Search NASA⌕ Search

SEARCH · Search NASA

Results for “catechols”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Studies of a Ring-Cleaving Dioxygenase Illuminate the Role of Cholesterol Metabolism in the Pathogenesis of Mycobacterium tuberculosis

Mycobacterium tuberculosis, the etiological agent of TB, possesses a cholesterol catabolic pathway implicated in pathogenesis. This pathway includes an iron-dependent extradiol dioxygenase, HsaC, that cleaves catechols. Immunocompromised mice infected with a DhsaC mutant of M. tuberculosis H37Rv survived 50% longer than mice infected with the wild-type strain. In guinea pigs, the mutant disseminated more slowly to the spleen, persisted less successfully in the lung, and caused little pathology. These data establish that, while cholesterol metabolism by M. tuberculosis appears to be most important during the chronic stage of infection, it begins much earlier and may contribute to the pathogen’s dissemination within the host. Purified HsaC efficiently cleaved the catecholic cholesterol metabolite, DHSA (3,4-dihydroxy-9,10- seconandrost-1,3,5(10)-triene-9,17-dione; kcat/Km = 14.460.5 mM -1 s -1 ), and was inactivated by a halogenated substrate analogue (partition coefficient,50). Remarkably, cholesterol caused loss of viability in the DhsaC mutant, consistent with catechol toxicity. Structures of HsaC:DHSA binary complexes at 2.1 A revealed two catechol-binding modes: bidentate binding to the active site iron, as has been reported in similar enzymes, and, unexpectedly, monodentate binding. The position of the bicyclo-alkanone moiety of DHSA was very similar in the two binding modes, suggesting that this interaction is a determinant in the initial substrate-binding event. These data provide insights into the binding of catechols by extradiol dioxygenases and facilitate inhibitor design.

59 BASIC BIOLOGICAL SCIENCES↗

Mussel-Inspired Hydrogel Composite with Multi-Stimuli Responsive Behavior

A mussel-inspired adhesive hydrogel with pH, temperature, and near-infrared (NIR) light–responsive behavior is designed here. The hydrogel system is formulated by combining chitosan modified with catechol motifs, thermo-responsive poly(N-isopropylacrylamide) terminated with catechols, and light-absorbing polypyrrole nanoparticles (PpyNPs). The effects of catechol concentration, molar ratio of Fe 3+ to catechol units, pH, and the incorporation of the PpyNPs on the mechanical property of the formed hydrogel are investigated. The responsive behaviors of the resulting hydrogel composite to pH, temperature, and NIR light are also demonstrated. The obtained hydrogel also shows promising adhesive property to glass and steel substrates. It is anticipated that the fabricated adhesive hydrogel with multi-responsive behavior, especially NIR light response, can potentially be useful in a wide range of biomedical applications, such as remotely controlled release systems and removable sealant materials.

42 ENGINEERING↗

Bioconversion of Homogeneous Linear C-Lignin to Polyhydroxyalkanoates

Here, the bioconversion of homogeneous linear catechyl lignin (C-lignin) to polyhydroxyalkanoates (PHA) was examined for the first time in this study. C-lignins from vanilla, euphorbia, and candlenut seed coats (denoted as C1, C2, and C3, respectively) varied in their molecular structures, which showed different molecular weight distributions, etherification degrees, and contents of hydroxyl groups. A notable amount of nonetherified catechol units existed within C1 and C2 lignins, and these catechol units were consumed during fermentation. These results suggested that the nonetherified catechol structure was readily converted by Pseudomonas putida KT2440. Since the weight-average molecular weight of C2 raw lignin was 26.7% lower than that of C1, the bioconversion performance of C2 lignin was more outstanding. The P. putida KT2440 cell amount reached the maximum of 9.3 × 10 7 CFU/mL in the C2 medium, which was 37.9 and 82.4% higher than that in the C1 and C3 medium, respectively. Accordingly, PHA concentration reached 137 mg/L within the C2 medium, which was 41.2 and 149.1% higher than the C1 and C3 medium, respectively. Overall, C-lignin, with a nonetherified catechol structure and low molecular weight, benefits its microbial conversion significantly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Application of a Pyroprobe-Deuterium NMR System: Deuterium Tracing and Mechanistic Study of Upgrading Process for Lignin Model Compounds

In this study, a pyroprobe-deuterium (2H) NMR system has been used to identify isotopomer products formed during the deuteration and ring opening of lignin model compounds. Several common model compounds for lignin and its upgraded products, including guaiacol, syringol, toluene, p-xylene, phenol, catechol, cyclohexane, methylcyclohexane, and methylcyclopentane, have been examined for selective ring opening. Similar pathways for upgrading of toluene and p-xylene has been found, which will undergo hydrogenation, methyl group elimination, and ring opening process, and benzene, cyclohexane, and methylcyclohexane have been found as major intermediates before ring opening. Very interestingly, the 2H NMR analysis for the deuterium-traced ring opening of catechol on Ir/..gamma..-Al2O3 is almost identical to the ring opening process for phenol. The ring opening processes for guaiacol and syringol appeared to be very complicated, as expected. Benzene, phenol, toluene, cyclohexane, and methylcyclohexane have been determined to be the major products.

