SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Polymer-coated nanoparticles in synovial fluid and hyaluronic acid solutions diffuse faster than expected based on bulk viscosity.
Abstract We have studied the spin polarization of $$\Lambda $$ Λ hyperons in heavy ion collisions at center-of-mass energies $$\sqrt{s_\textrm{NN}}= 200$$ s NN = 200 GeV and $$\sqrt{s_\textrm{NN}}= 5.02$$ s NN = 5.02 TeV carried out at RHIC and LHC colliders. We have calculated the mean spin vector at local thermodynamic equilibrium, including all known first-order terms in the gradients of the thermo-hydrodynamic fields, assuming that the hadronization hypersurface has a uniform temperature. We have also included the feed-down contributions to the polarization of $$\Lambda $$ Λ stemming from the decays of polarized $$\Sigma ^*$$ Σ ∗ and $$\Sigma ^0$$ Σ 0 hyperons. The obtained results are in good agreement with the data. In general, the component of the spin vector along the global angular momentum, orthogonal to the reaction plane, shows strong sensitivity to the initial longitudinal flow velocity. Furthermore, the longitudinal component of the spin vector turns out to be very sensitive to the bulk viscosity of the plasma at the highest LHC energy. Therefore, the azimuthal dependence of spin polarization can effectively constrain the initial hydrodynamic conditions and the transport coefficients of the quark gluon plasma.
This Letter targets the assessment of the well-known Tenti S6 model for predicting the Rayleigh–Brillouin scattering (RBS) spectra of select gas–phase hydrocarbon fuels (CH 4 , C 2 H 2 , C 2 H 4 , C 3 H 8 , and C 4 H 10 ) over a temperature range of 300 to 700 K. The Tenti S6 model is evaluated by comparing filtered Rayleigh scattering (FRS) measurements to synthetic FRS signals generated from the combination of the Tenti S6 output and an accurate iodine absorption filter model. Here, the experimental and synthetic FRS results agree very well (<3% difference) over the full temperature range for CH 4 , C 2 H 2 , and C 2 H 4 , indicating accurate calculation of the RBS spectra. For C 3 H 8 and C 4 H 10 , there are some large differences between the experimental and synthetic FRS results which cannot be resolved through tuning of bulk viscosity, internal heat capacity, or inclusion of vibrational degrees of freedom, suggesting the need for detailed measurements of the Rayleigh–Brillouin spectra.
Here we introduce fluctuating hydrodynamics approaches on surfaces for capturing the drift-diffusion dynamics of particles and microstructures immersed within curved fluid interfaces of spherical shape. We take into account the interfacial hydrodynamic coupling, traction coupling with the surrounding bulk fluid, and thermal fluctuations. For fluid-structure interactions, we introduce Immersed Boundary Methods (IBM) and related Stochastic Eulerian-Lagrangian Methods (SELM) for curved surfaces. We use these approaches to investigate the statistics of surface fluctuating hydrodynamics and microstructures. For velocity autocorrelations, we find characteristic power-law scalings $τ^{-1}, τ^{-2}$, and plateaus can emerge. This depends on the physical regime associated with the geometry, surface viscosity, and bulk viscosity. This differs from the characteristic $τ^{-3/2}$ scaling for bulk three dimensional fluids. We develop theory explaining these observed power-laws associated with time-scales for dissipation within the fluid interface and coupling to the surrounding fluid. We then use our introduced methods to investigate a few example systems and roles of hydrodynamic coupling and thermal fluctuations including for the kinetics of passive particles and active microswimmers in curved fluid interfaces.
Driven by the urgent demand for efficient cooling in microelectronics and advanced thermal management systems, difluoromethane (R32/CH 2 F 2 ) has emerged as a promising candidate owing to its favorable thermophysical properties, including high heat transfer efficiency and low viscosity. While bulk properties such as density, viscosity, and thermal conductivity have been widely studied, interfacial properties, including surface tension and interfacial thickness, remain comparatively underexplored, despite their importance in phase-transition dynamics. Here, we perform molecular dynamics (MD) simulations from 180 to 300 K using an optimized transferable force field for fluoropropenes with enhanced electrostatics to assess both bulk and interfacial behavior of R32. Simulations reproduced density within ±2.1%, viscosity within 3.05%, and thermal conductivity within 7.41% of NIST reference data. Heat capacities (C p and C v ) were predicted within 5%. For interfacial properties, surface tension trends were reproduced within 13.58% deviation, and the vapor–liquid coexistence curve closely matched reference data, yielding a critical temperature of 345.7 K (1.6% deviation) and a critical density of 0.397 g/cm 3 (6.4% deviation). Importantly, the vapor–liquid interface exhibited pronounced temperature-dependent broadening across the 180–290 K range. This behavior correlates with increasing molecular kinetic energy, reduction in intermolecular cohesive interactions, and a progressive loss of preferential dipole alignment, which collectively enhance thermal fluctuation amplitudes at elevated temperatures. These validated results provide predictive molecular-level insights, particularly for interfacial properties that remain less characterized. By reducing property prediction errors in key parameters such as critical temperature, this work provides reliable inputs for heat-exchanger and system models. Such correlations can support optimized component sizing, improved performance, and reduced refrigerant charge. Beyond R32, the methodology offers a transferable framework for blended and next-generation low-GWP refrigerants, contributing to sustainable thermal management aligned with the 2027 EU F-Gas regulation and 2030 Kigali Amendment.
