Search NASA⌕ Search

SEARCH · Search NASA

Results for “cellulose content”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Data from: High temperatures and low soil moisture synergistically reduce switchgrass yields from marginal field sites and inhibit fermentation

‘Marginal lands’ are low productivity sites abandoned from agriculture for reasons such as low or high soil water content, challenging topography, or nutrient deficiency. To avoid competition with crop production, cellulosic bio- energy crops have been proposed for cultivation on marginal lands, however on these sites they may be more strongly affected by environmental stresses such as low soil water content. In this study we used rainout shelters to in- duce low soil moisture on marginal lands and determine the effect of soil water stress on switchgrass growth and the subsequent production of bioetha- nol. Five marginal land sites that span a latitudinal gradient in Michigan and Wisconsin were planted to switchgrass in 2013 and during the 2018–2021 growing seasons were exposed to reduced precipitation under rainout shelters in comparison to ambient precipitation. The effect of reduced precipitation was related to the environmental conditions at each site and biofuel produc- tion metrics (switchgrass biomass yields and composition and ethanol pro- duction). During the first year (2018), the rainout shelters were designed with 60% rain exclusion, which did not affect biomass yields compared to ambient conditions at any of the field sites, but decreased switchgrass fermentability at the Wisconsin Central–Hancock site. In subsequent years, the shelters were redesigned to fully exclude rainfall, which led to reduced biomass yields and inhibited fermentation for three sites. When switchgrass was grown in soils with large reductions in moisture and increases in temperature, the potential for biofuel production was significantly reduced, exposing some of the chal- lenges associated with producing biofuels from lignocellulosic biomass grown under drought conditions.

bioethanol↗

Hemicellulose Modulates Nanoscale Lignin Architecture in Synthetic Plant Cell Walls

Cellulose, hemicellulose, and lignin─the most abundant biopolymers on Earth─compose the structural matrix of plant biomass, providing renewable resources critical to bioenergy and sustainable materials. Despite their importance, the nanoscale mechanochemical processes underlying lignocellulose assembly during plant secondary cell wall formation remain poorly understood, hindering advancements in biomass conversion technologies. Here, in this study, we synthesize a biomimetic model system comprising cellulose–hemicellulose nanofibrils (CHN) to examine guaiacyl lignin polymerization in a physiologically relevant context. Using advanced nanocharacterization─scattering-type scanning near-field optical microscopy (s-SNOM) with infrared nanospectroscopy coupled to solid-state nuclear magnetic resonance (NMR)─we reveal that hemicellulose presence considerably modulates lignin deposition and alters its interunit bond distribution. Specifically, hemicellulose-rich environments dramatically reduce lignin deposition by approximately 50% and yield highly condensed lignin structures characterized by severely reduced β–O–4′ linkages (<2%) and suppressed β–β′ linkages. Conversely, cellulose-alone scaffolds support notably higher β–O–4′ content (∼10%), resulting in a more uniform nanoscale lignin coating. Our work helps explain how accessible hemicellulose sites, both sterically and chemically, direct radical coupling during lignification, fundamentally reshaping lignin’s nanoscale architecture. These findings deepen our mechanistic understanding of plant cell wall biosynthesis and inform strategies aimed at enhancing biomass deconstruction efficiency for sustainable bioenergy applications.

NMR↗

Uncovering Sequence and Structural Characteristics of Fungal Expansin‐Related Proteins With Potential to Drive Substrate Targeting

