Search NASA⌕ Search

SEARCH · Search NASA

Results for “close-coupling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Electron-impact excitation of O III in the distorted-wave approximation

The 3P - 1D electron-impact excitation cross section within the ground configuration of doubly ionized oxygen is calculated in the distorted-wave approximation. An essential element of the present treatment is that orthogonality is not assumed between core and scattering orbitals of the same angular symmetry. Resonance structures are included through the use of quantum-defect theory. Near threshold the effect of an isolated autoionization resonance in the dominant 2D(0) partial wave is found to be important, in agreement with previous close-coupling results.

Pindzola, M. S.↗

Development of the propulsion simulator - A test tool applicable to V/STOL configurations

A turbine engine multi-mission propulsion simulator, capable of representing inlet/airframe/nozzle flowfield interactions for supersonic V/STOL aircraft wind tunnel models, is described. The propulsion simulator replaces conventional aero flow-through and jet effects models with a single model; flow field interactions modeled by the simulator may include close-coupled inlets and nozzles, non-axisymmetric vectoring exhaust nozzles, and forward canards mounted near the inlets and wings. Wind tunnel tests of the simulation system at Mach numbers up to 1.2 are reported for a model typical of a F-15 aircraft installation. The possibility of applying the simulator to advanced V/STOL design programs is also discussed.

Eigenmann, M. F.↗

Low speed aerodynamic characteristics of a vectored-engine-over-wing configuration

An investigation has been conducted in the Langley V/STOL tunnel to determine the low speed aerodynamic characteristics of a close-coupled canard-wing configuration using spanwise blowing and a vectored-engine-over-wing powered lift concept. The effects of spanwise blowing in conjunction with thrust vectoring are discussed. These effects were studied at M = 0.19 for a range of model angle of attack and engine nozzle pressure ratio. The results indicate combined use of spanwise blowing and thrust vectoring can provide significant performance improvements throughout the angle-of-attack range tested.

Leavitt, L. D.↗

Study of aerodynamic technology for VSTOL fighter attack aircraft

Vertical short takeoff aircraft capability, supersonic dash capability, and transonic agility were investigated for the development of Fighter/attack aircraft to be accommodated on ships smaller than present aircraft carriers. Topics covered include: (1) description of viable V/STOL fighter/attack configuration (a high wing, close-coupled canard, twin-engine, control configured aircraft) which meets or exceeds specified levels of vehicle performance; (2) estimates of vehicle aerodynamic characteristics and the methodology utilized to generate them; (3) description of propulsion system characteristics and vehicle mass properties; (4) identification of areas of aerodynamic uncertainty; and (5) a test program to investigate the areas of aerodynamic uncertainty in the conventional flight mode.

Burhans, W., Jr.↗

Study of aerodynamic technology for VSTOL fighter/attack aircraft, phase 1

A conceptual design study was performed of a vertical attitude takeoff and landing (VATOL) fighter/attack aircraft. The configuration has a close-coupled canard-delta wing, side two-dimensional ramp inlets, and two augmented turbofan engines with thrust vectoring capability. Performance and sensitivities to objective requirements were calculated. Aerodynamic characteristics were estimated based on contractor and NASA wind tunnel data. Computer simulations of VATOL transitions were performed. Successful transitions can be made, even with series post-stall instabilities, if reaction controls are properly phased. Principal aerodynamic uncertainties identified were post-stall aerodynamics, transonic aerodynamics with thrust vectoring and inlet performance in VATOL transition. A wind tunnel research program was recommended to resolve the aerodynamic uncertainties.

Driggers, H. H.↗

Effect of canard vertical location, size, and deflection on canard-wing interference at subsonic speeds

A generalized close-coupled canard-wing configuration was tested in a high speed 7 by 10 foot tunnel at Mach numbers of 0.40, 0.70, and 0.85 over an angle-of-attack range from -4 deg to 24 deg. Studies were made to determine the effects of canard vertical location, size, and deflection and wing leading-edge sweep on the longitudinal characteristics of the basic configuration. The two wings tested had thin symmetrical circular-arc airfoil sections with characteristically sharp leading edges swept at 60 deg and 44 deg. Two balances which allow separation of the canard-forebody contribution from the total forces and moments were used in this study.

