Search NASA⌕ Search

SEARCH · Search NASA

Results for “bulk modulus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Investigation of the Mechanical Properties of GdBa{sub 2}Cu{sub 3}O{sub 7−δ} Added with Nanosized Ferrites ZnFe{sub 2}O{sub 4} and CoFe{sub 2}O{sub 4} Using Ultrasonic Measurement

Recently, there is much interest in studying the effect of nanosized ferrites addition on high- T{sub c} superconductors. However, little information is available on the mechanical properties. We have investigated the effect of (CoFe{sub 2}O{sub 4}){sub x} and (ZnFe{sub 2}O{sub 4}){sub x} nanosized ferrites with 0.01 ≤ x ≤ 0.40 on the mechanical properties of the high- T{sub c} superconducting compound GdBa{sub 2}Cu{sub 3}O{sub 7−δ} (Gd-123) prepared by the conventional solid-state reaction technique. Elastic parameters including shear modulus (G), bulk modulus (B), and Young’s modulus (E) of all samples were inspected using ultrasonic measurements and compared with Vickers microhardness results. Furthermore, the porosity of the samples was investigated and correlated to Young’s modulus, which was corrected to zero porosity using different models. The corrected values were correlated with Vickers microhardness. Moreover, the Debye temperature (θ{sub D}) and the electron-phonon coupling factor (λ) were also determined as a function of x. We observed that the different nanoparticles addition has influenced the Gd-123 compound differently. For (ZnFe{sub 2}O{sub 4}){sub x} added samples, the mechanical properties and Debye temperature improved up to x = 0.06, then deteriorated with further addition. However, (CoFe{sub 2}O{sub 4}){sub x} addition improved the mechanical properties for all samples with x up to 0.40. We found that the proportionality constant between the corrected values of E and H{sub v} and G and H{sub v} are strongly dependent on the porosity corrections and the kind of superconducting material. This indicates that the widely used formula E = 81.96 H{sub v} may not be valid for all types of superconducting materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Geomechanical and flow implications with continued bioconversion of coal to methane: Experiments and modeling

Microbial conversion of coal to methane is a promising technology during transition of coal-based energy from conventional coal mining to natural gas recovery from coal. Significant research advances have been made towards engineering ideal microbial communities and nutrients for bio-stimulation of coal. However, actual field applications require geomechanical and flow behavior characterization of coal during the bioconversion process as well as gas production over the life of the created “biogenic gas reservoirs”. This work presents the results of an experimental investigation to estimate gas/methane production using bioconversion of coal and analyses of variations in bulk modulus, strain and permeability. Bulk modulus of coal demonstrated time-dependent behavior with continued bioconversion of solid coal. The phenomenon was modeled using mass balancing in a closed environment and the logistic equation based biogenic gas production with time. The modeled gas production and changes in modulus of coal showed excellent agreement with the corresponding experimental results. Next, numerical simulation of biogenic conversion of coal in a constant stress in-situ condition, replicating the Huff ‘n Puff method under field conditions, was carried out. The results showed that bioconversion can lead to decrease in effective stress, increase in permeability and decrease in the modulus of coal with time. Repeated recharge of coal with nutrients and recovering the produced gas, that is, sequential cycles of Huff n’ Puff, showed further increase in permeability and decrease in coal strength, potentially leading to coal failure in-situ, further increasing the permeability, thus enhancing the prospect of field application of the technology.

01 COAL, LIGNITE, AND PEAT↗

Electronic, elastic, and optical properties of monolayer BC{sub 2}N

The structural stability, electronic structure, elasticity, and optical properties of four types of monolayer BC{sub 2}N have been investigated from first principles using calculation based on density functional theory. The results show that the structural stability of BC{sub 2}N increases with the number of C–C and B–N bonds. By calculating the two-dimensional Young's modulus, shear modulus, Poisson's ratio, and shear anisotropic factors in different directions, four structures present various anisotropies and the most stable structure is almost isotropic. For C-type BC{sub 2}N, the values of two-dimensional Young's modulus, shear modulus, and bulk modulus (309, 128, 195 GPa m{sup −1}), are smaller than those of graphene (343, 151, 208) but bigger than those of h-BN (286, 185, 116). Furthermore, the dielectric function, refractive index, reflectivity, absorption coefficient, and energy loss spectrum are also calculated to investigate the mechanism underpinning the optical transitions in BC{sub 2}N, revealing monolayer BC{sub 2}N as a candidate window material. - Graphical abstract: Schematic diagram of BC{sub 2}N under the biaxial tensile strain. Changes in the valence-band top and the conduction-band bottom of BC{sub 2}N with increasing strain.