Expansins loosen plant cell wall networks through disrupting non-covalent bonds between cellulose microfibrils and matrix polysaccharides. Whereas expansins were first discovered in plants, expansin-related proteins have since been identified in bacteria and fungi. The biological function of microbial expansins remains unclear; however, several studies have shown distinct binding preferences toward different structural polysaccharides. Earlier studies of bacterial expansin-related proteins uncovered sequence and structural features that correlate to substrate binding. Herein, 20 fungal expansin-related sequences were recombinantly produced in Komagataella phaffii, and the purified proteins were compared in terms of substrate binding to cellulosic and chitinous substrates. The impact of pH on the zeta potential of prioritized substrates was also measured, and Principal Component Analysis was performed to uncover correlations between protein characteristics (e.g., pI, hydrophobicity, surface charge distribution) and measured substrate binding preferences. Whereas acidic proteins with a predicted pI less than 5.0 preferentially bound to chitin, basic proteins with pI greater than 8.0 preferentially bound to xylan and xylan-containing fiber. Similar to many cellulases, binding to cellulose was correlated to relatively high aromatic amino acid content in the protein sequence and presence of a carbohydrate binding module (CBM), which in the case of expansins is a C-terminal CBM63. Whereas overall sequence characteristics could be correlated to substrate binding preference, the identity of amino acids occupying conserved positions that impact protein activity was better correlated with loosenin versus expansin classifications.

chitin↗

Galactosylation of xyloglucan is essential for the stabilization of the actin cytoskeleton and endomembrane system through the proper assembly of cell walls

Abstract Xyloglucan, a major hemicellulose, interacts with cellulose and pectin to assemble primary cell walls in plants. Loss of the xyloglucan galactosyltransferase MURUS3 (MUR3) leads to the deficiency of galactosylated xyloglucan and perturbs plant growth. However, it is unclear whether defects in xyloglucan galactosylation influence the synthesis of other wall polysaccharides, cell wall integrity, cytoskeleton behaviour, and endomembrane homeostasis. Here, we found that in mur3-7 etiolated seedlings cellulose was reduced, CELLULOSE SYNTHASE (CESA) genes were down-regulated, the density and mobility of cellulose synthase complexes (CSCs) were decreased, and cellulose microfibrils become discontinuous. Pectin, rhamnogalacturonan II (RGII), and boron contents were reduced in mur3-7 plants, and B-RGII cross-linking was abnormal. Wall porosity and thickness were significantly increased in mur3-7 seedlings. Endomembrane aggregation was also apparent in the mur3-7 mutant. Furthermore, mutant seedlings and their actin filaments were more sensitive to Latrunculin A (LatA) treatment. However, all defects in mur3-7 mutants were substantially restored by exogenous boric acid application. Our study reveals the importance of MUR3-mediated xyloglucan galactosylation for cell wall structural assembly and homeostasis, which is required for the stabilization of the actin cytoskeleton and the endomembrane system.

59 BASIC BIOLOGICAL SCIENCES↗

Nitrogen Fertilizer, Arbuscular Mycorrhizal Fungi, and Soil Nematodes Affect Lignin Quality and Quantity in Switchgrass (Panicum virgatum L.)

Plant lignin content and composition, which limit cell wall digestibility and efficiency of cellulose conversion to bioethanol, can be influenced by belowground biotic and abiotic factors. Switchgrass (Panicum virgatum L.) is a leading lignocellulosic biofuel crop and forms strong belowground associations with arbuscular mycorrhizal fungi (AMF), is susceptible to belowground plant-parasitic nematodes (PPN), and when grown in monoculture generally requires nitrogen (N) fertilization. The main objectives of the study were to investigate the effects of N fertilizer and belowground organisms on lignin content and composition of switchgrass. Here, leaf, stem, and root tissues were evaluated separately to test whether these factors had varying belowground (local) or aboveground (systemic) effects on plants. These factors were manipulated in a field study in 2017 using biocide applications to reduce soil fungi and nematodes. Combined biocide application reduced p-hydroxyphenyl (H) unit abundance in the leaves by 14% and increased the syringyl:guaiacyl (S:G) ratio in stems by 2%. Application of fungicide alone increased stem syringyl (S) unit by 12.4% as compared with control plots, and 11.1% as compared with nematicide plots. Overall, fertilizer increased total stem lignin by 3%, stem S unit by 6.7%, and stem S:G ratio by 10%, whereas it reduced the amount of H-unit in the roots by 11%. While the effects of N fertilizer were more pronounced in this study, changes to soil organisms had similar magnitudes of effect for some measures of lignin, indicating that these belowground interactions may be important for growers to consider in the future.