09 BIOMASS FUELS↗

Rational Design of a Multifunctional Binder for High-Capacity Silicon-Based Anodes

Although several principles have been recognized to fabricate a nominal "better" binder, there continues to be a lack of a rational design and synthesis approach that would meet the robust criteria required for silicon (Si) anodes. Herein, we report a synthetic polymer binder, i.e., catechol-functionalized chitosan cross-linked by glutaraldehyde (CS-CG+GA), that serves dual functionalities: (a) wetness-resistant adhesion capability via catechol grafting and (b) mechanical robustness via in situ formation of a three-dimensional (3D) network. A SiNP-based anode with a designed functional polymer network (CS-CG10%+6%GA) exhibits a capacity retention of 91.5% after 100 cycles (2144 +/- 14 mAh/g). Properties that are traditionally considered to be advantageous, including stronger adhesion strength and higher mechanical robustness, do not always improve the binder performance. A clear relationship between these properties and ultimate electrochemical performance is established by assessing the rheological behavior, mechanical property, adhesion force, peel stress, morphology evolution, and semiquantitative evaluation. This study provides a clear path for the rational design of high-performance functional polymer binders for not only Si-based electrodes but also other types of alloy and conversion-based electrodes.

Cao, Peng-Fei↗

Nuclear Resonance Vibrational Spectroscopy Definition of O 2 Intermediates in an Extradiol Dioxygenase: Correlation to Crystallography and Reactivity

The extradiol dioxygenases are a large subclass of mononuclear nonheme Fe enzymes that catalyze the oxidative cleavage of catechols distal to their OH groups. These enzymes are important in bioremediation, and there has been significant interest in understanding how they activate O 2 . The extradiol dioxygenase homoprotocatechuate 2,3-dioxygenase (HPCD) provides an opportunity to study this process, as two O 2 intermediates have been trapped and crystallographically defined using the slow substrate 4-nitrocatechol (4NC): a side-on Fe–O 2 –4NC species and a Fe–O 2 –4NC peroxy bridged species. Also with 4NC, two solution intermediates have been trapped in the H200N variant, where H200 provides a second-sphere hydrogen bond in the wild-type enzyme. While the electronic structure of these solution intermediates has been defined previously as Fe III -superoxo-catecholate and Fe III -peroxy-semiquinone, their geometric structures are unknown. Nuclear resonance vibrational spectroscopy (NRVS) is an important tool for structural definition of nonheme Fe–O 2 intermediates, as all normal modes with Fe displacement have intensity in the NRVS spectrum. In this study, NRVS is used to define the geometric structure of the H200N–4NC solution intermediates in HPCD as an end-on Fe III -superoxo-catecholate and an end-on Fe III -hydroperoxo-semiquinone. Parallel calculations are performed to define the electronic structures and protonation states of the crystallographically defined wild-type HPCD–4NC intermediates, where the side-on intermediate is found to be a Fe III -hydroperoxo-semiquinone. The assignment of this crystallographic intermediate is validated by correlation to the NRVS data through computational removal of H200. While the side-on hydroperoxo semiquinone intermediate is computationally found to be nonreactive in peroxide bridge formation, it is isoenergetic with a superoxo catecholate species that is competent in performing this reaction. In conclusion, this study provides insight into the relative reactivities of Fe III -superoxo and Fe III -hydroperoxo intermediates in nonheme Fe enzymes and into the role H200 plays in facilitating extradiol catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interactive Materials for Bidirectional Redox-Based Communication

Emerging research indicates that biology routinely uses diffusible redox-active molecules to mediate communication that can span biological systems (e.g., nervous and immune) and even kingdoms (e.g., a microbiome and its plant/animal host). This redox modality also provides new opportunities to create interactive materials that can communicate with living systems. Here in this paper, it is reported that the fabrication of a redox-active hydrogel film can autonomously synthesize a H 2 O 2 signaling molecule for communication with a bacterial population. Specifically, a catechol-conjugated/crosslinked 4-armed thiolated poly(ethylene glycol) hydrogel film is electrochemically fabricated in which the added catechol moieties confer redox activity: the film can accept electrons from biological reductants (e.g., ascorbate) and donate electrons to O 2 to generate H 2 O 2 . Electron-transfer from an Escherichia coli culture poises this film to generate the H 2 O 2 signaling molecule that can induce bacterial gene expression from a redox-responsive operon. Overall, this work demonstrates that catecholic materials can participate in redox-based interactions that elicit specific biological responses, and also suggests the possibility that natural phenolics may be a ubiquitous biological example of interactive materials.