Organic aerosol (OA) is a complex matrix of various constituents—fresh (primary organic aerosols—POA) and aged via oxidation (secondary organic aerosols—SOA), generated from biogenic, anthropogenic, and biomass burning sources. The viscosity of OA can be critical in influencing new particle formation, reactive uptake processes that impact evaporation-growth kinetics, and the lifetime of particles in the atmosphere. We report this work utilizes a well-defined relationship between volatility and viscosity for pure compounds, which we incorporated within the Weather Research and Forecasting Model coupled to chemistry (WRF-Chem) to simulate the phase state and viscosity of bulk OA during the dry-to-wet transition season (September–October) in the Amazon rainforest during 2014. Our simulations indicate spatial and temporal heterogeneity in aerosol phase state often not captured by global-scale models. We show the strong role of water associated with organic aerosol ($w_s$) as the dominant factor that can be used to quantitatively estimate OA viscosity. Analysis of WRF-Chem simulations across the entire atmospheric column indicates a strong inverse log-linear relationship between $w_s$ and OA viscosity with a correlation coefficient approaching 1, in the background and biomass burning-influenced conditions. At high altitudes where relative humidity (RH) and temperatures are low, our simulations indicate that OA exists in a semisolid-/solid-like phase state, consistent with previous studies. OA hygroscopicity is strongly correlated (ca. –0.8) with OA viscosity at RH ca. 30–50%, but this RH range is found mostly at low OA concentrations and the middle troposphere (ca. 6–10 km altitudes) in our simulated domain. OA hygroscopicity is uncorrelated with viscosity at higher-RH (near surface) and lower-RH (upper troposphere) regimes. At the urban site near surface, where day–night differences in RH are significant, RH is found to drive the phase state. At the background forested site near surface, where day–night RH differences are small, biomass burning-influenced OA is semisolid and a significant OA associated with background conditions is liquid-like. Simulations indicate a long tail of OA viscosity frequency distributions extending in the semisolid/solid regimes over background biogenic-influenced conditions due to the role of low-volatility OA components such as monoterpene oxidation products.
Recent advances in large-scale additive manufacturing (AM) with polymer-based composites have enabled efficient production of high-performance materials. Cellulose nanomaterials (CNMs) have emerged as bio-based feedstocks due to their exceptional strength and sustainability. However, challenges such as hornification and poor dispersion in polymer matrices still limit large-scale CNM–polymer composite manufacturing, requiring novel strategies. Here, this review outlines an approach starting with atomic-level simulations to link molecular composition to key parameters like bulk density, viscosity, and modulus. These simulations provide data for finite element analysis (FEA), which informs large-scale experiments and reduces the need for extensive trials. The strategy explores how atomic interactions impact the morphology, adhesion, and mechanical properties of CNM-based composites in AM processes. The review also discusses current developments in AM, along with predictions of mechanical and thermal properties for structural applications, packaging, flexible electronics, and hydrogel scaffolds. By integrating experimental findings with molecular dynamics (MD) simulations and finite element modeling (FEM), valuable insights for material design, process optimization, and performance enhancement in CNM-based AM are provided to address ongoing challenges.
Real driving emission (RDE) test conducted in sub-zero temperature conditions has been acting as a severe emission regulation over the existing test methods for diesel engines. In order to cope with this tightened regulation, many studies have been conducted to interpret the factors causing the deteriorated diesel engine combustion in cold operation conditions. The deteriorated fuel injection performance has been regarded as one of the key contributing factors but the governing mechanisms are not thoroughly understood so far. This study aims to provide a comprehensive understanding of the effects of fuel temperature including sub-zero conditions on fuel injection performance by measuring the transient needle motion and injection velocity of a diesel injector using synchrotron X-ray imaging techniques. Here, the factors causing the deteriorated injector performance and their contributions are discussed thoroughly based on the results. The results showed that the injection duration was shortened as the fuel temperature decreased as a result of decreased needle opening speed and increased needle closing speed. The increase of fuel viscosity and bulk modulus was discussed as the main factors associated with these results. The total injection mass was reduced by lowering the fuel temperature not only by the shortened injection duration but also by the decreased injection velocity. These factors exerted near equivalent contribution to the reduced injection mass at low fuel temperatures.