59 BASIC BIOLOGICAL SCIENCES↗

Comparison of the Chemical Composition of Liquids from the Pyrolysis and Hydrothermal Liquefaction of Lignocellulosic Materials

Major differences in thermal stability and hydrotreatment behavior of HTL and pyrolysis oils have been reported in the literature. However, little is known about the variations in the chemical composition of these oils that could explain such differences. Two commercial wood pyrolysis oils (Pyrovac and BTG), and their water-soluble (WS) and water-insoluble fractions (WIS) were analyzed and compared with the aqueous (WS WD-57 ) and oily (WIS WS-57 ) fractions obtained from hydrothermal liquefaction (HTL) of Douglas-fir. The samples were characterized by GC/MS, Karl Fischer titration, carbonyl content, total acid number, elemental composition, calorific value, proximate analysis, Fourier Transform Infrared Spectroscopy (FTIR), Folin-Ciocalteu (FC), and UV fluorescence. All the fractions were also analyzed by Fourier Transform Ion Cyclotron Resonance Mass Spectroscopy (FT-ICR-MS) and by Electrospray Ionization (EI). The most prevalent class of compounds in the water insoluble phases were phenols derived from lignin. Water-soluble phases contain mostly the oxygenated compounds derived from cellulose and hemicellulose and were richer in carbonyl functional groups. The water content of the resulting aqueous phases were between: 65 (WS BTG ) and 96 (WS Pyrovac ) wt. %. The bio-oil from BTG has higher water content and lower HHV, compared to Pyrovac oil. The GC/MS results of BTG oil show the presence of a more prominent acetic acid peak and higher TAN number than the Pyrovac oil. The GC/MS of Pyrovac oil showed more obvious mono-phenol peaks. The quantification of this family by Folin-Ciocalteu method confirmed higher content of monophenolic compounds compared with the BTG oil. The lower thermal stability of pyrolysis oils compared with HTL biocrudes can be partially explained by the fact that pyrolysis oils (BTG and Pyrovac) contain carbohydrates while HTL biocrude (WIS WD-57 ) doesn’t. Thus, we decided to further investigate the chemical differences between the phenolic rich fractions insoluble in water and the holocellulose derived compounds soluble in water. Even after water extraction, the acid content of the water insoluble fraction from BTG (WISBTG) was higher than the acid content of the water insoluble fraction obtained by HTL (WISWSD-57). Likewise, the acid content of the aqueous phases derived from pyrolysis oils (WS Pyrovac , WS BTG ) was also higher than for the aqueous phase obtained by HTL (WSWSD-57). This result is in part due to the use of bases in the HTL process that neutralizes the acid formed in that process. Moreover, the starting feedstock may also influence the differences between the oils. Although, the UV-Fluorescence spectra, ICR-MS and the EI analyses showed some minor differences in the molecular weight and chemical make-up of the oligomers soluble and insoluble in water from pyrolysis and HTL; the differences observed were not large enough to justify the differences in behavior between these oils reported in the literature. Our results suggest that the differences observed between HTL biocrudes and pyrolysis oils are likely partially due to the presence of holocellulose derived products in the pyrolysis oils and higher acid contents.

09 BIOMASS FUELS↗

Ectopic Production of 3,4-Dihydroxybenzoate in Planta Affects Cellulose Structure and Organization

Lignocellulosic biomass is a highly sustainable and largely carbon dioxide neutral feedstock for the production of biofuels and advanced biomaterials. Although thermochemical pretreatment is typically used to increase the efficiency of cell wall deconstruction, genetic engineering of the major plant cell wall polymers, especially lignin, has shown promise as an alternative approach to reduce biomass recalcitrance. Poplar trees with reduced lignin content and altered composition were previously developed by overexpressing bacterial 3-dehydroshikimate dehydratase (QsuB) enzyme to divert carbon flux from the shikimate pathway. In this work, three transgenic poplar lines with increasing QsuB expression levels and different lignin contents were studied using small-angle neutron scattering (SANS) and wide-angle X-ray scattering (WAXS). SANS showed that although the cellulose microfibril cross-sectional dimension remained unchanged, the ordered organization of the microfibrils progressively decreased with increased QsuB expression. This was correlated with decreasing total lignin content in the QsuB lines. WAXS showed that the crystallite dimensions of cellulose microfibrils transverse to the growth direction were not affected by the QsuB expression, but the crystallite dimensions parallel to the growth direction were decreased by ~20%. Cellulose crystallinity was also decreased with increased QsuB expression, which could be related to high levels of 3,4-dihydroxybenzoate, the product of QsuB expression, disrupting microfibril crystallization. In addition, the cellulose microfibril orientation angle showed a bimodal distribution at higher QsuB expression levels. Altogether, this study provides new structural insights into the impact of ectopic synthesis of small-molecule metabolites on cellulose organization and structure that can be used for future efforts aimed at reducing biomass recalcitrance.