36 MATERIALS SCIENCE↗

Thermal equation of state of lower-mantle ferropericlase across the spin crossover

The thermal equation of state of ferropericlase [(Mg{sub 0.75}Fe{sub 0.25})O] has been investigated by synchrotron X-ray diffraction up to 140 GPa and 2000 K in a laser-heated diamond anvil cell. Based on results at high pressure-temperature conditions, the derived phase diagram shows that the spin crossover widens at elevated temperatures. Along the lower-mantle geotherm, the spin crossover occurs between 1700 km and 2700 km depth. Compared to the high-spin state, thermoelastic modeling of the data shows a {approx}1.2% increase in density, a factor of two increase in thermal expansion coefficient over a range of 1000 km, and a maximum decrease of 37% and 13% in bulk modulus and bulk sound velocity, respectively, at {approx}2180 km depth across the spin crossover. These anomalous behaviors in the thermoelastic properties of ferropericlase across the spin crossover must be taken into account in order to understand the seismic signatures and geodynamics of the lower mantle.

58 GEOSCIENCES↗

Equations of State and Anisotropy of Fe-Ni-Si Alloys

We present powder X–ray diffraction data on body centered cubic (bcc)– and hexagonal close packed (hcp)–structured Fe 0.91 Ni 0.09 and Fe 0.8 Ni 0.1 Si 0.1 at 300 K up to 167 and 175 GPa, respectively. The alloys were loaded with tungsten powder as a pressure calibrant and helium as a pressure transmitting medium into diamond anvil cells, and their equations of state and axial ratios were measured with high statistical quality. These equations of state are combined with thermal parameters from previous reports to improve the extrapolation of the density, adiabatic bulk modulus, and bulk sound speed to the pressures and temperatures of Earth's inner core. We propagate uncertainties and place constraints on the composition of Earth's inner core by combining these results with available data on light–element alloys of iron and seismic observations. For example, the addition of 4.3 to 5.3 wt% silicon to Fe 0.95 Ni 0.05 alone can explain geophysical observations of the inner core boundary, as can up to 7.5 wt% sulfur with negligible amounts of silicon and oxygen. Our findings favor an inner core with less than ~2 wt% oxygen and less than 1 wt% carbon, although uncertainties in electronic and anharmonic contributions to the equations of state may shift these values. The compositional space widens toward the center of the Earth, considering inner core seismic gradients. Here, we demonstrate that hcp–Fe 0.91 Ni 0.09 and hcp–Fe 0.8 Ni 0.1 Si 0.1 have measurably greater c/a axial ratios than those of hcp–Fe over the measured pressure range. Here, we further investigate the relationship between the axial ratios, their pressure derivatives, and elastic anisotropy of hcp–structured materials.

36 MATERIALS SCIENCE↗

Elastic Properties and Internal Friction of Two Magnesium Alloys at Elevated Temperatures

The elastic properties and internal friction of two magnesium alloys were studied from 25 C to 450 C using Resonant Ultrasound Spectroscopy (RUS). The Young's moduli decrease with increasing temperature. At 200 C, a change in the temperature dependence of the elastic constants is observed. The internal friction increases significantly with increasing temperature above 200 C. The observed changes in the temperature dependence of the elastic constants and the internal friction are the result of anelastic relaxation by grain boundary sliding at elevated temperatures. Elastic properties govern the behavior of a materials subjected to stress over a region of strain where the material behaves elastically. The elastic properties, including the Young's modulus (E), shear modulus (G), bulk modulus (B), and Poisson's ratio (?), are of significant interest to many design and engineering applications. The choice of the most appropriate material for a particular application at elevated temperatures therefore requires knowledge of its elastic properties as a function of temperature. In addition, mechanical vibration can cause significant damage in the automotive, aerospace, and architectural industries and thus, the ability of a material to dissipate elastic strain energy in materials, known as damping or internal friction, is also important property. Internal friction can be the result of a wide range of physical mechanisms, and depends on the material, temperature, and frequency of the loading. When utilized effectively in engineering applications, the damping capacity of a material can remove undesirable noise and vibration as heat to the surroundings. The elastic properties of materials can be determined by static or dynamic methods. Resonant Ultrasound Spectroscopy (RUS), used in this study, is a unique and sophisticated non-destructive dynamic technique for determining the complete elastic tensor of a solid by measuring the resonant spectrum of mechanical resonance for a sample of known geometry, dimensions, and mass. In addition, RUS allows determination of internal friction, or damping, at different frequencies and temperatures. Polycrystalline pure magnesium (Mg) exhibits excellent high damping properties. However, the poor mechanical properties limit the applications of pure Mg. Although alloying can improve the mechanical properties of Mg, the damping properties are reduced with additions of alloying elements. Therefore, it becomes necessary to study and develop Mg-alloys with simultaneous high damping capacity and improved mechanical properties. Moreover, studies involving the high temperature dynamic elastic properties of Mg alloys are limited. In this study, the elastic properties and internal friction of two magnesium alloys were studied at elevated temperatures using RUS. The effect of alloy composition and grain size was investigated. The wrought magnesium alloys AZ31 and ZK60 were employed. Table 1 gives the nominal chemical compositions of these two alloys. The ZK60 alloy is a commercial extruded plate with a T5 temper, i.e. solution-treated at 535 C for two hours, quenched in hot water, and aged at 185 C for 24 hours. The AZ31 alloy is a commercial rolled plate with a H24 temper, i.e. strain hardened and partially annealed.