Fluoride salts are prospective materials for applications in some next-generation nuclear reactors and their thermophysical properties at various conditions are of interest. Experimental measurement of the properties of these salts is often difficult and, in some cases, unfeasible due to challenges from high temperatures, impurity control, and corrosivity. Therefore, accurate theoretical methods are needed for fluoride salt property prediction. In this work, we used moment tensor potentials (MTP) to approximate the potential energy surface of eutectic FLiBe (66.6% LiF – 33.3% BeF2) predicted by the ab initio (DFT-D3) method. Here, we then used the developed potential and molecular dynamics to obtain several thermophysical properties of FLiBe, including radial distribution functions, density, self-diffusion coefficients, thermal expansion, specific heat capacity, bulk modulus, viscosity, and thermal conductivity. Our results show that the MTP potential approximates the potential energy surface accurately and the overall approach yields very good agreement with experimental values. The converged fitting can be obtained with less than 600 configurations generated from DFT calculations, which data can be generated in just 1200 core hours on today's typical processors. The MTP potential is faster than many machine learning potentials and about one order of magnitude slower than widely used empirical molten salt potentials such as Tosi/Fumi.
A recent thermal Hall experiment triggered renewed interest in the problem of $\textit{ν}$ = 5/2 quantum Hall effect, which motivated novel interpretations based on the formation of mesoscopic puddles made of Pfaffian and anti-Pfaffian topological orders. Here, we study an interface between the Pfaffian and anti-Pfaffian states, which may play crucial roles in thermal transport, by means of state-of-the-art, density-matrix renormalization group simulations. We demonstrate that an intrinsic electric dipole moment emerges at the interface, similar to the “$\textit{p–n}$” junction sandwiched between $\textit{N}$-type and $\textit{P}$-type semiconductor. Importantly, in this work we elucidate the topological origin of this dipole moment, whose formation is to counterbalance the mismatch of guiding-center Hall viscosity of bulk Pfaffian and anti-Pfaffian states. In addition, these results imply that the formation of a dipole moment could be helpful to stabilize the puddles made of Pfaffian and anti-Pfaffian states in experimental conditions.
Final project report for: DOE Award no.~DE-SC0022201
Background: The near-equilibrium properties of a QCD plasma can be encoded into transport coefficients such as bulk and shear viscosity. In QCD, the ratio of these transport coefficients to entropy density, ζ/$\textit{s}$ and η/$\textit{s}$, depends nontrivially on the plasma's temperature. This is unlike in conformal systems where they take constant values such as η/$\textit{s}$ = 1/(4π). Purpose: In this work, we show that in a (0 + 1)D boost-invariant fluid with no transverse expansion, a temperature-dependent ζ/$\textit{s(T)}$ or η/$\textit{s(T)}$ can be described by an equivalent effective viscosity $\langleζ/s\rangle_{\text{eff}}$ or $\langleη/s\rangle_{\text{eff}}$. This effective viscosity combines the actual temperature-dependent ζ/$\textit{s(T)}$ or η/$\textit{s(T)}$ with the temperature profile of the fluid. Further, we extend the concept of effective viscosity in systems with transverse expansion and discuss how effective viscosities can be used to identify families of ζ/$\textit{s(T)}$ and η /$\textit{s(T)}$ that lead to similar hydrodynamic evolution. Methods: The Navier-Stokes relativistic hydrodynamic equations are used to provide a first definition of effective viscosity, in (0 + 1)D and (1 + 1)D. In the (0 + 1)D case, the analysis is extended to Israel-Stewart-type second-order hydrodynamics to clarify the effect of higher-order hydrodynamics corrections on the effective viscosity. Results: In a boost-invariant fluid with no transverse expansion [(0 + 1)D], the effective viscosity is expressed as a simple integral of ζ/$\textit{s(T)}$ or η/$\textit{s(T)}$ over temperature, with a weight determined by the speed of sound of the fluid. The result is general for any equation of state with a moderate temperature dependence of the speed of sound, including the QCD equation of state. This definition of effective viscosity can be used to identify infinite families of ζ/$\textit{s(T)}$ or η/$\textit{s(T)}$ that produce essentially indistinguishable temperature profiles. In a boost-invariant cylindrical system [(1 + 1)D], a similar definition of effective viscosity is obtained in terms of characteristic trajectories in time and transverse direction. This leads to an infinite number of constraints on an infinite functional space for ζ/$\textit{s(T)}$ and η/$\textit{s(T)}$. Realistic examples are presented by using a finite number of constraints on a finite functional space. Conclusions: The definition of effective viscosity in a (0 + 1)D system clarifies how infinite families of ζ/$\textit{s(T)}$ and η/$\textit{s(T)}$ can result in nearly identical hydrodynamic temperature profiles. By extending the study to a boost-invariant cylindrical [(1 + 1)D] fluid, we identify an approximate but more general definition of effective viscosity that highlights the potential and limits of the concept of effective viscosity in fluids with limited symmetries.