electrobiofabrication↗

Understanding the influence of solvents on the Pt-catalyzed hydrodeoxygenation of guaiacol

Bio-oil derived from fast pyrolysis of lignocellulosic biomass needs to be deoxygenated to become a substitute for petroleum fuels. Here, we study the hydrodeoxygenation mechanism of guaiacol, a bio-oil model compound derived from the lignin fraction of biomass, on Pt(1 1 1) terrace sites in the presence of water, diethyl ether, 1-butanol, and n-hexane as solvent. Using first-principles periodic density functional theory (DFT) calculations and mean-field microkinetic reactor modeling, a detailed reaction mechanism is investigated targeting various products such as catechol, phenol, anisole, benzene, cyclohexanone, and cyclohexanol. Solvent phase DFT outcomes are mostly similar to that of the vapor phase; however, microkinetic modeling results suggest that rate controlling species and transition states differ somewhat in the various reaction environments. Catechol was found to be the major aromatic product across all reaction environments. Over Pt(1 1 1), unsaturated monooxygenate production from catechol is unlikely.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, characterization and catalytic activity of indium substituted nanocrystalline Mobil Five (MFI) zeolite

Highlights: • In situ modification of the MFI zeolite by incorporation of indium. • The samples were characterized by XRD, FTIR, TGA, UV–vis (DRS), SAA, EDX and SEM. • The incorporation of indium was confirmed by XRD, FT-IR, UV–vis (DRS), EDX and TGA. • Hydroxylation of phenol reaction was studied on the synthesized catalysts. - Abstract: A series of indium doped Mobil Five (MFI) zeolite were synthesized hydrothermally with silicon to aluminium and indium molar ratio of 100 and with aluminium to indium molar ratios of 1:1, 2:1 and 3:1. The MFI zeolite phase was identified by XRD and FT-IR analysis. In XRD analysis the prominent peaks were observed at 2θ values of around 6.5° and 23° with a few additional shoulder peaks in case of all the indium incorporated samples suggesting formation of pure phase of the MFI zeolite. All the samples under the present investigation were found to exhibit high crystallinity (∼92%). The crystallite sizes of the samples were found to vary from about 49 to 55 nm. IR results confirmed the formation of MFI zeolite in all cases showing distinct absorbance bands near 1080, 790, 540, 450 and 990 cm{sup −1}. TG analysis of In-MFI zeolites showed mass losses in three different steps which are attributed to the loss due to adsorbed water molecules and the two types TPA{sup +} cations. Further, the UV–vis (DRS) studies reflected the position of the indium metal in the zeolite framework. Surface area analysis of the synthesized samples was carried out to characterize the synthesized samples The analysis showed that the specific surface area ranged from ∼357 to ∼361 m{sup 2} g{sup −1} and the pore volume of the synthesized samples ranged from 0.177 to 0.182 cm{sup 3} g{sup −1}. The scanning electron microscopy studies showed the structure of the samples to be rectangular and twinned rectangular shaped. The EDX analysis was carried out for confirmation of Si, Al and In in zeolite frame work. The catalytic activities of the synthesized samples were investigated with respect to hydroxylation of phenol, in which catechol and hydroquinone were found to be the major products. It is observed that under all reaction conditions catechol selectivity was higher than the hydroquinone selectivity. In-MFI zeolites were successfully synthesized and were used as an effective catalyst for the hydroxylation of phenol to synthesize catechol and hydroquinone as the major product.

36 MATERIALS SCIENCE↗

Corrosion Susceptibility of Cr–Mo Steels and Ferritic Stainless Steels in Biomass-Derived Pyrolysis Oil Constituents

In this work, to better understand and evaluate the corrosion performance of candidate structural steels and ferritic stainless steels for production, transport, and storage of biomass pyrolysis oils, corrosion studies were conducted in selected organic constituents of bio-oils, including catechol, formic acid, and their mixtures as well as lactobionic acid, using electrochemical impedance spectroscopy. R 2 , the resistance against corrosion reaction, was obtained by fitting measured impedance spectra into an equivalent circuit. The values of R 2 were then used to assess corrosion resistance of the steels in each organic constituent and mixture. Type 410 and 430 stainless steels were resistant to corrosion in all tested organic constituents, while 2.25Cr-1Mo steel was not. 9Cr-1Mo steel was corrosion resistant in catechol but not in the other mixtures that contained organic acids. On the basis of the results of this work, it is suggested that the corrosion resistance against organic acids is attributed to formation of a Cr-rich passive film that requires stainless steels with critical Cr levels in excess of approximately 11 wt %. In catechol-only solution, lower levels of Cr intermediate between that of 2.25Cr-1Mo steel and 9Cr-1Mo steel appeared sufficient.