36 MATERIALS SCIENCE↗

Electronic Structure and Mechanical Properties of Solvated Montmorillonite Clay Using Large-Scale DFT Method

Montmorillonite clay (MMT) has been widely used in engineering and environmental applications as a landfill barrier and toxic waste repository due to its unique property as an expandable clay mineral that can absorb water easily. This absorption process rendered MMT to be highly exothermic due to electrostatic interactions among molecules and hydrogen bonds between surface atoms. A detailed study of a large supercell model of structural clay enables us to predict long-term nuclear waste storage. Herein, a large solvent MMT model with 4071 atoms is studied using ab initio density functional theory. The DFT calculation and analysis clarify the important issues, such as bond strength, solvation effect, elasticity, and seismic wave velocities. These results are compared to our previous study on crystalline MMT (dry). The solvated MMT has reduced shear modulus (G), bulk modulus (K), and Young’s modulus (E). We observe that the conduction band (CB) in the density of states (DOS) of solvated MMT model has a single, conspicuous peak at –8.5 eV. Moreover, the atom-resolved partial density of states (PDOS) summarizes the roles played by each atom in the DOS. These findings illuminate numerous potential sophisticated applications of MMT clay.

36 MATERIALS SCIENCE↗

Elastic constants at low temperatures - Recent measurements on technological materials at NBS

Solid-state low-temperature elastic properties have been experimentally studied at the NBS Cryogenic Division for four years. Most studies were between room temperature and liquid-helium temperature; some were only to liquid-nitrogen temperature. Two dynamic (high-frequency) experimental methods were used, pulse-echo and resonance, resulting in adiabatic elastic constants. The present paper reviews these studies for 47 technological materials - metals, alloys, and composites. The elastic constants primarily discussed are Young's modulus, the shear modulus, the bulk modulus (reciprocal compressibility), and Poisson's ratio. A summary table is presented to show which base metals tend to exhibit regular, irregular, or anomalous behavior in their elastic constant/temperature curves.

Ledbetter, H. M.↗

Inverse problem in anisotropic poroelasticity: Drained constants from undrained ultrasound measurements

Poroelastic analysis has traditionally focused on the relationship between dry or drained constants which are assumed known and the saturated or undrained constants which are assumed unknown. However, there are many applications in this field of study for which the main measurements can only be made on the saturated/undrained system, and then it is uncertain what the eects of the uids were on the system, since the drained constants remain a mystery. The work presented here shows how to deduce drained constants from undrained constants for anisotropic systems having symmetries ranging from isotropic to orthotropic. Laboratory ultrasound data are then inverted for the drained constants in three granular packings: one of glass beads, and two others for distinct types of more or less angular sand grain packings. Experiments were performed under uniaxial stress, which resulted in hexagonal (transversely isotropic) symmetry of the poroelastic response. One important conclusion from the general analysis is that the drained constants are uniquely related to the undrained constants, assuming that porosity, grain bulk modulus, and pore uid bulk modulus are already known. Since the resulting system of equations for all the drained constants is linear, measurement error in undrained constants also propagates linearly into the computed drained constants.

54 ENVIRONMENTAL SCIENCES↗

Nanocrystalline tungsten carbide: As incompressible as diamond

We investigate the compressibility of nanocrystalline tungsten carbide (nano-WC) using synchrotron x-ray diffraction. Nano-WC displays a bulk modulus (452 GPa) comparable to that of diamond; it is 10%-15% larger than previously reported values for bulk WC. This finding is consistent with a generalized model of nanocrystal with a compressed surface layer. The linear bulk moduli of nano-WC along a- and c-axes were determined to be 407 and 546 GPa, respectively. First-principles density functional theory (DFT) calculations confirm the experimental observations of an anisotropic linear compressibility and a lower bulk modulus for microsized WC.

