolution at the low-mass end of the galaxy mass function.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Sensitive searches for wormholes

A sensitive test for whether a black hole is a wormhole, using astronomical observations, would be to look for perturbations in the orbit of a pulsar around the black hole, caused by a perturbing object on the other side of the wormhole. By observing a pulsar in an orbit like that of S2 around the supermassive black hole at Sgr A* at the center of our Galaxy, the attainable mass limit on the perturber would be approximately 10 4 times better than derived from current observations of S2. For a nominal stellar-mass black hole–pulsar binary, observing for 1 year could set a mass limit on a perturber more than 6 orders of magnitude better than for a pulsar orbiting Sgr A*. Observations of a star in a stellar-mass binary containing a black hole could set limits similar to the case of a pulsar orbiting Sgr A*.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Structural decomposition of merger-free galaxies hosting luminous AGNs

ABSTRACT Active galactic nucleus (AGN) growth in disc-dominated, merger-free galaxies is poorly understood, largely due to the difficulty in disentangling the AGN emission from that of the host galaxy. By carefully separating this emission, we examine the differences between AGNs in galaxies hosting a (possibly) merger-grown, classical bulge, and AGNs in secularly grown, truly bulgeless disc galaxies. We use galfit to obtain robust, accurate morphologies of 100 disc-dominated galaxies imaged with the Hubble Space Telescope. Adopting an inclusive definition of classical bulges, we detect a classical bulge component in $53.3 \pm 0.5$ per cent of the galaxies. These bulges were not visible in Sloan Digital Sky Survey photometry, however these galaxies are still unambiguously disc-dominated, with an average bulge-to-total luminosity ratio of $0.1 \pm 0.1$. We find some correlation between bulge mass and black hole mass for disc-dominated galaxies, though this correlation is significantly weaker in comparison to the relation for bulge-dominated or elliptical galaxies. Furthermore, a significant fraction ($\gtrsim 90$ per cent) of our black holes are overly massive when compared to the relationship for elliptical galaxies. We find a weak correlation between total stellar mass and black hole mass for the disc-dominated galaxies, hinting that the stochasticity of black hole–galaxy co-evolution may be higher in disc-dominated than bulge-dominated systems.

Fahey, Matthew J.↗
DOE OSTI2024

Electrolytic recovery of metals from lithium battery cathodes in moisture-tolerant molten hydroxide salt

Lithium-ion battery recycling offers an opportunity to develop innovative technologies to close the loop on the battery materials cycle and increase the resilience of the battery supply chain. Here, in this study, we demonstrate a two-step pyroelectrochemical method for producing mixed-metals from lithium-ion cathodes in a molten hydroxide salt. Mixed metal oxides in the form of insoluble lithium-ion cathode materials of LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) and spent lithium-ion battery materials (black mass) were electrochemically reduced to a soluble form and dissolved into a molten hydroxide salt bath. Electrochemical characterization of the process salt indicated accumulation of dissolved transition metals in the salt. A separate cathode was used to produce alloys of Ni, Mn, and Co electrochemically from the dissolved lithium-ion cathode materials. Characterization by scanning electron microscopy fitted with an energy dispersive X-ray spectrometer showed transition metals present in the cathode materials were recovered at the separate cathode. This approach represents a scalable, low temperature pyroelectrochemical process that can potentially reduce the cost and close the loop of battery cathode recycling.

25 ENERGY STORAGE↗
DOE OSTI2023

Optimized purification methods for metallic contaminant removal from directly recycled Li-ion battery cathodes