Gloss, B. B.↗

Wind-tunnel investigation of highly maneuverable supersonic V/STOL fighter

Results from the initial wind-tunnel test of a large-scale, highly maneuverable supersonic V/STOL fighter model in the Ames 40- by 80-foot wind tunnel are summarized. The STOL configuration which was tested combined upper surface blowing and spanwise blowing to improve the lift characteristics over a wide angle-of-attack range. A close-coupled canard was added to this configuration to create a highly maneuverable STOL aircraft. The 7.28 m (24 ft) span model was powered by two J-97 turbojet engines, each producing 9340 N (2200 lb) thrust at a pressure ratio of 2. With the nozzle flap and aileron set at 30 deg, the model produced lift coefficients greater than 4. The model was longitudinally unstable because of the forward canard position and because of the large body area of fuselage, strake, and nacelles forward of the center of gravity.

Falarski, M. D.↗

Molecular collisions in a laser field - Effect of the laser linewidth

The effect of the laser linewidth on molecular collision processes taking place in a laser field is studied, using an approximation scheme that replaces the actual frequency distribution of the field by a finite number of frequencies and weights. The choice of the frequencies and weights is conveniently accomplished by the method of Gaussian quadrature. Close-coupling calculations are performed on model systems, and the results indicate that the neglect of the laser linewidth may be justified in most collision processes in a laser field.

Lee, H. W.↗

Dedicated nuclear facilities for electrolytic hydrogen production

An advanced technology, fully dedicated nuclear-electrolytic hydrogen production facility is presented. This plant will produce hydrogen and oxygen only and no electrical power will be generated for off-plant use. The conceptual design was based on hydrogen production to fill a pipeline at 1000 psi and a 3000 MW nuclear base, and the base-line facility nuclear-to-shaftpower and shaftpower-to-electricity subsystems, the water treatment subsystem, electricity-to-hydrogen subsystem, hydrogen compression, efficiency, and hydrogen production cost are discussed. The final conceptual design integrates a 3000 MWth high-temperature gas-cooled reactor operating at 980 C helium reactor-out temperature, direct dc electricity generation via acyclic generators, and high-current density, high-pressure electrolyzers based on the solid polymer electrolyte approach. All subsystems are close-coupled and optimally interfaced and pipeline hydrogen is produced at 1000 psi. Hydrogen costs were about half of the conventional nuclear electrolysis process.

Foh, S. E.↗

Control considerations for CCV fighters at high angles of attack

Wind tunnel and piloted simulation studies were conducted to investigate the potential high angle of attack control problems that are introduced by the use of the CCV concept of relaxed static pitch stability (RSS) on fighter aircraft. A conventional wing/aft tail design incorporating modest levels of static instability and a close-coupled canard/wing design exhibiting very high levels of instability was investigated. Two types of high angle of attack control problems can result from the use of RSS: pitch departures caused by coupling and deep stall trim. Avoidance of these problems requires that the airplane have sufficient nose-down pitch control at high angles of attack. The effectiveness of several pitch control configurations were investigated including conventional aft-mounted stabilators, wing-mounted elevators, canard-mounted flaps, and all-moveable canards. Varying the incidence of the canards was the most effective scheme; however, very large deflections may be required on highly unstable configurations to prevent pitch departure without sacrificing roll performance and to avoid deep stall trim. For situations where the high angle of attack pitch control requirement is not met, control laws were developed to inhibit the departure and to allow deep stall recovery. However, these schemes involve limiting airplane roll capability and therefore can potentially compromise maneuverability.

Nguyen, L. T.↗

An angular momentum approximation for molecular collisions in the presence of intense laser radiation

An approximation to a previously presented rigorous description of molecular (atom-atom) collisions occurring in the presence of intense radiation is investigated. This rigorous description explicitly considers the angular momentum transferred between the molecule and the radiation field in the absorption or emission of a photon, but involves a complicated system of close-coupled equations which must be solved independently for each projection M of the initial, total molecular angular momentum. (This is a direct consequence of the lack of rotational invariance in the molecule-field problem). These equations are solved for a model system which mimics the collision of a halogen with a rare gas atom. Empirical observations made in the course of performing these calculations lead to the development of an approximation which avoids the repeated calculations for each initial M. This orientational average approximation greatly reduces the effort required to describe the system, and for the model calculation, yields accurate results for field intensities as high as 10 GW/sq cm.

Devries, P. L.↗

Asymptotic effective potentials for electron-hydrogen scattering

The asymptotic effective potential for electron- or positron-hydrogen elastic scattering is derived, correct to order x to the -7th, where x is the positron projectile coordinate, using the Feshbach optical potential as a starting point in the manner of Kleinman et al (1968). To order x to the -6th the potential agrees with the close-coupling results of Seaton and Steenman-Clark (1977) but not to order x to the -7th, where the present calculation gives the result + or - 213/2(x to the 7th) for electron and positron respectively. This coefficient differs considerably from the approximate value of Seaton and Steenman-Clark, and the discrepancy is traced to the omission of d states in their calculation.