Abstract We compare predictions of 3+1D quasiparticle anisotropic hydrodynamics (aHydroQP) for a large set of bulk observables with experimental data collected in 5.02 TeV Pb–Pb collisions. We make predictions for identified hadron spectra, identified hadron average transverse momentum, charged particle multiplicity as a function of pseudorapidity, the kaon-to-pion ( $$K/\pi $$ K / π ) and proton-to-pion ( $$p/\pi $$ p / π ) ratios, identified particle and charged particle elliptic flow, and HBT radii. We compare to data collected by the ALICE collaboration in 5.02 TeV Pb–Pb collisions. We find that, based on available data, these bulk observables are well described by aHydroQP with an assumed initial central temperature of $$T_0=630$$ T 0 = 630 MeV at $$\tau _0 = 0.25$$ τ 0 = 0.25 fm/c and a constant specific shear viscosity of $$\eta /s=0.159$$ η / s = 0.159 , which corresponds to a peak specific bulk viscosity of $$\zeta /s = 0.048$$ ζ / s = 0.048 . In particular, we find that the momentum dependence of the kaon-to-pion ( $$K/\pi $$ K / π ) and proton-to-pion ( $$p/\pi $$ p / π ) ratios reported recently by the ALICE collaboration are extremely well described by aHydroQP in the 0–5% centrality class.
This study presents a systematic investigation of the transverse-momentum differential radial flow fluctuations observable 𝑣 0 (𝑝 𝑇 ) in relativistic heavy-ion collisions at top Relativistic Heavy Ion Collider ($\sqrt{s_{NN}}$ = 200 GeV) and Large Hadron Collider ($\sqrt{s_{NN}}$ = 2.76 and 5.02 TeV) energies. Using a multistage hydrodynamic model, this study assesses the sensitivity of 𝑣 0 (𝑝 𝑇 ) to a wide range of physical effects, including bulk and shear viscosities, off-equilibrium corrections at particlization, the presence of a hadronic afterburner, and the nucleon size in the initial conditions. By employing complementary rescaling strategies, this study demonstrates how different physical effects leave distinct imprints on the shape of 𝑣 0 (𝑝 𝑇 ). A combined double-rescaling of 𝑣 0 (𝑝 𝑇 )/𝑣 0 versus 𝑝 𝑇 /⟨𝑝 𝑇 ⟩ reveals a universality across a wide range of energies and model assumptions in the low-𝑝 𝑇 regime, a robust signature of collective behavior. This allows us to disentangle the universal dynamics of the bulk medium from model-specific features that emerge at higher 𝑝 𝑇 . These results establish 𝑣 0 (𝑝 𝑇 ) as a powerful and complementary observable for constraining quark-gluon plasma transport properties and initial-state granularity, offering a unique probe of the created QCD medium.