Metallic contaminants pose a significant challenge to the viability of directly recycling Li-ion batteries. To date, few strategies exist to selectively remove metallic impurities from mixtures of shredded end-of-life material (black mass; BM) without concurrently damaging the structure and electrochemical performance of the target active material. We herein present tailored methods to selectively ionize two major contaminants—Al and Cu—while retaining a representative cathode (LiNi 0.33 Mn 0.33 Co 0.33 O 2 ; NMC-111) intact. This BM purification process is conducted at moderate temperatures in a KOH-based solution matrix. We rationally evaluate approaches to increase both the kinetic corrosion rate and the thermodynamic solubility of Al 0 and Cu 0 , and evaluate the impact of these treatment conditions on the structure, chemistry, and electrochemical performance of NMC. Specifically, we explore the impacts of chloride-based salts, a strong chelating agent, elevated temperature, and sonication on the rate and extent of contaminant corrosion, while concurrently evaluating the effects on NMC. The reported BM purification process is then demonstrated on samples of “simulated BM” containing a practically relevant 1 wt% concentration of Al or Cu. Increasing the kinetic energy of the purifying solution matrix through elevated temperature and sonication accelerates the corrosion of metallic Al and Cu, such that ∼100% corrosion of 75 μm Al and Cu particles is achieved within 2.5 hr. Further, we determine that effective mass transport of ionized species critically impacts the efficacy of Cu corrosion, and that saturated Cl – hinders rather than accelerates Cu corrosion by increasing solution viscosity and introducing competitive pathways for Cu surface passivation. The purification conditions do not induce bulk structural damage to NMC, and electrochemical capacity is maintained in half-cell format. Testing in full cells suggests that a limited quantity of residual surface species are present after treatment, which initially disrupt electrochemical behavior at the graphite anode but are subsequently consumed. Process demonstration on simulated BM suggests that contaminated samples—which prior to treatment show catastrophic electrochemical performance—can be recovered to pristine electrochemical capacity. The reported BM purification method offers a compelling and commercially viable solution to address contamination, particularly in the “fine” fraction of BM where contaminant sizes are on the same order of magnitude as NMC and where traditional separation approaches are unfeasible. Thus, this optimized BM purification technique offers a pathway towards viable direct recycling of BM feedstocks that would otherwise be unusable.

25 ENERGY STORAGE↗
DOE OSTI2023

Sequential Recovery of Critical Metals from Leached Liquor of Processed Spent Lithium-Ion Batteries

The processing and extraction of critical metals from black mass is important to battery recycling. Separation and recovery of critical metals (Co, Ni, Li, and Mn) from other metal impurities must yield purified metal salts, while avoiding substantial losses of critical metals. Solvent extraction in batch experiments were conducted using mixed metal sulphates obtained from the leach liquor obtained from spent and shredded lithium-ion batteries. Selective extraction of Mn 2+ , Fe 3+ , Al 3+ and Cu 2+ from simulated and real leached mixed metals solution was carried out using di-2-ethylhexylphophoric acid (D2EPHA) and Cyanex-272 at varying pH. Further experiments with the preferred extractant (D2EPHA) were performed under different conditions: changing the concentration of extractant, organic to aqueous ratio, and varying the diluents. At optimum conditions (40% v/v D2EPHA in kerosene, pH 2.5, O:A = 1:1, 25 °C, and 20 min), 85% Mn 2+ , 98% Al 3+ , 100% Fe 3+ , and 43% Cu 2+ were extracted with losses of only trace amounts (<5.0%) of Co 2+ , Ni 2+ , and Li + . The order of extraction efficiency for the diluents was found to be kerosene > Exxal-10 >>> dichloromethane (CH 2 Cl 2 ) > toluene. Four stages of stripping of metals loaded on D2EPHA were performed as co-extracted metal impurities were selectively stripped, and a purified MnSO 4 solution was produced. Spent extractant was regenerated after Fe 3+ and Al 3+ were completely stripped using 1.0 M oxalic acid (C 2 H 2 O 4 ).