59 BASIC BIOLOGICAL SCIENCES↗

Transgenic Sugarcane–Oilcane: An Alternative Feedstock for the Production of Drop-in Fuel and Value-Added Bioproducts

The utilization of plants and other agricultural produce can partly offset petroleum dependency for energy requirements and can potentially provide sustainable solutions to global environmental problems. To this end, synthetic biology has shown great potential in developing transgenic bioenergy grasses such as sugarcane, sorghum, miscanthus, and energy cane that hyperaccumulate energy-rich lipid molecules in their vegetative tissues, such as leaves, stems, and roots. These perennial high-biomass transgenic C4 grasses are not targeted to grow on prime agricultural land and can be dedicatedly used to produce biofuels and other value-added bioproducts. Recently, sugarcane has been metabolically engineered to sequestrate carbon from juice towards biosynthesis of lipid molecules in the vegetative tissues. Transgenic sugarcane is referred to as “oilcane.” Transgenic sugarcane–oilcane has improved energy density due to an elevated lipid content in the vegetative tissues. Transgenic bioenergy crops cater to both cellulosic sugars and vegetative lipids, hence resulting in higher biofuel yield (biodiesel/renewable diesel and bioethanol) per unit area of cultivable land. In this book chapter, the genetic engineering of sugarcane and its bioprocessing are discussed to illustrate its development and use as an alternative feedstock for the production of biofuels (bio-jet fuel, biodiesel, and bioethanol) and value-added bioproducts.

Maitra, Shraddha↗

Graphene oxide precursor effects on 3D-printed carbon scaffolds

Manganese oxide (MnO 2 ), an earth-abundant material, is a promising component for energy storage devices, with uses in both pseudocapacitors and batteries. However, high MnO 2 loading often leads to reduced performance due to poor ion diffusion. 3D printing, particularly using the direct ink writing (DIW) technique, offers a solution by enabling the fabrication of electrodes with hierarchical porous structures and open channels that enhance mass transport and ion diffusion. Previous work demonstrated that 3D-printed graphene aerogels with MnO 2 coatings exhibited excellent electrochemical performance, even with thick electrodes, due to their optimized structure. Building on this work, the current study investigates the performance differences between aerogels developed using graphene oxide (GO) and reduced graphene oxide (rGO) as carbon precursors. Both materials were incorporated into thixotropic inks, 3D-printed into lattice structures, and carbonized. Despite expected similarities between the final graphene aerogel, rGO-based aerogels exhibited superior areal capacitance, compared to GO-based aerogels. These differences are attributed to the lower oxygen content and defect density of rGO, which influence its interaction with cellulose viscosifiers in the ink formulation. Brunauer–Emmett–Teller (BET) surface area analysis revealed that rGO aerogels exhibit a larger surface area and mesoporous structure, further enhancing their performance. When coated with MnO 2 , rGO-based aerogels maintained their superior capacitive behavior over GO-based aerogels. This study highlights the effect of carbon precursor on the end performance of graphene aerogels.