36 MATERIALS SCIENCE↗

Tuning the zeolite acidity enables selectivity control by suppressing ketene formation in lignin catalytic pyrolysis

Unveiling catalytic mechanisms at a molecular level aids rational catalyst design and selectivity control for process optimization. In this study, we find that the Brønsted acid site density of the zeolite catalyst efficiently controls the guaiacol catalytic pyrolysis mechanism. Guaiacol demethylation to catechol initiates the reaction, as evidenced by the detected methyl radicals. The mechanism branches to form either fulvenone (c-C 5 H 4 = C = O), a reactive ketene intermediate, by catechol dehydration, or phenol by acid-catalyzed dehydroxylation. At high Brønsted acid site density, fulvenone formation is inhibited due to surface coordination configuration of its precursor, catechol. By quantifying reactive intermediates and products utilizing operando photoelectron photoion coincidence spectroscopy, we find evidence that ketene suppression is responsible for the fivefold phenol selectivity increase. Complementary fulvenone reaction pathway calculations, along with 29 Si NMR-MAS spectroscopy results corroborate the mechanism. The proposed, flexible operando approach is applicable to a broad variety of heterogeneous catalytic reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synergistic effects of Ni and acid sites for hydrogenation and C–O bond cleavage of substituted phenols

The cleavage of C–O bonds in phenol, catechol, and guaiacol has been explored with mono- and dualfunctional catalysts containing Ni and/or HZSM-5 in the aqueous phase. The aromatic ring of phenol is hydrogenated in the first step, and the C–O bond of the resulting cyclohexanol is dehydrated in sequence. The initial turnover frequency (TOF) of phenol hydrodeoxygenation increases in parallel with the acid site concentration irrespective of the concentration of the accessible surface Ni atoms. For catechol and guaiacol conversion, Ni catalyzes the hydrogenolysis of the C–O bonds in addition to arene hydrogenation. For catechol, the hydrogenation of the aromatic ring and the hydrogenolysis of the phenolic –OH group occur in parallel with a ratio of 8 : 1. The saturated cyclohexane-1,2-diol can be further dehydrated over HZSM-5 or hydrogenolyzed on Ni to complete hydrodeoxygenation. Guaiacol undergoes primarily hydrogenolysis (75%) to phenol via demethoxylation, and the hydrogenation route accounts for only 25%. This is attributed to the steric effects arising from the adjacent sp3 hybrid O–CH3 group. 2-Methoxycyclohexanol (from guaiacol hydrogenation) reacts further either via hydrogenolysis by Ni to cyclohexanol or via acid catalyzed demethoxylation and rearrangement steps followed by the subsequent hydrogenation of the intermediately formed olefins. On Ni/HZSM-5, the hydrodeoxygenation activities are much higher for the phenolic monomers than for their respective saturated analogues, pointing to the importance of sp2 orbitals. The presence of proximal acid sites increases the activities of Ni in the presence of H2 by a synergistic action.

Song, Wenji↗

Ni3P as a high-performance catalytic phase for the hydrodeoxygenation of phenolic compounds

The catalytic performance of an unsupported Ni2P in the aqueous phase hydrodeoxygenation (HDO) of phenol was investigated. It was found that the unsupported Ni2P was water-sensitive, being transformed stepwise, first to an amorphous phase and then to Ni5P2 and Ni12P5, and finally to Ni3P in the presence of water at elevated temperatures. Nonetheless, the generated Ni3P phase exhibited extraordinary hydrogenation activity at low temperatures and high HDO activity at high temperatures. The unsupported Ni3P was more active for the hydrogenation of the aromatic ring in the phenol molecule than Pd/SiO2 (1.0 wt%). The unsupported Ni3P was catalytically active and stable in phenol HDO in both the aqueous phase and the organic phase. In addition to phenol, catechol and o-cresol were investigated in the HDO catalyzed by the unsupported Ni3P in both aqueous solution and decalin solution. The HDO reactivity decreased in the order of phenol > catechol > o-cresol in the aqueous phase, and in the order of phenol > o-cresol in the organic phase (catechol is insoluble in decalin). In the oil phase HDOs of phenol and o-cresol, the unsupported Ni3P exhibited superior hydrogenation activity to that of the unsupported Ni2P at low temperatures. J. A. L. and D. M. C. acknowledge support from the U.S. Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory is operated for the DOE by the Battelle Memorial Institute.