25 ENERGY STORAGE↗
DOE OSTI2025

Unveiling the Role of Critical Impurities in Spent LiFePO 4 Cathodes for Scalable Direct Regeneration

Direct regeneration offers a promising alternative to recycling End-of-Life (EoL) batteries by restoring metal elements and preserving the material structure, yet scaling these technologies to handle practical cathode black mass (CBM) with impurities remains challenging. Here, this study investigates the evolution of impurities, including aluminum (Al), polyvinylidene difluoride (PVDF) binder, and residual carbon (C), during direct recycling of spent LiFePO 4 (LFP) cathodes and their impact on electrochemical performance. Using various ex situ and in situ analyses, it is shown that the formation of lithium fluoride (LiF) during the traditional direct recycling process hinders lithium diffusion and deteriorates the reversible capacity. To address this major challenge, the combination of pH-controlled hydrothermal purification and the two-step sintering process is proposed effectively to regenerate spent LFP cathodes, eliminating the negative effect of Al and fluorine (F) impurities while mitigating any potential impacts of carbon residuals. The regenerated LFP from spent CBM achieves superior performance, retaining 152.5 mAh g −1 at 0.1 C and 133 mAh g −1 at 1 C with 98.7% capacity retention after 200 cycles. This approach is further validated using three distinct waste feedstocks from battery modules, enhancing impurity management and scalability in direct recycling. These findings present a sustainable and economically viable solution for large-scale LFP regeneration.

25 ENERGY STORAGE↗
DOE OSTI2025

Waveform modelling for the Laser Interferometer Space Antenna

LISA, the Laser Interferometer Space Antenna, will usher in a new era in gravitational-wave astronomy. As the first anticipated space-based gravitational-wave detector, it will expand our view to the millihertz gravitational-wave sky, where a spectacular variety of interesting new sources abound: from millions of ultra-compact binaries in our Galaxy, to mergers of massive black holes at cosmological distances; from the early inspirals of stellar-mass black holes that will ultimately venture into the ground-based detectors’ view to the death spiral of compact objects into massive black holes, and many sources in between. Central to realising LISA’s discovery potential are waveform models, the theoretical and phenomenological predictions of the pattern of gravitational waves that these sources emit. This White Paper is presented on behalf of the Waveform Working Group for the LISA Consortium. It provides a review of the current state of waveform models for LISA sources, and describes the significant challenges that must yet be overcome.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Lunar accelerometer network gravitational observatory (LANGO)

With ground-based interferometers detecting hundreds of gravitational-wave (GW) events, GW astronomy has continued to blossom. U.S. and European scientists are developing plans to construct third-generation ground-based interferometers. ESA has proceeded through the mission formulation phase of space-based interferometer in a lower-frequency band, 10 –4 –0.1 Hz. Despite all these exciting developments, there is still a missing frequency band, 0.1–10 Hz. This mid-frequency band is rich with interesting astrophysical events. Coalescence and merger of intermediate-mass black holes (IMBHs) will occur in this frequency band. Coalescing stellar-mass BHs will pass through this frequency band days before they reach the frequency band of LIGO and Virgo. Detection of such signals would enable a mid-frequency detector to issue an advance notice to the high-frequency GW detectors, as well as to optical, x-ray and γ-ray telescopes. We propose Lunar Accelerometer Network Gravitational Observatory (LANGO) to detect GWs in this frequency band. In the first phase (LANGO 1), we propose to deploy four ambient-temperature (250 K) accelerometers in the tetrahedral or in a square configuration on the hemisphere facing the Earth. After successful operation at 250 K, LANGO would be upgraded to a cryogenic (4 K) version with over two orders of magnitude increased sensitivity (LANGO 2), with coherent rejection of seismic noise implemented. LANGO is a full-tensor detector, capable of determining the source direction and wave polarization. Each test mass (TM) is suspended as a pendulum with resonance frequency ∼ 0.01 Hz, thus is only weakly coupled to the lunar surface horizontally. LANGO is designed to detect the relative motion of globally separated, nearly free, TMs by using the Moon as a large quiet platform. LANGO 1 and 2 accelerometers aim at sensitivities ⩽ 10 –11 m s –2 Hz –1/2 and ⩽ 10 –13 m s –2 Hz –1/2 in the horizontal axes over the frequency band of 1 mHz–10 Hz, which yield GW sensitivities 1.1 x 10 -21 Hz -1/2 and 3.8 x 10 -24 Hz -1/2 at 1 Hz, respectively. The LANGO accelerometers will be 10 3 –10 5 times more sensitive than Apollo seismometers. With such sensitivity, LANGO will also make great contribution to the advancement of lunar geophysics.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Search for continuous gravitational wave signals from luminous dark photon superradiance clouds with LVK O3 observations