Due to gravity, solids in slurries will settle if density differences between the solids and liquid are positive (i.e., particle has a negative buoyant force) unless rheological properties and flow conditions are adequate to overcome the gravitational effects. The rate of settling depends on the force balance of the particle, which includes the surface forces associated with fluid rheology. Given the same fluid and solid properties, particles that are larger and denser tend to settle faster. When pumping slurry into a vessel at concentrations precluding hindered settling with insufficient mixing, particle and density distributions can result in preferential settling, creating stratification in the solids concentration within the vessel. For vessels with transfer line inlets located in the lower portion of the tank, the stratified solids concentration may be detrimental to the transfer system performance. Elevated concentrations of solids in the slurry entrained at the inlet to the transfer line can result in the effective viscosity or slurry bulk density exceeding the design limits of the pump. These conditions could result in plugging of the transfer line or onset of cavitation of the pumps because of excessive pressure drop. These conditions can be exacerbated with periodic inlet conditions existing at the transfer line inlet. Periodic conditions can result when vessel mixing is intermittent such as with pulsed jet mixers (PJM). The transfer line inlet conditions are impacted by the periodic nature of the PJM operations with respect to suspension of solids and their transport to the inlet of the transfer line. A scaling approach is presented, and corresponding test requirements are developed for assessing the prevention of plugging the pipeline. Line plugging mechanisms are addressed that do not include plugging due to steady-state high-density slurry entering the transfer line and reducing the net positive suction head available (NPSHA) at the pump inlet to below that required for pump operation. Items considered include the transition to reduced relative flow velocities, such that the critical pipe velocity for solids deposition, Ucd, is not maintained, and segregation of heavy solids during the transport. The recommended requirements to prevent plugging include: • Limits for viscosity and density for entrained slurry to prevent the pressure drop in the pipeline from exceeding pump capacity. • Limits for viscosity and density for entrained slurry to prevent the net positive suction head available (NPSHA) from falling below the net positive suction head required (NPSHR) for operating the pump. • Transfer line velocity and flow rate requirements to maintain solids in suspension, while avoiding line plugging that results from deposition of solids within the transfer line. This paper describes the development of the scaling and testing requirements to verify that proposed approaches for transfer and pump out are appropriately developed
Owing to their extremely low shear viscosity and fragility, bulk metallic glasses (BMGs) are envisioned as new net-shaping material replacing conventionally used crystalline metals for various applications. The first part of this review describes the general technique and kinetics of thermoplastic forming. The second part elaborates on the thermal processing capability of metallic glasses from atomic- to meter-scale. The micro-/nano-structure obtained after various quenching rates followed by temperature, time and heating rate dependent thermoplastic forming is described in the third section. The deformation behavior and flow kinetics of BMGs in terms of composition, mold features, and applied conditions are elaborated in the fourth section. The variation of volume and enthalpy at the supercooled liquid region, strength retention of metallic glasses compared to other conventional metals and alloys, and kinetics of liquid fragility are given in the fifth section. Finite element modeling and molecular dynamics simulations of high-temperature deformation in BMGs are presented in the sixth part. Finally, thermally-formed BMGs used for different applications, including energy, biomedical and micro-optics, are presented in the final part. Altogether, this review provides an overview of shaping capabilities and modifications in the macro-scale properties and short-to-medium range order of BMGs upon thermoplastic forming.
Based on a 14-moment closure for nonresistive (general-) relativistic viscous plasmas, here we describe a new numerical scheme that is able to handle all first-order dissipative effects (heat conduction, bulk and shear viscosities), as well the anisotropies induced by the presence of magnetic fields. The latter is parametrized in terms of a thermal gyrofrequency or, equivalently, a thermal Larmor radius and allows to correctly capture the thermal Hall effect. By solving an extended Israel-Stewart-like system for the dissipative quantities that enforces algebraic constraints via stiff-relaxation, we are able to cast all first-order dissipative terms in flux-divergence form. This allows us to apply traditional high-resolution shock capturing methods to the equations, making the system suitable for the numerical study of highly turbulent flows. We present several numerical tests to assess the robustness of our numerical scheme in flat spacetime. The 14-moment closure can seamlessly interpolate between the highly collisional limit found in neutron star mergers, and the highly anisotropic limit of relativistic Braginskii magnetohydrodynamics appropriate for weakly collisional plasmas in black-hole accretion problems. We believe that this new formulation and numerical scheme will be useful for a broad class of relativistic magnetized flows.
The suspension balance model (SBM) for viscous Stokes flow has been well studied for the case of identical, monodisperse spherical particles in a channel, however, more work remains to be done to explore the bidisperse and polydisperse SBM. Here, we present a simple extension of the SBM that allows for modeling of suspensions of particles of bidisperse size. The comparison with avaiable experiments and direct simulations is found to be good. Additionally, we present a range of simulations to justify the assumptions made in the polydisperse suspension balance model for non-Brownian, neutrally buoyant particles that vary in size with a bidisperse distribution. The aim is to study the effects of moderate size variation on the rheology of the suspension and the distribution of the particles across the flow, especially in the near-wall regions. It is shown that, at the size ratios considered, bidispersity in the particle size does not significantly affect rheological parameters including the particle volume fraction and relative viscosity in the bulk of a Couette flow. The particle phase stresses are distributed between small and large particles in proportion to the relative volume fractions of each species. In bidisperse suspensions, the large particles in the wall layer develop a spatial structure and form chains in the streamwise direction.