Yu, Zhiquan↗

Accelerating pathway evolution by increasing the gene dosage of chromosomal segments

Experimental evolution is a critical tool in many disciplines, including metabolic engineering and synthetic biology. However, current methods rely on the chance occurrence of a key step that can dramatically accelerate evolution in natural systems, namely increased gene dosage. Our studies sought to induce the targeted amplification of chromosomal segments to facilitate rapid evolution. Since increased gene dosage confers novel phenotypes and genetic redundancy, we developed a method, Evolution by Amplification and Synthetic Biology (EASy), to create tandem arrays of chromosomal regions. In Acinetobacter baylyi , EASy was demonstrated on an important bioenergy problem, the catabolism of lignin-derived aromatic compounds. The initial focus on guaiacol (2-methoxyphenol), a common lignin degradation product, led to the discovery of Amycolatopsis genes ( gcoAB ) encoding a cytochrome P450 enzyme that converts guaiacol to catechol. However, chromosomal integration of gcoAB in Pseudomonas putida or A. baylyi did not enable guaiacol to be used as the sole carbon source despite catechol being a growth substrate. We report in ~1,000 generations, EASy yielded alleles that in single chromosomal copy confer growth on guaiacol. Different variants emerged, including fusions between GcoA and CatA (catechol 1,2-dioxygenase). This study illustrates the power of harnessing chromosomal gene amplification to accelerate the evolution of desirable traits.

09 BIOMASS FUELS↗

Catecholaminergic effects of prolonged head-down bed rest

Prolonged head-down bed rest (HDBR) provides a model for examining responses to chronic weightlessness in humans. Eight healthy volunteers underwent HDBR for 2 wk. Antecubital venous blood was sampled for plasma levels of catechols [norepinephrine (NE), epinephrine, dopamine, dihydroxyphenylalanine, dihydroxyphenylglycol, and dihydroxyphenylacetic acid] after supine rest on a control (C) day and after 4 h and 7 and 14 days of HDBR. Urine was collected after 2 h of supine rest during day C, 2 h before HDBR, and during the intervals 1-4, 4-24, 144-168 (day 7), and 312-336 h (day 14) of HDBR. All subjects had decreased plasma and blood volumes (mean 16%), atriopeptin levels (31%), and peripheral venous pressure (26%) after HDBR. NE excretion on day 14 of HDBR was decreased by 35% from that on day C, without further trends as HDBR continued, whereas plasma levels were only variably and nonsignificantly decreased. Excretion rates of dihydroxyphenylglycol and dihydroxyphenylalanine decreased slightly during HDBR; excretion rates of epinephrine, dopamine, and dihydroxyphenylacetic acid and plasma levels of catechols were unchanged. The results suggest that HDBR produces sustained inhibition of sympathoneural release, turnover, and synthesis of NE without affecting adrenomedullary secretion or renal dopamine production. Concurrent hypovolemia probably interferes with detection of sympathoinhibition by plasma levels of NE and other catechols in this setting. Sympathoinhibition, despite decreased blood volume, may help to explain orthostatic intolerance in astronauts returning from spaceflights.

Non-NASA Center↗

High-Performance Mesostructured Organic Hybrid Pseudocapacitor Electrodes

The electrodes of a hybrid electrochemical capacitor which utilize the quinone (Q)-hydroquinone (QH 2 ) couple, a prototypical organic redox system known to provide fast and reversible proton-coupled electron-transfer reactions, are deterministically mesostructured via a colloidal templating strategy to provide good ion and electron transport pathways, enabling a high rate performance. Specifically, a conducting polymer, polypyrrole (PPy), is functionalized with a pseudocapacitive material, a Q/QH 2 -containing catechol derivative, by noncovalent interactions. The mesostructure of this hybrid material is formed into an ordered 3D porous structure by a polystyrene colloidal crystal template-assisted electrosynthesis. The catechol derivative is sufficiently bound to the PPy through noncovalent interactions to provide a volumetric capacitance as high as ≈130 F cm –3 and a capacitance retention of ≈75% over 10 000 charging/discharging cycles. Furthermore, when compared with a randomly structured electrode, the deterministically structured electrode exhibits an improved rate performance due to the mesostructure facilitated electron and ion transport.

36 MATERIALS SCIENCE↗