Superradiance clouds of kinetically mixed dark photons around spinning black holes can produce observable multimessenger electromagnetic and gravitational wave signals. The cloud generates electric fields of up to a teravolt-per-meter, which leads to a cascade production of charged particles, yielding a turbulent quasiequilibrium plasma around the black hole, and resulting in electromagnetic fluxes ranging from supernova to pulsar-like luminosities. For stellar mass black holes, such systems resemble millisecond pulsars and are expected to emit pulsating radio waves and continuous gravitational waves (CWs) within the LIGO-Virgo-KAGRA (LVK) sensitivity band. We select 44 sources with approximately coincident frequencies or positive frequency drifts from existing pulsar catalogs as potential candidates of long-lasting superradiance clouds around old Galactic black holes. For a subset of 34 sources that are well measured and have not been previously targeted, we perform the first search for CW emission in LVK data from the third observing run. We find no evidence of a CW signal and place 95% confidence level upper limits on the emitted strain amplitude. We interpret these results, together with limits from previous searches, in terms of the underlying dark photon theory by performing an analysis of the expected signals from superradiance clouds from Galactic black holes. Finally, we find that, even for moderately spinning black holes, the absence of an observed CW signal disfavors a discrete set of dark photon masses between about 10 −13 and 10 −12 eV/c 2 and kinetic mixing couplings in the range of 10 −9 –10 −7 , subject to assumptions about the properties of the black hole population and the cloud’s electromagnetic emission.

astronomical black holes↗
DOE OSTI2020

Is GW170817 a Multimessenger Neutron Star-Primordial Black Hole Merger?

We investigate the possibility of the gravitational-wave event GW170817 being a light, solar-mass black hole (BH) - neutron star (NS) merger. We explore two exotic scenarios involving primordial black holes (PBH) that could produce such an event, taking into account available observational information on NGC 4993. First, we entertain the possibility of dynamical NS-PBH binary formation where a solar-mass PBH and a NS form a binary through gravitational interaction. We find that while dynamical NS-PBH formation could account for the GW170817 event, the rate is highly dependent on unknown density contrast factors and could potentially be affected by galaxy mergers. We also find that PBH-PBH binaries would likely have a larger merger rate, assuming the density contrast boost factor of an order similar to the NS-PBH case. These exotic merger formations could provide new channels to account for the volumetric rate of compact-object mergers reported by LIGO/Virgo. Secondly, we consider the case where one of the NS's in a binary NS system is imploded by a microscopic PBH. We find that the predicted rate for NS implosion into a BH is very small, at least for the specific environment of NGC 4993. We point out that similar existing (e.g. GW190425 and GW190814) and future observations will shed additional light on these scenarios.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

The Role of Strong Magnetic Fields in Stabilizing Highly Luminous Thin Disks

Abstract We present and analyze a set of three-dimensional, global, general relativistic radiation magnetohydrodynamic simulations of thin, radiation-pressure-dominated accretion disks surrounding a nonrotating, stellar-mass black hole. The simulations are initialized using the Shakura–Sunyaev model with a mass accretion rate of M ̇ = 3 L Edd / c 2 (corresponding to L = 0.17 L Edd ). Our previous work demonstrated that such disks are thermally unstable when accretion is driven by an α -viscosity. In the present work, we test the hypothesis that strong magnetic fields can both drive accretion through magnetorotational instability and restore stability to such disks. We test four initial magnetic field configurations: (1) a zero-net-flux case with a single, radially extended set of magnetic field loops (dipole), (2) a zero-net-flux case with two radially extended sets of magnetic field loops of opposite polarity stacked vertically (quadrupole), (3) a zero-net-flux case with multiple radially concentric rings of alternating polarity (multiloop), and (4) a net-flux, vertical magnetic field configuration (vertical). In all cases, the fields are initially weak, with a gas-to-magnetic pressure ratio ≳100. Based on the results of these simulations, we find that the dipole and multiloop configurations remain thermally unstable like their α -viscosity counterpart, in our case collapsing vertically on the local thermal timescale and never fully recovering. The vertical case, on the other hand, stabilizes and remains so for the duration of our tests (many thermal timescales). The quadrupole case is intermediate, showing signs of both stability and instability. The key stabilizing factor is the ability of specific field configurations to build up and sustain strong, P mag ≳ 0.5 P tot , toroidal fields near the midplane of the disk. We discuss the reasons why certain configurations are able to do this effectively and others are not. We then compare our stable simulations to the standard Shakura–Sunyaev disk.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