43 PARTICLE ACCELERATORS↗

Mechanical properties of bulk and nanoscale TiO[subscript 2] phases

The mechanical properties of bulk and nanoscale TiO{sub 2} phases are examined with a view to assess the available bulk modulus and hardness data, and to understand the size-dependent behaviors. The bulk modulus values of thermodynamically stable bulk TiO{sub 2} phases show a general correlation with Ti-O coordination number. As with the cotunnite-structured (OII) phase, it is likely that the seven-coordinated OI and eight-coordinated fluorite forms of TiO{sub 2} are ultrahard substances. Of the nanoscale phases investigated thus far, nanocrystalline anatase displays the strongest size dependence of bulk modulus values, with possible stiffening behavior effected by incipient grain boundary amorphization under pressure. Nanocrystalline rutile and baddeleyite phases do not show appreciable size dependence in their compression behaviors.

58 GEOSCIENCES↗

The alloying element dependence of the local lattice deformation and the elastic properties of Ni{sub 3}Al: A molecular dynamics simulation

Molecular dynamics (MD) together with the modified analytical embedded atom method (MAEAM) is employed to study the alloying elements (Re, Ru, Co, and Ta) dependence of the elastic properties of L1{sub 2}-Ni{sub 3}Al. The investigations indicate that the calculated elastic properties of Ni{sub 3}Al are in reasonable agreement with the previous results. The substituting formation energies of the alloying elements in Ni{sub 3}Al are calculated to determine the site preference. It is found out that Re, Ru, and Ta atoms prefer to occupy the Al sites, and the Co atom prefers to occupy the Ni site. Based on Re, Ru, and Ta substituting the 1st, 2nd, 3rd, and 4th nearest-neighbor atoms, we ascertain that the substituting manners of these alloying elements have a decisive effect on the bulk modulus and the local crystal lattice of Ni{sub 3}Al. Moreover, for Re, the bonding interaction plays a predominant role in the improvement in the bulk modulus of Ni{sub 3}Al, whereas the size effect of Ru and Ta on the improvement in the bulk modulus is more obvious. Finally, the potential reasons of which the alloying elements enhance the bulk modulus are discussed in details.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pressure-induced transformations of multiferroic relaxor PbFe 0.5 Nb 0.5 O 3

The effects of hydrostatic pressure at ambient temperature on the structural and dielectric properties of PbFe 0.5 Nb 0.5 O 3 (PFN) were investigated using second harmonic generation (SHG) and powder x-ray diffraction measurements to 31 GPa. The results demonstrate that PFN undergoes a pressure-induced structural transition from the R3$m$ ferroelectric to the $R$$\bar{3}m$ paraelectric phase. SHG measurements showed a continuous decrease in the signal with pressure and complete disappearance at 7.1 GPa. Effective nonlinear optical coefficients were determined from the SHG data, and their pressure behavior was used to infer the nature of the transition. The loss of the SHG signal is accompanied by drastic changes in line widths of Bragg reflections, but no discontinuous change in volume was observed. The pressure-volume data were fit to various equations of state, and a bulk modulus $K_0$ = 136 (±2) GPa, bulk modulus pressure derivative $K_0$ ' = 4.0 (±0.2), and initial volume $V_0$ = 64.5 (±0.1) Å 3 were obtained.

36 MATERIALS SCIENCE↗

Thermal equation of state of silicon carbide

A large volume press coupled with in-situ energy-dispersive synchrotron X-ray was used to probe the change of silicon carbide (SiC) under high pressure and temperature (P-T) up to 8.1 GPa and 1100 K. The obtained pressure–volume–temperature (P-V-T) data were fitted to a modified high-T Birch-Murnaghan equation of state, yielding values of a series of thermo-elastic parameters, such as, the ambient bulk modulus K To = 237(2) GPa, temperature derivative of bulk modulus at constant pressure (∂K/∂T)P = -0.037(4) GPa K -1 , volumetric thermal expansivity α(0, T)=a+bT with a = 5.77(1)×10 -6 K -1 and b = 1.36(2)×10 -8 K -2 , and pressure derivative of thermal expansion at constant temperature (∂α/∂P) T =6.53±0.64×10 -7 K -1 GPa -1 . Furthermore, we found the temperature derivative of bulk modulus at constant volume, (∂K T /∂T) V , equal to -0.028(4) GPa K -1 by using a thermal pressure approach. In addition, the elastic properties of SiC were determined by density functional theory through the calculation of Helmholtz free energy. Lastly, the computed results generally agree well with the experimental values.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermal equation of state for zoisite: Implications for the transportation of water into the upper mantle and the high-velocity anomaly in the Farallon plate