Materials science↗

Using Incremental Changes to Convert Lignocellulosic Feedstocks to Cellulosic Ethanol

One billion tons of biomass feedstocks have been identified for the production of renewable biofuels and biochemicals. This is one of the key carbon feedstocks to supply energy to the transportation sector for light duty, heavy duty and aviation fuels. Utilization of lignocellulosic feedstocks supports an improved energy security by reducing demand of petroleum imports, agricultural development, job creation, and reducing greenhouse gas emissions. To date, however, operational challenges have stymied the industrial production of large volumes of lignocellulosic-based fuels and chemicals. As a result, significant research investment has been led by the United States Department of Energy to understand and improve operational reliability at pioneer cellulosic biorefineries. In this perspective article lignocellulosic conversion technologies are described that have been adopted from the starch ethanol process. The developed process culminated in successful demonstration of 1,000-h integrated runs using several feedstocks, including switchgrass, energy sorghum, and two types of corn kernel fiber. This report highlights process development that solved several of the issues that plagued—and continue to plague—many in the cellulosic sugars space such as biomass feeding into equipment, high ash content, diversified co-product value, and others.

09 BIOMASS FUELS↗

Leveraging peptide–cellulose interactions to tailor the hierarchy and mechanics of peptide–polymer hybrids

Inspired by spider silk's hierarchical diversity, we leveraged peptide motifs with the capability to tune structural arrangement for controlling the mechanical properties of a conventional polymer framework. The addition of nanofiller with hydrogen bonding sites was used as another pathway towards hierarchical tuning via matrix–filler interactions. Specifically, peptide–polyurea hybrids (PPUs) were combined with cellulose nanocrystals (CNCs) to develop mechanically-tunable nanocomposites via tailored matrix–filler interactions (or peptide–cellulose interactions). In this material platform, we explored the effect of these matrix–filler interactions on the secondary structure, hierarchical ordering, and mechanical properties of the peptide hybrid nanocomposites. Interactions between the peptide matrix and CNCs occur in all of the PPU/CNC nanocomposites, preventing α-helical ordering, but promoting inter-molecular hydrogen bonded β-sheet formation. Depending on peptide and CNC content, the Young's modulus varies from 10 to 150 MPa. Unlike conventional cellulose-reinforced polymer nanocomposites, the mechanical properties of these composite materials are dictated by a balance of CNC reinforcement, peptidic ordering, and microphase-separated morphology. This research highlights that leveraging peptide–cellulose interactions is a strategy to create materials with targeted mechanical properties for a specific application using a limited selection of building blocks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cellulose acetate membranes exhibit exceptional monovalent to divalent cation selectivities

Salt transport properties of cellulose acetate membranes are reported for a series of chloride salts with mono- valent and divalent cations (LiCl, NaCl, MgCl 2 , CaCl 2 ). Measurements include salt permeability and sorption, with diffusivity values calculated from the permeability and sorption results. We report an exceptionally high LiCl/MgCl 2 selectivity of 750:1. Salts with similar valence (LiCl and NaCl; MgCl 2 and CaCl 2 ) have similar transport properties. The high monovalent/divalent selectivity arises from differences in both sorption and diffusion, with a LiCl/MgCl 2 solubility selectivity of about 11 and a diffusivity selectivity of about 70. Atomistic molecular dynamics simulations show that ions tend to reside in isolated clusters of water. Increasing ion charge strengthens ion–water interactions relative to ion–polymer interactions, explaining the reduced sorption of divalent ions. Diffusion of ions through the membrane occurs via hop-like motion between water clusters. Lithium diffuses faster than magnesium due to weaker ion–water coordination for lithium, which allows for greater mobility within water clusters and more frequent hopping. Altogether, our atomistic simulations suggest that the high LiCl/MgCl 2 selectivity is linked to cellulose acetate’s high water/salt selectivity and is a consequence of low water content and relatively uniform water distribution.

36 MATERIALS SCIENCE↗

Soil Sensors in Agriculture: From Unsustainable to Biodegradable

Commercially available bi-metallic temperature sensors have long exploited differential thermal expansions between materials to produce an actuation-induced readout from a bi-metal helix. When dispersed in agricultural land, electronic components are used to transmit information at the cost of an increased environmental footprint. This paper briefly recaps the proposed sensor, which employs a biodegradable bi-material helix composed of a polymer and metal. Proposed polymer sheetings of cellulose acetate and polylactic acid are characterized via TGA, DMA, and DSC to evaluate plasticizer content, shrinkage, and an appropriate sensor work-use range. Finally, the deflection of non-biodegradable bi-polymer strips is quantified for various combinations to determine if bi-polymer deflection is possible.