The Fate of Nucleated Black Holes in de Sitter Quantum Gravity

The Euclidean Nariai geometry has long been proposed as the instanton describing the nucleation of maximal-mass black holes in de Sitter space. We place this interpretation on firmer footing by showing that, once an observer is included, the gravitational path integral produces the imaginary phase required for a transition rate. As a warmup, we revisit the Hawking-Moss instanton and, as a byproduct, find that scalar fields can enhance black-hole nucleation, suggesting a quantum-gravity bound on scalar potentials with de Sitter solutions. We then study the subsequent semiclassical evolution of the nucleated black hole. We show that the previously claimed "anti-evaporation" channel is unphysical, arising from a quantum state with singular horizons. In a smooth state, the black hole instead undergoes standard thermal Hawking evaporation. We verify explicit agreement with the no-boundary state and argue that this evaporation is not subject to large quantum-gravity corrections. The nucleated black hole thus evaporates completely back to the maximally-entropic empty de Sitter vacuum, making the full process a Boltzmann fluctuation.

FOS: Physical sciences↗
DOE OSTI2024

Characterizing gravitational wave detector networks: from A # to cosmic explorer

Gravitational-wave observations by the laser interferometer gravitational-wave observatory (LIGO) and Virgo have provided us a new tool to explore the Universe on all scales from nuclear physics to the cosmos and have the massive potential to further impact fundamental physics, astrophysics, and cosmology for decades to come. In this paper we have studied the science capabilities of a network of LIGO detectors when they reach their best possible sensitivity, called A # , given the infrastructure in which they exist and a new generation of observatories that are factor of 10 to 100 times more sensitive (depending on the frequency), in particular a pair of L-shaped cosmic explorer (CE) observatories (one 40 km and one 20 km arm length) in the US and the triangular Einstein telescope with 10 km arms in Europe. We use a set of science metrics derived from the top priorities of several funding agencies to characterize the science capabilities of different networks. The presence of one or two A # observatories in a network containing two or one next generation observatories, respectively, will provide good localization capabilities for facilitating multimessenger astronomy (MMA) and precision measurement of the Hubble parameter. Two CE observatories are indispensable for achieving precise localization of binary neutron star events, facilitating detection of electromagnetic counterparts and transforming MMA. Their combined operation is even more important in the detection and localization of high-redshift sources, such as binary neutron stars, beyond the star-formation peak, and primordial black hole mergers, which may occur roughly 100 million years after the Big Bang. The addition of the Einstein Telescope to a network of two CE observatories is critical for accomplishing all the identified science metrics including the nuclear equation of state, cosmological parameters, the growth of black holes through cosmic history, but also make new discoveries such as the presence of dark matter within or around neutron stars and black holes, continuous gravitational waves from rotating neutron stars, transient signals from supernovae, and the production of stellar-mass black holes in the early Universe. For most metrics the triple network of next generation terrestrial observatories are a factor 100 better than what can be accomplished by a network of three A # observatories.