Seismic tomography studies have revealed a high-velocity anomaly at depths between 100 km and 300 km in the Farallon plate. However, the reasons for the high-velocity anomaly continue to be debated. An analysis of the mineral proportions of eclogites exhumed from the Farallon plate shows that the average amount of zoisite in eclogite is ∼16.0 vol%. Therefore, the presence of zoisite eclogite needs to be considered to explain the high-velocity anomaly of the Farallon plate. However, the thermal equation of state and stability of zoisite have not been fully investigated under high pressure−temperature (P-T) conditions. We investigated the high-pressure and high-temperature behavior of natural zoisite utilizing synchrotron single crystal-X-ray diffraction (XRD). The results indicate that zoisite is metastable up to 24.8 GPa and 700 K. We obtained the ambient unit-cell volume V0 = 901.26(3) Å3 by synchrotron single crystal-XRD measurement. We also fitted the pressure-volume-temperature data to a high-temperature Birch-Murnaghan equation of state and obtained the zero-pressure bulk modulus K0 = 134.7(8) GPa, the temperature derivative of the bulk modulus (∂K/∂T)P = −0.011(4) GPa/K, and the thermal expansion coefficients α0V = 1.9(7) × 10−5 K−1 and α1V = 3(2) × 10−8 K−2 when the pressure derivative of bulk modulus (K′0) is fixed at 4. By incorporating the results from previous studies, we calculated the density and bulk sound velocity profiles of zoisite eclogite along the Farallon plate geotherm. Finally, we infer that zoisite could carry water to depths of ∼300 km within cold subducting slabs and that the bulk sound velocity of typical zoisite eclogite with ∼61.0 vol% omphacite, ∼23.0 vol% garnet, and ∼16.0 vol% zoisite could cause the high-velocity anomalies at depths of 100−300 km in the Farallon plate.

Geology↗

Hydrostatic compaction of Microtherm ® HT

Two samples of jacketed Microtherm ® HT were hydrostatically pressurized to maximum pressures of 29,000 psi to evaluate both pressure-volume response and change in bulk modulus as a function of density. During testing, each of the two samples exhibited large irreversible compactive volumetric strains with only small increases in pressure; however at volumetric strains of approximately 50%, the Microtherm ® HT stiffened noticeably at ever increasing rates. At the maximum pressure of 29,000 psi, the volumetric strains for both samples were approximately 70%. Bulk modulus, as determined from hydrostatic unload/reload loops, increased by more than two-orders of magnitude (from about 4500 psi to over 500,000 psi) from an initial material density of ~0.3 g/cc to a final density of ~1.1 g/cc. An empirical fit to the density vs. bulk modulus data is K = 492769 Ρ {sup 4.6548 , where K is the bulk modulus in psi, and Ρ is the material density in g/cm 3 . The porosity decreased from 88% to ~20% indicating that much higher pressures would be required to compact the material fully.

99 GENERAL AND MISCELLANEOUS↗

Elastic constant versus temperature behavior of three hardened maraging steels

Elastic constants of three maraging steels were determined by measuring ultrasonic velocities. Annealed steels show slightly lower bulk moduli and considerably lower shear moduli than hardened steels. All the elastic constants (Young's modulus, shear modulus, bulk modulus and Poisson's ratio) show regular temperature behavior between 76 and 400 K. Young's modulus and the shear modulus increase with increasing yield strength, but the bulk modulus and Poisson's ratio are relatively unchanged. Elastic anisotropy is quite small.

Ledbetter, H. M.↗

Compressibility of Nanocrystalline Forsterite

We established an equation of state for nanocrystalline forsterite using multi-anvil press and diamond anvil cell. Comparative high-pressure and high-temperature experiments have been performed up to 9.6 GPa and 1,300 C. We found that nanocrystalline forsterite is more compressible than macro-powder forsterite. The bulk modulus of nanocrystalline forsterite is equal to 123.3 ({+-}3.4) GPa whereas the bulk modulus of macro-powder forsterite is equal to 129.6 ({+-}3.2) GPa. This difference is attributed to a weakening of the elastic properties of grain boundary and triple junction and their significant contribution in nanocrystalline sample compare to the bulk counterpart. The bulk modulus at zero pressure of forsterite grain boundary was determined to be 83.5 GPa.

58 GEOSCIENCES↗