47 OTHER INSTRUMENTATION↗

Pectin methyltransferase QUASIMODO2 functions in the formation of seed coat mucilage in Arabidopsis

Pectin, cellulose, and hemicelluloses are major components of primary cell walls in plants. In addition to cell adhesion and expansion, pectin plays a central role in seed mucilage. Seed mucilage contains abundant pectic rhamnogalacturonan-I (RG-I) and lower amounts of homogalacturonan (HG), cellulose, and hemicelluloses. Previously, accumulated evidence has addressed the role of pectin RG-I in mucilage production and adherence. However, less is known about the function of pectin HG in seed coat mucilage formation. In this study, we analyzed a novel mutant, designated things fall apart2 (tfa2), which contains a mutation in HG methyltransferase QUASIMODO2 (QUA2). Etiolated tfa2 seedlings display short hypocotyls and adhesion defects similar to qua2 and tumorous shoot development2 (tsd2) alleles, and show seed mucilage defects. Here, the diminished uronic acid content and methylesterification degree of HG in mutant seed mucilage indicate the role of HG in the formation of seed mucilage. Cellulosic rays in mutant mucilage are collapsed. The epidermal cells of seed coat in tfa2 and tsd2 display deformed columellae and reduced radial wall thickness. Under polyethylene glycol treatment, seeds from these three mutant alleles exhibit reduced germination rates. Together, these data emphasize the requirement of pectic HG biosynthesis for the synthesis of seed mucilage, and the functions of different pectin domains together with cellulose in regulating its formation, expansion, and release.

59 BASIC BIOLOGICAL SCIENCES↗

A Novel Platform for Algal Biomass Production Using Cellulosic Mixotrophy (CeMix) (Final Technical Report)

This novel project, branded CeMIX for cellulosic mixotrophy, targets solutions for several technological barriers limiting the deployment of algae cultivation in sunny, arid regions (specifically the southwest United States). Opening up the region for algae cultivation could increase DOE’s resource assessments and biofuel potential for the U.S. Mixotrophic metabolism in support of liquid fuel production is completely dependent on the availability of waste organic carbon in order to avoid diversion of food resources for fuel production. The use of cellulosic sugar hydrolysate (CSH) produced via the NREL process provided a standardized carbon source for study of the underlying biochemistry and metabolic adjustments to mixotrophy. Mixotrophic metabolism uses both photosynthetic CO 2 fixation and sugar oxidation to improve biomass productivity and harvest yield. The project was high-risk, high-reward in the sense that adding organic carbon to algal cultivation is an invitation for rapid-growth, heterotrophic contaminants to overtake the culture and consume mineral nutrients needed for algal growth. To help evade this outcome the project focused on acidophilic red algae that require low pH conditions with 40-48°C optimal temperature profiles that define them as low-range thermophiles. This is the only project in the BETO portfolio to utilize extreme conditions of low pH and high operating temperatures to control pathogens and competitors in mass culture. The project yielded five major outcomes. 1) Harvest densities of 5-10 g ash-free dry weight are easily achieved, providing a 10-fold reduction in water required and dewatering demand. 2) Catabolic repression of photosynthesis in G. sulphuraria is conditionally repressed by low oxygen. 3) Mixotrophic growth on cellulosic hydrolysate consumes all C6 and C5 sugars concomitant with increases in floridean starch with little change in lipid content. Protein content can be manipulated between 35 and 54 wt% by varying the C:N molar ratio from 10:1 to 20:1, respectively. 4) Mixotrophic cultures with up to 50 mM total sugar are remarkably stable at pH 2.5 and daily average reactor temperatures of 40°C. 5) Capital costs for glass tubular photobioreactors are prohibitive for liquid fuel production using a hydrothermal liquefaction processing pathway. The economic outlook for covered raceway ponds is better with a project minimum fuel selling price at $3.32 dm 3 GE -1 .