Einstein telescope↗
DOE OSTI2022

First Sagittarius A* Event Horizon Telescope Results. VI. Testing the Black Hole Metric

Astrophysical black holes are expected to be described by the Kerr metric. This is the only stationary, vacuum, axisymmetric metric, without electromagnetic charge, that satisfies Einstein’s equations and does not have pathologies outside of the event horizon. We present new constraints on potential deviations from the Kerr prediction based on 2017 EHT observations of Sagittarius A* (Sgr A*). We calibrate the relationship between the geometrically defined black hole shadow and the observed size of the ring-like images using a library that includes both Kerr and non-Kerr simulations. We use the exquisite prior constraints on the mass-to-distance ratio for Sgr A* to show that the observed image size is within ∼10% of the Kerr predictions. We use these bounds to constrain metrics that are parametrically different from Kerr, as well as the charges of several known spacetimes. To consider alternatives to the presence of an event horizon, we explore the possibility that Sgr A* is a compact object with a surface that either absorbs and thermally reemits incident radiation or partially reflects it. Using the observed image size and the broadband spectrum of Sgr A*, we conclude that a thermal surface can be ruled out and a fully reflective one is unlikely. We compare our results to the broader landscape of gravitational tests. Together with the bounds found for stellar-mass black holes and the M87 black hole, our observations provide further support that the external spacetimes of all black holes are described by the Kerr metric, independent of their mass.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Outflow from Outer-arm Starburst in a Grazing Collision between Galaxies

Gemini NIFS K-band spectra and Atacama Large Millimeter/submillimeter Array {sup 12}CO J=1→0, HCO{sup +}, and 100 GHz continuum observations are used to study a bright starburst clump on an outer arm of the interacting galaxy NGC 2207. This clump emits 23% of the total 24 μm flux of the galaxy pair and has an optically opaque dust cone extending out of its 170 pc core. The measured CO accounts for the dark cone extinction if almost all the gas and dust there are in front of the star clusters. An associated approaching CO outflow has v {sub z} ~ 16 km s{sup -1}, an estimated molecular mass 8 × 10{sup 6} M {sub ⊙}, and rises to heights ~0.9 kpc. A receding CO outflow on the far side with v {sub z} ~ 28 km s{sup -1} is less extensive. The observed star formation in the core over 10 Myr can supply the dark cone kinetic energy of roughly 2 × 10{sup 52} erg via supernovae and stellar winds. Other signs of intense activity are a variable radio continuum, suggesting an embedded supernova or other outburst; X-ray emission possibly from an X-ray binary or intermediate-mass black hole, depending on the extinction; and Brγ and He i lines with 82 km s{sup -1} line widths and fluxes consistent with excitation by embedded O-type stars. According to previous models, the retrograde encounter suffered by NGC 2207 caused the loss of angular momentum. This compressed its outer disk. We suggest that the resulting inward crashing stream hit a massive H i clump on the preexisting spiral arm and triggered the observed starburst.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Revisiting constraints on asymmetric dark matter from collapse in white dwarf stars

The runaway collapse phase of a small dark matter cluster inside a white dwarf star encompasses a reversible stage, where heat can be transferred back and forth between nuclear and dark matter. Induced nuclear burning phases are stable and early carbon depletion undermines previous claims of type Ia supernova ignition. Instead, mini black holes are formed at the center of the star that either evaporate or accrete stellar material until a macroscopic sub-Chandrasekhar-mass black hole is formed. In the latter case, a 0.1 to 1 second lasting electromagnetic transient signal can be detected upon ejection of the white dwarf’s potential magnetic field. Binary systems that transmute to black holes and subsequently merge emit gravitational waves. Advanced LIGO should detect one such sub-Chandrasekhar binary black hole inspiral per year, while future Einstein telescope-like facilities will detect thousands per year. The effective spin parameter distribution is peaked at 0.2 and permits future studies to disentangle from primordial sub-Chandrasekhar black holes. Such signatures are compatible with current direct detection constraints, as well as with neutron star constraints in the case of bosonic dark matter, even though they remain in conflict with the fermionic case for part of the parameter space.

79 ASTRONOMY AND ASTROPHYSICS↗