Drachman, R. J.↗

The linear and non-linear aerodynamics of three-surface aircraft concepts

It is noted that most modern fighter aircraft rely on vortex interaction to provide lift enhancement at maneuvering angles of attack. It is shown that the close-coupled horizontal canard in a three-surface configuration provides a control surface which in addition to its other control functions, can be used to optimize this vortex interaction. Attention is given to a study intended to provide a detailed understanding of the aerodynamics of this type of configuration. The discussion examines the results of this investigation and hypotheses are presented to explain the linear and nonlinear aerodynamic phenomena observed.

Agnew, J. W.↗

Computational study of alkali-metal-noble gas collisions in the presence of nonresonant lasers - Na + Xe + h/2/pi/omega sub 1 + h/2/pi/omega sub 2 system

The collision of Na with Xe in the presence of both the rhodamine-110 dye laser and the Nd-glass laser is investigated within a quantum-mechanical close-coupled formalism, utilizing ab initio potential curves and transition dipole matrix elements. Both one- and two-photon processes are investigated; the Na + Xe system is not asymptotically resonant with the radiation fields, so that these processes can only occur in the molecular collision region. The one-photon processes are found to have measurable cross sections at relatively low intensities; even the two-photon process has a significant section for field intensities as low as 10 MW/sq cm.

Devries, P. L.↗

Excitation of the b 3 Sigma u + state of H2 by electron impact - Semiclassical exchange potentials at intermediate energies

Integrated and differential cross sections for the excitation of the b 3 Sigma u + state of H2, from the ground state, by electron impact, are presented. The energy range of interest is 10.5 to 40.0 eV. The close-coupling equations for this process are solved in five different exchange approximations: exact two-electron exchange terms, no orthogonality; exact two-electron exchange terms, orthogonality; semiclassical exchange terms, no orthogonality, with barrier term; semiclassical exchange terms, no orthogonality, no barrier term; and semiclassical exchange terms, orthogonality, with barrier term. The purpose is to judge the reliability of the semiclassical exchange approximation for electronic excitation of molecules by electron impact at intermediate energies. The results are compared with recent theoretical estimates for the same process.

Weatherford, C. A.↗

A nonparametric identification method for a class of non-linear systems

A relatively simple nonparametric method for the identification of a class of close-coupled nonlinear multi-degree-of-freedom systems has been developed. The identification of arbitrary memoryless nonlinearities is possible through knowledge of the accelerations, velocities, and displacements of the various masses. These quantities are used to obtain the surfaces of the restoring forces as functions of the intermass displacements and velocities. The method was demonstrated by application to a four-degree-of-freedom system to identify the restoring forces. It is found that the identification results are relatively insensitive to measurement noise.

Udwadia, F. E.↗

In-flight jet engine noise measurement system

An instrumentation system in flight tests for noise research is described which utilizes miniature transducers to measure low-amplitude, high-frequency fluctuating pressures in a jet engine mounted under the wing of a turboprop aircraft. The system employs a rotor-mounted FM telemeter to acquire data from eight fan-blade-mounted transducers which are subjected to up to 75,000 g's of loading. Data is transmitted from the rotor to an antenna mounted in the inlet-duct wall using a low-power, close-coupled RF link. The blade pressures and other inlet and stator-vane fluctuating pressures are recorded on airborne, magnetic-tape recorders. The flight instrumentation described also includes PCM techniques to encode and record a variety of quasi-static measurements to provide engine and aircraft performance data. The instrumentation and experimental measurements are of value to an improved understanding of noise sources in jet engines and for the advancement of jet-engine ground noise testing techniques.

Knight, V. H., Jr.↗

A large-scale investigation of engine influence on inlet performance at angle-of-attack

A low-speed wind tunnel test was conducted in the NASA/Ames 40-x-80-foot wind tunnel to investigate the effect of engine/inlet flowfield interaction on inlet performance near flow separation. The effect of engine/inlet flowfield interaction was determined by comparing the performance of a large-scale subsonic inlet (CR = 1.26) close-coupled and remote-coupled to a TF-34 turbofan engine. The remote coupled inlet configuration removes the influence of the engine on the inlet flowfield and further, typifies conventional small-scale inlet test techniques which generally provide no simulation of turbomachinery effects. Test results indicated that engine interaction allows the inlet to operate with lower distortion levels at and beyond the separation angle-of-attack attained without engine interaction.

Hodder, B. K.↗