09 BIOMASS FUELS↗

High solids loading biorefinery for the production of cellulosic sugars from bioenergy sorghum

A novel process applying high solids loading in chemical-free pretreatment and enzymatic hydrolysis was developed to produce sugars from bioenergy sorghum. Hydrothermal pretreatment with 50% solids loading was performed in a pilot scale continuous reactor followed by disc refining. Sugars were extracted from the enzymatic hydrolysis at 10% to 50% solids content using fed-batch operations. Here, three surfactants (Tween 80, PEG 4000, and PEG 6000) were evaluated to increase sugar yields. Hydrolysis using 2% PEG 4000 had the highest sugar yields. Glucose concentrations of 105, 130, and 147 g/L were obtained from the reaction at 30%, 40%, and 50% solids content, respectively. The maximum sugar concentration of the hydrolysate, including glucose and xylose, obtained was 232 g/L. Additionally, the glucose recovery (73.14%) was increased compared to that of the batch reaction (52.74%) by using two- stage enzymatic hydrolysis combined with fed-batch operation at 50% w/v solids content.

09 BIOMASS FUELS↗

Macroscale properties and atomic-scale mechanisms of ash removal in low-temperature hydrothermal carbonization

Biogenic ash is a significant impediment to the utilization of agricultural residues in biofuel production. Such challenge can be addressed by various treatments, as demonstrated in this study on the experimental and computational mechanisms involved in the hydrothermal treatment (HT) of wheat straw. A combination of classical (all-atom) molecular dynamics simulations of cellulose carrying silica and calcium species, along with first principles quantum chemical calculations, indicates the dissociation of inorganics from the cellulose with increased HT temperature. Here, this observation is confirmed by experimental evidence of effective ash removal by HT, showing at least 50% removal of sulfur, chlorine, potassium, and calcium, and 12.5% of silica, leading to a reduced total ash content (from 6.7% to 4.2%).Changes in structural features upon HT, such as surface cellular structure and porosity, were revealed, accompanied by an increased specific surface area (from 1.17 to 6.34 m 2 /g). Our simulations suggest that silica binds tightly to the hydrophobic face of cellulose at room temperature, but HT significantly reduces the binding free energy of association with both hydrophobic and hydrophilic surfaces. Most significantly, ash removal leads to an increased calorific value, rising from approximately 16 MJ/kg to about 19 MJ/kg, along with improved thermal behavior. The improved integration combustion index parameter S indicates that the combustion properties improve with ash removal efficiency. The proposed atomic-level mechanism for the observed removal of inorganics during mild HT underscores the potential of such treatment in producing energy-dense wheat straw, a widely available agricultural residue.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mild organosolv pretreatment of sugarcane bagasse with acetone/phenoxyethanol/water for enhanced sugar production

This study conducted mild organosolv pretreatment of sugarcane bagasse with acetone/phenoxyethanol/water (APW) solutions to improve sugar production in the subsequent enzymatic hydrolysis step. Here, the Box–Behnken design was used to optimize pretreatment conditions based on lignin removal. Further examination of the data revealed that lignin removal was positively correlated (R 2 > 0.95) with the combined severity factor (CSF). Pretreatment under the optimal conditions (125 °C–120 min, 0.17 M H 2 SO 4 , liquid–solid ratio of 15) led to 98.1% lignin removal and 74.5% cellulose digestibility compared to a low digestibility of 9.3% with raw sugarcane bagasse (SCB). Moreover, the APW process showed effective fractionation of pine, corn stalk and bamboo, and lignin removal was over 90%. The recovered lignin was characterized by 2D-HSQC NMR and 31P NMR, suggesting that the pretreatment resulted in breakage of β-O-4, total phenolic OH and H-units increased. However, the enzymatic hydrolysis efficiency (EHE) of samples with a lower lignin content (<4%) varied significantly. Correlations between various substrate-related factors of the pretreated SCB and EHE were analyzed to understand this observation. The results showed that the surface area of cellulose, lateral order index, CrI, and specific surface area were the predominant factors for enzymatic hydrolysis rather than lignin properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